OKIN Refined Electric Technology CB1322 Control Box User Manual CB1322 x
OKIN Refined Electric Technology Co., Ltd. Control Box CB1322 x
Users Manual
Issue department:Bedding Division Product Function instruction CB.13.22.02 Date: Author: No:CB1322 Version: 1.1 Page 2 of 5 Function instruction Function Picture 1. 2017-08-23 Kyle Process of test 1.1. HEAD MOTOR Connect to head actuator,control by remote single: Click head up button on the remote, head actuator moves out, stop when released; Click head down button,head actuator moves in, stop when released; This function takes effect only by pressing the corresponding button on the remote. 1.2. FOOT MOTOR Connect to foot actuator,control by remote single: Click foot up button,foot actuator moves out,stop when released; Issue department:Bedding Division Product Function instruction CB.13.22.02 Date: Author: 2017-08-23 Kyle No:CB1322 Version: 1.1 Page 3 of 5 Click foot down button,foot actuator moves in,stop when released; This function takes effect only by pressing the corresponding button on the remote. 1.3. Massage Connect to head & Foot massage,control by remote: Click head massage + button,head massage strengthens by one level; Click head massage ‐ button,head massage weakenby one level; This function takes effect only by pressing the corresponding button on the remote. 1.4. Test for underbed light Click button of underbed light, turns on( or turns off ) the underbed light, switch the status once when click once; This function takes effect only by pressing the corresponding button on the remote. 1.5. SYNC port Connect with the same other Control box or Other accessories; 1.6. Power LED & PAIRING LED Power supply for control box, PAIRING LED of control box is blue, POWER LED is green。 1.7. Power Connect to the 29V DC; 1.8. RESET button Press and hold the RESET button(Corresponding Pair button),the Head, Foot actuators will moves to lower position. Long press is reset. 1.9. Pair Function Double click RESET button,pairing LED turns on,the control box enters into mode of code paring; Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the remote enters into mode of code paring; Issue department:Bedding Division Product Function instruction CB.13.22.02 Date: Author: 2017-08-23 Kyle No:CB1322 Version: 1.1 Page 4 of 5 The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that the code paring is successful; Press release theprocesses FLATbutton on remote ,the head and foot actuators moves to lower position(when t If fails,and repeat all the above; he actuator is free, can turn off the vibration motor and turn off the indicator light when press once ),stop when press any buton; 1.10. FLAT function This function takes effect only by pressing the corresponding button on the remote. 1.11. ZERO G position function Press and release ZERO G button on remote,the head and foot actuator moves to preset memory position,stop when press any button; This function takes effect only by pressing the corresponding button on the remote. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning: This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. JLDP.14.027.000 JLDP.05.032.000 R5.216.01.015C JLDP.10.023.000 R5.504.01.250 R5.217.01.016 R5.113.00.011 R5.413.01.005 RF.30.19.02 CB.13.22.02 R5.410.01.009 JLDQ.9.001.130C B.15226 B.15227 NO. 10 11 12 13 14 Product name Product code number Head Motor Foot Motor Massage Motor Massage Motor Cable Control Box Power Supply Power Cord B.15227 B.15226 JLDQ.9.001.130C R5.410.01.009 CB.13.22.02 JLDP.10.023.000 R5.217.01.016 ANSI power cord Y cable Patch cord of LED strip LED strip/ LED USB Socket/USB Double USB Chager 19Keys remote R5.504.01.250 R5.216.01.015C R5.413.01.005 R5.113.00.011 JLDP.05.032.000 JLDP.14.027.000 RF.30.19.02 M550 V1.3 20 17 0 7 31 John
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : baclsh93 Create Date : 2017:09:01 14:37:21+08:00 Modify Date : 2017:09:20 17:13:48-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:09:20 17:13:48-07:00 Format : application/pdf Title : Microsoft Word - CB1322_User Manual.docx Creator : baclsh93 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:fbbe3eae-dc59-4d09-8cc3-dfb0072f24ee Instance ID : uuid:cb3df9e1-823b-4d67-9cca-920eb3a4f2dc Page Count : 4EXIF Metadata provided by EXIF.tools