OKIN Refined Electric Technology CB3332 Control Box User Manual CB3332

Download:
Mirror Download [FCC.gov]
Document ID	3894021
Application ID	H2pytLhjLa2Db8UqxpDiEA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.01kB (350092 bits)
Date Submitted	2018-06-20 00:00:00
Date Available	2018-06-20 00:00:00
Creation Date	2018-05-28 16:56:48
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-06-19 22:00:20
Document Title	Microsoft Word - CB3332_User Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh51

Issue department：Bedding Division
Product Function
instruction
Date：
Author：
2018-05-17
Gary
No：CB3332
Version：
1.1
Page 1 of 5
CB.33.32.02
CB.33.32.02 Function instruction
1. Electrical configuration diagram：
CB.33.32.02
FCC: PCU-RF2512
IC:21319-RF2512
Issue department：Bedding Division
Product Function
instruction
Date：
Author：
No：CB3332
Version：
1.1
Page 2 of 5
CB.33.32.02
2. Function Picture
1.
2018-05-17
Gary
Process of test
1.1. HEAD MOTOR
Connect to head actuator,control by remote single:
Click head up button on the remote, head actuator moves out, stop when released；
Click head down button，head actuator moves in, stop when released；
This function takes effect only by pressing the corresponding button on the remote.
1.2. FOOT MOTOR
Connect to foot actuator,control by remote single:
Click foot up button，foot actuator moves out，stop when released；
Click foot down button，foot actuator moves in，stop when released；
Issue department：Bedding Division
Product Function
instruction
CB.33.32.02
Date：
Author：
2018-05-17
Gary
No：CB3332
Version：
1.1
Page 3 of 5
This function takes effect only by pressing the corresponding button on the remote.
1.3. Lumber MOTOR
Connect to foot actuator,control by remote single:
Click Lumber up button，foot actuator moves out，stop when released；
Click Lumber down button，foot actuator moves in，stop when released；
This function takes effect only by pressing the corresponding button on the remote.
1.4. Massage
Connect to head & Foot massage,control by remote:
Click head massage + button,head massage strengthens by one level;
Click head massage ‐ button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
1.5. Test for underbed light
Click button of underbed light, turns on( or turns off ) the underbed light, switch the status once when click once；
This function takes effect only by pressing the corresponding button on the remote.
1.6. SYNC port
Connect with the same other Control box or Other accessories;
1.7. Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box is blue, POWER LED is green。
1.8. Power
Connect to the 29V DC;
Issue department：Bedding Division
Product Function
instruction
CB.33.32.02
Date：
Author：
2018-05-17
Gary
No：CB3332
Version：
1.1
Page 4 of 5
1.9. RESET button
Press and hold the RESET button，the Head, Foot actuators will moves to lower position.
1.10. Pair Function
Double click RESET button，pairing LED turns on，the control box enters into mode of code paring；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
If fails, repeat all the processes above;
Issue department：Bedding Division
Product Function
instruction
Date：
Author：
2018-05-17
Gary
No：CB3332
Version：
1.1
Page 5 of 5
CB.33.32.02
FCC warning：
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada
licenceexempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclsh51
Create Date                     : 2018:05:28 16:56:48+08:00
Modify Date                     : 2018:06:19 22:00:20-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : baclsh51
Title                           : Microsoft Word - CB3332_User Manual
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:06:19 22:00:20-07:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:40c21b40-b5f7-46d6-9598-bd6927f888dd
Instance ID                     : uuid:f1cf6be8-21c6-4418-99e9-80e57395b309
Page Count                      : 5

EXIF Metadata provided by EXIF.tools