OKIN Refined Electric Technology JLDP-03 Wireless remote controller User Manual Control box x

OKIN Refined Electric Technology Co., Ltd. Wireless remote controller Control box x

User Manual

1、 Interface of the Control box1---connect to 24~29VDC/3A power supply910 423156781---connect to 24~29VDC/3A power supply2---connect to Head Motor 24~29VDC/3A3---connect to Feet Motor 24~29VDC/3A4---connect to LED 12VDC/1A (optional)5---connect to Feet Massage Motor 24~29VDC/0.3A6---connect to Feet Massage Motor 24~29VDC/0.3A7---connect to Head Massage Motor 24~29VDC/0.3A8---connect to Head Massage Motor 24~29VDC/0.3A9---wire control (anyone of 9 or 10 connect to another control box)10--wire control (anyone of 9 or 10 connect to another control box)2.Function description The control box must be used with the Remote Hand Control together. The detail please refer to the "Operating Manual of Remote Hand Control".3.Preparing two bases for simultaneous operationThe control system is designed to allow (2) split queen or (2) split king basesto work in unison with a onepiece mattress. In order for (2) adjustable bases towork simultaneously with one (1) hand control, only connect the two controlboxes in the connector 9 or 10 with the cable.5678
4.FCC STATEMENT FCC ID: PCU-JLDP-03 1. This device complies with Part 15 of the FCC Rules. Operation is subject tothe following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interferencethat may causeundesired operation.2. Changes or modifications not expressly approved by the party responsible forcompliance couldvoid the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for aClass B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled andused in accordance with the instructions, may cause harmful interference toradio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If thisinstallation. If thisequipment does cause harmful interference to radio or television reception, whichdetermined by turning the equipment off and on, the user is encouraged to try tocorrect theinterference by one or more of the following measures:　 Reorient or relocate the receiving antenna.　 Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to whichthe receiver isconnected.　 Consult the dealer or an experienced radio/TV technician for help.

Navigation menu