OPENBRAIN Technologies H3-002 Bluetooth Headset User Manual
OPENBRAIN Technologies Co., Ltd. Bluetooth Headset
User Manual
1
2
CONTENTS
Introduction ......................................................................................................................... 3
Safety Instructions . .............. ............... .............. .............. ............... .............. ............... ........ 3
Product Features ................................................................................................................. 3
What’s Included in the Package ........................................................................................ 4
Description of Parts ............................................................................................................ 4
Charging the H3 Battery ..................................................................................................... 4
Pairing H3 with Bluetooth Device ...................................................................................... 5
Switching the H3 ON/OFF................................................................................................... 5
Wearing the H3 .................................................................................................................... 5
Using H3 for Handsfree Operations .................................................................................. 6
Specifications ...................................................................................................................... 7
3
Introduction
Thank you for purchasing our Bluetooth Headset H3.
The Bluetooth Headset H3 is a high-tech wireless
headset for handsfree operations at its best. It can be
connected to any Bluetooth device that supports
Headset or Handsfree profile. With soft finger-like grip
mechanism that holds the headset firm against the ear
wall, the H3 is convenient to wear and stays
comfortable even when used for long hours. With its
light and elegantly designed architecture, you can now
walk the streets with confidence while enjoying
handsfree.
Safety Instructions
z Check the laws and regulations on the use of
mobile phones and handsfree equipments in areas
you intend to use.
z Long usage of headset at high volume may cause
hearing defects.
z When cleaning the device, do not use any type of
abrasive pad, scouring powder or solvents as
these may render the finish dull permanently.
z Charge the battery for at least 2 hours before using.
z Do not use in places like hospitals, airplanes etc.
where use of electronic devices is prohibited.
z Do not expose components to extremes of sunlight,
temperature, moisture or vibrations.
z Keep headset and charger cradle away from reach
of children.
z Do not place metal objects such as coin or
necklace on charger cradle contacts as this may
cause short circuit with risk of fire or explosion.
z Risk of explosion if battery is replaced by an
incorrect type. Dispose of used battery according
to the instructions.
Product Features
z Bluetooth V2.1 compliant
z Supports Headset & Handsfree profiles
z Unique finger-like rubber gel that prevents the
headset from falling off
z High performance built-in speaker and microphone
z Red and blue LED indications for Bluetooth
operations, battery and charging
z More than 4 hours of talk time and 200 hours of
standby time
z Simple charging via charger cradle with AC/DC
Adapter
4
What’s Included in the Package
z Bluetooth Headset H3
z Charger Cradle
z AC/DC Charger Adapter
z Rubber Gel (2 sizes)
z Lanyard & Clip
z User Manual
Description of Parts
Charging the H3 Battery
z Before using the headset, charge the battery for at
least 2 hours.
z To charge, first connect the charger cradle with
USB AC/DC charger adapter and then plug the
cord into power supply. Mount headset onto cradle
and push down until the headset gets locked with
red LED on.
z During charging, headset LED will light up red and
when fully charged, it will change to blue.
MFB
(Multi-Function
Button)
VOL UP
(
+
)
VOL DOWN (-)
LED
(2-color)
5
Pairing H3 with Bluetooth Device
z To put H3 in pairing mode, in power off state, click
and hold MFB continuously until LED will changes
to alternating red and blue flash. Pairing mode
lasts for 3 minutes, after this period H3 returns to
standby mode.
z From a Bluetooth device, search for devices and
establish the connection. If prompted for pinkey,
enter ‘0000’ which is the pinkey for H3. When
connected, the LED will turn OFF.
Switching the H3 ON/OFF
z To switch on H3, click and hold MFB until Headset
LED lights up blue and change to periodic flashing
blue.
z To switch off H3, click and hold MFB until Headset
LED lights up red and then turn OFF.
Wearing the H3
z The headset can be worn on left or right ear. Select
any one of the two rubber gels that fit your ear
secure and comfortably.
z Place the headset in the ear such that the rubber
gel holds the headset against the ear wall and
stays comfortably.
z When not using the headset, you can connect the
headset to clip attached to lanyard.
6
Using H3 for Handsfree Operations
Answer Call
z On an incoming call, bell will ring from both phone
and headset. Short click MFB to answer call.
Make Call
z To make a call, first dial from phone and short click
MFB to switch call to headset. Notes: For some
phones, after dialing from phone, call will
automatically be transferred to headset.
Redial
z To redial, double click MFB in idle state.
Notes: For some phones, when MFB is double
clicked, it first displays the numbers last called or
received. In this case, double click MFB again to
redial. Some phones allow direct redialing by
double clicking MFB just once.
Voice Dial
z Make sure your phone supports voice dialing and
that it is activated and voice tags have been
recorded. To voice dial, long click MFB in idle
handsfree mode. Follow the instruction message
from phone to complete voice dialing.
Volume Control
z Short click (+) or (-) to adjust volume during
handsfree mode. Beep tones will be heard at
maximum or minimum volume.
End Call
z To end call first, short click MFB during ‘Talk Mode’.
If other party ends the call first, H3 automatically
returns to handsfree standby mode.
Reject Call
z To reject incoming call, long click MFB.
Call Transfer
z During ‘Talk’ mode, to transfer call from headset to
phone, long click MFB. To transfer call from phone
to headset, short click MFB. You can also use your
phone’s Bluetooth Hotkey to transfer call if such
key is available.
Call Waiting
z To answer second call while in ‘Talk’ mode, short
click MFB. To reject call, long click MFB. To switch
from second call to first call and vice versa, short
click MFB. To end current call, long click MFB.
7
Note : This function can only be used if user has
subscribed for such service.
Microphone Mute
z For privacy reasons, if you don’t want your voice to
be transmitted to the other party, you can mute the
microphone by long clicking (+) and (-) buttons
together during talk mode. To cancel mute function,
long click (+) and (-) buttons together.
Reconnect
z To reconnect headset with phone, short click MFB
twice.
Multi-Connection
z H3 can be connected to 2 devices at the same
time. To establish multi-connection, pair H3 with
the 2 devices one at a time. During multi-
connection, if any of the two devices is in use, the
connection with the other device will automatically
be disconnected and when call is ended,
connection with the disconnected device will be re-
established.
Specifications
Standards Bluetooth Specification V2.1
RF Frequency Range 2402 ~ 2480 MHz
Profiles Supported Headset, Handsfree V1.5
Transmission Power 0.25 ~ 2.5mW (Class 2)
Distance 10m (in open space)
Battery Type Li-Ion Polymer
Battery Life Standby > 200 hrs,
Voice Connection > 4 hrs
Charging Time < 3 hrs
Weight 9.2g
Operating Temp.
& Humidity
-10 ~ +50°C,
Rel. Humidity 0 ~ 95%
Certification BQB, FCC, CE
8
Product Warrant
y
* OpenBrain Technologies warrants this product against all defects in
material and workmanship for a period of one year from the date of
purchase by end user. The conditions for warranty are as follows:
* The warranty is valid only if the original receipt issued to the original
purchaser by the dealer is presented with the product to be repaired
or replaced.
* The warranty is void if the serial number, date of purchase and
product label had been removed.
* The warranty does not cover any failure or damage of the product
due to normal wear and tear, physical abuse, improper installation,
misuse, modification or repairs by unauthorized third parties.
* OpenBrain Technologies does not assume responsibility for any loss
or damage incurred during shipment and as a result of force majeure.
* OpenBrain Technologies is not liable for any incidental or
consequential damages arising from the use or misuse of the product.
* All warranty claims are limited to repair or replacement of the
defective product at the sole discretion of OpenBrain Technologies.
* If OpenBrain Technologies repairs or replaces the product, the
repaired or replaced product shall be warranted for the remaining
time of the original warranty period. Repair or replacement may
involve the use of functionally equivalent reconditioned units.
Replaced part or product becomes the property of OpenBrain
Technologies.
* Consumable components, such as batteries, are not included in the
warranty obligation.
Disclaimer Notice
The manufacturer shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing,
performance or use of this material. This document contains proprietary
information, which is protected by international patent applications and
copyright. All rights reserved. No part of this document may be copied,
reproduced or translated without prior written consent of the
manufacturer. The manufacturer reserves the right to revise this
publication and to make changes from time to time in the contents
hereof without obligation to notify any person of such revisions or
changes. The manufacturer also reserves the right to change the
specifications without notice.
Eu
r
opean CE notice to users and product statements
This product is CE marked according to the provisions of the R & TTE
Directive (99/5/EC). Hereby, Openbrain Technologies Co., Ltd, declares
that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. For further information,
please contact http://www.openbrain.co.kr
WEEE Directive 2002/96/EC Art. 11(2)
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you purchased the product.
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions; (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. CAUTION: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.