OPTOELECTRONICS OPN2002 Data Collector User Manual Users manual
OPTOELECTRONICS Co., Ltd. Data Collector Users manual
Users manual
Master Specifications Laser Data Collector Product Name OPN-2002 Publication No. Edition Initial Release Date of Publication 26 June, 2008 Original Specification No. SS07114 Optoelectronics Co., Ltd. 4-12-17 Tsukagoshi, Warabi-shi, Saitama, 335-0002 Japan TEL: 81+(0)48-446-1183 FAX: 81+(0)48-434-2820 OPN-2002 SS07114 Revision History Specification No.: SS07114 Product Name: OPN-2002 Revision Initial Release Date Section Description of Changes (Initial Release) OPN-2002 SS07114 Table of Contents 1. Abstract........................................................................................................................4 2. Overview......................................................................................................................4 3. Basic Specifications .....................................................................................................5 4. Views of a device.........................................................................................................7 5. Optical Specifications ..................................................................................................8 6. Technical Specifications...............................................................................................9 7. Application Development Environment ......................................................................12 8. USB Interface Specifications .....................................................................................13 9. Wireless Connection..................................................................................................13 10. Serial Number..........................................................................................................14 11. Packaging Specifications .........................................................................................15 12. Durability..................................................................................................................16 13. Warranty ..................................................................................................................18 14. Regulatory Compliance ...........................................................................................19 15. Reduction of Environmental Loads ..........................................................................20 16. Precautions..............................................................................................................21 Appendix 1: Mechanical Drawing ..................................................................................23 OPN-2002 SS07114 1. Abstract This document provides specifications on the OPN-2002 compact data collector equipped with Bluetooth. 2. Overview ・The OPN-2002 is a simplified handheld data collector. ・The decoded text barcode images are output using USB, Bluetooth interfaces or a dedicated cradle to hosts. ・Implemented Bluetooth SPP and HID profiles ・3.7V 240mAh lithium polymer battery is used as a power source of the OPN-2002. ・The OPN-2002 is rechargeable with a dedicated cradle. ・The OPN-2002 is a RoHS compliant product. OPN-2002 SS07114 3. Basic Specifications ITEMS SPECIFICATIONS Control Section MPU 32bit ST MicroSTR710FZx Clock 48MHz Mem ory FROM 1Mbyte SRAM 1Mbyte OS μITRON Input Part key input LED Indicate Double color LED (RED/GREEN) :2, NOTES 2keys:Torrigar key/ Function key Single color LED (Blue) :1 Buzzer 3 volumes (adjustable) Wires communication frequency 2402MHz-2480MHz Specifications Bluetooth Ver1.2 Communication Range 10m Transmission Power Class2 Profile SPP, HID It may differ depending on the environmental conditions. USB Ver1.1 RTS Year, Month, Day, Hour, Minute, Second (lunar equation ±90 seconds) Virtual COM Port serial port 2 ports to a cradle power source main battery lithium polymar 240mAh battery hour more than 7 hours 2 scans per 10 seconds at a ambient temperarure, Bluetooth always transmitted OPN-2002 SS07114 ITEMS SPECIFICATIONS Bi-directional Light Emitting Element Red laser diode Light Output ≤ 1.0 mW Supported Symbologies JAN,EAN,UPC-A,UPC-E,NW-7(Codabar), Industrial 2 of 5,Interleaved 2 of 5, Code 11,Code 39,Code 93,Code 128, MSI/Plessey,UK/Plessey,IATA,Telepen, Matrix 2 of 5,S Code,Tri-Optic, Chinese Post Matrix 2 of 5,EAN 128, RSS-14,RSS Limited,RSS Expanded, PDF417,MicroPDF417 Optical Section Scan Method Dimensions 62.0(D) × 32.0(W) × 17.0(H) (mm) Weight 30g Environmental Spec. Operating Temperature Storage Drop Protective Structure Regulations and Safety Laser Safety EMI Product Safety Other Certifications Logo Certifications Development Environment NOTES 100 ±20 scan/sec Wavelength: 650±10nm (at 25 deg. C) Laser Class 2 Product 0 to 50 degrees C no ice or condensation 20%RH~85%RH -20 to 60 degrees C no ice or condensation 20%RH~85%RH Dropped from a height of 120 cm onto a concrete surface. The drop test was done 18 times. IP42 JIS C 6802:2005 Class 2 IEC 60825-1+A2:2001 Class 2 VCCI Class B, EN55022 Class 2, FCC Part 15 Subpart C IEC/EN 60950-1 CE Marking Certifications for Construction Design of Specified Radio Equipment Bluetooth Logo Certification Development language:C Application Development OPN-2002 SS07114 4. Views of a device ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Reading window USB connector cap Trigger key Function key LED Buzzer Eyelet Connector The laser beam emits from here to scan the barcode. A cap for a USB connector. Press the key to scan barcodes A function key configurable by the application. Indicate the status of barcode reading, Bluetooth connection or warning. Buzzer Fix a wrist strap here. A connector for recharging and data transmission to a dedicated cradle. OPN-2002 SS07114 5. Optical Specifications Parameter Feature Unit Red laser diode Wavelength 650 ±10 (at 25 deg. C) nm Light Output Less than 1.0 mW Scan Method Bi-directional Scan 100 ±20 Scan/sec 54±5 Deg. 44 (Min.) Deg Light Emitting Element Scan Rate Scan Angle Scan Angle Effective Scan Angle 5-2. Laser Scanning Standards 5-2-1. Laser Scanning Tilt Laser scanning tilt is the vertical difference between both ends of a laser scan line. Measure it in the middle of the laser scan line. ▪ Up to 1.2 degrees angle in vertical direction from the scan origin (mirror motor). ▪ Up to 3.1mm at 150mm from the scan origin. (Measured at 0 degree of Skew Angle.) 5-2-2. Scanning Curvature The maximum difference between the laser scan line and the line between both ends of the laser scan line. Measure it in the middle of the laser scan line. ▪ Up to 1.27 degrees angle in vertical direction from the scan origin (mirror motor). ▪ Up to 3.3mm at 150mm from the scan origin. OPN-2002 SS07114 6. Technical Specifications Except as otherwise noted in each section, conditions for technical specifications are as follows:Ambient Temperature and Humidity: Room Temperature and Humidity Ambient Light: 500 - 900 lx Background: Black Scanning Tests: Performance is approved when scanning is successful in all 10 tests. Scanning is deemed successful when completed in 0.5 second or less. 6-1. Print Contrast Signal (PCS) 0.45 or higher (when the reflectivity of space and the quiet zone is higher than 70%) 6-2. Depth of Field and Resolution The depth of the field is measured from the front edge of the data collector. The scan area is a circular area centered around the beam, which appears at various resolutions. Figure : Depth of Field and Resolution 65~90 55~110 55~200 55~350 Resolution OPN-2002 SS07114 Resolution 1.0 mm 0.5 mm 0.25 mm 0.15 mm 0.127 mm DOF (mm) 75 to 500 55 to 350 55 to 200 55 to 110 65 to 90 Symbology Code 39 Code 39 Code 39 Code 39 Code 39 Conditions PCS Quiet Zone 0.9 25 mm 0.9 18 mm 0.9 10 mm 0.9 7 mm 0.9 5 mm No. of Digits 10 Barcode Sample: Optoelectronics Test Sample (N/W Ratio = 1:2.5) Angle: α = 0°, β = 15°, γ = 0° Curvature: R = ∞ 6-3. Pitch, Skew and Tilt Pitch Angle Skew Angle Dead Zone (DZ) Tilt Angle α=±35° β=±50°(Except Dead Zone) β=± 8 °(Scanning may fail in the dead zone as a result of specular reflection) γ=±20° Barcode sample: Optoelectronics Test Sample [Pitch angle, Skew angle and Dead zone] PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code-39, Quiet zone = 10 mm, N/W ratio = 1:2.5 [Tilt angle] PCS = 0.9, Resolution = 0.26 mm, Symbology = 13-digit JAN, Quiet zone = 10 mm Distance: 100 mm from the front edge of the data collector Angles: [Pitch angle] Skew angle: β = +15°, Tilt angle: γ = 0° [Tilt angle] Pitch angle: α = 0°, Skew angle: β = +15° [Skew angle, Dead zone] Pitch angle: α = 0°, Tilt angle: γ = 0° 10 OPN-2002 SS07114 6-4. Curvature With 8-digit JAN, scanning performance is guaranteed when R ≥15 mm. With 13-digit JAN, scanning performance is guaranteed when R ≥ 20 mm. Barcode sample: Optoelectronics Test Sample PCS = 0.9, Resolution = 0.26 mm, Quiet zone = 10 mm Distance: 100 mm from the front edge of the data collector Skew angle: β = + 15° 6-5. Ambient Light Immunity Scanning performance is guaranteed when the illuminance on the barcode surface is between zero and the following values: Incandescent Fluorescent Sunlight 4000 lx 4000 lx 80000 lx Barcode sample: Optoelectronics test sample PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code-39, Quiet zone = 10 mm, N/W ratio = 1:2.5 Distance: 100 mm from the front edge of the data collector Angle: α = 0°, β = 15°, γ = 0° Curvature: R = ∞ Performance is guaranteed unless direct light or direct reflection from a light source falls on the area within which the OPN-2002 detects light. 11 OPN-2002 SS07114 7. Application Development Environment This is an environment for developing a business oriented application. (Option) Application development language is C. 【Development Environment】 A guide for application development Application Development Environment Library specification Compiler(※) ※IAR Embedded Workbench for ARM(EWARM) Ver.5.11 12 OPN-2002 SS07114 8. USB Interface Specifications The OPN-2002 USB model uses Full Speed USB interface. 8-1. USB Connector Contact Number Signal Name VCC -DATA +DATA NC GND Figure : MINI USB B Connector 9. Wireless Connection The wireless interface used by the OPN-2002 complies with Bluetooth Ver. 1.2. SPP (Serial Port Profile) amd HID (Human Interface Device) is supported to enable OPN-2002 to communicate with other Bluetooth devices equipped with the same profile. ・Supported Profile SPP (Serial Port Profile) HID (Human Interface Device) ・Communication Configuration Support N(1 to 7) Piconet (s). After connecting to the piconet, it shifts from master to slave. ・Operation Mode in Connection Master: OPN-2002 Slave: other Bluetooth devices ・Low Power Mode Sniff mode ・Security and Encryption Security and encryption settings are available. 13 OPN-2002 SS07114 10. Serial Number The serial number is stated on a serial label shown below. Figure: Serial Number 14 OPN-2002 SS07114 11. Packaging Specifications 11-1. Single Packaging Specifications Put the OPN-2002 data collector in protective foamed bag and put it in the individual packaging box. Dimensions of protective foamed bag: (W) 60mm x (D) 135mm 11-2. Collective Packaging Specifications Put 100 individually packaged OPN-2002 in a collective packaging box. (1 tray can hold 10pcs of the OPN-2002) Dimensions (Assembled State): (W) 470 mm x (D) 350 mm x (H) 335 mm (inside dimensions) Note: The ‘Ro’ mark on the inner and outer packaging indicates that this product does not use any materials, components or parts that are restricted under RoHS standards (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC). This is an internal determination by Optoelectronics and carries no legal weight in the EU. 15 OPN-2002 SS07114 12. Durability 12-1. Ambient Light Immunity Scanning performance is guaranteed when the illuminance on the barcode surface is between zero and the following values: Incandescent: 3,000 lx Fluorescent: 3,000 lx Sunlight: 50,000 lx Barcode sample: Optoelectronics test sample PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code-39, Quiet zone = 10 mm, N/W ratio = 1:2.5 Distance: 100 mm from the front edge of the data collector Angle: α = 0°, β = 15°, γ = 0° Curvature: R = ∞ Power supply voltage: 3.7V Performance is guaranteed unless direct light or direct reflection from a light source falls on the area within which the OPN-2002 detects light. 12-2. Dust and Water Proof IP42 12-3. Vibration Test (Without Packaging) There was no sign of malfunction with the data collector’s exterior appearance or its operation after the following vibration test: In the non-operating state, increased the frequency of the vibration from 10 Hz to 100 Hz with accelerated velocity 2.0 G (19.6 m/s2) for over 30 minutes (60 minutes for one cycle). Repeat this routine for X, Y and Z direction, respectively. 12-4. Vibration Test (With Collective Packaging) There was no sign of malfunction with the data collector’s exterior appearance or its operation after the following vibration test: With the collective packaging, increased the frequency of the vibration from 10 Hz to 100 Hz with accelerated velocity 2.0 G (19.6 m/s2) for over 30 minutes (60 minutes for one cycle). Repeat this routine for X, Y and Z direction, respectively. 16 OPN-2002 SS07114 12-5. Product Drop Test (Without Packaging) No malfunction should occur after the following drop test. As shown below, drop the data collector from 120cm above the concrete floor. (three times from each of its 6 sides) 12-6. Collective Package Drop Test No malfunction should occur after the following drop test. Drop the collective package box from 70cm above the concrete floor once its one corner, three edges and six sides. 12-7. Static Electricity Air discharge: 8kV max (No malfunction) 15kV max (No destruction) Contact discharge: 4kV max (No malfunction) (Discharge point: Screws which fix cases) 10kV max (No destruction) Measurement environment: Use electrostatic testing device compliant with IEC61000-4-2 Discharge resistance: 330Ω Capacitor charging: 150pF 12-8. Reliability MTBF: 10,000 hours 17 OPN-2002 SS07114 13. Warranty 13-1. Warranty period OPTOELECTRONICS Co., Ltd. warrants that this product is free of defects or malfunctions for a period of twelve (12) months from its shipment. In case of having defects or malfunctions caused by normal usage in accordance with this specification during the foregoing warranty period, OPTOELECTRONICS shall repair or adjust the product free of charge. Any repair or replacement of the product after the foregoing warranty period shall be charged at regular repair rates. If defects or malfunctions were caused by customer mishandling, product repairs or replacement will be charged at regular repair rates, even during the foregoing warranty period. 13-2. Delivery Products for maintenance or repair shall be sent back to OPTOELECTRONICS. The sender is responsible for all shipping costs. 13-3. Repair Timeframe Repaired products shall be shipped back to the customer within 20 days after acceptance by OPTOELECTRONICS. Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the customer. 13-4. Maintenance Period The maintenance period of this product is 5 years after its shipment. OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance period if a satisfactory replacement product or maintenance solution is agreed to. 13-5. Other Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case basis. 18 OPN-2002 SS07114 14. Regulatory Compliance 14-1. Laser Safety JIS C 6802:2005 Class 2 IEC60825-1+A2:2001 Class 2 CDRH Class II 14-2. Product Safety IEC60950 EN60950 14-3. EMC EN55022 EN55024 FCC Part15 Subpart B, and Subpart C Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment. 19 OPN-2002 SS07114 VCCI Class B This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. 14-3. Others Radio Law 38-24-1 Bluetooth Logo certified 15. Reduction of Environmental Loads The OPN-2002 is a RoHS compliant product. RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC. 20 OPN-2002 SS07114 16. Precautions 16-1. Laser-related Caution Please do not look directly at the laser. Please do not point the laser at others’ eyes. Pease do not look directly at the beam of optical instruments. These things have the potential to damage your eyes. 16-2. Handling Handle this product carefully. Do not subject it to any of the following: (1)Shock Do not drop this device from a height greater than specified in this manual. Do not swing around the cable. Do not put heavy items on the cable. (2)Temperature Conditions Do not use the device at temperatures outside the specified range. Do not pour boiling water on the device. Do not expose the device to open flame. Do not bend the cable at temperatures lower than the specified range. (3)Foreign Materials Do not put the device in water. Do not expose the device to chemicals. (4)Other Do not plug/unplug the connectors before the power is disconnected. Insert the USB connector correctly. Do not disassemble this product. Do not use the data collector near a radio or a TV receiver. It may cause reception problems. The data collector may be damaged by voltage drops caused by lightning. The data collector may not perform properly in environments when placed near a flickering light, such as a CRT (computer monitor, television, etc.). 21 OPN-2002 SS07114 16-3. Bluetooth • Bluetooth is trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to OPTOELECTRONICS. • OPN-2002 supports Bluetooth wireless communication with other Bluetooth device which has the same profile. • OPN-2002 complies with Bluetooth Ver. 1.2. However, its communication performance with equipments other than cradles or devices stated in this manual is not guaranteed. • The frequency band (2.4 GHz) which is used by Bluetooth devices is also used by miscellaneous other equipments. The baud rate or the communication range of OPN-2002 may be degraded by the negative impacts of those other equipment. • The baud rate or the communication range of OPN-2002 may be degraded by obstacles, radio wave conditions or the state of the device which OPN-2002 is communicating with. • Communication performance of OPN-2002 may be degraded when there is a metal item extremely close to the back of the scanner. 16-4. Frequency Band The frequency band of 2.4 GHz is utilized by this scanner. Read carefully the followings before using this product. In the frequency band of this scanner, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amatuer radio station are managed. • Please make sure that “other radio stations” are not operated in the frequency band of 2.4 GHz before using this scanner. • In case that radio interference occurs between this scanner and “other radio stations,” change the service space immediately, or stop transmitting radiowave to avoid the interference. • If you have any questions or troubles, please contact our marketing group. 22 OPN-2002 SS07114 Appendix 1: Mechanical Drawing Dimensions: 62.0(D) × 32.0(W) × 16.0(H) (mm) 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2008:06:27 16:56:57+09:00 Create Date : 2008:06:27 13:26:39+09:00 Metadata Date : 2008:06:27 16:56:57+09:00 Format : application/pdf Title : Microsoft Word - 修正版OPN-2002の英訳20080627.doc Creator : kharada3089 Document ID : uuid:8c649d21-a0db-4df8-93a4-328417c5e55f Instance ID : uuid:fcc67f59-05e4-4bbe-b6f1-30d9a8f00872 Page Count : 23 Author : kharada3089EXIF Metadata provided by EXIF.tools