OPTOELECTRONICS OPN2002N Laser Data Collector User Manual

OPTOELECTRONICS Co., Ltd. Laser Data Collector

Contents

user manual

      Master Specification Data Collector with Bluetooth Model No.  OPN-2002n Manufacturing Specification No.  XF1OPN2002 DOC_ID SS12xxx Issue No.    Edition  1st Issue Date  2012-8-1      Approved by     Optoelectronics Co., Ltd. 4-12-17 Tsukagoshi Warabi-shi, Saitama 335-0002 Japan TEL +81-48-446-1183 FAX +81-48-446-1184   営業 営業管理 C S  Q A/QC 照査 作成
OPN-2002n                                                     DOC ID:SS12003   Revision History DOC_ID  :SS12003 型   名 :OPN-2002n Edition  Date  Section  Description of Changes 1st 2012-8-1  -  (Initial Issue)
OPN-2002n                                                     DOC ID:SS12003   Index                                   page 1. ABSTRACT ................................................................................................................................. 12. OVERVIEW................................................................................................................................. 13. BASIC SPECIFICATION........................................................................................................... 24. DETAILED VIEW....................................................................................................................... 45. ELECTRICAL SPECIFICATIONS ............................................................................................ 55.1. USB..........................................................................................................................................55.2. Charging Cradle ......................................................................................................................56. INTERFACE ............................................................................................................................... 56.1. USB ..........................................................................................................................................56.1.1. Connector....................................................................................................................................... 56.1.2. USB Interface Circuit...................................................................................................................... 56.2. Bluetooth..................................................................................................................................66.3. Serial Interface ........................................................................................................................66.3.1. Connector....................................................................................................................................... 66.3.2. Serial Interface Circuit.................................................................................................................... 67. OPTICAL SPECIFICATIONS.................................................................................................... 77.1. Laser Scanning Specification..................................................................................................77.2. Laser Scanning Specification..................................................................................................77.2.1. Laser Scanning Tilt......................................................................................................................... 77.2.2. Scanning Curvature ....................................................................................................................... 78. TECHNICAL SPECIFICATIONS.............................................................................................. 78.1. Print Contrast Signal ..............................................................................................................88.2.  Depth of Field and Resolution ................................................................................................88.3. Pitch, Skew, and Tilt ...............................................................................................................98.4. Curvature............................................................................................................................... 119. ENVIRONMENTAL SPECIFICATIONS ................................................................................ 129.1. Temperature ..........................................................................................................................129.2. Humidity................................................................................................................................129.3. Ambient Light Immunity ......................................................................................................129.4. Dust and Drip Proof ..............................................................................................................129.5. Vibration Strength(without packing) ...................................................................................139.6.  Vibration Strength (in individual packing) .......................................................................... 13Drop Impact Strength.........................................................................................................................139.7. Drop Impact Strength ...........................................................................................................139.8. Electrical Specifications ........................................................................................................1310. REGULATORY COMPLIANCE............................................................................................... 1410.1. Laser Safety...........................................................................................................................1410.2. Product Safety .......................................................................................................................1410.3. EMC .......................................................................................................................................1410.4. Other ......................................................................................................................................1511. ROHS......................................................................................................................................... 1512. MTBF ........................................................................................................................................ 1513. PRECAUTIONS........................................................................................................................ 1513.1. Precaution against Laser Light ............................................................................................15
OPN-2002n                                                     DOC ID:SS12003   13.2. Handling ................................................................................................................................ 1513.3. Radio Low ..............................................................................................................................1613.4. Export Administration Regulations...................................................................................... 1613.5. Bluetooth................................................................................................................................1613.6. Frequency Band.....................................................................................................................1614. PRODUCT LABEL ...................................................................................................................1815. PACKAGING SPECIFICATIONS ........................................................................................... 1915.1. Individual Packaging Specification ......................................................................................1915.2. Collective Packaging Specification .......................................................................................2016. WARRANTY.............................................................................................................................. 2116.1. Warranty period.....................................................................................................................2116.2. Delivery..................................................................................................................................2116.3. Repair Timeframe..................................................................................................................2116.4. Maintenance Period............................................................................................................... 2116.5. Other ......................................................................................................................................2117. PHYSICAL FEATURES........................................................................................................... 2117.1. Dimensions ............................................................................................................................2117.2. Weight ....................................................................................................................................2117.3. Mechanical Drawing..............................................................................................................2218. SUPPORTED SYMBOLOGIES ............................................................................................... 2318.1. 1D symbologies ......................................................................................................................23
OPN-2002n                                               DOC ID:SS12xxx 1 1. Abstract  This manual provides specifications for the OPN-2002n Laser Barcode Scanner.  2. Overview The OPN-2002n scanner enables data transmission of barcode using Bluetooth wireless thechnology.   z  The OPN-2002n is handy and simple data collector.   Data transmission is performed via a USB or Bluetooth.   z  The OPN-2002n has SPP and HID profiles. z  Power supply is 3.7V, 230mAh(typ.) and Lithium-ion polymer battery is used. z  The power supply charging is done via a USB interface or charging cradle.
OPN-2002n                                               DOC ID:SS12xxx 2 3. Basic Specification Item  Spedification  Note CPU 32bit CISC/96MHz   FROM  512Kbyte + 32KByte   SRAM 96Kbyte   Control Section FROM(ストレージ)  1Mbyte  For user data Input Section Key type  2 keys: Trigger, Function   LED  bi-colors(red and green) 2pcs, a blue LED   Display sectionBeeper  Tone:variable frequency, Volume:3-level variable    Contents  year, month, day, hour, minute and second     RTC Error  ≤±90seconds per a month   Frequency  2402MHz  ~ 2480MHz   Specification Bluetooth Ver2.1   Communication distance  10m It may shorter depending on usage environments Output level  Class 2  4dBm max. Bluetooth Profile SPP/HID   USB  ・Full-Speed 12Mbps ( HID/COM ) ・Hi-Power Bus-powered  対応  I /F Serial interface  2contacts for cradle.   Light emitting device  Red laser diode     Wave length / output power  650±10nm ≤1mW  at 25 deg. C Optical SectionScan rate  100±20scan/sec   Supported Symbologies JAN,EAN,UPC-A,UPC-E,NW-7 (Codabar), Industrial 2 of 5,Interleaved 2 of 5, Code 11,Code 39,Code 93,Code 128 等 Refer to Chapter18 for detailsMinimum Resolution  Code 39    : 0.127mm  PCS 0.9 Curvature  Radius ≥ 15mm    ( 8-digiet JAN) Radius ≥ 20mm    ( 13-digit JAN)  PCS 0.9 Pitch:α≤ ±35° Skew:β≤ ±50°(Excluding dead zone) Scan Angle Tilt:γ≤ ±20° PCS 0.9 Resolution:0.127  60~100  Resolution:0.15  40~130 Resolution:0.25  40~220 Resolution:0.5  40~360 DOF(mm) Code 39 Resolution:1.0  50~570 PCS 0.9 1D Symbologies Minimum PCS  0.45    With over 70% reflectivity of space and quiet zone.
OPN-2002n                                               DOC ID:SS12xxx 3  Item  Specification  Note Main Battery  Lithium-ion polymer battery 230mAh(typ.)   Up-time  10hours or more  When a barcode is scanned twice in 10 sec. at 25 deg. CRange of Operation(Charging) Voltage 4.5  ~ 5.5 V   Power Current consumption     Charging <500mA   Operating   0  ~ 50 ℃  Temperature  Storage  -20  ~ 60 ℃  Operating  20%RH  ~ 85%RH  No frost, no condensation. Humidity  Storage  20%RH  ~ 85%RH  No frost, no condensation. Fluorenscent  4,000 lx or less Ambient Light Immunity  Sunlight: 80,000 lx or less  Vibration Increase the frequency of vibration from 10 Hz to 100 Hz at an accelerated velocity of    19.6 m/s2 (2G) for 6 minutes each in X, Y and Z-direction. Repeated this test for 10 times.  Drop Drop 3 times, at each 6 faces (right, left, front, back and top), from a height of 120 cm onto a concrete surface.  Environmental Specification Dust and drip proof  IP42      Item  Specification  Note Laser safety JIS C 6802:2011 Class2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class  Ⅱ  Safety standards  EN60950-1:2005 IEC60950-1:2006   EMC EN55022 EN55024 FCC Part 15 Subpart C , Subpart B ClassB VCCI ClassB For residential, commercial and light-industrial environments Product safety  CE Marking   Regulatory Other  Bluetooth logo certification   No destruction  10kV (Air) Immunity test ESD immunity No malfunction 8kV (Air) Condition: IEC61000-4-6 compliant Dimensions  62.0(D)  × 32.0(W) × 17.0(H) (mm)   Physical Features Weight  Approx. 28g  Excluding the accessories
OPN-2002n                                               DOC ID:SS12xxx 4 4. Detailed View   Figure 1:Detailed View  No.  Name  Description 1  Scanning Window Laser light is emitted through this window to read bar codes.   2 Scanning Window The laser light is emitted through this window.   3 Trigger Key A trigger key used to read bar codes 4  Function Key  A function key that can be configured with application 5 LED Indicator of operating status, such as bar code reading and warnings 6  Buzzer Hole  Sound from a built-in buzzer comes out through these holes.   7  Strap Hole  A hole to attach a hand strap 8  Contact  The contact is for charge and communication.
OPN-2002n                                               DOC ID:SS12xxx 5 5. Electrical Specifications  5.1. USB ・Voltage       : 4.5-5.5V ・Bus-Power Class    : Hi-Power ( 500mA max ) ・Current consumption  : <500mA  5.2. Charging Cradle ・Voltage       : 4.5-5.5V  6. Interface The OPN-2002n supports USB, Bluetooth and serial interfaces.  6.1. USB This interface supported FULL Speed USB.  6.1.1. Connector  Signal  Pin No. VCC 1 Data(-) 2 Data(+)  3 ( NC )  4 GND 5 Figure 2 : MINI USB B Connector   6.1.2.  USB Interface Circuit                        Figure 3:USBInterface Circuit     3214Microcontroller  Data(+) Data(-) VCC GND USB connector +5.0V Power......    15......   5
OPN-2002n                                               DOC ID:SS12xxx 6 6.2. Bluetooth The OPN-2002n supported Bluetooth. Frequency  : 2402MHz  ~ 2480MHz Specification  : Bluetooth Ver2.1 Communication distance  : 10m Output level  : Class 2 (4dBm Max.) Supported profiles  : SPP/HID Topology of connection  : Point-to-point Operating mode  : Master or Slave mode Security mode  : Enabled Encryption : Enabled   6.3. Serial Interface 6.3.1. Connector  Signal  Pin No. VCC 1 RXD 2 TXD 3 GND 4  Figure 4 : Serial Interface Connector  6.3.2. Serial Interface Circuit                      Figure 5: Serial Interface Cirtuit  3214Microcontroller  TXD RXD VCC GND USB connector +5.0V Power1    2    3    4
OPN-2002n                                               DOC ID:SS12xxx 7 7. Optical Specifications 7.1. Laser Scanning Specification Item  Specification  Unit Light-emitting device  Red laser diode   Emission Wave length  650±10 (25 deg.C)  nm Output power  <1.0  mW Scan Method  Bi-directional   Scan Rate  100±20  Scan/Sec Scan Angle  54±5  Deg Scan Angle  Effective Scan Angle  44 (min.)  Deg  7.2. Laser Scanning Specification   7.2.1. Laser Scanning Tilt   Laser scanning tilt is the vertical difference between both ends of a laser scan line. Measure it in the middle of the laser scan line. •  Up to 1.2 degrees angle in vertical direction from the scan origin (mirror motor). •  Up to 3.1 mm at 150 mm from the scan origin.  7.2.2. Scanning Curvature The maximum difference between the laser scan line and the line between both ends of the laser scan line. Measure it in the middle of the laser scan line. •  Up to 1.27 degrees angle in vertical direction from the scan origin (mirror motor). •  Up to 3.3 mm at 150 mm from the scan origin.   Horizontal LineCurvatureTilt Figure 6 : Laser Scanning Tilt and Curvature  8. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section  <Conditions> Ambient Temperature and Humidity  Room temperature, room humidity Ambient Light  500 ~ 900 lx (excluding high-frequency lighting) Background Black Reading Test  Accept the performance with 10 consecutive successes in reading. Each reading should be done in 0.5 seconds or less.
OPN-2002n                                               DOC ID:SS12xxx 8 8.1. Print Contrast Signal PSC 0.45 or higher (70% or higher reflectivity of space and quiet zone)  PCS =  Reflectance of white bar-Reflectance of black bar Reflectance of white bar    * Be sure to keep the optical window clean without dirt or scratches, or it may have a bad effect on the reading characteristics.  8.2. Depth of Field and Resolution Distance in this drawing is measured from the front edge of the scanner.  Figure 7: Depth of Field  Resolution  Depth of Field(mm)  Symbology  PCS  Quiet Zone  Digits 1.0mm  60  ~ 570  Code 39  0.9  25mm  1桁 0.5mm  40  ~ 360  Code 39  0.9  18mm  3桁 0.25mm  40  ~ 220  Code 39  0.9  10mm  8桁 0.15mm  40  ~ 130  Code 39  0.9    7mm  10 桁 0.127mm  50  ~ 100  Code 39  0.9    5mm  4桁  <Conditions> Bar Code Sample : Optoelectronics Test Chart, N/W ratio = 1:2.5 Angle     : α = 0° β = 15° γ = 0° Curvature    : R = ∞
OPN-2002n                                               DOC ID:SS12xxx 9 8.3. Pitch, Skew, and Tilt   Pitch   : α ≦ ±30° Skew   : β ≦ ±50° (Excluding dead zone) Dead Zone  : β ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection)   Tilt   : γ ≦ ±20°  <Conditions> Bar Code Sample  Optoelectronics Test Sample   <Pitch, Skew and Dead Zone>   PCS 0.9, Resolution 0.25 mm, 9-digit Code 39,   Quiet Zone 10 mm, N/W Ratio = 1 : 2.5  <Tilt> PCS 0.9, Resolution 0.26 mm, JAN-13, Quiet Zone 10 mm Distance  100 mm from the edge of the scan engine Angle  Pitch angle : β = +15°, γ = 0° Tilt angle    : α = 0°, β = +15° Skew angle / Dead zone:    α = 0°, γ = 0° Curvature R = ∞
OPN-2002n                                               DOC ID:SS12xxx 10  Figure 8: Pitch Angle     Figure 9: Skew Angle     Figure 10: Tilt Angle
OPN-2002n                                               DOC ID:SS12xxx 11 8.4. Curvature 8-digit JAN  : R ≧ 15 mm  13-digit JAN  : R ≧ 20 mm    <Conditions>  Bar Code Sample  Optoelectronics Test Sample   PCS 0.9, Resolution 0.26 mm, JAN-13, Quiet Zone 10 mm Distance  100 mm from the edge of the scan engine Angle Skew angle β = +15° Curvature R = ∞  Figure 11 : Curvature
OPN-2002n                                               DOC ID:SS12xxx 12 9. Environmental Specifications  9.1. Temperature Operating : 0  ~ 50 ℃      Strage : -20 ~ 60 ℃  9.2. Humidity Operating : 20 ~ 85%RH(no condensation, no frost) Strage : 20 ~ 85%RH(no condensation, no frost)   9.3. Ambient Light Immunity   Scanning performance is guaranteed when the range of illumination on a barcode surface is the following values.  Incandescent light  : 0 ~ 4,000 lx Fluorescent light  : 0 ~ 4,000 lx Sunlight      : 0 ~ 80,000 lx  <Conditions> Barcode Test Sample  OPTOELECTRONICS test chart   Resolution 0.254 mm PDF417 specified in Chapter 7   Distance  89 mm from the front edge of the scanner. Angles Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° Curvature R = ∞ Power Voltage    3.7 V  * Be sure that the direct light or specular reflection from the light source does not enter the light receiving section of the OPN-2002n.    9.4. Dust and Drip Proof   IEC IP42 equivalent  Protection against solid objects: Level 4 Protected against solid objects greater than 1.0 mm  Protection against liquids: Level 2 (JIS IPX2) Protected against dripping water from the vertical when tilted up to 15°
OPN-2002n                                               DOC ID:SS12xxx 13 9.5. Vibration Strength(without packing)   There shall be no sign of malfunction after the following vibration test.  Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the non-operating state. Repeat this in each X, Y and Z direction.    9.6. Vibration Strength (in individual packing)   There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in individually packaged state. Repeat this in each X, Y and Z direction.    Drop Impact Strength There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner three times (18 times in total), at each 6 face, from a height of 120cm onto a concrete floor as shown below.   120cmコンクリート Figure 12: Drop test    9.7. Drop Impact Strength (in individual packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces, from a height of 150 cm onto a concrete floor.  9.8. Electrical Specifications Air discharge  ±8 kV max. (No malfunction) ±10 kV max. (No destruction) Measurement environment  An electrostatic testing device compliant with IEC 61000-4-2 is used. Discharge resistance  330 Ω Charging capacitor  150 pF
OPN-2002n                                               DOC ID:SS12xxx 14 10. Regulatory Compliance 10.1. Laser Safety JIS C 6802:2011 Class 2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class  Ⅱ  10.2. Product Safety EN60950-1:2005 IEC60950-1:2006  10.3. EMC EN55022 EN55024 FCC Part 15 Subpart C , Subpart B ClassB                                        Federal Communications Commission Notices  This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and   (2) this device must accept any interference received, including interference that may cause undesired operation.   Harmful Interference Notice   This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   •   Reorient or relocate the receiving antenna   •   Increase the separation between the equipment or devices   •   Connect the equipment to an outlet other than the receiver's  •   Consult a dealer or an experienced radio/TV technician for assistance   Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment.   RF Exposure The OPN-2002n unit (FCC ID: UFOOPN2002N) complies with FCC radiation exposure limits set forth for uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines  in Supplement  C  to  OET65.  The unit  has  very  low level  of  RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).The equipment must not be co-located or operating in conjuncion with any other                                 antenna or transmitter
OPN-2002n                                               DOC ID:SS12xxx 15 VCCI Class B          10.4. Other Bluetooth logo certification MFi License Program The OPN-2002n uses Bluetooth module which qualifies as radio equipment for low-power radio stations as specified in the Radio Law 38-24-1.        11. RoHS The OPN-2002n is compliant with RoHS. RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC  12. MTBF MTBF (Mean Time Between Failures)   10,000 hours    13. Precautions 13.1.  Precaution against Laser Light   *Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.           Caution - Do not stare into the laser light from a scanning window. It may harm your eyes. Do not point the laser directly at others’ eyes. It may harm your eyes. Do not stare into the beam with optical instruments. It may harm your eyes.  13.2. Handling Handle this product carefully. Do not deliberately subject it to any of the following: (1) Shock: •   Do not drop this product from a height greater than specified in this manual. •   Do not place this product under or between any heavy items. •   Do not swing this product around holding the hand strap.  (2) Temperature Conditions: •   Do not use this product at temperatures outside the specified range. •   Do not pour boiling water on this product. •   Do not throw this product into a fire.  (3) Foreign Materials: This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.   Specified Radio Equipment: Low power data communications system in the 2.4GHz band in Article 2 paragraph 1 item (19), Ordinance of MPT.  Model type of Bluetooth module:OPA-26X1 Number of certification: 201-125603
OPN-2002n                                               DOC ID:SS12xxx 16 •   Do not immerse this product in water or other liquid. •   Do not expose this product to chemicals. (4) Others •   Do not disassemble this product.   •   Do not use this product near a radio or a TV. It may cause reception problems. •   This product may be affected by a momentary voltage drop caused by lightning. • This product may not perform properly in a place where it will be subjected to a flickering light, such as a CRT (computer monitor, television, etc.).  13.3. Radio Low The OPN-2002n uses Bluetooth module which qualifies as radio equipment for low-power radio stations (2.4 GHz band advanced data communication systems) as specified in the Radio Law 38-24-1. Therefore it does not need to have a radio station license in Japan. The following activities are prohibited under the Radio Law: ・  Remodeling and disassembly ・  Peeling off the certificate label  Do NOT use the scanner under the following environment, as radio interference may affect other device and end up with causing physical or material damage. ・  Safety apparatus and medical device for human body protection ・  Environment where is concerned to cause serious damage  13.4. Export Administration Regulations  This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government.  13.5. Bluetooth To communicate via Bluetooth, the device which OPN-2002n is connected to must support the same Bluetooth version and profile as OPN-2002n’s.   ・ OPN-2002n is compliant to Bluetooth standards. However, we cannot assure the connection between OPN-2002n and other Bluetooth devices which have not been tested. ・  Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also utilize this frequency band. It may have an effect on the communication speed or communication range of this data collector. ・  The use of OPN-2002n outside of the European Union, the United States and Canada is punishable under the law. ・  Communication speed and communication range of OPN-2002n may differ due to the obstacles and radio wave conditions between OPN-2002n and the device, which OPN-2002n    is connected to. ・  Conditions of the device, which OPN-2002n is connected to, may also affect the communication speed and communication range of OPN-2002n.  13.6. Frequency Band  The frequency band 2.4 GHz is utilized by this product. Read carefully the followings before using this product.  In the frequency band of this product, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring
OPN-2002n                                               DOC ID:SS12xxx 17 license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed.  1.   Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this product. 2.  In case that radio interference occurs between this product and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. 3.    If you have any questions or troubles, please contact our sales office.  * This specification manual is subject to change without prior notice.
OPN-2002n                                               DOC ID:SS12xxx 18 14. Product Label The labels shown below are attached to the back side of the data collector.   Figure 13: Product & Laser Caution Label
OPN-2002n                                               DOC ID:SS12xxx 19 15. Packaging Specifications 15.1.  Individual Packaging Specification Assembled package size: 125 x 112 x 40 (WDH mm) 【国内向】 個装箱バーコードラベル  (3A0002)MADE IN▲▲▲▲▲Model No.MODEL NEMESpec No.*バーコード**△△△△△△*Serial No. Quantity 1Item No.Ro*XF5OPN2002**-*OPN-2002i-BLKAIR PACKINGOPN10018003-0-01Neck strapOPN10019106-0-02Poly bagNo.3(0.03×80×150)Mini USB cable(ベージュ)G9904B099-002テープで止めるBOXNo.OPN20018001-0-00*折り目にバーコードがかからない事シリアルNo.の表示について『 123456 』123456=製品シリアルNo.6桁のシリアルNo.を表示【原産国表示】~country of origin~中国生産(produced in China)=MADE IN CHINA日本生産(produced in Japan)=MADE IN JAPAN Figure 14: Individual Packaging  n
OPN-2002n                                               DOC ID:SS12xxx 20 15.2.  Collective Packaging Specification Assembled package size: 595 x 520 x 245 (WDH mm), 100 pieces/box ②③④⑤⑥⑦⑧⑨⑩①5段入りCarton Box(5B0008)100台入り①1~5②6~10③11~15④16~20⑤21~25⑥26~30⑦31~35⑧36~40⑨41~45⑩46~50⑫⑪⑬⑭⑮⑯⑰⑱⑲⑳⑪51~55⑫56~60⑬61~65⑭66~70⑮71~75⑯76~80⑰81~85⑱86~90⑲91~95⑳96~100シリアルNo.の順序(3C0006) (3C0007)C/No.△△MADE IN▲▲▲▲▲3*△△△△△△*OPTOELECTRONICS CO.,LTD.Missing Serial Number Missing Q'ty △△456789101112*△△△△△△**△△△△△△**△△△△△△**△△△△△△**△△△△△△**△△△△△△**△△△△△△**△△△△△△**△△△△△△**XF5OPN2002**-*C/No.△△MADE IN▲▲▲▲▲ProductOPN-2002i-BLKPO#*△△△△-△△*Spec#Q'ty*△△*△△/△△S/N(from)*000001*S/N(to)*000▲▲▲*Missing Serial Number Missing Q'ty △1*△△△△△△*2*△△△△△△*ROM-Ver.(Bluetooht)Shipping DateTD01J**20△△/△△/△△OPTOELECTRONICS CO.,LTD.RoItem# バーコードROM-Ver.(MAIN) TC01J** A :【国内向】 外装箱バーコードラベル 正面と背面の2ヶ所に貼付(面の中央付近)   B:【国内向】 Missing Serial Numberラベル     欠品が3つ以上の場合にのみ貼付するAラベルと並べ正面と背面の2ヶ所に貼付(面の中央付近)【原産国表示】~country of origin~中国生産(produced in China)=MADE IN CHINA 日本生産(produced in Japan)=MADE IN JAPAN Figure 15: Collective Packaging n
OPN-2002n                                               DOC ID:SS12xxx 21 16. Warranty 16.1. Warranty period OPTOELECTRONICS Co., Ltd. warrants that this product is free of defects or malfunctions for a period of twelve (12) months from its shipment. In case of having defects or malfunctions caused by normal usage in accordance with this specification during the foregoing warranty period, OPTOELECTRONICS shall repair or adjust the product free of charge. Any repair or replacement of the product after the foregoing warranty period shall be charged at regular repair rates. If defects or malfunctions were caused by customer mishandling, product repairs or replacement will be charged at regular repair rates, even during the foregoing warranty period.    16.2. Delivery Products for maintenance or repair shall be sent back to OPTOELECTRONICS. The sender is responsible for all shipping costs.  16.3. Repair Timeframe Repaired products shall be shipped back to the customer within 20 days after acceptance by OPTOELECTRONICS. Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the customer.  16.4. Maintenance Period The maintenance period of this product is 5 years after its shipment. OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance period if a satisfactory replacement product or maintenance solution is agreed to.  16.5. Other Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case basis. 17. Physical Features  17.1. Dimensions 62.0(D)  × 32.0(W) × 17.0(H) (mm)  17.2. Weight Approx. 28g (Excluding the accessories)
OPN-2002n                                               DOC ID:SS12xxx 22 17.3. Mechanical Drawing  Figure 16:  Mechanical Drawing
OPN-2002n                                               DOC ID:SS12xxx 23 18. Supported Symbologies  18.1. 1D symbologies Symbology  Symbology JAN13 digits  Interleaved 2 of 5 JAN13 digits + ADDON2 digits  Code 93 JAN13 digits + ADDON5 digits  Code 128 JAN8 digits  MSI/Plessey JAN8 digits + ADDON2 digits  IATA JAN8 digits + ADDON5 digits  UK/Plessey EAN13 digits  Telepen EAN13 digits + ADDON2 digits  Matrix 2 of 5 EAN13 digits + ADDON5 digits  ChinesePostMatrix 2 of 5 EAN8 digits  NW-7 ABC Code EAN8 digits + ADDON2 digits  NW-7 CX Code EAN8 digits + ADDON5 digits  S-Code Instore Code 13 digits  Tri/Optic Instore Code 8 digits  Code 39 Full Ascii UPC-A  Code 39 It.Pharmaceutical UPC-A+ADDON2 digits  EAN 128 UPC-A+ADDON5 digits  RSS-14 UPC-E RSS Limited UPC-E+ADDON2 digits  RSS Expanded UPC-E+ADDON5 digits  PDF417 UPC-E1 MicroPDF417 UPC-E1+ADDON2 digits  Code 11 UPC-E1+ADDON5 digits  Korean Post Code 39   NW-7 (Codabar)   Industrial 2 of 5

Navigation menu