OPTOELECTRONICS OPN2002N Laser Data Collector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1832693
Application ID	94v3LbWRI5IeE5syN0HCUA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.11kB (813820 bits)
Date Submitted	2012-11-08 00:00:00
Date Available	2012-11-08 00:00:00
Creation Date	2012-10-10 11:51:20
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-11-07 15:27:10
Document Title	Microsoft Word - SS12003_OPN-2002n_初版_ENG.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	skonno0287

Master Specification
Data Collector with Bluetooth
Model No.
OPN-2002n
Manufacturing
Specification No.
XF1OPN2002
Issue No.
Issue Date
DOC_ID SS12xxx
Edition
1st
2012-8-1
Approved by
Optoelectronics Co., Ltd.
4-12-17 Tsukagoshi Warabi-shi, Saitama
335-0002 Japan
TEL +81-48-446-1183
FAX +81-48-446-1184
営業
営業管理
CS
Q A/QC
照査
作成
OPN-2002n
DOC ID：SS1200
Revision History
DOC_ID
型
：SS12003
名 ：OPN-2002n
Edition
Date
Section
1st
2012-8-1
Description of Changes
（Initial Issue）
OPN-2002n
Index
DOC ID：SS1200
page
1.
ABSTRACT ................................................................................................................................. 1
2.
OVERVIEW................................................................................................................................. 1
3.
BASIC SPECIFICATION ........................................................................................................... 2
4.
DETAILED VIEW....................................................................................................................... 4
5.
ELECTRICAL SPECIFICATIONS ............................................................................................ 5
5.1.
ＵＳＢ.......................................................................................................................................... 5
5.2.
Charging Cradle ...................................................................................................................... 5
6. INTERFACE ............................................................................................................................... 5
6.1.
USB .......................................................................................................................................... 5
6.1.1.
Connector....................................................................................................................................... 5
6.1.2.
USB Interface Circuit...................................................................................................................... 5
6.2.
Bluetooth.................................................................................................................................. 6
6.3.
Serial Interface ........................................................................................................................ 6
6.3.1.
Connector....................................................................................................................................... 6
6.3.2.
Serial Interface Circuit.................................................................................................................... 6
7. OPTICAL SPECIFICATIONS.................................................................................................... 7
7.1.
Laser Scanning Specification..................................................................................................7
7.2.
Laser Scanning Specification..................................................................................................7
7.2.1.
Laser Scanning Tilt......................................................................................................................... 7
7.2.2.
Scanning Curvature ....................................................................................................................... 7
8. TECHNICAL SPECIFICATIONS.............................................................................................. 7
8.1.
Print Contrast Signal .............................................................................................................. 8
8.2.
Depth of Field and Resolution ................................................................................................ 8
8.3.
Pitch, Skew, and Tilt ............................................................................................................... 9
8.4.
Curvature............................................................................................................................... 11
9. ENVIRONMENTAL SPECIFICATIONS ................................................................................ 12
9.1.
Temperature .......................................................................................................................... 12
9.2.
Humidity................................................................................................................................ 12
9.3.
Ambient Light Immunity ...................................................................................................... 12
9.4.
Dust and Drip Proof .............................................................................................................. 12
9.5.
Vibration Strength(without packing) ................................................................................... 13
9.6.
Vibration Strength (in individual packing) .......................................................................... 13
Drop Impact Strength......................................................................................................................... 13
9.7.
Drop Impact Strength ........................................................................................................... 13
9.8.
Electrical Specifications ........................................................................................................ 13
10. REGULATORY COMPLIANCE............................................................................................... 14
10.1.
Laser Safety ........................................................................................................................... 14
10.2.
Product Safety ....................................................................................................................... 14
10.3.
EMC ....................................................................................................................................... 14
10.4.
Other ...................................................................................................................................... 15
11. ROHS......................................................................................................................................... 15
12. MTBF ........................................................................................................................................ 15
13. PRECAUTIONS........................................................................................................................ 15
13.1.
Precaution against Laser Light ............................................................................................ 15
OPN-2002n
DOC ID：SS1200
13.2.
Handling ................................................................................................................................ 15
13.3.
Radio Low .............................................................................................................................. 16
13.4.
Export Administration Regulations...................................................................................... 16
13.5.
Bluetooth................................................................................................................................ 16
13.6.
Frequency Band..................................................................................................................... 16
14. PRODUCT LABEL ................................................................................................................... 18
15. PACKAGING SPECIFICATIONS ........................................................................................... 19
15.1.
Individual Packaging Specification ...................................................................................... 19
15.2.
Collective Packaging Specification ....................................................................................... 20
16. WARRANTY.............................................................................................................................. 21
16.1.
Warranty period..................................................................................................................... 21
16.2.
Delivery.................................................................................................................................. 21
16.3.
Repair Timeframe.................................................................................................................. 21
16.4.
Maintenance Period............................................................................................................... 21
16.5.
Other ...................................................................................................................................... 21
17. PHYSICAL FEATURES ........................................................................................................... 21
17.1.
Dimensions ............................................................................................................................ 21
17.2.
Weight .................................................................................................................................... 21
17.3.
Mechanical Drawing.............................................................................................................. 22
18. SUPPORTED SYMBOLOGIES ............................................................................................... 23
18.1.
1D symbologies ...................................................................................................................... 23
OPN-2002n
DOC ID：SS12xxx
1. Abstract
This manual provides specifications for the OPN-2002n Laser Barcode Scanner.
2. Overview
The OPN-2002n scanner enables data transmission of barcode using Bluetooth wireless thechnology.
z The OPN-2002n is handy and simple data collector.
Data transmission is performed via a USB or Bluetooth.
z The OPN-2002n has SPP and HID profiles.
z Power supply is 3.7V, 230mAh(typ.) and Lithium-ion polymer battery is used.
z The power supply charging is done via a USB interface or charging cradle.
OPN-2002n
DOC ID：SS12xxx
3. Basic Specification
Item
Spedification
Note
Control
Section
Input
Section
Display
section
RTC
CPU
32bit CISC/96MHz
FROM
512Kbyte + 32KByte
SRAM
96Kbyte
FROM(ストレージ)
1Mbyte
Key type
2 keys: Trigger, Function
LED
bi-colors(red and green) 2pcs, a blue LED
Beeper
Tone:variable
variable
Contents
year, month, day, hour, minute and second
Error
≤±90seconds per a month
Bluetooth
For user data
frequency,
Volume:3-level
Frequency
2402MHz ～ 2480MHz
Specification
Bluetooth Ver2.1
I /F
Communication
10ｍ
distance
It may shorter depending on
usage environments
Output level
Class 2
4dBm max.
Profile
SPP/HID
USB
・Full-Speed 12Mbps ( HID/COM )
・Hi-Power Bus-powered 対応
Serial interface
2contacts for cradle.
Optical
Section
Light emitting device Red laser diode
Wave length / output
650±10nm ≤1mW
power
Scan rate
100±20scan/sec
JAN,EAN,UPC-A,UPC-E,NW-7 (Codabar),
Supported
Industrial 2 of 5,Interleaved 2 of 5,
Symbologies
Code 11，Code 39，Code 93，Code 128 等
at 25 deg. C
Refer to Chapter18 for details
1D Symbologies
Minimum Resolution
Code 39 : 0.127mm
PCS 0.9
Curvature
Radius ≥ 15mm ( 8-digiet JAN)
Radius ≥ 20mm ( 13-digit JAN)
PCS 0.9
Scan Angle
DOF(mm) Code 39
Minimum PCS
Pitch:α≤ ±35°
Skew:β≤ ±50°（Excluding dead zone）
Tilt:γ≤ ±20°
Resolution:0.127
60～100
Resolution:0.15
40～130
Resolution:0.25
40～220
Resolution:0.5
40～360
Resolution:1.0
50～570
PCS 0.9
PCS 0.9
With over 70% reflectivity of
space and quiet zone.
0.45
OPN-2002n
DOC ID：SS12xxx
Item
Specification
Main Battery
Lithium-ion polymer battery 230mAh(typ.)
Up-time
10hours or more
Power
Environmental Specification
Range of
Operation(Charging)
Voltage
Current
consump Charging
tion
Tempera Operating
ture
Storage
Operating
Humidity
Storage
Ambient
Fluorensc
Light
ent
Immunity Sunlight：
Vibration
Drop
Dust and drip proof
<500mA
0 ～ 50 ℃
-20 ～ 60 ℃
20%RH ～ 85%RH
20%RH ～ 85%RH
No frost, no condensation.
No frost, no condensation.
4,000 lx or less
80,000 lx or less
Increase the frequency of vibration from 10 Hz
to 100 Hz at an accelerated velocity of 19.6
m/s2 (2G) for 6 minutes each in X, Y and
Z-direction. Repeated this test for 10 times.
Drop 3 times, at each 6 faces (right, left, front,
back and top), from a height of 120 cm onto a
concrete surface.
IP42
Specification
Safety standards
Regulatory
EMC
Product safety
JIS C 6802：2011 Class2
IEC 60825-1 Ed.2: 2007 Class 2
CDRH Class Ⅱ
EN60950-1:2005
IEC60950-1:2006
EN55022
EN55024
FCC Part 15 Subpart C , Subpart B ClassB
VCCI ClassB
Note
For residential, commercial
and
light-industrial
environments
CE Marking
Bluetooth logo certification
Other
Immunity test
ESD
immunit
When a barcode is scanned
twice in 10 sec. at 25 deg. C
4.5 ～ 5.5 V
Item
Laser safety
Note
No
destruction
10kV (Air)
No
malfunctio
8kV (Air)
Condition:
IEC61000-4-6 compliant
Physical
Features
Dimensions
62.0(D) × 32.0(W) × 17.0(H) (mm)
Weight
Approx. 28g
Excluding the accessories
OPN-2002n
DOC ID：SS12xxx
4. Detailed View
Figure 1:Detailed View
No.
Description
Name
Scanning Window
Scanning Window
Trigger Key
LED
Buzzer Hole
Strap Hole
Function Key
Contact
Laser light is emitted through this window to read bar codes.
The laser light is emitted through this window.
A trigger key used to read bar codes
A function key that can be configured with application
Indicator of operating status, such as bar code reading and
warnings
Sound from a built-in buzzer comes out through these holes.
A hole to attach a hand strap
The contact is for charge and communication.
OPN-2002n
DOC ID：SS12xxx
5. Electrical Specifications
5.1. ＵＳＢ
・Voltage
・Bus-Power Class
・Current consumption
： 4.5-5.5V
： Hi-Power ( 500mA max )
： <500mA
5.2. Charging Cradle
： 4.5-5.5V
・Voltage
6. Interface
The OPN-2002n supports USB, Bluetooth and serial interfaces.
6.1. USB
This interface supported FULL Speed USB.
6.1.1.
Connector
Signal
VCC
Data(-)
Data(+)
( NC )
GND
Pin No.
......
......
Figure 2 : MINI USB B Connector
6.1.2.
USB Interface Circuit
USB connector
3 Data(+)
Microcontroller
+5.0V Power
Figure 3:USBInterface Circuit
Data(-)
VCC
45
GND
OPN-2002n
DOC ID：SS12xxx
6.2. Bluetooth
The OPN-2002n supported Bluetooth.
Frequency
: 2402MHz ～ 2480MHz
Specification
: Bluetooth Ver2.1
Communication
distance
Output level
Supported profiles
: 10ｍ
: Class 2 (4dBm Max.)
: SPP/HID
Topology of connection : Point-to-point
Operating mode
: Master or Slave mode
Security mode
: Enabled
Encryption
: Enabled
6.3. Serial Interface
6.3.1.
Connector
Signal
VCC
RXD
TXD
GND
Pin No.
Figure 4 : Serial Interface Connector
6.3.2.
Serial Interface Circuit
USB connector
3 TXD
Microcontroller
+5.0V Power
RXD
VCC
GND
Figure 5: Serial Interface Cirtuit
OPN-2002n
DOC ID：SS12xxx
7. Optical Specifications
7.1. Laser Scanning Specification
Item
Specification
Light-emitting device
Emission Wave length
Output power
Scan Method
Scan Rate
Scan
Scan Angle
Angle
Effective Scan Angle
Unit
Red laser diode
650±10 (25 deg.C)
<1.0
Bi-directional
100±20
54±5
44 (min.)
nm
mW
Scan/Sec
Deg
Deg
7.2. Laser Scanning Specification
Laser Scanning Tilt
Laser scanning tilt is the vertical difference between both ends of a laser scan line. Measure it in the
middle of the laser scan line.
•
Up to 1.2 degrees angle in vertical direction from the scan origin (mirror motor).
•
Up to 3.1 mm at 150 mm from the scan origin.
7.2.1.
Scanning Curvature
7.2.2.
The maximum difference between the laser scan line and the line between both ends of the laser
scan line. Measure it in the middle of the laser scan line.
•
Up to 1.27 degrees angle in vertical direction from the scan origin (mirror motor).
•
Up to 3.3 mm at 150 mm from the scan origin.
Curvatu
Tilt
re
Horizontal Line
Figure 6 : Laser Scanning Tilt and Curvature
8. Technical Specifications
The conditions for technical specifications are as follows, unless otherwise specified in each section

Ambient Temperature and Humidity
Room temperature, room humidity
Ambient Light
500 ~ 900 lx (excluding high-frequency lighting)
Background
Black
Reading Test
Accept the performance with 10 consecutive successes
in reading. Each reading should be done in 0.5 seconds
or less.
OPN-2002n
DOC ID：SS12xxx
8.1. Print Contrast Signal
PSC 0.45 or higher (70% or higher reflectivity of space and quiet zone)
PCS =
Reflectance of white bar－Reflectance of black bar
Reflectance of white bar
* Be sure to keep the optical window clean without dirt or scratches, or it may have a bad effect on the
reading characteristics.
8.2. Depth of Field and Resolution
Distance in this drawing is measured from the front edge of the scanner.
Figure 7: Depth of Field
Resolution
1.0mm
0.5mm
0.25mm
0.15mm
0.127mm
Depth of Field(mm)
60 ～ 570
40 ～ 360
40 ～ 220
40 ～ 130
50 ～ 100
Symbology
Code 39
Code 39
Code 39
Code 39
Code 39
PCS
0.9
0.9
0.9
0.9
0.9

Bar Code Sample: Optoelectronics Test Chart, N/W ratio = 1:2.5
Angle
: α = 0° β = 15° γ = 0°
Curvature
:R=∞
Quiet Zone
25mm
18mm
10mm
7mm
5mm
Digits
1桁
3桁
8桁
10 桁
4桁
OPN-2002n
DOC ID：SS12xxx
8.3. Pitch, Skew, and Tilt
Pitch
Skew
Dead Zone
Tilt
:γ
: α ≦ ±30°
: β ≦ ±50° (Excluding dead zone)
: β ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection)
≦ ±20°

Bar Code Sample
Distance
Angle
Curvature
Optoelectronics Test Sample

PCS 0.9, Resolution 0.25 mm, 9-digit Code 39,
Quiet Zone 10 mm, N/W Ratio = 1 : 2.5

PCS 0.9, Resolution 0.26 mm, JAN-13, Quiet Zone 10 mm
100 mm from the edge of the scan engine
Pitch angle : β = +15°, γ = 0°
Tilt angle
: α = 0°, β = +15°
Skew angle / Dead zone: α = 0°, γ = 0°
R=∞
OPN-2002n
DOC ID：SS12xxx
Figure 8: Pitch Angle
Figure 9: Skew Angle
Figure 10: Tilt Angle
10
OPN-2002n
DOC ID：SS12xxx
8.4. Curvature
8-digit JAN
13-digit JAN

Bar Code Sample
Distance
Angle
Curvature
: R ≧ 15 mm
: R ≧ 20 mm
Optoelectronics Test Sample
PCS 0.9, Resolution 0.26 mm, JAN-13, Quiet Zone 10 mm
100 mm from the edge of the scan engine
Skew angle β = +15°
R=∞
Figure 11 : Curvature
11
OPN-2002n
DOC ID：SS12xxx
9. Environmental Specifications
9.1. Temperature
Operating
Strage
: 0 ～ 50 ℃
: -20 ～ 60 ℃
9.2. Humidity
Operating
Strage
: 20 ～ 85%RH（no condensation, no frost）
: 20 ～ 85%RH（no condensation, no frost）
9.3. Ambient Light Immunity
Scanning performance is guaranteed when the range of illumination on a barcode surface is the following
values.
Incandescent light : 0 ~ 4,000 lx
Fluorescent light : 0 ~ 4,000 lx
Sunlight
: 0 ~ 80,000 lx

Barcode Test Sample
Distance
Angles
Curvature
Power Voltage
OPTOELECTRONICS test chart
Resolution 0.254 mm PDF417 specified in Chapter 7
89 mm from the front edge of the scanner.
Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°
R=∞
3.7 V
* Be sure that the direct light or specular reflection from the light source does not enter the light receiving
section of the OPN-2002n.
9.4. Dust and Drip Proof
IEC IP42 equivalent
Protection against solid objects: Level 4
Protected against solid objects greater than 1.0 mm
Protection against liquids: Level 2 (JIS IPX2)
Protected against dripping water from the vertical when tilted up to 15°
12
OPN-2002n
DOC ID：SS12xxx
9.5. Vibration Strength(without packing)
There shall be no sign of malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of
19.6m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the non-operating state. Repeat this in each X, Y
and Z direction.
9.6. Vibration Strength (in individual packing)
There shall be no sign of malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6
m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in individually packaged state. Repeat this in each X, Y
and Z direction.
Drop Impact Strength
There shall be no sign of malfunction after the following drop test.
Drop test: Drop the scanner three times (18 times in total), at each 6 face, from a height of 120cm onto a
concrete floor as shown below.
120cm
コンクリート
Figure 12: Drop test
9.7. Drop Impact Strength (in individual packaging)
There shall be no sign of malfunction after the following drop test.
Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces,
from a height of 150 cm onto a concrete floor.
9.8. Electrical Specifications
Air discharge
Measurement environment
Discharge resistance
Charging capacitor
±8 kV max. (No malfunction)
±10 kV max. (No destruction)
An electrostatic testing device compliant with IEC 61000-4-2 is
used.
330 Ω
150 pF
13
OPN-2002n
DOC ID：SS12xxx
10. Regulatory Compliance
10.1. Laser Safety
JIS C 6802：2011 Class 2
IEC 60825-1 Ed.2: 2007 Class 2
CDRH Class Ⅱ
10.2. Product Safety
EN60950-1:2005
IEC60950-1:2006
10.3. EMC
EN55022
EN55024
FCC Part 15 Subpart C , Subpart B ClassB
Federal Communications Commission Notices
This product complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Harmful Interference Notice
This product has been tested and complies with the specifications for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment or devices
• Connect the equipment to an outlet other than the receiver's
• Consult a dealer or an experienced radio/TV technician for assistance
Changes or modifications to this equipment that have not been approved by Ruckus
Wireless may void the user's authority to operate this equipment.
RF Exposure
The OPN-2002n unit (FCC ID: UFOOPN2002N) complies with FCC radiation exposure
limits set forth for uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65. The unit has very low level of RF
energy that it is deemed to comply without testing of specific absorption ratio (SAR).
The equipment must not be co-located or operating in conjuncion with any other
antenna or transmitter
14
OPN-2002n
DOC ID：SS12xxx
VCCI Class B
This is a Class B product, to be used in a domestic environment, based on the Technical
Requirement of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a
domestic environment, it may cause radio interference.
10.4. Other
Bluetooth logo certification
MFi License Program
The OPN-2002n uses Bluetooth module which qualifies as radio equipment for low-power radio
stations as specified in the Radio Law 38-24-1.
Specified Radio Equipment：
Low power data communications system in the 2.4GHz band in Article 2 paragraph 1 item (19),
Ordinance of MPT.
Model type of Bluetooth module：OPA-26X1
Number of certification: 201-125603
11. RoHS
The OPN-2002n is compliant with RoHS.
RoHS: The restriction of the use of certain hazardous substances in electrical and electronic
equipment, 2002/95/EC
12. MTBF
MTBF (Mean Time Between Failures) 10,000 hours
13. Precautions
13.1. Precaution against Laser Light
*Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
Caution - Do not stare into the laser light from a scanning window. It may harm your eyes.
Do not point the laser directly at others’ eyes. It may harm your eyes.
Do not stare into the beam with optical instruments. It may harm your eyes.
13.2. Handling
Handle this product carefully. Do not deliberately subject it to any of the following:
(1) Shock:
• Do not drop this product from a height greater than specified in this manual.
• Do not place this product under or between any heavy items.
• Do not swing this product around holding the hand strap.
(2) Temperature Conditions:
• Do not use this product at temperatures outside the specified range.
• Do not pour boiling water on this product.
• Do not throw this product into a fire.
(3) Foreign Materials:
15
OPN-2002n
DOC ID：SS12xxx
• Do not immerse this product in water or other liquid.
• Do not expose this product to chemicals.
(4) Others
• Do not disassemble this product.
• Do not use this product near a radio or a TV. It may cause reception problems.
• This product may be affected by a momentary voltage drop caused by lightning.
• This product may not perform properly in a place where it will be subjected to a flickering light, such as a
CRT (computer monitor, television, etc.).
13.3. Radio Low
The OPN-2002n uses Bluetooth module which qualifies as radio equipment for low-power radio stations (2.4
GHz band advanced data communication systems) as specified in the Radio Law 38-24-1.
Therefore it does not need to have a radio station license in Japan.
The following activities are prohibited under the Radio Law:
・ Remodeling and disassembly
・ Peeling off the certificate label
Do NOT use the scanner under the following environment, as radio interference may affect other device and
end up with causing physical or material damage.
・ Safety apparatus and medical device for human body protection
・ Environment where is concerned to cause serious damage
13.4. Export Administration Regulations
This product is subject to the strategically controlled exports regulated under “Foreign Exchange and
Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese
government.
13.5. Bluetooth
To communicate via Bluetooth, the device which OPN-2002n is connected to must support the same
Bluetooth version and profile as OPN-2002n’s.
・ OPN-2002n is compliant to Bluetooth standards. However, we cannot assure the connection between
OPN-2002n and other Bluetooth devices which have not been tested.
・ Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also
utilize this frequency band. It may have an effect on the communication speed or communication range of
this data collector.
・ The use of OPN-2002n outside of the European Union, the United States and Canada is punishable under
the law.
・ Communication speed and communication range of OPN-2002n may differ due to the obstacles and radio
wave conditions between OPN-2002n and the device, which OPN-2002n is connected to.
・ Conditions of the device, which OPN-2002n is connected to, may also affect the communication speed
and communication range of OPN-2002n.
13.6. Frequency Band
The frequency band 2.4 GHz is utilized by this product. Read carefully the followings before using this
product.
In the frequency band of this product, scientific, medical and industrial devices including microwaves are
used. Also other radio stations including local private radio station for mobile object identification requiring
16
OPN-2002n
DOC ID：SS12xxx
license for such as manufacturing lines at factories, specific power-saving radio station requiring no license
and amateur radio station are managed.
1. Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before
using this product.
2. In case that radio interference occurs between this product and “other radio stations,” change the
service space immediately, or stop transmitting radio wave to avoid the interference.
3. If you have any questions or troubles, please contact our sales office.
* This specification manual is subject to change without prior notice.
17
OPN-2002n
DOC ID：SS12xxx
14. Product Label
The labels shown below are attached to the back side of the data collector.
Figure 13: Product & Laser Caution Label
18
OPN-2002n
DOC ID：SS12xxx
15. Packaging Specifications
15.1. Individual Packaging Specification
Assembled package size: 125 x 112 x 40 (WDH mm)
AIR PACKING
OPN10018003-0-01
Poly bag
No.3（0.03×80×150）
Neck strap
OPN10019106-0-02
ﾃｰﾌﾟで止める
Mini USB cable（ﾍﾞｰｼﾞｭ）
G9904B099-002
BOX
No.OPN20018001-0-00
ｼﾘｱﾙNo. の 表 示 に つ い て
『 123456 』
123456＝ 製 品ｼﾘｱﾙNo.
6桁のｼﾘｱﾙNo.を表 示
【原産国表示】～country of origin～
中国生産（produced in China）＝MADE IN CHINA
日本生産（produced in Japan）＝MADE IN JAPAN
【国内向】 個装箱ﾊﾞｰｺｰﾄﾞﾗﾍﾞﾙ （3A0002）
Model No.
MADE IN
▲ ▲ ▲▲ ▲
MODEL nNEME
OPN-2002i-BLK
Spec No.
*XF5OPN2002*
*ﾊﾞｰｺｰﾄﾞ*
Item No.
*-*
＊折り目にﾊﾞｰｺｰﾄﾞがかからない事
Serial No.
* △ △ △ △ △ △*
Figure 14: Individual Packaging
19
Quantity
Ｒｏ
OPN-2002n
DOC ID：SS12xxx
15.2. Collective Packaging Specification
Assembled package size: 595 x 520 x 245 (WDH mm), 100 pieces/box
ｼﾘｱﾙNo.の順序
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Carton Box（5B0008 ）100台入り
⑯
①
⑥
⑪
⑰
⑱
②
⑦
⑫
⑭
⑲
⑳
10
15
20
25
30
35
40
45
50
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
⑳
51～ 55
56～ 60
61～ 65
66～ 70
71～ 75
76～ 80
81～ 85
86～ 90
91～ 95
96～100
③
⑧
⑬
1～
6～
11～
16～
21～
26～
31～
36～
41～
46～
④
⑨
⑮
⑩
⑤
5段 入 り
Ｂ： 【 国内向】 Missin g Se rial Numbe rﾗﾍﾞﾙ
Ａ ：【 国内向】 外装箱ﾊ ﾞｰｺｰﾄﾞﾗﾍﾞﾙ
欠品が3 つ以上の場合にのみ貼付する
Aﾗﾍﾞﾙ と並べ正面と背面の2ヶ所に貼付(面の中央付近)
正面と背面の2ヶ所に貼付（面の中央付近）
（3C0007）
（3C0006）
C/No.
△△
C/No.
△△
MADE IN ▲ ▲ ▲ ▲ ▲
MADE IN ▲ ▲▲ ▲ ▲
OPN-2002i-BLK
Product
PO#
Missing Serial Number
Missing Q'ty △△
* △△ △ △ - △ △ *
Spec#
Item#
*XF5OPN2002*
*-*
ﾊﾞｰｺｰﾄﾞ
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
* △△ *
S/N(from)
*000001*
S/N(to)
*000 ▲▲ ▲ *
Missing Serial Number Missing Q'ty △
10
* △ △ △△ △△ *
11
* △ △ △△ △△ *
12
ROM-Ver.(MAIN)
TC01J**
ROM-Ver.(Bluetooht)
Shipping Date
△ △ △ △ △ △
△ △ / △△
Q'ty
TD01J**
20△ △/ △ △/△ △
Ｒｏ
OPTOELECTRONICS CO.,LTD.
OPTOELECTRONICS CO.,LTD.
【原産国表示】～country of origin～
中国生産（produced in China）＝MADE IN CHINA 日本生産（produced in Japan）＝MADE IN JAPAN
Figure 15: Collective Packaging
20
OPN-2002n
DOC ID：SS12xxx
16. Warranty
16.1. Warranty period
OPTOELECTRONICS Co., Ltd. warrants that this product is free of defects or malfunctions for a
period of twelve (12) months from its shipment. In case of having defects or malfunctions caused by
normal usage in accordance with this specification during the foregoing warranty period,
OPTOELECTRONICS shall repair or adjust the product free of charge.
Any repair or replacement of the product after the foregoing warranty period shall be charged at
regular repair rates.
If defects or malfunctions were caused by customer mishandling, product repairs or replacement will
be charged at regular repair rates, even during the foregoing warranty period.
16.2. Delivery
Products for maintenance or repair shall be sent back to OPTOELECTRONICS. The sender is
responsible for all shipping costs.
16.3. Repair Timeframe
Repaired products shall be shipped back to the customer within 20 days after acceptance by
OPTOELECTRONICS.
Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the
customer.
16.4. Maintenance Period
The maintenance period of this product is 5 years after its shipment.
OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance
period if a satisfactory replacement product or maintenance solution is agreed to.
16.5. Other
Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case
basis.
17. Physical Features
17.1. Dimensions
62.0(D) × 32.0(W) × 17.0(H) (mm)
17.2. Weight
Approx. 28g （Excluding the accessories）
21
OPN-2002n
DOC ID：SS12xxx
17.3. Mechanical Drawing
Figure 16:
Mechanical Drawing
22
OPN-2002n
DOC ID：SS12xxx
18. Supported Symbologies
18.1. 1D symbologies
Symbology
JAN13 digits
JAN13 digits + ADDON2 digits
JAN13 digits + ADDON5 digits
JAN8 digits
JAN8 digits + ADDON2 digits
JAN8 digits + ADDON5 digits
EAN13 digits
EAN13 digits + ADDON2 digits
EAN13 digits + ADDON5 digits
EAN8 digits
EAN8 digits + ADDON2 digits
EAN8 digits + ADDON5 digits
Instore Code 13 digits
Instore Code 8 digits
UPC-A
UPC-A+ADDON2 digits
UPC-A+ADDON5 digits
UPC-E
UPC-E+ADDON2 digits
UPC-E+ADDON5 digits
UPC-E1
UPC-E1+ADDON2 digits
UPC-E1+ADDON5 digits
Code 39
NW-7 (Codabar)
Industrial 2 of 5
Symbology
Interleaved 2 of 5
Code 93
Code 128
MSI/Plessey
IATA
UK/Plessey
Telepen
Matrix 2 of 5
ChinesePostMatrix 2 of 5
NW-7 ABC Code
NW-7 CX Code
S-Code
Tri/Optic
Code 39 Full Ascii
Code 39 It.Pharmaceutical
EAN 128
RSS-14
RSS Limited
RSS Expanded
PDF417
MicroPDF417
Code 11
Korean Post
23

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2012:10:10 11:51:20+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:11:07 15:27:10+08:00
Metadata Date                   : 2012:11:07 15:27:10+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SS12003_OPN-2002n_初版_ENG.doc
Creator                         : skonno0287
Document ID                     : uuid:f1c4c89c-ea61-493b-ab71-2c1a44e25024
Instance ID                     : uuid:6a523e81-620b-4797-a5a4-2a7f64dd21d0
Page Count                      : 27
Author                          : skonno0287

EXIF Metadata provided by EXIF.tools