OPTOELECTRONICS OPN2102N Data Collector User Manual

OPTOELECTRONICS Co., Ltd. Data Collector Users Manual

Users Manual

1st OThis ma OPDanual provdata cSPECIFIPNData Colleides specifcollector w ICATIONS M-2ector withfications fowith laser baMANUAL 10h Bluetootor the OPNarcode sca02nth N-2102n Blanner. On uetooth PN-2102n 1st 1
OPN-2102n 1st 2 SPECIFICATIONS MANUAL The information in this document is subject to change without notice. Document History Model Number: OPN-2102n Specification Number: SS16058 Edition: 1st Original Spec Number: (SS16047) Date: 30-September-2016 © 2016 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers Please read this manual carefully before installing or using the product. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your data collector or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Europe Phone: 800-636-0090 Phone: +31235692728 Email: support@opticonusa.com Email: support@opticon.com Web: www.opticonusa.com Web: www.opticon.com
OPN-2102n 1st 3 SPECIFICATIONS MANUAL Revision History Product Name : OPN-2102n Edition Date Page Section Description of Changes 1st 2016/09 /30 - -
OPN-2102n 1st 4 SPECIFICATIONS MANUAL Contents 1 Abstract ............................................................................................................................ 6 2 Overview .......................................................................................................................... 6 3 Basic Specifications ....................................................................................................... 7 4 Detailed View ................................................................................................................... 9 5 Electrical Specifications ............................................................................................... 10 5.1 USB ........................................................................................................................................ 10 5.2 Wireless Charging .................................................................................................................. 10 6 Interface Specifications ................................................................................................ 10 6.1 USB Interface ......................................................................................................................... 10 6.1.1 Connector ....................................................................................................................... 10 6.1.2 USB Interface Circuit ...................................................................................................... 10 6.2 Bluetooth ................................................................................................................................ 11 6.3 NFC Tag ................................................................................................................................. 11 7 Optical Specifications ................................................................................................... 11 7.1 Basic Specifications ............................................................................................................... 11 7.2 Laser Scanning Standards ..................................................................................................... 12 7.2.1 Laser Scanning Tilt ......................................................................................................... 12 7.2.2 Laser Scanning Curvature .............................................................................................. 12 8 Technical Specifications .............................................................................................. 13 8.1 Barcode Test Sample ............................................................................................................. 13 8.2 Scan Area and Depth of Field ................................................................................................ 14 8.3 Printed Contrast Signal (PCS) ............................................................................................... 15 8.4 Minimum Resolution ............................................................................................................... 15 8.5 Pitch, Skew and Tilt ................................................................................................................ 15 8.6 Curvature ................................................................................................................................ 16 9 Environmental Specifications ...................................................................................... 16 9.1 Temperature ........................................................................................................................... 16 9.2 Humidity .................................................................................................................................. 16 9.3 Ambient Light Immunity .......................................................................................................... 17 9.4 Dust and Drip Proof ................................................................................................................ 17 9.5 Vibration Strength (without packing) ...................................................................................... 17 9.6 Vibration Strength (in individual packing) ............................................................................... 17 9.7 Drop Impact Strength (without packaging) ............................................................................. 18 9.8 Drop Impact Strength (in individual packaging) ..................................................................... 18 9.9 Electrostatic Discharge Immunity ........................................................................................... 18 10 Regulatory Compliance ................................................................................................ 19 10.1 LED Safety ............................................................................................................................. 19 10.2 Product Safety ........................................................................................................................ 19 10.3 EMC ........................................................................................................................................ 19 10.4 Other ....................................................................................................................................... 20
OPN-2102n 1st 5 SPECIFICATIONS MANUAL 11 RoHS .............................................................................................................................. 20 12 Reliability ....................................................................................................................... 20 13 Precautions .................................................................................................................... 20 13.1 Precaution against Laser Light ............................................................................................... 20 13.2 Handling ................................................................................................................................. 21 13.3 Radio Law............................................................................................................................... 21 13.4 Bluetooth ................................................................................................................................ 22 13.5 Frequency Band ..................................................................................................................... 22 14 Product Labels .............................................................................................................. 23 15 Packaging Specifications ............................................................................................. 24 15.1 Individual Packaging .............................................................................................................. 24 15.2 Collective Packaging .............................................................................................................. 25 16 Physical Features .......................................................................................................... 26 16.1 Dimensions ............................................................................................................................. 26 16.2 Weight .................................................................................................................................... 26 16.3 Mechanical Drawing ............................................................................................................... 26 17 Supported Symbologies ............................................................................................... 27 17.1 Default Setting ........................................................................................................................ 27 17.2 Supported Symbologies ......................................................................................................... 27 17.2.1 1D Barcodes ................................................................................................................... 27 17.2.2 GS1 Databar, Composite Code ...................................................................................... 28 Table of Figures Figure 1: Detailed View ........................................................................................................................... 9 Figure 2: micro USB B Connector ......................................................................................................... 10 Figure 3: Interface Circuit (USB) ........................................................................................................... 10 Figure 4: Laser Scanning Specification ................................................................................................. 12 Figure 5: Scan Area and Depth of Field ................................................................................................ 14 Figure 6: Pitch, Skew and Tilt ................................................................................................................ 15 Figure 7: Curvature ................................................................................................................................ 16 Figure 8: Drop Test ................................................................................................................................ 18 Figure 9: Product Label Position ........................................................................................................... 23 Figure 10: Individual Packaging ............................................................................................................ 24 Figure 11: Collective Packaging ............................................................................................................ 25 Figure 12: Mechanical Drawing ............................................................................................................. 26
OPN-2102n 1st 6 SPECIFICATIONS MANUAL 1 Abstract This manual provides specifications for the OPN-2102n compact laser data collector with built-in Bluetooth. 2 Overview The OPN-2102n is compact battery powered portable laser scanner with a build-in wireless battery charger. Below are some of the key features: • The OPN-2102n is a handy and simple to use data collector. • The scanned barcode data can be transmitted to a host device through the USB interface or via the build-in Bluetooth interface. • The scanner can work with many Bluetooth enabled host devices, such as PCs, tablets and smart phones. • Bluetooth SPP (Serial Port Profile) and HID (Human Interface Device Profile) are implemented. • Built-in NFC tag allows for “tap to connect” on supported telephones which greatly simplifies the pairing process of Bluetooth. • A red LED aiming line toward a target bar code can help the users find the appropriate scanning position. • Alcohol can be used to wipe the scanner clean • The power source is a 3.7 V 600 mAh (typ.) Li-ion polymer battery. • The OPN-2102n supports wireless charging and a dedicated charging cradle, the CRD-3000 is available for that. The OPN-2102n can also be charged via its USB interface.
OPN-2102n 1st 7 SPECIFICATIONS MANUAL 3 Basic Specifications Item Specification Note Control Section CPU 32 bit CISC / 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte FROM (storage) 1 Mbyte For data area only Input Section Key type 2 key: trigger, function Indicator LED 2 bi-colors LEDs (red, green) and 1 blueLED Buzzer Loudness (3-level) / tone adjustable Vibration motor Strength (3-level) / duration adjustable RTC Contents Year, month, date, hour, minute, second Data and time are lost when the main battery is removed. Accuracy ± 90 seconds per month Interface Bluetooth Frequency 2402 ~ 2480 MHz Specification Bluetooth Ver 2.1 compliant Communication distance 10 m Not guaranteed. Output level Class 2 Max output 4 dBm Profile SPP / HID NFC tag ISO/IEC 14443 TYPE A, TYPE B JISX6319-4 USB ・Full-Speed 12Mbps ( HID/COM ) ・Hi-Power Bus-powered supported Optical Section Light-emitted element Red laser diode Laser wavelength / output 650±10nm 1mW or less Wavelength in temperature 25℃ Scan rate 100±20scan/sec Supported 1D Symbologies Symbologies JAN,EAN,UPC-A,UPC-E,NW-7 (Codabar), Industrial 2 of 5,Interleaved 2 of 5, Code 11，Code 39，Code 93，Code 128 Refer to Section 17. for details Minimum resolution Code 39 : 0.076mm PCS 0.9 Curvature R ≥ 15 mm ( 8-digit JAN) R ≥ 20 mm (13-digit JAN) PCS 0.9 Barcode width 100 mm wide 0.2 mm resolution Code 39 (DOF 150 mm) is readable: Scan angle Pitch : α ≦±35° PCS 0.9 Skew : β ≦±50° (Excluding dead zone) Tilt : γ ≦±20° Depth of Field Code 39 Resolution (1.0) 50 ~ 420 Resolution (0.5) 45 ~ 340 Resolution (0.25) 40 ~ 250 Resolution (0.15) 40 ~ 155 Resolution (0.127) 45 ~ 130
OPN-2102n 1st 8 SPECIFICATIONS MANUAL Item Specification Note Minimum PCS 0.3 or more MRD 32% or more Power Section Main battery Lithium-polymer 600 mAh (typ.) Up-time 25 hours or more *1 Feeding system Electromagnetic guidance wireless charging, microUSB Operating (charging) voltage 4.5 ~ 5.5V Charging with USB Current consumption Charging Less than 500 mA Environmental Specifications Temperature Operating -10 ~ 50°C Storage -20 ~ 60°C Humidity Operating 20 ~ 85% No condensing No frost Storage 20 ~ 85% Ambient light immunity Fluorescent 4,000 lx or less Sunlight 80,000 lx or less Vibration 10 Hz ~ 100 Hz, acceleration of 19.6 m/s2, 60 minutes per cycle, repeat once in each X, Y and Z-direction Drop Drop the scanner 18 times (6 faces x 3) from a height of 150 cm onto a concrete floor Dust and drip proof IP54 equivalent Regulatory Compliance LED safety JIS C 6802：2011 Class2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class Ⅱ Product safety EN60950-1:2005 IEC60950-1:2006 EMC EN 55024:2010 EN 55032:2012+AC: 2013 EN 301 489-1 V1.9.2 EN 301 489-17 V2.2.1 EN 300 328 V1.9.1 EN 302 291-2 V1.1.1 FCC Part 15 Subpart C, Subpart B ClassB VCCI Class B For residential, commercial and light-industrial environments European conformity CE Marking Certification for Construction Design of Specified Radio Equipment Other Bluetooth logo certification Immunity Test ESD No distraction Air discharge (direct): ±15 kV Conditions: IEC61000-4-2 compliant No malfunction Air discharge (direct): ±8 kV Physical FeaturesDimensions 83.0 × 36 × 21.5 (WDH mm) Weight Approx. 60 g Excluding accessories*1: When a barcode is read twice every 10 seconds at room temperature in a constant Bluetooth connection (SPP master mode).
OPN-2102n 1st 9 SPECIFICATIONS MANUAL 4 Detailed View 123456789 Figure 1: Detailed View No Name Description 1 Scan Window The laser light is emitted through this window. Ensure that the lens is not exposed to dust and dirt before scanning. 2 USB Cap Cap for USB connector part used to make the scanner IP54 water tight. 3 Trigger Key Press this key to enable the laser and start reading barcodes. 4 Function Key The function of this key depends on the installed application. 5 LED Indicates operating status, such as bar code reading, Bluetooth connection, warning etc. 6 Buzzer Orifice Holes for buzzer. 7 Strap Orifice Holes for attaching a hand strap. 8 Charging Coil The charging coil is located here with which the dedicated cradle can supply power to the scanner. 9 NFC This is the location of the NFC tag. Hold an NFC reader close to this area when the tag has to be read.
5 Ele5.1 USuBuCu 5.2 WFePo 6 IntThe OPN6.1 UIn 6.1.1 C 6.1.2 ectrical SUSB upply Voltagus-power (Clurrent consuWireless Ceeding systeower consumterface SN-2102n supUSB Interfaterface is FuConnectorSignal NVCDATADATA(NCGNUSB InterfaSpecificae lass)umption harging m mption Specificapports two typace ull Speed USr Name CC A(-) A(+) C) D ace Circuit PowSupMicro-controller SPECIFIations : 4.5-5.5V: 500mA m: Less tha: Electrom: Less thaations pes of interfaB interface.Contact Num1 2 3 4 5 t Figure 3: wer pply ICATIONS MV max (hi-powean 500mA magnetic induan 5W aces; USB anmber : Interface CircMANUAL er) uction nd BluetoothFigucuit (USB) h. re 2: micro USUSB ConnectOSB B Connect ctor PN-2102n 1st 10 tor
OPN-2102n 1st 11 SPECIFICATIONS MANUAL 6.2 Bluetooth The specifications of the OPN-2102n Bluetooth interface are as follows: Frequency : 2402 ~ 2480 MHz Specification : Bluetooth Ver 2.1 compliant Communication distance : 10 m Output level : Class 2 (max 4 dBm) Implemented profile : SPP / HID Communication configuration : 1 to 1 Operating mode in communication : Master / Slave mode Security mode : Authentication supported Encryption : Encryption supported 6.3 NFC Tag OPN2102n has NFC tag built-in which record Bluetooth device address. Frequency: 13.56MHz Standard : ISO/IEC 14443 TYPE A, TYPE B and JISX6319-4 Recorded Contents: Total 928 byte NDEF Record #1 type: ”application/vnd.bluetooth.ep.oob” OOB data length: 8 Byte MAC address: 00:12:6A:xx:xx:xx Record #2 type: ”T” TEXT data length: 15 Byte TEXT data: ”00126Axxxxxx” Free area Reserved area *xx will differ according to product. Rewriting from external: possible 7 Optical Specifications 7.1 Basic Specifications Item Characteristics Unit Light-Emitting Element Red laser diode - Emission Wavelength 650 ±10 (25° C) nm Light Output < 1.0 μW Scanning Method Bi-directional scanning - Scanning Speed 100 ±20 scans/sec Scan Angle Scan Angle 54 ±5 deg Effective Scan Angle 44 (Min) deg
OPN-2102n 1st 12 SPECIFICATIONS MANUAL 7.2 Laser Scanning Standards 7.2.1 Laser Scanning Tilt Vertical differences between both ends of a laser scanning line: - Up to 1.2 degrees in a vertical direction from the scan origin (scanning mirror). - Up to 3.1 mm measured at 150 mm from the scan origin and with zero skew angle. - Measure in the middle of the scanning line. 7.2.2 Laser Scanning Curvature The maximum differences between the laser scanning line and a straight line connecting the both ends of the scanning line: - Up to 1.27 degrees from the scan origin (scanning mirror). - Up to 3.3 mm measured at 150 mm from the scan origin. - Measure in the middle of the scanning line. Figure 4: Laser Scanning Specification
OPN-2102n 1st 13 SPECIFICATIONS MANUAL 8 Technical Specifications Ambient conditions are as follows unless otherwise specified in each section: <Conditions> Ambient Temperature and Humidity Room temperature, room humidity Ambient Light 500 ~ 900 lx Barcodes Refer to Section 8.1. Background Black Power supply voltage 5V (USB) Reading Test Accept the performance with 10 consecutive successes in reading. Each reading should be done in 0.5 seconds or less. 8.1 Barcode Test Sample <Code 39> Resolution Symbology PCS Quiet Zone ()No. of Digits 1.0 mm Code 39 0.9 25 mm 1 0.5 mm 18 mm 3 0.25 mm 10 mm 8 0.25 mm 10 mm 9 0.15 mm 7 mm 10 0.127 mm 5 mm 4 0.076mm 5 mm 5 <JAN> Resolution Symbology PCS Quiet Zone ()No. of Digits 0.26 mm JAN 0.9 10 mm 13 0.26 mm 10 mm 8
OPN-2102n 1st 14 SPECIFICATIONS MANUAL 8.2 Scan Area and Depth of Field The scanner is able to read in the area between the two arcs that are centered on the scan origin with a center line distance from the front of the scanner as indicated for each resolution. Resolution No. of Digits Depth of Field (mm) 1.0mm 1 50 ~ 420 0.5mm 3 45 ~ 340 0.25mm 8 40 ~ 250 0.15mm 10 40 ~ 155 0.127mm 4 45 ~ 130 <Conditions> Barcode : Code 39 specified in Section 8.1. Angle : α = 0°, β = + 15°, γ = 0° 050 100 150 200 250 300 350 4002" 4" 6" 8" 10" 12" 14" 16"0"05050 252575 75100 100 125 1501251500" 2"2" 1"1"3" 3"4" 4" 5" 6"5"6"[ mm ][ inch ]Code 390.127mm ( 5mil )0.15mm ( 6mil )0.25mm ( 10mil )18"450 500 550 60020" 22" 24"175200225250[ mm ]175 200 225 2507"8"9"10"[ inch ]7" 8" 9" 10"0.5mm ( 20mil )1.0mm ( 40mil ) Figure 5: Scan Area and Depth of Field
OPN-2102n 1st 15 SPECIFICATIONS MANUAL 8.3 Printed Contrast Signal (PCS) PSC 0.3 or higher (70% or higher reflectivity of space and quiet zone) Note: Be sure to keep the optical window clean without dirt or scratches, or it may have a detrimental effect on the reading characteristics. 8.4 Minimum Resolution Minimum Resolution 0.076mm <Conditions> Barcode Code 39 specified in Section 8.1 Distance 60 mm from the front edge of the scanner Angle Skew angle β = 15° 8.5 Pitch, Skew and Tilt Pitch : α ≦ ±30° Skew : β ≦ ±50° (Excluding dead zone) Dead Zone : β ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection) Tilt : γ ≦ ±20° <Conditions> Bar code <Pitch, Skew and Dead Zone> Resolution 0.25 mm, 9-digit Code 39 specified in Section 8.1. <Tilt> Resolution 0.26 mm, JAN-13 specified in Section 8.1. Distance 100 mm from the edge of the scan engine Curvature R = ∞ Angle Pitch angle : β = +15°, γ = 0° Tilt angle : α = 0°, β = +15° Skew angle / Dead zone: α = 0°, γ = 0° βγ+++--- Figure 6: Pitch, Skew and Tilt PCS = Reflectance of white space – Reflectance of black barReflectance of white space
OPN-2102n 1st 16 SPECIFICATIONS MANUAL 8.6 Curvature 8-digit JAN: R ≧ 15 mm 13-digit JAN: R ≧ 20 mm <Conditions> Barcode Resolution 0.26 mm, JAN specified in Section 8.1. Distance 100 mm from the edge of the scan engine Angle Skew angle β = +15° Rバーコード Figure 7: Curvature Note: The reading performance may deteriorate if there is specular reflection of the laser light, this typically will occur when the reflectivity of the barcode is high. 9 Environmental Specifications 9.1 Temperature Scanning performance is guaranteed when the ambient temp. is within the following range: Operating Temperature: -10 ~ 50 °C Storage Temperature : -20 ~ 60 °C Please charge when the temperature is between 0 and 40°C. When the temperature is over 40°C, charging may stop to prevent battery breakdown.. 9.2 Humidity Scanning performance is guaranteed when the ambient humidity within following range: Operating Humidity: 20 ~ 85%RH (no condensation, no frost) Storage Humidity: 20 ~ 85%RH (no condensation, no frost) Bar code
OPN-2102n 1st 17 SPECIFICATIONS MANUAL 9.3 Ambient Light Immunity Scanning performance is guaranteed when the illumination on a barcode surface is between zero and the following values: Incandescent light: 4,000 lx Fluorescent light: 4,000 lx (excluding high-frequency lighting) Sunlight: 80,000 lx <Conditions> Barcode: Optoelectronics Test Sample Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1 : 2.5 Distance: 100 mm from the front edge of the scanner Angle: α = 0°, β =＋15°, γ = 0° Curvature: R = ∞ Power-supply voltage: 5.0V * Avoid direct or specula reflection from the laser beam as it may blind the scanners optical receiver. 9.4 Dust and Drip Proof IEC IP54 equivalent Protection against solid objects: Level 5 equivalent (Dust proof type) Prevent dust ingress to inside. Even if slight dust intrusion will not inhibit normal operation. Protection against liquids: Level 4 equivalent (Splash proof type) Protected against water splash from any direction. * () is JIS drip-proof type. 9.5 Vibration Strength (without packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in non-operating state. Repeat this in each X, Y and Z direction. 9.6 Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state. Repeat this in each X, Y and Z direction.
OPN-2102n 1st 18 SPECIFICATIONS MANUAL 9.7 Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm onto a concrete floor as shown below. 150cm Figure 8: Drop Test 9.8 Drop Impact Strength (in individual packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces, from a height of 150 cm onto a concrete floor. 9.9 Electrostatic Discharge Immunity Air discharge ±8 kV max. (No malfunction) ±15 kV max. (No destruction) Measurement environment An electrostatic testing device compliant with IEC 61000-4-2 Discharge resistance 330 Ω Charging capacitor 150 pF
OPN-2102n 1st 19 SPECIFICATIONS MANUAL 10 Regulatory Compliance 10.1 LED Safety JIS C 6802：2011 Class 2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class Ⅱ 10.2 Product Safety EN60950-1:2005 IEC60950-1:2006 10.3 EMC R & TTE Directive ・EN 55024:2010 ・EN 55032:2012+AC: 2013 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.2.1 ・EN 300 328 V1.9.1 ・EN 302 291-2 V1.1.1 FCC Part 15 Subpart C, Subpart B ClassB Federal Communications Commission Notices This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
OPN-2102n 1st 20 SPECIFICATIONS MANUAL VCCI Class B 10.4 Other ・Bluetooth logo certification ・Certification for Construction Design of Specified Radio Equipment ・Classification of Specified Radio Equipment Article 2 Paragraph 1, Item 19 Low power data communication system in 2.4 GHz band ・Model Name OPA-26X1 ・Certificate Number 201-125603 11 RoHS RoHS compliance. RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2011/65/EU 12 Reliability MTBF (Mean Time Between Failures) 50,000 hours 13 Precautions 13.1 Precaution against Laser Light ・ Do not stare into the laser light from the scanning window. It may harm your eyes. ・ Do not point the laser directly at others’ eyes. It may harm their eyes. ・ Do not stare into the beam with optical instruments. It may harm your eyes. ・ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
OPN-2102n 1st 21 SPECIFICATIONS MANUAL 13.2 Handling Handle this product carefully. Do not deliberately subject it to any of the following. (1) Shock: ・ Do not drop this product from a height greater than specified in this manual. ・ Do not place this product under or between any heavy items. ・ Do not swing the cable around. (2) Temperature Conditions: ・ Do not use this product at temperatures outside the specified range. ・ Do not pour boiling water on this product. ・ Do not throw this product into a fire. (3) Foreign Materials: ・ Do not immerse this product in water or other liquid. ・ Do not expose this product to chemicals. Others ・ Do not disassemble this product. ・ Do not use this product near a radio or a TV. It may cause reception problems. ・ This product may be affected by a momentary voltage drop caused by lightning. ・ Please use within the range of operating voltage. Using outside of operating voltage may cause malfunction. ・ Do not attach piece of metal or metal foil to the back of charging coil stored part and NFC coil stored part. Also, do not fix anything that prevents placing to charging cradle. ・ Please securely close the USB cap to keep the waterproof. ・ Do not pull strong, fold and bend the cables. ・ Do not add shock or apply load to jack and connector. ・ When charging is completed, please remove USB cable from connector. 13.3 Radio Law This product qualifies as specified radio equipment for radio stations of 2.4 GHz band data communication system and has obtained the Certification for Construction Design of Specified Radio Equipment. Therefore, radio station license is not required in Japan. The following activities are prohibited under the Radio Law: ・Remodelling and disassembly ・Peeling off the certificate label Do not use this equipment under the following environment, as radio interference may affect other device and end up with causing physical or material damage. ・Safety apparatus and medical device for human body protection ・Environment where is concerned to cause serious damage
OPN-2102n 1st 22 SPECIFICATIONS MANUAL 13.4 Bluetooth ・This product supports Bluetooth wireless communication with other Bluetooth devices that have the same profile ・This product complies with Bluetooth standards; however, its communication performance with untested devices is not guaranteed. ・Bluetooth devices use the 2.4 GHz frequency band that is shared among other devices. It may affect the communication speed and distance between this product and the host device. ・The communication speed and distance vary depending on the interference and radio wave condition between this product and the host device. 13.5 Frequency Band This product uses the 2.4 GHz frequency band. Read carefully the followings before using this product. In the frequency band of this product, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. 1. Make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this product. 2. In case that radio interference occurs between this product and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. 3. If you have any questions or troubles, please contact our sales office. * This specification manual is subject to change without prior notice.
OPN-2102n 1st 23 SPECIFICATIONS MANUAL 14 Product Labels The product labels are affixed to the scanner as shown below. Figure 9: Product Label Position
15 Pa15.1 InAsWackagingndividual Pssembled paWeight: ApproPlace intdo*Place wPlace the Miwith connePlace withbackg SpecificPackagingackage size: ox. 140g OPN-20to the box withown without tawith Opticon loicroUSB cableector far side. h taped side k ward. *Do not foldSPECIFIcationsg Approx. 125Figure 1012n h folded side aped. ogo upward.e Place proneck strapside, thd the barcode w ICATIONS M5 × 112 × 400: Individual Poduct in front sp to the USB chan place QSGwhen pasting MANUAL (WDH mm)Packaging side, and placecable connectoG on the top.12 *UF1O*OPN2OPN-21e or IndividuDisplay 『3456=Produc DisplayOPN2102*2102N-0902n-BLK Oual box label: for the Serial-『123456』 ct serial numbey 6-digets seri* 9* PN-2102n 1st 24 3A0002 -No. er. al number.
15.2 C10AsW bCollective P00pcs per bossembled paWeight: ApproEnter battery tybattery」and phon22-31-31」. And either side of the Packagingox ackage size ox. 15kg *13962* ype 「Lithium ion ne number 「01-24place 1pc next topacking box labelPacking box: 5B*OPN2102N-SPECIFIg : Approx. 5Figure 114-o . 0008 (100pcs per-09* ICATIONS M595 × 520 × 21: Collective Pr box)MANUAL 245 (WDH mPackaging mm) 5 SteThOteps he order of serial-PN-2102n 1st 25 No.
OPN-2102n 1st 26 SPECIFICATIONS MANUAL 16 Physical Features 16.1 Dimensions 83.0 × 36.0 × 21.5 (DWH mm) 16.2 Weight Approx. 60 g (excluding accessories) 16.3 Mechanical Drawing Figure 12: Mechanical Drawing Unit: mm
OPN-2102n 1st 27 SPECIFICATIONS MANUAL 17 Supported Symbologies 17.1 Default Setting The scanner is set to default by reading the following menu label. Recorded contents of the NFC tag will also return to default. Function Menu label Menu codeSET _ZZ_ ZZ Default _SO_ SO END _ZZ_ ZZ 17.2 Supported Symbologies 17.2.1 1D Barcodes Code type Default Minimum length Note UPC ○ - UPC Add-on 2 UPC Add-on 5 EAN (JAN) ○ - EAN Add-on 2 EAN Add-on 5 EAN-13 ○ EAN-13 Add-on 2 EAN-13 Add-on 5 EAN-8 ○ EAN-8 Add-on 2 EAN-8 Add-on 5 Code 39 ○ 1 Not transmit ST/SP Tri-Optic ○ - Not transmit ST/SP Codabar (NW7) ○ 5 Not transmit ST/SP Industrial 2 of 5 ○ 5 Interleaved 2of 5 ○ 6 S-Code 5 Code 128 ○ 1 GS1 conversion (setting required)Code 93 ○ 1 IATA ○ 5 MSI/Plessey ○ 3 UK/Plessey 2 TELEPEN ○ 1 Code 11 1 Matrix 2 of 5 5 Chinese Post Matrix 2 of 5 - Korean Postal Authority -
OPN-2102n 1st 28 SPECIFICATIONS MANUAL 17.2.2 GS1 Databar, Composite Code Code type Default Note GS1 DataBar ・GS1 DataBar Omnidirectional ・GS1 DataBar Truncated ・GS1 DataBar Stacked ・GS1 DataBar Stacked Omnidirectional GS1 conversion (setting required) GS1 DataBar Limited GS1 DataBar Expanded ・GS1 DataBar Expanded ・GS1 DataBar Expanded Stacked

Navigation menu