OPTOELECTRONICS OPN2102N Data Collector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3239492
Application ID	RTTQmI+r/pi1xcuFZG3R/g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.68kB (995962 bits)
Date Submitted	2016-12-26 00:00:00
Date Available	2016-12-27 00:00:00
Creation Date	2016-10-24 19:19:06
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2016-10-24 19:19:06
Document Title	Microsoft Word - SS16058(SS16047)_P-X44Rn_Preliminary_160527_Eng.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	kokamoto3218

SPECIFIICATIONS MANUAL
OPN-21002nn
OP
OPN-2102n
1st
Data
Colle
ector with
h Bluetootth
This ma
anual provides speciffications fo
or the OPN
N-2102n Bl uetooth
data collector
with laser ba
arcode sca
anner.
1st
SPECIFICATIONS MANUAL
OPN-2102n
1st
The information in this document is subject to change without notice.
Document History
Model Number:
Edition:
Date:
OPN-2102n
1st
30-September-2016
Specification Number:
Original Spec Number:
SS16058
(SS16047)
© 2016 Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
Please read this manual carefully before installing or using the product.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should
you need to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of
OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
SUPPORT
USA
Europe
Phone: 800-636-0090
Email: support@opticonusa.com
Web: www.opticonusa.com
Phone: +31235692728
Email: support@opticon.com
Web: www.opticon.com
SPECIFICATIONS MANUAL
OPN-2102n
1st
Revision History
Product Name : OPN-2102n
Edition
st
Date
2016/09 /30
Page
Section
Description of Changes
SPECIFICATIONS MANUAL
OPN-2102n
1st
Contents
Abstract............................................................................................................................ 6
Overview .......................................................................................................................... 6
Basic Specifications ....................................................................................................... 7
Detailed View ................................................................................................................... 9
Electrical Specifications ............................................................................................... 10
5.1
USB ........................................................................................................................................ 10
5.2
Wireless Charging .................................................................................................................. 10
Interface Specifications ................................................................................................ 10
6.1
USB Interface ......................................................................................................................... 10
6.1.1
Connector ....................................................................................................................... 10
6.1.2
USB Interface Circuit ...................................................................................................... 10
6.2
Bluetooth ................................................................................................................................ 11
6.3
NFC Tag ................................................................................................................................. 11
Optical Specifications................................................................................................... 11
7.1
Basic Specifications ............................................................................................................... 11
7.2
Laser Scanning Standards ..................................................................................................... 12
7.2.1
Laser Scanning Tilt ......................................................................................................... 12
7.2.2
Laser Scanning Curvature .............................................................................................. 12
Technical Specifications .............................................................................................. 13
8.1
Barcode Test Sample ............................................................................................................. 13
8.2
Scan Area and Depth of Field ................................................................................................ 14
8.3
Printed Contrast Signal (PCS) ............................................................................................... 15
8.4
Minimum Resolution ............................................................................................................... 15
8.5
Pitch, Skew and Tilt ................................................................................................................ 15
8.6
Curvature ................................................................................................................................ 16
Environmental Specifications ...................................................................................... 16
9.1
Temperature ........................................................................................................................... 16
9.2
Humidity.................................................................................................................................. 16
9.3
Ambient Light Immunity .......................................................................................................... 17
9.4
Dust and Drip Proof ................................................................................................................ 17
9.5
Vibration Strength (without packing) ...................................................................................... 17
9.6
Vibration Strength (in individual packing) ............................................................................... 17
9.7
Drop Impact Strength (without packaging) ............................................................................. 18
9.8
Drop Impact Strength (in individual packaging) ..................................................................... 18
9.9
Electrostatic Discharge Immunity ........................................................................................... 18
10 Regulatory Compliance ................................................................................................ 19
10.1
LED Safety ............................................................................................................................. 19
10.2
Product Safety ........................................................................................................................ 19
10.3
EMC........................................................................................................................................ 19
10.4
Other....................................................................................................................................... 20
SPECIFICATIONS MANUAL
OPN-2102n
1st
11 RoHS .............................................................................................................................. 20
12 Reliability ....................................................................................................................... 20
13 Precautions.................................................................................................................... 20
13.1
Precaution against Laser Light ............................................................................................... 20
13.2
Handling ................................................................................................................................. 21
13.3
Radio Law............................................................................................................................... 21
13.4
Bluetooth ................................................................................................................................ 22
13.5
Frequency Band ..................................................................................................................... 22
14 Product Labels .............................................................................................................. 23
15 Packaging Specifications ............................................................................................. 24
15.1
Individual Packaging .............................................................................................................. 24
15.2
Collective Packaging .............................................................................................................. 25
16 Physical Features.......................................................................................................... 26
16.1
Dimensions ............................................................................................................................. 26
16.2
Weight .................................................................................................................................... 26
16.3
Mechanical Drawing ............................................................................................................... 26
17 Supported Symbologies ............................................................................................... 27
17.1
Default Setting ........................................................................................................................ 27
17.2
Supported Symbologies ......................................................................................................... 27
17.2.1
1D Barcodes ................................................................................................................... 27
17.2.2
GS1 Databar, Composite Code ...................................................................................... 28
Table of Figures
Figure 1: Detailed View ........................................................................................................................... 9
Figure 2: micro USB B Connector ......................................................................................................... 10
Figure 3: Interface Circuit (USB) ........................................................................................................... 10
Figure 4: Laser Scanning Specification ................................................................................................. 12
Figure 5: Scan Area and Depth of Field ................................................................................................ 14
Figure 6: Pitch, Skew and Tilt ................................................................................................................ 15
Figure 7: Curvature................................................................................................................................ 16
Figure 8: Drop Test................................................................................................................................ 18
Figure 9: Product Label Position ........................................................................................................... 23
Figure 10: Individual Packaging ............................................................................................................ 24
Figure 11: Collective Packaging ............................................................................................................ 25
Figure 12: Mechanical Drawing ............................................................................................................. 26
SPECIFICATIONS MANUAL
OPN-2102n
1st
1 Abstract
This manual provides specifications for the OPN-2102n compact laser data collector with built-in
Bluetooth.
2 Overview
The OPN-2102n is compact battery powered portable laser scanner with a build-in wireless battery
charger. Below are some of the key features:
• The OPN-2102n is a handy and simple to use data collector.
• The scanned barcode data can be transmitted to a host device through the USB interface or via the
build-in Bluetooth interface.
• The scanner can work with many Bluetooth enabled host devices, such as PCs, tablets and smart
phones.
• Bluetooth SPP (Serial Port Profile) and HID (Human Interface Device Profile) are implemented.
• Built-in NFC tag allows for “tap to connect” on supported telephones which greatly simplifies the
pairing process of Bluetooth.
• A red LED aiming line toward a target bar code can help the users find the appropriate scanning
position.
• Alcohol can be used to wipe the scanner clean
• The power source is a 3.7 V 600 mAh (typ.) Li-ion polymer battery.
• The OPN-2102n supports wireless charging and a dedicated charging cradle, the CRD-3000 is
available for that. The OPN-2102n can also be charged via its USB interface.
SPECIFICATIONS MANUAL
OPN-2102n
1st
3 Basic Specifications
Item
Specification
Control
Section
Input
Section
Indicator
RTC
CPU
32 bit CISC / 96 MHz
FROM
512 Kbyte + 32 Kbyte
SRAM
96 Kbyte
FROM (storage)
1 Mbyte
Key type
2 key: trigger, function
LED
2 bi-colors LEDs (red, green) and 1 blueLED
Buzzer
Loudness (3-level) / tone adjustable
Vibration motor
Strength (3-level) / duration adjustable
Contents
Year, month, date, hour, minute, second
Accuracy
± 90 seconds per month
Interface
Bluetooth
Note
For data area only
Data and time are lost
when the main battery
is removed.
Frequency
2402 ~ 2480 MHz
Specification
Bluetooth Ver 2.1 compliant
Communication
distance
10 m
Not guaranteed.
Output level
Class 2
Max output 4 dBm
Profile
SPP / HID
ISO/IEC 14443 TYPE A, TYPE B
JISX6319-4
・Full-Speed 12Mbps ( HID/COM )
・Hi-Power Bus-powered supported
NFC tag
USB
Optical
Section
Light-emitted element
Red laser diode
Laser wavelength
/ output
650±10nm 1mW or less
Scan rate
100±20scan/sec
Symbologies
JAN,EAN,UPC-A,UPC-E,NW-7 (Codabar),
Industrial 2 of 5,Interleaved 2 of 5,
Code 11，Code 39，Code 93，Code 128
Refer to Section 17.
for details
Minimum resolution
Code 39 : 0.076mm
PCS 0.9
Wavelength in
temperature 25℃
Supported 1D Symbologies
R ≥ 15 mm ( 8-digit JAN)
R ≥ 20 mm (13-digit JAN)
100 mm wide 0.2 mm resolution Code 39 (DOF 150
mm) is readable:
Curvature
Barcode width
PCS 0.9
Pitch : α ≦±35°
Scan angle
Skew : β ≦±50° (Excluding dead zone)
Tilt
Depth of Field
Code 39
PCS 0.9
: γ ≦±20°
Resolution (1.0)
50 ~ 420
Resolution (0.5)
45 ~ 340
Resolution (0.25)
40 ~ 250
Resolution (0.15)
40 ~ 155
Resolution (0.127)
45 ~ 130
SPECIFICATIONS MANUAL
Item
Specification
Power Section
Minimum PCS
0.3 or more
Main battery
Lithium-polymer 600 mAh (typ.)
Up-time
25 hours or more
Feeding system
Electromagnetic guidance wireless charging,
microUSB
Operating (charging) voltage
4.5 ~ 5.5V
Current
consumption
Charging
Less than 500 mA
Operating
-10 ~ 50°C
Storage
-20 ~ 60°C
Operating
20 ~ 85%
Storage
20 ~ 85%
Fluorescent
4,000 lx or less
Sunlight
80,000 lx or less
Temperature
Environmental Specifications
Humidity
Ambient light
immunity
OPN-2102n
1st
Note
MRD 32% or more
*1
Charging with USB
No condensing
No frost
10 Hz ~ 100 Hz, acceleration of 19.6 m/s2, 60
minutes per cycle, repeat once in each X, Y and Zdirection
Drop the scanner 18 times (6 faces x 3) from a
height of 150 cm onto a concrete floor
Vibration
Drop
Dust and drip proof
IP54 equivalent
JIS C 6802：2011 Class2
IEC 60825-1 Ed.2: 2007 Class 2
CDRH Class Ⅱ
EN60950-1:2005
IEC60950-1:2006
EN 55024:2010
EN 55032:2012+AC: 2013
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 300 328 V1.9.1
EN 302 291-2 V1.1.1
FCC Part 15 Subpart C, Subpart B ClassB
VCCI Class B
LED safety
Product safety
Regulatory Compliance
EMC
For residential,
commercial and lightindustrial
environments
CE Marking
European conformity
Other
Immunity
Test
ESD
Certification for Construction Design of Specified
Radio Equipment
Bluetooth logo certification
No
distraction
No
malfunction
Air discharge (direct): ±15 kV
Air discharge (direct): ±8 kV
Physical
Features
Dimensions
83.0 × 36 × 21.5 (WDH mm)
Weight
Approx. 60 g
Conditions:
IEC61000-4-2
compliant
Excluding accessories
*1: When a barcode is read twice every 10 seconds at room temperature in a constant Bluetooth connection (SPP
master mode).
SPECIFICATIONS MANUAL
OPN-2102n
1st
4 Detailed View
Figure 1: Detailed View
No
Name
Scan Window
Description
The laser light is emitted through this window. Ensure that the lens is
not exposed to dust and dirt before scanning.
USB Cap
Cap for USB connector part used to make the scanner IP54 water tight.
Trigger Key
Press this key to enable the laser and start reading barcodes.
Function Key
The function of this key depends on the installed application.
LED
Indicates operating status, such as bar code reading, Bluetooth
connection, warning etc.
Buzzer Orifice
Holes for buzzer.
Strap Orifice
Holes for attaching a hand strap.
Charging Coil
NFC
The charging coil is located here with which the dedicated cradle can
supply power to the scanner.
This is the location of the NFC tag. Hold an NFC reader close to this
area when the tag has to be read.
SPECIFIICATIONS MANUAL
OPN-2102n
1st
5 Ele
ectrical Specifica
ations
5.1
USB
Su
upply Voltage
Bu
us-power (Cllass)
Cu
urrent consu
umption
5.2
: 4.5-5.5V
: 500mA m
max (hi-powe
er)
: Less tha
an 500mA
Wireless Charging
Fe
eeding system
Po
ower consum
mption
: Electrom
magnetic indu
uction
: Less tha
an 5W
6 Intterface Specifica
ations
The OPN
N-2102n sup
pports two typ
pes of interfa
aces; USB an
nd Bluetooth
h.
6.1
USB Interfa
ace
Interface is Fu
ull Speed USB interface.
6.1.1
Connectorr
Signal Name
Contact
Num
mber
VCC
DATA
A(-)
DATA
A(+)
(NC
C)
GND
Figure 2: micro US
SB B Connecttor
6.1.2
USB Interfa
ace Circuitt
USB Connect
ctor
Pow
wer
Sup
pply
Microcontroller
Figure 3:: Interface Circ
cuit (USB)
10
SPECIFICATIONS MANUAL
6.2
OPN-2102n
1st
Bluetooth
The specifications of the OPN-2102n Bluetooth interface are as follows:
Frequency
: 2402 ~ 2480 MHz
6.3
Specification
: Bluetooth Ver 2.1 compliant
Communication distance
: 10 m
Output level
: Class 2 (max 4 dBm)
Implemented profile
: SPP / HID
Communication configuration
: 1 to 1
Operating mode in communication
: Master / Slave mode
Security mode
: Authentication supported
Encryption
: Encryption supported
NFC Tag
OPN2102n has NFC tag built-in which record Bluetooth device address.
Frequency:
13.56MHz
Standard :
Recorded Contents:
ISO/IEC 14443 TYPE A, TYPE B and JISX6319-4
Total 928 byte
NDEF
Record #1
type: ”application/vnd.bluetooth.ep.oob”
OOB data length: 8 Byte
MAC address: 00:12:6A:xx:xx:xx
Record #2
type: ”T”
TEXT data length: 15 Byte
TEXT data: ”00126Axxxxxx”
Free area
Reserved area
*xx will differ according to product.
Rewriting from external: possible
7 Optical Specifications
7.1
Basic Specifications
Item
Unit
Characteristics
Light-Emitting Element
Red laser diode
Emission Wavelength
650 ±10 (25° C)
nm
Light Output
< 1.0
μW
Scanning Method
Bi-directional scanning
Scanning Speed
100 ±20
scans/sec
54 ±5
deg
44 (Min)
deg
Scan Angle
Scan Angle
Effective Scan
Angle
11
SPECIFICATIONS MANUAL
7.2
7.2.1
OPN-2102n
1st
Laser Scanning Standards
Laser Scanning Tilt
Vertical differences between both ends of a laser scanning line:
- Up to 1.2 degrees in a vertical direction from the scan origin (scanning mirror).
- Up to 3.1 mm measured at 150 mm from the scan origin and with zero skew angle.
- Measure in the middle of the scanning line.
7.2.2
Laser Scanning Curvature
The maximum differences between the laser scanning line and a straight line connecting the
both ends of the scanning line:
- Up to 1.27 degrees from the scan origin (scanning mirror).
- Up to 3.3 mm measured at 150 mm from the scan origin.
- Measure in the middle of the scanning line.
Figure 4: Laser Scanning Specification
12
SPECIFICATIONS MANUAL
OPN-2102n
1st
8 Technical Specifications
Ambient conditions are as follows unless otherwise specified in each section:

Ambient Temperature and Humidity
Room temperature, room humidity
Ambient Light
500 ~ 900 lx
Barcodes
Refer to Section 8.1.
Background
Power supply voltage
Black
5V (USB)
Accept the performance with 10 consecutive successes
in reading. Each reading should be done in 0.5 seconds
or less.
Reading Test
8.1
Barcode Test Sample

Resolution
1.0 mm
0.5 mm
0.25 mm
0.25 mm
0.15 mm
0.127 mm
0.076mm
Symbology
PCS
Code 39
0.9
Symbology
PCS
JAN
0.9
Quiet Zone
( mm
25
18 mm
10 mm
10 mm
7 mm
5 mm
5 mm
No. of Digits
10

Resolution
0.26 mm
0.26 mm
Quiet Zone
( mm
10
10 mm
No. of Digits
13
13
SPECIFICATIONS MANUAL
Scan Area and Depth of Field
The scanner is able to read in the area between the two arcs that are centered on the scan
origin with a center line distance from the front of the scanner as indicated for each resolution.
Resolution
No. of Digits
Depth of Field (mm)
1.0mm
50 ~ 420
0.5mm
45 ~ 340
0.25mm
40 ~ 250
0.15mm
10
40 ~ 155
0.127mm
45 ~ 130

Barcode
Angle
: Code 39 specified in Section 8.1.
: α = 0°, β = + 15°, γ = 0°
0"
2"
4"
6"
8"
50
100
150
200
10"
14"
12"
16"
18"
20"
22"
24"
[ inch ]
[ mm ]
350
400
450
500
550
600
10"
300
8"
200
0.25mm ( 10mil )
7"
175
Code 39
6"
150
0.15mm ( 6mil )
5"
125
4"
100
0.127mm ( 5mil )
3"
75
2"
50
25
1"
0"
25
1"
50
2"
75
3"
100
4"
125
5"
150
6"
7"
175
200
8"
225
9"
250
250
Figure 5: Scan Area and Depth of Field
14
[ inch ]
1.0mm ( 40mil )
10"
250
9"
225
0.5mm ( 20mil )
[ mm ]
8.2
OPN-2102n
1st
SPECIFICATIONS MANUAL
8.3
OPN-2102n
1st
Printed Contrast Signal (PCS)
PSC 0.3 or higher (70% or higher reflectivity of space and quiet zone)
PCS =
Reflectance of white space – Reflectance of black bar
Reflectance of white space
Note:
Be sure to keep the optical window clean without dirt or scratches, or it may have a detrimental effect on
the reading characteristics.
8.4
Minimum Resolution
Minimum Resolution 0.076mm

Barcode
Distance
Angle
8.5
Code 39 specified in Section 8.1
60 mm from the front edge of the scanner
Skew angle β = 15°
Pitch, Skew and Tilt
Pitch
Skew
Dead Zone
Tilt

Bar code
Distance
Curvature
Angle
: α ≦ ±30°
: β ≦ ±50° (Excluding dead zone)
: β ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection)
: γ ≦ ±20°

Resolution 0.25 mm, 9-digit Code 39 specified in Section 8.1.

Resolution 0.26 mm, JAN-13 specified in Section 8.1.
100 mm from the edge of the scan engine
R=∞
Pitch angle : β = +15°, γ = 0°
Tilt angle : α = 0°, β = +15°
Skew angle / Dead zone: α = 0°, γ = 0°
β
γ
Figure 6: Pitch, Skew and Tilt
15
SPECIFICATIONS MANUAL
8.6
OPN-2102n
1st
Curvature
8-digit JAN:
13-digit JAN:

Barcode
Distance
Angle
R ≧ 15 mm
R ≧ 20 mm
Resolution 0.26 mm, JAN specified in Section 8.1.
100 mm from the edge of the scan engine
Skew angle β = +15°
バーコード
Bar code
Figure 7: Curvature
Note:
The reading performance may deteriorate if there is specular reflection of the laser light, this typically will occur
when the reflectivity of the barcode is high.
9 Environmental Specifications
9.1
Temperature
Scanning performance is guaranteed when the ambient temp. is within the following range:
Operating Temperature:
Storage Temperature :
-10 ~ 50 °C
-20 ~ 60 °C
Please charge when the temperature is between 0 and 40°C. When the temperature is over 40°C,
charging may stop to prevent battery breakdown..
9.2
Humidity
Scanning performance is guaranteed when the ambient humidity within following range:
Operating Humidity:
20 ~ 85%RH (no condensation, no frost)
Storage Humidity:
20 ~ 85%RH (no condensation, no frost)
16
SPECIFICATIONS MANUAL
9.3
OPN-2102n
1st
Ambient Light Immunity
Scanning performance is guaranteed when the illumination on a barcode surface is between
zero and the following values:
Incandescent light:
Fluorescent light:
Sunlight:

Barcode:
Distance:
Angle:
Curvature:
Power-supply voltage:
4,000 lx
4,000 lx (excluding high-frequency lighting)
80,000 lx
Optoelectronics Test Sample
Resolution 0.25 mm, 9-digit Code 39,
Quiet Zone 10 mm, N/W Ratio = 1 : 2.5
100 mm from the front edge of the scanner
α = 0°, β =＋15°, γ = 0°
R=∞
5.0V
* Avoid direct or specula reflection from the laser beam as it may blind the scanners optical receiver.
9.4
Dust and Drip Proof
IEC IP54 equivalent
Protection against solid objects: Level 5 equivalent (Dust proof type)
Prevent dust ingress to inside. Even if slight dust intrusion will not inhibit normal operation.
Protection against liquids: Level 4 equivalent (Splash proof type)
Protected against water splash from any direction.
* () is JIS drip-proof type.
9.5
Vibration Strength (without packing)
There shall be no sign of malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated
velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in non-operating state.
Repeat this in each X, Y and Z direction.
9.6
Vibration Strength (in individual packing)
There shall be no sign of malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated
velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state.
Repeat this in each X, Y and Z direction.
17
SPECIFICATIONS MANUAL
9.7
OPN-2102n
1st
Drop Impact Strength (without packaging)
There shall be no sign of malfunction after the following drop test.
Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm
onto a concrete floor as shown below.
150cm
Figure 8: Drop Test
9.8
Drop Impact Strength (in individual packaging)
There shall be no sign of malfunction after the following drop test.
Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges,
and 6 faces, from a height of 150 cm onto a concrete floor.
9.9
Electrostatic Discharge Immunity
Air discharge
±8 kV max. (No malfunction)
±15 kV max. (No destruction)
Measurement environment
Discharge resistance
Charging capacitor
An electrostatic testing device compliant with IEC 61000-4-2
330 Ω
150 pF
18
SPECIFICATIONS MANUAL
OPN-2102n
1st
10 Regulatory Compliance
10.1 LED Safety
JIS C 6802：2011 Class 2
IEC 60825-1 Ed.2: 2007 Class 2
CDRH Class Ⅱ
10.2 Product Safety
EN60950-1:2005
IEC60950-1:2006
10.3 EMC
R & TTE Directive
・EN 55024:2010
・EN 55032:2012+AC: 2013
・EN 301 489-1 V1.9.2
・EN 301 489-17 V2.2.1
・EN 300 328 V1.9.1
・EN 302 291-2 V1.1.1
FCC Part 15 Subpart C, Subpart B ClassB
Federal Communications Commission Notices
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This product complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Harmful Interference Notice
This product has been tested and complies with the specifications for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which is found by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment or devices
• Connect the equipment to an outlet other than the receiver's
• Consult a dealer or an experienced radio/TV technician for assistance
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
19
SPECIFICATIONS MANUAL
OPN-2102n
1st
VCCI Class B
This is a Class B product, to be used in a domestic environment, based on the Technical
Requirement of the Voluntary Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it
may cause radio interference.
10.4 Other
・Bluetooth logo certification
・Certification for Construction Design of Specified Radio Equipment
・Classification of Specified
Radio Equipment
・Model Name
・Certificate Number
Article 2 Paragraph 1, Item 19 Low power data
communication system in 2.4 GHz band
OPA-26X1
201-125603
11 RoHS
RoHS compliance.
RoHS: The restriction of the use of certain hazardous substances in electrical and
electronic equipment, 2011/65/EU
12 Reliability
MTBF (Mean Time Between Failures)
50,000 hours
13 Precautions
13.1 Precaution against Laser Light
・ Do not stare into the laser light from the scanning window.
It may harm your eyes.
・ Do not point the laser directly at others’ eyes.
It may harm their eyes.
・ Do not stare into the beam with optical instruments.
It may harm your eyes.
・ Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
20
SPECIFICATIONS MANUAL
OPN-2102n
1st
13.2 Handling
Handle this product carefully. Do not deliberately subject it to any of the following.
(1) Shock:
・ Do not drop this product from a height greater than specified in this manual.
・ Do not place this product under or between any heavy items.
・ Do not swing the cable around.
(2) Temperature Conditions:
・ Do not use this product at temperatures outside the specified range.
・ Do not pour boiling water on this product.
・ Do not throw this product into a fire.
(3) Foreign Materials:
・ Do not immerse this product in water or other liquid.
・ Do not expose this product to chemicals.
Others
・ Do not disassemble this product.
・ Do not use this product near a radio or a TV. It may cause reception problems.
・ This product may be affected by a momentary voltage drop caused by lightning.
・ Please use within the range of operating voltage. Using outside of operating voltage may
cause malfunction.
・ Do not attach piece of metal or metal foil to the back of charging coil stored part and NFC coil
stored part. Also, do not fix anything that prevents placing to charging cradle.
・ Please securely close the USB cap to keep the waterproof.
・ Do not pull strong, fold and bend the cables.
・ Do not add shock or apply load to jack and connector.
・ When charging is completed, please remove USB cable from connector.
13.3 Radio Law
This product qualifies as specified radio equipment for radio stations of 2.4 GHz band data
communication system and has obtained the Certification for Construction
Design of Specified Radio Equipment. Therefore, radio station license is not required in Japan.
The following activities are prohibited under the Radio Law:
・Remodelling and disassembly
・Peeling off the certificate label
Do not use this equipment under the following environment, as radio interference may affect
other device and end up with causing physical or material damage.
・Safety apparatus and medical device for human body protection
・Environment where is concerned to cause serious damage
21
SPECIFICATIONS MANUAL
OPN-2102n
1st
13.4 Bluetooth
・This product supports Bluetooth wireless communication with other Bluetooth devices that
have the same profile
・This product complies with Bluetooth standards; however, its communication performance
with untested devices is not guaranteed.
・Bluetooth devices use the 2.4 GHz frequency band that is shared among other devices. It
may affect the communication speed and distance between this product and the host device.
・The communication speed and distance vary depending on the interference and radio wave
condition between this product and the host device.
13.5 Frequency Band
This product uses the 2.4 GHz frequency band. Read carefully the followings before using this
product.
In the frequency band of this product, scientific, medical and industrial devices including
microwaves are used. Also other radio stations including local private radio station for mobile
object identification requiring license for such as manufacturing lines at factories, specific
power-saving radio station requiring no license and amateur radio station are managed.
1. Make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before
using this product.
2. In case that radio interference occurs between this product and “other radio stations,” change
the service space immediately, or stop transmitting radio wave to avoid the interference.
3. If you have any questions or troubles, please contact our sales office.
* This specification manual is subject to change without prior notice.
22
SPECIFICATIONS MANUAL
OPN-2102n
1st
14 Product Labels
The product labels are affixed to the scanner as shown below.
Figure 9: Product Label Position
23
SPECIFIICATIONS MANUAL
OPN-2102n
1st
15 Pa
ackaging
g Specific
cations
15.1 In
ndividual Packaging
Asssembled pa
ackage size: Approx. 125
5 × 112 × 40 (WDH mm)
Weight: Appro
ox. 140g
OPN-2012n
Place intto the box with
h folded side
do
own without ta
aped.
*Place with
w Opticon lo
ogo upward.
Display for the Serial--No.
『
『123456』
123456=Producct serial numbe
er.
Displayy 6-digets serial number.
Place the MiicroUSB cable
with conne
ector far side.
Place with
h taped side
backk ward.
Place pro
oduct in front side,
and place
neck strap
p to the USB cable
connecto
or
side, th
han place QSG
G on the top.
Individuual box label: 3A0002
OPN-2102n-BLK
*UF1O
OPN2102*
*OPN2
2102N-09
9*
*Do not fold
d the barcode w
when pasting
Figure 10
0: Individual Packaging
24
SPECIFIICATIONS MANUAL
OPN-2102n
1st
15.2 C
Collective Packaging
10
00pcs per bo
ox
Asssembled pa
ackage size
Weight: Appro
ox. 15kg
: Approx. 5
595 × 520 × 245
2 (WDH mm)
Thhe order of serial-No.
Packing box: 5B0008 (100pcs perr box)
Enter battery tyype 「Lithium ion
battery」and phon
ne number 「01-24
422-31-31」. And place 1pc next to
either side of the packing box label.
5 Ste
teps
*13962*
*OPN2102N--09*
Figure 11
1: Collective Packaging
25
SPECIFICATIONS MANUAL
OPN-2102n
1st
16 Physical Features
16.1 Dimensions
83.0 × 36.0 × 21.5 (DWH mm)
16.2 Weight
Approx. 60 g (excluding accessories)
16.3 Mechanical Drawing
Unit: mm
Figure 12: Mechanical Drawing
26
SPECIFICATIONS MANUAL
OPN-2102n
1st
17 Supported Symbologies
17.1 Default Setting
The scanner is set to default by reading the following menu label.
Recorded contents of the NFC tag will also return to default.
Function
Menu label
Menu code
_ZZ_
_SO_
_ZZ_
SET
Default
END
ZZ
SO
ZZ
17.2 Supported Symbologies
17.2.1 1D Barcodes
Code type
UPC
UPC Add-on 2
UPC Add-on 5
EAN (JAN)
EAN Add-on 2
EAN Add-on 5
EAN-13
EAN-13 Add-on 2
EAN-13 Add-on 5
EAN-8
EAN-8 Add-on 2
EAN-8 Add-on 5
Code 39
Default
○
Minimum length
○
Note
○
○
○
Not transmit ST/SP
Tri-Optic
○
Not transmit ST/SP
Codabar (NW7)
○
Not transmit ST/SP
Industrial 2 of 5
○
Interleaved 2of 5
○
S-Code
Code 128
○
Code 93
○
IATA
○
MSI/Plessey
○
UK/Plessey
TELEPEN
GS1 conversion (setting required)
○
Code 11
Matrix 2 of 5
Chinese Post Matrix 2 of 5
Korean Postal Authority
27
SPECIFICATIONS MANUAL
OPN-2102n
1st
17.2.2 GS1 Databar, Composite Code
Code type
GS1 DataBar
・GS1 DataBar Omnidirectional
・GS1 DataBar Truncated
・GS1 DataBar Stacked
・GS1 DataBar Stacked Omnidirectional
GS1 DataBar Limited
GS1 DataBar Expanded
・GS1 DataBar Expanded
・GS1 DataBar Expanded Stacked
Default
Note
GS1 conversion (setting required)
28

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:10:24 19:19:06+09:00
Create Date                     : 2016:10:24 19:19:06+09:00
Format                          : application/pdf
Title                           : Microsoft Word - SS16058(SS16047)_P-X44Rn_Preliminary_160527_Eng.docx
Creator                         : kokamoto3218
Document ID                     : uuid:2899974b-5bc0-4111-9caa-ad6e9558baf2
Instance ID                     : uuid:6b9c9daa-041b-425c-bed6-81ea4e9a49d1
Page Count                      : 28
Author                          : kokamoto3218