OPTOELECTRONICS PX35 Wireless 2D Data Collector User Manual manual

OPTOELECTRONICS Co., Ltd. Wireless 2D Data Collector manual

manual

PX-35 SSxxxxx Master Specifications 2D Data Collector with Bluetooth Product Name PX-35 Specification No SSxxxxx Edition Initial release Date of Publication Dec 6,2010 Original Doc. No. SS10016 OPTOELECTRONICS Co., Ltd. 4-12-17 Tsukagoshi, Warabi-shi, Saitama, 335-0002 Japan TEL: 81+(0)48-446-1183 FAX: 81+(0)48-446-1184
PX-35 SSxxxxx Revision History Specification No.: SSxxxxx Product name : PX-35 Revision Date Section Description of Changes Initial release 2010/12/6 - -
PX-35 SSxxxxx Table of Contents 1. Abstract .........................................................................................................................................1 2. Overview .......................................................................................................................................1 3. Physical Features .........................................................................................................................2 4. Basic Specifications ......................................................................................................................4 5. Optical Specifications....................................................................................................................7 6. Technical Specifications................................................................................................................7 7. Bluetooth .....................................................................................................................................11 8. Serial Label .................................................................................................................................12 9. Packaging Specifications............................................................................................................13 10. Durability ...................................................................................................................................13 11. Warranty....................................................................................................................................16 12. Regulatory Compliance ............................................................................................................17 13. RoHS.........................................................................................................................................18 14. Precautions ...............................................................................................................................18 Appendix 1 ......................................................................................................................................21 Appendix 2 ......................................................................................................................................22
PX-35 SSxxxxx 1 1. Abstract This manual provides specifications for the data collector with an embedded 2D data collector which offers Bluetooth, PX-35. 2. Overview ・ PX-35 consists of CMOS image sensor and auto focus. ・ Scanned data is output via Bluetooth interface. ・ Bluetooth and IrDA (for the communication with the dedicated cradle) interface enables data communication with higher models. ・ This product is compliant with RoHS. 2.1. Product / Model Name Product name: PX-35 2.2. Features of PX-35 ・ Compact and handy design ・ The data collector is able to read 2D barcodes. ・ Stored data is sent to the recipient through Bluetooth interface. On the other hand, IrDA can communicate with host PC via the dedicated cradle. ・ Embedded Bluetooth is compliant to version 1.2 and has installed profile. ・ PX-35 can operate for a long time with a dedicated built-in lithium-ion battery (1880mh). ・ Unit is charged when placing it on the dedicated cradle. (To directly connect the dedicated adapter to PX-35 can also charge the unit.)
PX-35 SSxxxxx 2 3. Physical Features 3.1. Dimensions Figure1 : Dimensions 3.2. Weight Max. 132g (including lithium-ion battery pack) 1404426単位：mmUnit:mm
PX-35 SSxxxxx 3 3.3. Physical Features Figure2 : Physical features No. Item Specification 1. Scanning window LED light for scanning barcode is emitted from the window. 2. IrDA Use for the communication with dedicated cradle 3. LED To notify the status of barcode scanning, Bluetooth communication, and warnings so on. 4. LCD Indicates scanned barcodes and operational items 5. Trigger key Press when scanning barcodes 6. Up / Down keys Used when selecting items from a menu. 7. 10 operational keys Used for numerical, “ENTER”, decimal point input. 8. DC Jack Used for the dedicated power supply 9. Speaker 10. Terminals Used to charge a lithium-ion battery of a unit when placing the unit on the dedicated terminal 11. Battery cover Remove when replacing the rechargeable battery 12. Battery cover lock Used to lock / open the battery cover 13. Strap hole Hole for attaching a hand strap 81234567910111213
PX-35 SSxxxxx 4 4. Basic Specifications Item Specification Remark CPU 32Bit RISC Micro computer (ARM7 Core) Produced by ST Micro Embedded ROM 256Kbyte + 16Kbyte (for DATA) Control section Embedded RAM 64Kbyte FROM(NOR) 4Mbyte (User area: about 1Mbyte) OS/AP Memory SRAM 2Mbyte (User area : about 480kbyte) 4Mbyte (Option) for WORK/DATA OS μITRON LCD semi-transmissive LCD Number of dots 112×64 dots Display section Back light Available Operating section Key type 18 keys Indication LED Tri-colored emitting elements (red/green/blue) Buzzer Adjustable volume/tone Specification Bluetooth Ver1.2 HCI module produced by Kyocera Installed profile SPP Stack produced by iAnywhere Frequency 2402MHz to 2480MHz Transmission power Class 2 Communication range Perspective 10m Communication range may differ due to the environments. Baud rate 115.2kbps Bluetooth Antenna 1/4λ (surface mounted) IrDA IrDA Ver1.2(physical layer compliant) Baud rate: Maximum 115.2Kbps Main power Lithium-ion secondary battery 1880mAh Regular voltage 3.7V How to charge With a dedicated AC adapter or cradle With a rubber pad for the jack part With a dedicated AC adapter: about 4 hours and half Charging time With a dedicated cradle: about 7 hours and half Scanning frequency Over 30,000 times *1 Up-time 25 hours *2 Backup battery MS (Manganeese Silicon) lithium secondary battery 3.4mAh Without full discharge Power supply Data holding time 72 hours or less After main battery has been discharged.
PX-35 SSxxxxx 5 Item Specification Remark Scanning method CMOS area sensor (black/white) Number of effective pixel 900x512 pixels MSI-2305 Light source White LED Scanning angle range Horizontal: 40° Vertical: 23° 2D PDF417, Micro PDF417, QR Code, Micro QR Code, Data Matrix (ECC 0-140, ECC200), Maxi Code(mode2~5), Aztec Code, EAN / UCC Composite bar code, Intelligent Mail Barcode, Japanese Postal, Postnet (US) 2D barcode scanning section (MDI-230x specification) Supported symbology 1D WPC (EAN, JAN, UPC-A / UPC-E UPC-E1), Industrial 2 of 5, IATA, Interleaved 2 of 5, NW-7 (CODABAR), Code 39, Code 93, Code 128, GS1-128, Tri-Optic, MSI / Plessey, UK / Plessey, TELEPEN, S-Code, Code 11, Matrix2 of 5, Korean Postal Authority code, CODABLOCK F, GS1 DataBar Dimensions 140×44×26mm Weight Max. 132g (including lithium-ion battery pack) Operation temperature and humidity -10°C to 40°C 20%RH to 85%RH No frost, no condensation Storage temperature and humidity -20°C to 60°C 20%RH～85%RH No frost, no condensation Conditions Charging temperature 0 to 40°C Frequency ６sides, 3cycles Height 150cm Drop test *4 Floor Concrete Dust and drip proof IP42 Regulatory compliance IEC 60825-1:2007 Class 1 CE Marking, FCC Bluetooth logo certification Accessories Dedicated lithium-ion battery (1880mAh) Hand strap User’s manual
PX-35 SSxxxxx 6 Item Specification Remark Dedicated cradle For IrDA communication / charging Option Dedicated AC adapter [6V/2000mA] For charging *1 when scanning a barcode once per second at room temperature + frequency of connecting to Bluetooth. *2 when scanning a barcode twice in 10 seconds at room temperature + frequency of connecting to Bluetooth. *3 Shock resistance Conditions of the shock resistance test are: ・ Does not count scratches or whitening on a surface as a malfunction. ・ Shock resistance is approved when no malfunction occurs after the test. ・ Shock resistance is approved if the battery cover is not unhooked after the test
PX-35 SSxxxxx 7 5. Optical Specifications Item Specifications Unit Scanning method CMOS area sensor - Scanning speed 80 fps Effective pixels 900(H)×512(V) Pixel Aiming LED color temperature (White LED x 2) 8200 K Scan angle Horizontal: 40 Vertical: 23 deg 6. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Item Conditions Ambient temperature and humidity Room temperature and humidity Ambient light 1,000 to 1,500 lx ( barcode surface ) Light source 3 wave lengths inverter fluorescent Angles α= 0° β= ＋15° γ= 0° Curvature R = ∞ Power supply voltage 3.3V Decoding test Approve the performance when decoding is successful in 70% of ten tests performed. Barcode sample As specified below <Bar Code> Resolution Barcode PCS Size [mm] Digit 0.254mm Code 39 0.9 14×10 2 0.1mm Code 39 0.9 11×10 4 0.26mm JAN-13 0.9 25×19 13 0.26 mm JAN- 8 0.9 17.5×15.5 8 Barcode sample: OPTOELECTRONICS test sample – Resolution = 0.127mm or OPTOELECTRONICS test sample – Resolution = 0.26mm N:W ratio = 1:2.5 <PDF417> Resolution Error correction PCS Size [mm] Number of character 0.339mm Level-4 0.9 35×22 17 0.254mm Level-4 0.9 26×16 17 0.127mm Level-4 0.9 13×8 17 Barcodes printed by a normal printer – aspect ratio = 3 : 1
PX-35 SSxxxxx 8 <QR Code (Model-2)> Resolution Error correction PCS Size [mm] Number of character 0.339mm M 0.9 10×10 44 0.169mm M 0.9 5×5 44 Barcodes printed by a normal printer <Data Matrix> Resolution Error correction PCS Size [mm] Number of character 0.339mm ECC200 0.9 8×8 40 0.169mm ECC200 0.9 4×4 40 Barcodes printed by a normal printer *As for the size of each barcode, quiet zone length is excluded. 6.1. Decode Depth of Field and Resolution The depth of decode field is measured from the case front the data collector. [単位：mm]40Code39JAN13PDF417Data MatrixMicro QR CodeQR Code100 200 300 40035 11035 220110 90045 32035 11022035 19035 9035 14035 100分解能:0.127分解能:0.254分解能:1.0分解能:0.33分解能:0.127分解能:0.254分解能:0.381分解能:0.169分解能:0.254分解能:0.127 Figure3: Scanning field unit:mm
PX-35 SSxxxxx 9 6.2. Printed Contrast Signal 0.45 (MRD 32%) or higher (over 70% of reflectivity of space and ) *Scanning performance may decline if dirt or scratches mar the optical window. Keep the optical window clean. 6.3. Pitch, skew and tilt Pitch angle: α = ±50° Skew angle β = ±60° Tilt angle: γ = 360° Conditions: Barcode sample: Code39, PDF417, Resolution 0.254mm, PCS0.9 as specified in the section 6. Distance: 63mm from the focal plane of the data collector Curvature: R = ∞ (For pitch/tilt angles, skew angle β = +15°) Figure4: Pitch, skew and tilt *When scanning symbologies printed on highly glazed paper such as glossy paper or card case, scanning performance of this data collector may decline due to the specular reflection of LEDs. In such cases, adjust scanning angle by incline the data collector to 15 degrees toward the skew direction to improve scanning performance. When turning off the lighting LED, it may decline the scanning performance unless the ambient light is 1000 lx or higher. Also, the light or reflection light caught by the camera may decline scanning performance, when using codes on the above described paper.
PX-35 SSxxxxx 10 6.4. Curvature With 8-digit JAN barcode, decoding performance is guaranteed when R≥15 mm. With 13-digit JAN barcode, decoding performance is guaranteed when R≥20 mm. Conditions Barcode sample: Code 39, PDF417, Resolution 0.254mm, PCS0.9 as specified in the section 6. Distance: 63mm from the focal plane of the data collector Curvature: R = ∞ (For pitch/tilt angles, skew angle β = +15°) Figure5: Curvature
PX-35 SSxxxxx 11 7. Bluetooth Bluetooth wireless communication is used as a wireless interface. 7.1. Installed Profile SPP(Serial Port Profile) 7.2. Communication Configuration 1 to 1 (One data collector to one host system) 7.3. Operating Mode While Connected to the Host System Master / slave mode ( *1 ) *1 It can be set by the application software. 7.4. Security Mode Authentication enabled 7.5. Encryption Encryption enabled
PX-35 SSxxxxx 12 8. Serial Label The labels shown below are affixed to the data collector. 生産年・生産月印刷色：黒　シリアルＮｏ．印刷色：黒(H=5)(H=7)(H=5)文字・ロゴ印刷色：黒 Figure 7: Serial label and FCC caution label
PX-35 SSxxxxx 13 9. Packaging Specifications 9.1. Individual Packaging Specification Put the data collector in a protective foam bag and place it in an individual packing box. Size of the package (after assembly) 255(W) × 120(D) × 105(H) mm Refer to Appendix 1. 9.2. Collective Packaging Specification Refer to Appendix 2. Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union. 10. Durability 10.1. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light 10,000 lx Fluorescent light 10,000 lx Sunlight 1000,000 lx Conditions Barcode sample: Code39, Resolution 0.254mm, PCS0.9 as specified in the section 6. Distance: 63mm from the focal plane of the data collector Angles: α = 0°, β = +15°, γ = 0° Curvature: R = ∞ * Direct light or specular reflection from a light source should be prevented from entering the acceptance area. 10.2. Dust and Drip Proof IP42 10.3. Vibration Strength (without packaging) No malfunction occurred after the following test. Vibration test: Increase the frequency of the vibration from 10Hz to 100 Hz with accelerated velocity 19.6m2/s (2G) for 60 minutes in non-operating state Repeat this routine in each X, Y, Z direction once for 60 minutes each.
PX-35 SSxxxxx 14 10.4. Vibration Strength (with individual packaging) No malfunction occurred after the following test. Vibration test: Increase the frequency of the vibration from 10Hz to 100 Hz with accelerated velocity 19.6m2/s (2G) for 60 minutes in individually packaged state. Repeat this routine in each X, Y, Z direction once for 60 minutes each. 10.5. Drop Test (without packaging) No malfunction occurred after the following test. Drop test: Drop the data collector from a height of 150cm onto a concrete floor. (Three times in each of 6 angles) Figure 9: Drop Test ( without packaging ) 10.6. Drop Test (with individual packaging) No malfunction occurred after the following test. Drop test: Drop an individually packaged data collector from a height of 70cm onto a concrete floor once on its 1 corner, 3edges, and 6 sides. (10 total drop tests)
PX-35 SSxxxxx 15 10.7. Static Electricity Air discharge: ±10 kV max. (No malfunction) ±15 kV max. (No destruction) Contact discharge: ±6 kV max. (No malfunction) ±10 kV max. (No destruction) Measurement environment: Use electrostatic testing device compliant with IEC 61000-4-2. Discharge resistance: 330 Ω Capacitor charging: 150 pF 10.8. Reliability MTBF 10,000 hours
PX-35 SSxxxxx 16 11. Warranty 11.1. Warranty Period Optoelectronics Co., Ltd. (hereinafter ‘Optoelectronics’) warrants that this product is free of defects and malfunctions for a period of 12 (twelve) months beginning on the last day of the month in which it is shipped. Optoelectronics will repair product defects or malfunctions that arise in the course of normal usage during the twelve-month warranty period free of charge. Any repair or replacement of the product after the foregoing warranty period will be charged at regular rates. Repair or replacement of the product due to defects or malfunctions that arise as a result of customer mishandling will be charged at regular rates, even during the foregoing warranty period. 11.2. Delivery Products for maintenance or repair shall be sent back to Optoelectronics. The sender is responsible for all shipping costs. 11.3. Repair Timeframe Repaired products shall be shipped back to the customer within 20 days after acceptance by OPTOELECTRONICS. However, the time needed for the repair of products with early failures need to be separately discussed with Optoelectronics. Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the customer. 11.4. Maintenance Period The maintenance period of this product is 5 years after its shipment. OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance period if a satisfactory replacement product or maintenance solution is agreed to. 11.5. Others Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case basis.
PX-35 SSxxxxx 17 12. Regulatory Compliance 12.1. LED Safety Lamp classification: IEC62471:2006 Exempt Group 12.2. LASER Safety ・ IEC 60825-1:2007 Class 1 ・ CDRH Class I 12.3. Product Safety ・ IEC60950-1 ・ EN60950-1 12.4. EMC ・EN55022 ・EN55024 ・FCC Part15 subpart B Class B ・FCC Part15 subpart C This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
PX-35 SSxxxxx 18 ・VCCI Class B 12.5. R&TTE ・ EN300 328 ・ EN301 489-1 ・ EN301 489-17 12.6. Others ・ Certification for Construction Design of Specified Radio Equipment ・ Bluetooth logo certification 13. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 14. Precautions 14.1. Precaution about the LED Light Do not stare into the laser light from a scanning window. It may harm your eyes. Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 14.2. Radio Low The data collector has obtained the Certification for Construction Design of Specified Radio Equipment. Therefore it does not need to have a radio station license in Japan. The following activities are prohibited under the Radio Law: ・ Remodeling and disassembly ・ Peeling off the certificate label Do NOT use the data collector under the following environment: *Otherwise radio interference may affect other device and end up with causing physical or material damage. ・ Safety apparatus and medical device for human body protection ・ Environment where is concerned to cause serious damage This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
PX-35 SSxxxxx 19 14.3. Handling Handle this product carefully. Do not deliberately subject it to any of the following. (1) Shock ・ Do not drop from the non-standard height. ・ Do not place any heavy items on the data collector. ・ Do not squeeze it between any heavy items. ・ Do not swing around the cable. (2) Temperature Conditions ・ Do not use the data collector at temperatures outside the specified range. ・ Do not pour boiling water on the data collector. ・ Do not throw the data collector into the fire. (3) Foreign Materials ・ Do not put the data collector into liquid. ・ Do not put the data collector into chemicals. (4) Others ・ Do not disassemble this product. ・ Do not use the data collector near a radio or a TV receiver. It may cause reception problems. ・ The data collector may be damaged by voltage drops caused by lightning. ・ The data collector may not perform properly in environments when placed near a flickering light, such as a CRT 14.4. Export Administration Regulations This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government. 14.5. Bluetooth To communicate via Bluetooth, the device which PX-35 is connected to must support the same Bluetooth version and profile as PX-35’s. ・ PX-35 is compliant to Bluetooth standards. However, we cannot assure the connection between PX-35 and other Bluetooth devices which have not been tested. ・ Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also utilize this frequency band. It may effect the communication speed or communication range of this data collector. ・ The use of PX-35 outside of the European Union, the United States and Canada is punishable under the law. ・ Communication speed and communication range of PX-35 may differ due to the obstacles and radio wave conditions between PX-35 and the device, which PX-35 is connected to. ・ Conditions of the device, which PX-35 is connected to, may also affect the communication speed and communication range of PX-35.
PX-35 SSxxxxx 20 14.6. Frequency Baud The frequency band 2.4 GHz is utilized by this scanner. Read carefully the followings before using this product. In the frequency band of this scanner, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this scanner. In case that radio interference occurs between this scanner and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. If you have any questions or troubles, please contact our marketing group.
PX-35 SSxxxxx 21 Appendix 1 Individual Packaging Specification BATTERY BTR040x Quick Start Guide (PX-35019062-0-00) PX-35 *XF1PX35* △△△△
PX-35 SSxxxxx 22 Appendix 2 Collective Packaging Specification PX-35 *XF1PX35* FM42J△△ △△△△ △△△△

Navigation menu