ORION ELECTRIC M2C5C TV Interface Device User Manual

ORION ELECTRIC CO., LTD. TV Interface Device Users Manual

Users Manual

DVD/VCR DECKOperating InstructionsModel No. PV-D734SPV-D744SFor assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comPlease read these instructions carefully before attempting to connect, operate, or adjust this product.Please save this manual.Spanish Quick Use Guide is included.(Guía para rápida consulta en español está incluida.)TV/CATV MODE SELECTIONWhen shipped from the factory, the TV/CATV menu option is set to the “CATV” (Cable Television)mode. If not using CATV, set this menu option to the “TV” position.As an ENERGY STAR® Partner, Matsushita Electric Corporationof America has determined that this product or product modelmeets the ENERGY STAR® guidelines for energy efficiency.*Ability to play back may depend on recording conditions. 2C51801A Cover 18/07/2003, 10:461DRAFT
2WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE.CAUTION:THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY ANDRETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT ANAUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLELASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTOBEAM.Location of the required MarkingThe rating sheet and the safety caution are on the rear of the unit.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTIONThe lightning flash with arrowheadsymbol, within an equilateral triangle isintended to alert the user to the presenceof uninsulated dangerous voltage withinthe product's enclosure that may be ofsufficient magnitude to constitute a riskof electric shock to persons.The exclamation point within an equilateraltriangle is intended to alert the user tothe presence of important operating andmaintenance (servicing) instructions inthe literature accompanying the appliance.CAUTION:TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance withthe FCC Rules could void the user's authority to operate this equipment.CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCESTANDARDS, 21 CFR SUBCHAPTER J. 2C51801A (02-05) 18/07/2003, 10:462
31. READ INSTRUCTIONSAll the safety and operating instructions should be read before the unit is operated.2. RETAIN INSTRUCTIONSThe safety and operating instructions should be retained for future reference.3. HEED WARNINGSAll warnings on the unit and in the operating instructions should be adhered to.4. FOLLOW INSTRUCTIONSAll operating and use instructions should be followed.5. CLEANINGUnplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.Use a damp cloth for cleaning the exterior cabinet only.6. ATTACHMENTSThe manufacturer of this unit does not make any recommendations for attachments, as they may causehazards.7. WATER AND MOISTUREDo not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wetbasement, or near a swimming pool.8. ACCESSORIESDo not place this unit on an unstable cart, stand, tripod, bracket, or table.The unit may fall, causing serious injury, and serious damage to the unit.8A. An appliance and cart combination should be moved with care. Quick stops,excessive force, and uneven surfaces may cause the appliance and cartcombination to overturn.9. VENTILATIONSlots and openings in the cabinet back or bottom are provided for ventilation,to ensure reliable operation of the unit, and to protect it from overheating.These openings must not be blocked or covered. The openings should never be blocked by placing the uniton a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heatsource. This unit should not be placed in a built-in installation such as a bookcase or rack unless properventilation is provided and/or the manufacturer’s instructions have been adhered to.10. POWER SOURCESThis unit should be operated only from the type of power source indicated on the rating plate. If you are notsure of the type of power supply to your home, consult your appliance dealer or local power company. Forunits intended to operate from battery power, or other sources, refer to the operating instructions.11. GROUNDING OR POLARIZATIONThis unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than theother). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insertthe plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician toreplace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equippedwith a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a ground-ing-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contactyour electrician to replace your obsolete outlet.Do not defeat the safety purpose of the grounding-type plug.12. POWER-CORD PROTECTIONPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placedupon or against them, paying particular attention to cords at plugs, convenience receptacles, and the pointwhere they exit from the appliance.S3125APORTABLE CART WARNING(symbol provided by RETAC)IMPORTANT SAFEGUARDS 2C51801A (02-05) 18/07/2003, 10:463
413. LIGHTNINGTo protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to theunit due to lightning and power line surges.14. POWER LINESAn outside antenna system should not be located in the vicinity of overhead power lines or other electriclight or power circuits, or where it can fall into such power lines or circuits. When installing an outsideantenna system, extreme care should be taken to keep from touching such power lines or circuits, ascontact with them might be fatal.15. OVERLOADINGDo not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.16. OBJECT AND LIQUID ENTRYDo not push objects through any openings in this unit, as they may touch dangerous voltage points or shortout parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.17. OUTDOOR ANTENNA GROUNDINGIf an outside antenna or cable system is connected to the unit, be sure the antenna or cable system isgrounded to provide some protection against voltage surges and built-up static charges, Section 810 of theNational Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mastand supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of groundingconductors, location of antenna discharge unit, connection to grounding electrodes, and requirements forthe grounding electrode.18. SERVICINGDo not attempt to service this unit yourself as opening or removing covers may expose you to dangerousvoltage or other hazards. Refer all servicing to qualified service personnel.19. DAMAGE REQUIRING SERVICEUnplug this unit from the wall outlet and refer servicing to qualified service personnel under the followingconditions:a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fallen into the unit.c. If the unit has been exposed to rain or water.d. If the unit does not operate normally by following the operating instructions. Adjust only thosecontrols that are covered by the operating instructions, as an improper adjustment of other controlsmay result in damage and will often require extensive work by a qualified technician to restore theunit to its normal operation.e. If the unit has been dropped or the cabinet has been damaged.f. When the unit exhibits a distinct change in performance, this indicates a need for service.20. REPLACEMENT PARTSWhen replacement parts are required, be sure the service technician uses replacement parts specified bythe manufacturer or those that have the same characteristics as the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.21. SAFETY CHECKUpon completion of any service or repairs to this unit, ask the service technician to perform safety checks todetermine that the unit is in proper operating condition.22. HEATThe product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts (including amplifiers) that produce heat.23. DISC TRAYKeep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.24. CONNECTINGWhen you connect the product to other equipment, turn off the power and unplug all of the equipment fromthe wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner'smanual of the other equipment carefully and follow the instructions when making any connections.IMPORTANT SAFEGUARDS 2C51801A (02-05) 18/07/2003, 10:464
5EXAMPLE OF ANTENNA GROUNDING AS PER THENATIONAL ELECTRICAL CODECONDENSATIONMoisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into awarm room or if the temperature of the room rises suddenly. When this happens, the DVD/VCR's performancewill be impaired.To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, ormake sure that the room temperature rises gradually.Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an airconditioner. In such cases, change the location of the DVD/VCR.25. LASER BEAMDo not look into the opening of the disc tray or ventilation opening of the product to see the source of thelaser beam. It may cause sight damage.26. DISCDo not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause seriouspersonal injury and product malfunction.27. NOTE TO CATV SYSTEM INSTALLERThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC thatprovides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-nected to the grounding system of the building, as close to the point of cable entry as practical.ANTENNADISCHARGE UNIT(NEC SECTION 810-20)ANTENNA LEAD IN WIREGROUNDING CONDUCTORS(NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)GROUND CLAMPELECTRIC SERVICEEQUIPMENTNEC-NATIONAL ELECTRICAL CODES2898AIMPORTANT SAFEGUARDSThis product incorporates copyright protection technology that is protected by method claims of certain U.S. patentsand other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyrightprotection technology must be authorized by Macrovision Corporation and is intended for home and other limitedviewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly isprohibited.Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of DolbyLaboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringethe rights of copyright owners and be contrary to copyright laws.MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.***** 2C51801A (02-05) 18/07/2003, 10:465
6Discs that can be playedDisc informationDisc HandlingHandling precautions• Do not attach sticker to discs. (Do not usediscs with exposed adhesive from tape orleft over peeled-off stickers.)• Only hold disc byedges as shown.Fingerprints, dirt, andscratches can causeskipping and distortion.• Do not write on labelside of disc.• Never use recordcleaning sprays,benzine, thinner,static electricitypreventionliquids, or anyother solvent.• Be careful notto drop or bend disc.• Do not place more than 1 disc on disc tray.• Do not try to close disc tray when disc isnot properly placed.• Always store discs in their proper caseswhen not in use.Definition of TermsAngleSome DVD discs feature scenes simultaneously shot from different angles.The ANGLE button can be used to view the scene from different angles.Chapter NumberTitles are subdivided into numbered sections. You can quickly search fora favorite scene using these numbers.DVDA high-density optical disc on which high-quality pictures and sound havebeen digitally recorded. DVD incorporates new video compression tech-nology (MPEG II) and high-density recording technology which allow en-tire movies to be recorded with incredible playback quality.SubtitlesWritten dialogue which appears at the bottom of the screen.Time NumberThe elapsed play time from the start of a disc or title. Use to quickly findscenes. (May not work with some discs.)Title NumberFor DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.Track NumberNumbers assigned to tracks on CDs to allow specific tracks to be quicklylocated.• Discs played 8 cm (3") or 12 cm (5").• * A process that allows play on compatible equipment.• This unit can play back FUJICOLOR and Kodak Picture CD formats.Discs which cannot be played with this unit• DVD with Region No. other • CD-ROMthan “1” or “ALL” • CDV• DVD of PAL system • CVD• DVD-RAM • CD-G• DVD-ROM • CD-TEXT• DVD-AUDIO • VCD• DVD-R/RW • SVCD• DVD+R/RW • SACD• Photo-CDIf disc is brought from a cold to a warmenvironment, moisture may form on thediscWipe away moisture with a soft, dry, lint-freecloth before using disc. (See above.)Improper disc storageDiscs could be damaged if stored or left inareas:• exposed to direct sunlight.• that are humid or dusty.• near heat (i.e. heater, radiator, etc.).To clean disc surfaceWith a soft, damp (water only) cloth, gentlywipe from the center hole to the outer edgeas shown below. (Wiping in a circular patternwill scratch the surface.)Region Management InformationThis unit is designed and manufactured to respond to the RegionManagement Information that is recorded on a DVD disc. If theRegion number described on the DVD disc does not correspond tothe Region number of this unit, this unit cannot play this disc.• The region number of this player is “1.”• The player will play DVD-Video marked with labels containing “1” or“ALL.”DiscDisc trayExample:Disc type DiscLogo Disc formats supported by this unitDVD-Video• DVD-Video format CD-DA• CD-DA format CD-R• CD-DA format • MP3 and JPEG file (finalized*)CD-RW 2C51801A (06-11) 18/07/2003, 10:466
7ContentsIMPORTANT SAFEGUARDS ..........................3Disc information ............................................... 6Contents ...........................................................7Parts and functions ..........................................8Display .............................................................9Remote control ............................................... 10Power source .................................................11Basic connections ..........................................12CATV (CABLE TV) connections.....................14Playback connections .................................... 16Before using your unitRecording a TV program ................................ 28One-touch Timer Recording (OTR) ................ 30Timer recording .............................................. 31RecordingStereo recording and playback ...................... 33Second Audio Program (SAP)........................ 33Duplicating a video tape ................................. 34Advanced function of VCR sectionCassette tape playback .................................. 25Special playback ............................................ 26ZERO SEARCH function................................ 27Video index search system ............................ 27Tape playback operationSetting the video channel ............................... 18Setting the language ...................................... 18Auto clock setting ........................................... 19Manual clock setting....................................... 21Tuner setting .................................................. 22To ADD/DELETE channels............................. 23Weak signal display ....................................... 23Loading and Unloading a cassette tape ......... 24Setting up the VCR sectionSetting setup language .................................. 35Progressive scan mode.................................. 35Playback procedure ....................................... 36Special playback ............................................ 37Zooming ......................................................... 38Locating desired scene .................................. 38Marking desired scenes ................................. 39Repeat playback ............................................ 40Program playback/Random playback (CD) .... 41Changing soundtrack language ..................... 42Subtitles ......................................................... 42Karaoke playback........................................... 42Changing angles ............................................ 43Title selection ................................................. 43DVD menu...................................................... 43MP3/JPEG playback ...................................... 44Disc playback operationParental control .............................................. 47Temporary disabling of rating level by DVD disc ...48Setting menu language .................................. 49Setting subtitle language ................................ 50Setting audio soundtrack language ................ 51Setting the aspect ratio of TV screen ............. 52Setting on screen display ............................... 53Status display of disc ..................................... 53Dynamic Range Control ................................. 54Advanced function of DVD sectionLanguage code list ......................................... 55Problems and troubleshooting ....................... 56Built-in head cleaner (Model PV-744S only) .. 57Video head cleaning....................................... 57Specifications ................................................. 58Spanish Quick Use Guide(Guía para rápida consulta) ........................... 59Limited Warranty ............................................ 64Customer Services Directory ......................... 65Index .............................................................. 66Additional informationAccessoriesRemote Control(076N0HR010)Batteries 2 “AAA”(1411004015)RF Cable(06CPL02006) 2C51801A (06-11) 18/07/2003, 10:467
8Discs that can be playedPOWERVCRVIDEO IN 2L– AUDIO IN 2 – RCHANNELOPEN/CLOSESTOP PLAY SKIP DVDRECFFREWPLAYSTOPVCR/DVD EJECTParts and functionsRearFrontAC power cordDVD/VCR common AUDIO (L/R)/VIDEO OUT jacksS-VIDEO/COMPONENTVideo selector switchDVD COAXIAL DIGITALAUDIO OUT jackRF IN jackDVD OPTICAL DIGITALAUDIO OUT jackDVD S-VIDEOOUT jackDVD COMPONENT OUT jacksRF OUT jackDVD AUDIO (L/R)OUT jacksSTOP buttonDisc trayCassette Loading SlotPOWER buttonAUDIO (L/R)/VIDEO IN jacks(LINE 2)VCR indicatorDVD indicatorCHANNEL /buttonsDisplay windowRemote sensorEJECT buttonOPEN/CLOSE button PLAY buttonVCR/DVD mode selector buttonFF (Fast Forward) buttonSKIP 7 button (DVD mode)REW (Rewind) buttonSKIP 6 button (DVD mode)REC/OTR buttonAUDIO (L/R)/VIDEO IN jacks (LINE 1) 2C51801A (06-11) 18/07/2003, 10:468
9No. Display DescriptionWhen this unit and the TV are only connected by a coaxial cable, pressingthe TV/VCR button on the remote control makes this display appear.123456Display9101112VCRDVDCDPM10 : 0001 : 002C036L1ErrTRKRECCH02Playback (lights) / Auto resume (flashes)Still pictureDVD disc is inserted.CD is inserted.Display for afternoon (lights out in the morning)Clock display (colon[ : ] flashes)Counter display by hour/minute at VCR/DVD / by minute/second at CDTrack number display for CDTV channel display for VCRCATV channel displayExternal input displayError displayTimer recording displayVideo tape is in the unitTrack display for CDNormal recording display (flashes during One-touch Timer Recording - OTR)NOTE:Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.Display window71 2 3 47651011129 88Progressive scanning mode 2C51801A (06-11) 18/07/2003, 10:469
10Discs that can be playedRemote controlVCR/DVDSee pages 18~23, 25,27, 28, 30~32, 35~54POWERSee pages 18, 19, 360-9See pages 23, 28, 30,38, 41, 45, 47, 48DVD MENUSee pages 43, 45ENTERSee pages 18~23, 26, 31~33, 35, 36, 38~41, 43~54CH / See pages 28, 30RETURNSee page 35PLAYSee pages 25, 26, 36, 37, 40, 41, 43~45, 48STOPSee pages 25, 27, 29, 30, 36, 44, 45, 47INDEX/SKIP See pages 27, 37, 45AUDIOSee pages 33, 42CM SKIPSee page 26ANGLESee pages 43, 45COUNTER RESETSee page 27MARKERSee page 39PLAY MODESee pages 40, 41SPEEDSee pages 28, 30, 34PROG TIMERSee pages 31, 32JUMPSee page 38ZERO SEARCHSee page 27REC/OTRSee pages 28, 30EJECTSee page 24OPEN/CLOSESee pages 36, 44, 45, 48INPUTSee page 34 PROGRESSIVESee page 35TV/VCRSee pages 18, 29DISPLAYSee pages 26, 27, 29, 31, 38, 53SETUP VCR MENUSee pages 18~23, 26, 31~33, 35, 46, 47, 49~54ZOOMSee pages 38, 45REPEAT A-BSee page 40TRACKING +/– See page 26 SET +/–See pages 18~23, 26, 31~33PAUSE/STILLSee pages 26, 29, 37REW/FFSee pages 25, 26, 37SLOWSee pages 26, 37TITLESee pages 43, 45SUBTITLESee page 42AUTO TRACKINGSee page 26Only Panasonic TVs can be operated using this remote control.There may be some TV models that cannot be operated with this remote control. If this is the case, use the original remote control supplied with the TV.POWER buttonINPUT select buttonCH (Channel) / buttonsVOL (Volume) + / – buttonsSee pages 35, 36, 38~54CLOCK/COUNTERSee page 27CANCELSee pages 21, 31, 32, 38, 39, 41, 47TV control buttons Notes: 2C51801A (06-11) 18/07/2003, 10:4610
11Inserting Batteries123Remote control operations• Aim the remote control at the remote sensor and press control buttonsto operate.• Operate the remote control within 30° angle on either side of the remotesensor, up to a distance of Approx. 5 meters.Replace the compartmentcover.Install two “AAA” batteries payingattention to the polarity diagram inthe battery compartment.Open the battery compartmentcover.Approx. 5 meters(15 FEET)Battery precautionsThe precautions below should be followed when using batteries in this device:1.Use only the size and type of batteries specified.2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injuryfrom possible battery leakage.5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow batterymanufacturer’s directions.)TO USE AC POWER SOURCEUse the AC polarized line cord provided for operation on AC. Insertthe AC cord plug into a standard 120V 60Hz polarized AC outlet.NOTES:•Never connect the AC line cord plug to other than the specifiedvoltage (120V 60Hz). Use the attached power cord only.•If the polarized AC cord does not fit into a non-polarized ACoutlet, do not attempt to file or cut the blade. It is the user’sresponsibility to have an electrician replace the obsolete outlet.•If you cause a static discharge when touching the unit and theunit fails to function, simply unplug the unit from the AC outletand plug it back in. The unit should return to normal operation.Polarized AC Cord Plug(One blade is wider than the other.)AC OutletWider Holeand BladePower source 2C51801A (06-11) 18/07/2003, 10:4611
12OUT(TV)IN(ANT)OUT(TV)IN(ANT)OUT(TV)IN(ANT)NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect theantenna to the DVD/VCR properly.•For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use ofan outdoor type antenna is required.•If you are not sure about the connection, please refer to qualified service personnel.If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber, skipahead to page 14 for the proper connections.ANTENNA TO DVD/VCR CONNECTIONThe DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TVand connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connectingan antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connectiondiagram.If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300ohm inputs and one 75 ohm output.NOTE:Basic connectionsCombination VHF/UHF Antenna with 75 ohm Coaxial CableCombination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) WireSeparate VHF and UHF Antennas123DVD/VCRVHF UHF300 ohm Twin Lead (Flat) WireMatching Transformer 300 ohm Input75 ohm output(not supplied)300 ohm Twin Lead (Flat) Wire75 ohm Coaxial Cable75 ohm Coaxial CableCombiner75/300 ohm Inputs75 ohm output(not supplied)DVD/VCRDVD/VCR 2C51801A (12-15) 18/07/2003, 10:4612
13UHFVHFUHFVHFVHF/UHF INNOTE: If a VHF or UHF antenna isused, set the TV/CATVmenu option to the “TV”mode.NOTE: If a VHF or UHF antenna isused, set the TV/CATVmenu option to the “TV”mode.NOTE: If a VHF or UHF antenna isused, set the TV/CATVmenu option to the “TV”mode.75 ohm Coaxial Cable (supplied)Splitter75 ohm Input75/300 ohm outputs(not supplied)Splitter75 ohm Input300 ohm outputs(not supplied)TV with single 75 ohm VHF/UHFantenna inputTV with 300 ohm UHFand 75 ohm VHFantenna inputsTV with 300 ohm UHF and 300 ohm VHFantenna inputsDVD/VCR TO TV CONNECTIONAfter you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and followthe connection diagram.This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antennainputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.TVTVTV75 ohm Coaxial Cable(supplied)75 ohm Coaxial Cable(supplied) 2C51801A (12-15) 18/07/2003, 10:4613
14VHF/UHFIN (ANT)OUT(TV)IN(ANT)VHF/UHFIN (ANT)OUT(TV)IN(ANT)VHF/UHFIN (ANT)OUT(TV)IN(ANT)Many cable companies offer services permitting reception of extra channels including pay or subscription channels.This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cablecompany supplied converter box, except for those channels which are intentionally scrambled. If you subscribe toa special channel which is scrambled, you must have a descrambler box for proper reception.CATV (CABLE TV) connectionsNOTE: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCRto the output of the Converter/Descrambler box, usually channel 3 or 4.ALLOWS: *Recording of nonscrambled channels.*Use of the programmable timer.*Recording of one channel while watching another.ALLOWS: *Recording of channels through the converter box(scrambled and unscrambled).*Using the programmable timer to record only thechannel selected at the converter box.PREVENTS: *Recording one channel while watching another.*Using the DVD/VCR tuner to select channels.12DVD/VCRIncoming CableTVConverter/DescramblerIncomingCableTVIncoming Cable Converter/DescramblerTV3ALLOWS: *Recording of nonscrambled channels.*Use of the programmable timer.*Recording an unscrambled channel while watchingany channel selected at the converter box.PREVENTS: Recording scrambled channels.To record from converter/descrambler,DVD/VCR tuner must be tuned to theconverter output channel, usuallychannel 3 or 4.If you are playing a tape or using thetuner built into the DVD/VCR, theconverter must be set to the videochannel output of the DVD/VCR (either3 or 4).NOTE:NOTE:DVD/VCRDVD/VCR 2C51801A (12-15) 18/07/2003, 10:4614
15VHF/UHFIN (ANT)ABOUT(TV)IN(ANT)VHF/UHFIN (ANT)ABOUT(TV)IN(ANT)This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambledprograms, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consultyour local cable company for more information concerning connection to their descrambler equipment. There are manyways to connect your DVD/VCR to a cable system. Below are six common methods of connection.IMPORTANT: Make sure the TV/CATV menu option is set to the “CATV” mode.IncomingCable456ALLOWS: *Recording of one channel while watching another.*Using the programmable timer to record only the channel selected at the converter box.*Recording of all channels through the converter box.PREVENTS: *Watching scrambled channels while recording another channel.*Using the DVD/VCR tuner to select channels.DVD/VCRSplitterConverter/DescramblerTVDVD/VCRConverter/Descrambler A/B SwitchTVIncomingCableSplitterALLOWS: *Recording of nonscrambled channels.*Recording of one channel while watching another.*Watching premium channels through the converter while recording nonscrambled channels.*Using the programmable timer.PREVENTS: Recording scrambled channels.ALLOWS: *Recording of all channels through the converter box.*Recording a scrambled or unscrambled channel while watching another (scrambled orunscrambled) channel.*Using the programmable timer to record only the channel selected at the converter box.PREVENTS: Using the DVD/VCR tuner to select channels.DVD/VCRA/B SwitchSplitter TVIncomingCableConverter/DescramblerConverter/DescramblerA/B SwitchVHF/UHFIN (ANT)ABOUT(TV)IN(ANT) 2C51801A (12-15) 18/07/2003, 10:4615
16To Audio (R) InputTo Audio (L) InputTo VideoInputAudio (L) OutputAudio (R) OutputVideo OutputDVD/VCRTVAUDIO/VIDEO cable (not supplied)Connect to a TV with Audio/Video OutputYou can enjoy playback by connecting the unit to a TV.Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the audio/video cable (not supplied).Connect to a TV with S-Video Output (for DVD playback)If your TV has an S-VIDEO input, you can get higher quality by connecting it with the S-VIDEO output of the unitusing the S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit.DVD/VCRTVS-Video cable (not supplied)To Audio (R) InputTo Audio (L) InputS-Video OutputAUDIO cable (not supplied)Audio (L) OutputAudio (R) OutputThe exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependenton the model and features of each component. Check the Owner's Manual provided with each component for thelocation of video and audio inputs and outputs.S-VIDEO/COMPONENTVideo selector switchTo S-VideoInputConnect to a TV with Component Video Output (for DVD playback)You can enjoy high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENTVIDEO IN jacks of your TV with the COMPONENT video cables (not supplied).COMPONENT VIDEO cable (not supplied)TVDVD/VCRTo Component Video InputTo ComponentVideo OutputNOTES:• When you connect to a TV with S-video jack or component jacks, set the S-VIDEO/COMPONENT Video selectorswitch to the desired position. And also you must select the corresponding video input on your TV.• When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on thedisplay window is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals and you cannotsee any picture. To turn off the PROGRESSIVE indicator, make the Progressive scanning mode inactive (seepage 35).AUDIO cable (not supplied)Playback connectionsAudio (L) OutputAudio (R) OutputTo Audio (R) InputTo Audio (L) Input 2C51801A (16-21) 18/07/2003, 10:4616
17Connect to an AV Amplifier with built-in digital surroundIf you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systemssuch as Dolby Digital and DTS by using the Optical or Coaxial Digital Output.Use this connection to connect an:• AV amplifier with built-in *Dolby Digital decoder• AV amplifier with built-in *DTS decoderConnect to a Stereo Amplifier with Audio OutputYou can enjoy high quality audio by connecting the audio output to your amplifier.Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.NOTES:••••••The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT) are useful only forDVD section. The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/VHF OUT.When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AVAmplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing thespeakers to be damaged.Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital inputconnector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs maycause such a high level of noise that it may be harmful to your ears and damage your speakers.DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder isnecessary.When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.Video cable (not supplied) To VideoInputCoaxial digital cable (not supplied)AV Amplifier withbuilt-in variousdecoder as aboveDVD/VCRTVConnecting the optical digital cableYou may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital cable.When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.When not using the optical digital cable, attach the dust protection cap to protect against dust.NOTE:You may connect to a TV with aComponent video cable (not supplied)or S-Video cable (not supplied) insteadof a video cable (not supplied).To Audio (L) InputTo Audio (R) InputAUDIO cable (not supplied)Stereo AmplifierDVD/VCRAudio (R) OutputAudio (L) OutputCoaxial Digital Audio OutputVideo Output 2C51801A (16-21) 18/07/2003, 10:4617
18Setting the video channel / Setting the languageTo view playback of a recorded tape orDVD disc, or to watch a program selectedby the VCR's channel selector, the TV mustbe set to channel 3 or 4 (video channel).NOTES:•When shipped from factory, the videochannel is set to CH 3.•If the unit does not operate properly,or No key operation (by the unit and/or the remote control): Static electric-ity, etc., may affect the player's opera-tion. Disconnect the AC power cordonce, then connect it again.• Both the VCR and the DVD have theirown menu option (See page 35).• If no buttons are pressed for more than60 seconds, the MENU screen will re-turn to normal TV-operation automati-cally.You can choose from three different languages (English,French and Spanish) for the on-screen displays.When a TV is connected with the 75 ohm coaxial cable only.1Press and hold 3 or 4 on the remotecontrol for 3 seconds in the standbymode to select CH 3 or 4. The selectedchannel number will flash on the display for about 4 seconds.2Turn ON the TV and set to CH 3 or 4 to correspond with thechannel selected in step 1.5Press TV/VCR to select the VCR position.The VCR indicator will appear in the display.6Select any channel to receive a TV station in your area.The channel number will appear on the screen for about4 seconds.For a push-button TV tunerIf CH 3 or 4 corresponding to the video channel cannot be tunedon your TV, proceed as follows: set the VCR 3/4 channel selectorand the TV to CH 3 or 4, play back a prerecorded tape and tunethe TV to receive a sharp color picture from the video cassetterecorder. Refer to your TV owner's manual for details.Setting the video channelSetting the language3Press SET + or – to select thedesired language: English (EN-GLISH), Spanish (ESPAÑOL) orFrench (FRANCAIS), then pressENTER.12Press SET + or – to select the“LANGUAGE” option, then pressENTER.⟨+/-/ENTER/MENU⟩MENUTIMER REC SETAUTO REPEAT ON OFFON OFFSAPCH SETUPSYSTEM SETUP+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFF3Press POWER to turn on the DVD/VCR.4Press VCR/DVD to select the VCR mode. The VCR indicatoron the front panel will light.Press VCR MENU.The VCR menu screen will appear. Press SET + or – to selectthe “SYSTEM SETUP” menu, thenpress ENTER.If you use the unit for the first timeand press VCR MENU, instead ofthe main menu screen on the rightthe “SYSTEM SETUP” menuscreen in step 2 may appear.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)Preparation:••4Press VCR MENU until the MENU screen is cleared. 2C51801A (16-21) 18/07/2003, 10:4618
19Auto clock settingThe Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zoneand Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channelsignal.Press VCR MENU. The VCR menu screen will appear.Press SET + or – to select the “SYSTEM SETUP” menu, thenpress ENTER.2Press SET + or – to select the“STANDARD TIME” option, thenpress ENTER.You must set the antenna connection before the AC cord plug isinserted into the AC outlet.1Preparation:Auto clock settingWAIT 3 MINUTES! when the power switch is off, after theconnections of the antenna and the power plug. Because the AutoClock setting feature is activate.After the clock is set automatically, you may have to set the TimeZone and Daylight Saving Time.Press POWER to turn on the DVD/VCR after the Auto Clock operationcompleted.When shipped from factory, the “Auto Clock” option is set to “ON” position.If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.With cable box connection, if the Auto Clock Setting is unsuccessful,please select the PBS channel carrying the XDS information, thenturn the DVD/VCR off. After 3 minutes, turn the DVD/VCR on, and ifthe clock is not set automatically, set the clock manually. (See page 21)•••3Press SET + or – to select your Time Zone, then press the ENTER.ATLANTIC : GMT – 4 hours(GMT: Greenwich Mean Time)EASTERN : GMT – 5 hoursCENTRAL : GMT – 6 hoursMOUNTAIN: GMT – 7 hoursPACIFIC : GMT – 8 hoursALASKA : GMT – 9 hoursHAWAII : GMT – 10 hoursAUTO : AUTO SETTime Zone setting (STANDARD TIME)4Press VCR MENU until the MENU screen is cleared.In the rare event that you live within broadcast range of twostations in two different time zones, the DVD/VCR may recognizethe wrong station for the Auto Clock set. To correct the situation:When shipped from factory, the “TimeZone” option is set to “AUTO” position.After Auto Clock setting, in some casethe clock may display the other timezone’s. You can correct the clock byselecting your Time Zone settingabove.When the clock is not set or you setthe clock manually, Time Zone settingis not available.NOTES:•••+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFF+/-/ENTER/MENUSTANDARD TIMEATLANTIC EASTERNCENTRAL MOUNTAINPACIFIC ALASKAHAWAIIAUTO Preparation:•Turn ON the TV and set to the video input mode.•Press VCR/DVD to select the VCR mode. (The VCR indicator willlight.) 2C51801A (16-21) 18/07/2003, 10:4619
20Daylight Saving Time settingRepeat the step 1 on page 19 andpress SET + or – to select“DAYLIGHT SAVING TIME” option,then press ENTER.12Press SET + or – to select “ON”or “OFF”, then press ENTER.You can set the Daylight Saving Time “ON” or “OFF”.Preparation:•Turn ON the TV and set to the video input mode.•Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)When you want to set the Daylight Saving Time, on the firstSunday in April you set to “ON”, and on the last Sunday inOctober you set to “OFF”.forward one hourback one hourON:OFF:When shipped from factory, the “Daylight Saving Time” optionis set to “OFF” position.When the clock is not set, Daylight Saving Time setting is notavailable.When there is no Daylight Saving Time in your area, alwaysselect “OFF” position in step 2.•••NOTES:Auto clock setting (continued)+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFF+/-/ENTER/MENUDAYLIGHT SAVING TIMEONOFF 2C51801A (16-21) 18/07/2003, 10:4620
214Manual clock settingYou must set the date and time fortimer recordings and DaylightSaving Time if the Auto Clockprocess did not set them correctly.Press SET + or – to set themonth, then press ENTER.23Press SET + or – to select the“CLOCK SET” option, then pressENTER.After a power failure or disconnectionof the power, the timer settings will belost. In this case, reset the present time.NOTE:1Press VCR MENU. The VCR menu screen will appear.5Set the day, year and time as instep 4.6After setting the clock, date andtime starts functioningautomatically.To make corrections any time during the processPress CANCEL repeatedly until the item you want to changeblinks, then press SET + or –.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)Preparation:••⟨+/-/ENTER/MENU⟩MENUTIMER REC SETAUTO REPEAT ON OFFON OFFSAPCH SETUPSYSTEM SETUP+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFFEXAMPLE: Setting the clock to “8:30 AM” October, 29 (WED), 2003.8 : 30AM WEDPress SET + or – to select the“SYSTEM SETUP” menu, thenpress ENTER. 2C51801A (16-21) 18/07/2003, 10:4621
223Tuner settingThis DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down tothe next channel set into memory, skipping over unwanted channels. Before selecting channels, theymust be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATVmenu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.Press VCR MENU. The VCR menu screen will appear. PressSET + or – to select “CH SETUP”, then press ENTER.Then press ENTER to select theTV or CATV mode. The arrowindicates the selected mode.12Press SET + or – to select the“TV/CATV” option.4Press VCR MENU until the menu screen is cleared.TV - VHF/UHF channelsCATV - CABLE TV channels2Setting channels automaticallyThe VCR can receive a maximum of 181 channels bypresetting the channels into memory.Then press ENTER.The auto tuning will start. Thechannel display will count up andwhen finished, the screen returnsto normal.1Repeat above step 1 and pressSET + or – to select “AUTO CHMEMORY”.TV/CATV selectionTurn ON the TV and set to the video input mode.Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)Preparation:••+/-/ENTER/MENUCH SETUPTV CATVAUTO CH MEMORYADD/DELETE+/-/ENTER/MENUCH SETUPTV CATVAUTO CH MEMORYADD/DELETE⟨+/-/ENTER/MENU⟩CH SETUPTV CATVAUTO CH MEMORYADD/DELETECH 002NOTE:You can’t select “CH SETUP” if you setthe channel to “LINE 1” or “LINE 2”. 2C51801A (22-27) 18/07/2003, 10:4622
232To ADD/DELETE channels / Weak signal displayTo ADD/DELETE channelsYou can add the channels you want or delete the channelsyou do not want manually.Repeat the step 1 on page 22.Then press SET + or – to selectthe “ADD/DELETE” option andpress ENTER.Press Number keys or SET +or – to select a channelnumber you want to add ordelete.1To Add or Delete desired channels1To add channelsPress ENTER until “ADD”appears on the screen to setto add the unmemorizedchannel.To delete channelsPress ENTER until “DELETE” appears on the screen toset to delete the channel from memory. The channelnumber will blink.Repeat and to add or delete other channel.12323Press VCR MENU until the menu screen is cleared.Repeat the steps 1~2 on page 21 and press SET + or – toselect “WEAK SIGNAL DISPLAY” option.12Press ENTER to select the “ON”position.Weak signal displayWhen you don't want to receive a weak signal broadcast, theBlue back screen can be obtained by selecting the “WEAKSIGNAL DISPLAY” option “ON”. When the unit is shippedfrom the factory, the “WEAK SIGNAL DISPLAY” option is setto the “OFF”.3Press VCR MENU until the menu screen is cleared.⟨+/-/ENTER/MENU⟩CH SETUPTV CATVAUTO CH MEMORYADD/DELETE⟨+/-/0-9/ENTER/MENU⟩ADD CH 003+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFFPreparation:•Turn ON the TV and set to the video input mode.•Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.) 2C51801A (22-27) 18/07/2003, 10:4623
24Tape speed and maximum recording timeVideo cassette tapeTape SpeedSLP (Super Long Play)Loading and Unloading a cassette tapeTo prevent accidental erasureRemove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape.To record againErase prevention tabScrewdriverAdhesive tapeAutomatic tape ejectThis VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to itsbeginning, the cassette tape will be ejected automatically.Press EJECT on the unit or the Remote. Remove the cassette tape.LoadingPush the center of the tape until it is automaticallyinserted. Insert the cassette tape with its labeled side facing upand the erase prevention tab positioned at your left.An inverted cassette tape cannot be inserted.Erase prevention tabAutomatic playbackWhen loading a cassette tape without an erase prevention tab, playback will start automatically.Automatic power ONWhen you insert a cassette tape the VCR power will turn ON automatically.Unloading12Use only video cassette tapes marked .T-160 T-120 T-90 T-60 T-302-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hoursSP (Standard Play)VCR 2C51801A (22-27) 18/07/2003, 10:4624
25Cassette tape playbackPress PLAY.Playback will start.“ ” will appear on the screenfor about 4 seconds.To rewind the tape or forward it rapidlyPress STOP once.The tape will stop but remainfully loaded and ready to play.“ ” will appear on the screenfor about 4 seconds.Stop the playback or recording with STOP.To rewind the tape:Press REW.To forward the tape:Press FF .To stop the tape-winding, press STOP. To switch to playbackdirectly (without STOP), press PLAY.Forward/Reverse picture search modeWhen the tape is being winded, you can switch to picture searchmode (see next page). To do this, press REW or FF andhold it down. The unit will resume the tape winding as soon as thebutton is released.• This VCR selects the playback tapespeed SP, LP or SLP automatically.• The Cassette tape and DVD disc canbe played back simultaneously. If youpress VCR/DVD, the tape playbackand DVD playback alternate with eachother on the screen.NOTES:Preparation:•Turn ON the TV and set to the video input mode.•Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)•Load a prerecorded tape (When loading a cassette tape withoutthe erase prevention tab, playback will start automatically).To start playbackTo stop playback 2C51801A (22-27) 18/07/2003, 10:4625
26Adjusting tracking conditionSpecial playbackReverse picture search functionPress REW x 1 or x 2 during the playback.Forward picture search functionPress FF x 1 or x 2 during the playback.To return to playback: Press PLAY.Picture SearchStill PicturePress PAUSE/STILL during playback. To resume nor-mal playback: Press PLAY or PAUSE/STILL.Slow MotionDuring playback press SLOW .To return to playback: Press PLAY or SLOW .Press PAUSE/STILL during playback.Press SLOW one by one: The picture advancesframe by frame.To return to playback: Press PLAY or PAUSE/STILL.Frame by Frame pictureNOTES:•The audio output is muted during SPEED SEARCH,STILL, FRAME ADVANCE and SLOW MOTION.• During picture search mode there will be noise barswhich are caused by the system.• The Special Playback will automatically change toplayback after approx. 5 minutes to protect the videotape against excessive wear.Slow tracking and vertical lock adjustmentIf noise bars appear in the picture during slow motion,press the TRACKING + or – to reduce the noise bars.If the still picture jitters excessively, press TRACKING+ or – to stabilize the still picture.Automatic tracking adjustmentWhenever you insert a tape and start playback,automatic tracking starts working and continuouslyanalyzes the signal to enable optimum picture qualityduring playback.Manual tracking adjustmentIf automatic tracking cannot eliminate noises well duringplayback, press TRACKING +/– to eliminate the noises.“MANUAL TR.” will appear. Press it briefly for a fineadjustment, or press and hold for a coarse adjustment.• Press AUTO TRACKING to reactivate automatictracking again. “AUTO TR.” will appear.Repeat playbackThe entire video tape will be played until its end. Thetape will then automatically rewind to the beginning andthe playback will be repeated.1Press VCR MENU. Press SET + or – to select“AUTO REPEAT” option.3Press VCR MENU until the menu screen iscleared.if you press DISPLAY, “” will appear on thescreen.Then press ENTER toselect “ON” or “OFF”.If “ON” is selected, theplayback will berepeated endlessly.4To start the playback, press PLAY.The playback will be repeated endlessly.2To cancel repeat mode:Follow the above step 1, then press ENTER to selectthe “OFF” position. Press VCR MENU to return to theTV.⟨+/-/ENTER/MENU⟩MENUTIMER REC SETAUTO REPEAT ON OFFON OFFSAPCH SETUPSYSTEM SETUPSPEED SEARCH TIMESCommercial SkipPress CM SKIP during playback.The VCR will search forward through approximately30 seconds of the tape (e.g. unwanted commercial time)for each press of CM SKIP (maximum six presses) andthen resume normal playback.PICTURE SEARCH SPEEDPRESS TWICETAPE SPEED PRESS ONCESP (Standard Play)LP (Long Play)SLP (Super Long Play)5 X9 X15 X3 X7 X9 X 2C51801A (22-27) 18/07/2003, 10:4626
27+3Press DISPLAY.The counter display shows the taperunning time during playback orrecording.ZERO SEARCH function / Video index search systemZERO SEARCH functionThis function makes tape-rewinding stop at the counter 00:00:00position automatically.NOTES for Counter Display:If you rewind the tape beyond“00:00:00”, a minus sign (“–”) will bedisplayed in front of the time.When you load a tape, the counter willreset to “00:00:00”.The counter does not function onnonrecorded (blank) sections of thetape. When you rewind, fast forward orplay tapes through blank sections, thecounter stops.•••Press COUNTER RESET at the desiredtape position. The counter display will bereset to the “00:00:00” position (e.g. thebeginning of recording).2Press STOP when playback or recording is finished.Press ZERO SEARCH.The tape will be rewinded or fast forwarded and automaticallystop at the “00:00:00” position.The CLOCK/COUNTER-buttonPress CLOCK/COUNTER. The clock and tapecounter alternate with each other in the display.13Video index search systemThis function enables you to locate the beginning of any recordingmade on the VCR.Recording an INDEX MARKThe Index Search function automaticallyrecords an INDEX mark on the tapewhenever a recording is initiated.INDEX NO. (up to 9)or is displayedIndex SearchPress INDEX or during stop or playmode.For Succeeding programs: Press INDEX .For Preceding programs: Press INDEX .(Additional press increases the INDEX NO.up to 9.)When the INDEX or is pressed, theunit starts searching the INDEX NO.selected and finds the portion, then playbackstarts automatically.To stop the Index Search, press STOP.NOTES for Video index search system:When you record an INDEX mark at thevery beginning of the tape, the markmay not be found.During INDEX search, the tape maystop and begin to play at a slightlydifferent location.INDEX may not function properly withold or worn out video tapes.INDEX marks may not be found if it isextremely close to the point where thesearch began.In recording, if you stop recordingtemporarily, the INDEX mark is notrecorded on the tape.•••••Turn ON the TV and set it to the video input mode.Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)Preparation:••8 : 47AM MON00 : 04 : 38 SPHI-FI8 : 47AM MON00 : 00 : 00 SPHI-FIVCRVCRVCRVCRCH 001INDEX 2C51801A (22-27) 18/07/2003, 10:4627
283Recording a TV programLoad a cassette tape with the eraseprevention tab intact.The VCR will automatically turn on.Set the TV/CATV option to the appropriate position (See page22).12Press SPEED to select the desired tapespeed SP or SLP.The tape counter and SP or SLP willappear on the screen for about 4seconds.4TV - VHF/UHF channelsCATV - CABLE TV channelsRecording and viewing the sameTV program.Press Number keys or CH / to select the channel to berecorded.VHF/UHF/CATV CHANNELSTV CATVVHF2-13UHF14-69VHF2-13STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1)100-125 (100)(125) 01 (5A)5Press REC/OTR.“ ” will appear on the screen forabout 4 seconds and “REC” willappear on the display.NOTES:• If the erase prevention tab is removed,the tape will eject when REC/OTR ispressed for recording.• If you wish to watch the DVD playbackduring the normal recording on VCR,press VCR/DVD to change to DVDmode and perform the DVD playback(see page 36).• You can not record disc material inDVD, Audio CD, etc. onto a video tapewith this DVD/VCR.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)Preparation:••00 : 00 : 00 SPCH 110CH 110INDEX1-9 Press 0 twice and then 1-9 as required. Example: Toselect 2, Press “002”.10-12 Press 0 first and then the remaining 2 digits in orderfrom left to right.Example: Press 012 for “12”.13-99 Press 2 digits in order.Example: Press 22 for “22”.100-125 Press the 3 digits in order.Example: Press 110 for “110”. 2C51801A (28-33) 18/07/2003, 10:4628
29CH 1258 : 47AM MON00 : 00 : 00 SPSTEREO SAPPress STOP to stop recording.“ ” will appear on screen for about 4seconds.To stop recordingPress PAUSE/STILL to avoid recordingunwanted material.“” will appear on screen for about 4seconds.Press again to continue the recording.To stop recording temporarilyNOTES:The pause function will be released after 5 minutes to prevent damageto the tape or the VCR. The VCR will change to the STOP mode.You can select a recording channel in the recording pause mode.••Auto Rewind featureThis VCR will automatically rewind thetape when the tape has ended (exceptduring OTR and TIMER REC). It willalso eject the tape.While the VCR is recording, press TV/VCR to select the TV position.The “VCR” will go off and recording will continue.Select the TV channel you want to watch by using the TV channelselector.Recording one program while watching anotherNOTE:Some CATV hookups do not permit viewing one channel whilerecording another. See pages 14,15.To Display VCR operation StatusPress DISPLAY. The clock, day of the week and more information willbe indicated.To cancel the display: Press DISPLAY until all indicators disappear.While watching TV DAY OF THE WEEKCHANNELTAPE SPEEDREAL TIME COUNTERCLOCKSTEREO ANDSECOND AUDIOPROGRAM (SAP)While operating a tapeOPERATINGMODETAPE INAUTO REPEATHI-FI STEREO 2C51801A (28-33) 18/07/2003, 10:4629
303One-touch Timer Recording (OTR)Load a cassette tape with the eraseprevention tab intact.The VCR will automatically turn on.Set the TV/CATV option to the appropriate position (See page22).12Press SPEED to select the desired tapespeed SP or SLP.The tape counter and SP or SLP willappear on the screen for about 4seconds.4TV - VHF/UHF channelsCATV - CABLE TV channelsThe One-touch Timer Recordingfeature provides a simple andconvenient way to make a timedrecording.Press Number keys or CH / toselect the channel to be recorded.5NOTE:If you wish to watch the DVD playbackduring the OTR, press VCR/DVD tochange to DVD mode and perform theDVD playback (see page 36).Example: One-touch Timer Recording for 30 minutes.Press REC/OTR. Press the button again to stop recording after30 minutes. Each additional press of REC/OTR will increaserecording time as shown in the chart below, up to a maximum of6 hours. The OTR and recording time will appear on the screenfor about 4 seconds. And, REC will keep blinking in the display.Press STOP or turn off the power.“ ” will appear on screen for about 4seconds.To cancel OTRPressoncetwice3 times4 times5 timesNORMAL REC0:301:001:302:003:004:005:006:00NORMAL RECRecording time Press 6 times 7 times 8 times 9 times10 timesRecording timeTurn ON the TV and set to the video input mode.Press VCR/DVD to select the VCR mode. (The VCR indicatorwill light.)Preparation:••00 : 00 : 00 SPCH 110 2C51801A (28-33) 18/07/2003, 10:4630
313Timer recordingPress VCR MENU. Select the“TIMER REC SET” option , thenpress ENTER.Press SET + or – to select the date,then press ENTER.12Press SET + or – to select one of theprogram line, then press ENTER.4Press VCR/DVD to select the VCR mode.Load a cassette tape with the erase prevention tab intact.Press the DISPLAY button to verify that the time and date arecorrect (see page 29).Preparation:••Timer recording can be programmedon-screen with the remote control. Thebuilt-in timer allows automaticunattended recording of up to 8 pro-grams within 1 month.Set the start time, end time, channeland tape speed as in step 3.Example: Program a timer recording for the 26th day, channel 125(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed:SLP).NOTES:Press CANCEL to move cursor backwardfor correction.To record from external source set thechannel to “L1” or “L2”. “L1” or “L2” willappear next to CH 125 (or 69).••5To enter other programs, repeat step2 through 4.• To return to the normal screen,press VCR MENU twice.6Press and hold PROG TIMER for more than 1 second. Theclock symbol( ) will appear on the display and the VCR standsby for recording. At the same time, VCR mode will change toDVD mode automatically (“VCR” display remains on the displayeven if the VCR change to DVD mode). You can use DVD evenif the VCR is in the Timer recording mode. If you do not use theDVD, turn the power off.The timer recording will start at 5 seconds before the time youpredetermined.NOTES:If the clock symbol( ) does not appear on the display in spiteof the pressing of PROG TIMER, the cassette may not have beenloaded yet. (see page 24)If the cassette is ejected in spite of the pressing of PROG TIMER,the erase prevention tab of the cassette may have been re-moved. (see page 24)If there are other timer record programs remaining when the timerrecording ended, the VCR stands by for recording continuously.(VCR mode will change to DVD mode automatically.)•••NOTES:•If the clock symbol( ) blinks when thetimer recording ended, the TV programhas not been completely recorded becauseof an insufficient tape supply. Press andhold PROG TIMER for more than 1 secondto cancel the timer program or press EJECTto remove the cassette tape.•During timer recording standby mode, theVCR mode cannot be selected. To use theVCR, press and hold PROG TIMER formore than 1 second at first, then pressVCR/DVD to change to VCR mode. Afteryou use the VCR, press and hold PROGTIMER for more than 1 second again to putthe VCR into timer recording standby mode.•If you press and hold PROG TIMER formore than 1 second during timer record-ing, the recording operation will be inter-rupted. If you press and hold PROG TIMERfor more than 1 second again within theprogrammed time, the recording operationwill start again.•After a power failure or disconnection ofthe power plug, all programmed recordingsettings and time display will be lost uponresumption of power. In this case, reset theclock (see pages 19-21) and reprogramany timer recordings.+/-/ENTER/CANCEL/MENUDATE START END CH–+/-/ENTER/CANCEL/MENUDATE START END CH 26(SU)+/-/ENTER/CANCEL/MENUDATE START END CH26(SU)11:00PM11:30PM125SLP+/-/ENTER/CANCEL/MENUDATE START END CH26(SU)11:00PM11:30PM125SLP 2C51801A (28-33) 18/07/2003, 12:0231
32Timer recording (continued)Confirmation/Cancellation of theTimer recordingFollow the procedure of timer recording on the previouspage. At picture 3 press SET + or – repeatedly until thedesired setting appears. Then press ENTER.When you press SET – repeatedly, the indicator atDATE will change as follows, in this case the day isFriday.In case Timer programs-overlapDo not overlap timer programs as portions of theconflicting programs will be lost. The first recordingtime has priority over the next recording time asshown in the diagram below.•NOTES:The daily/weekly recording can be made continu-ously until the recording is canceled or the tapereaches the end.During timer recording the automatic rewindingmechanism does not function.••1If the Timer has been activated, press and holdPROG TIMER for more than 1 second to deactivatethe Timer. The clock symbol( ) will disappear.Then press VCR/DVD to change to VCR mode.2At picture 1 on theprevious page select the“TIMER REC SET”option and pressENTER.Then the timer programlist as right will appearon the screen.To cancel Timer program:4Press VCR MENU repeatedly until the TV-pictureappears.3The current day (Friday) SU-SA (Sunday to Saturday)MO-SA (Monday to Saturday)MO-FR (Monday to Friday)WKL-WE WKL-TH (Weekly Thursday)(Weekly Wednesday)One month laterminus one day8 : 00 11 : 009 : 00 10 : 00Program 1Prog.1Deleted PartsNon Recorded Portion PartsProg.2 Prog.3Program 2Program 3Recording Control SettingsPress SET + or – toselect the unnecessaryprogram, then pressCANCEL to cancel theprogram.To confirm Timer program:NOTES:• If there are other timer record programs remaining,PROG TIMER must be pressed to reactivate thetimer, otherwise the remaining timer record programswill be ignored.• You cannot confirm the Timer program during timerrecording operation.•You can also correct the programmed setting in programconfirm mode.At step 2 above, press ENTER to enter the programinput mode. Then press ENTER repeatedly until the+/-/ENTER/CANCEL/MENUDATE START END CH–+/–/ENTER/CANCEL/MENU DATE START END CH–––––– –:–– –:–– ––––––––– –:–– –:–– ––––––––– –:–– –:–– ––––––––– –:–– –:–– ––––––––– –:–– –:–– ––––––––– –:–– –:–– ––––––––– –:–– –:–– ––––––––––26(SU)11:00PM11:30PM125SLPitem you wish to correctblinks. Then correct the datawith SET + or –.Then press VCR MENU re-peatedly until the TV-pictureappears.Weekly (e.g. WKL-TU: each Tuesday)or daily (e.g. MO-SA: Monday to Sat-urday) Timer recording 2C51801A (28-33) 18/07/2003, 10:4632
33Stereo recording and playback / Second Audio Program (SAP)When a MTS STEREO broadcast isreceived, the word STEREO willappear on the screen and the programcan be viewed or recorded in stereo.The Hi-Fi STEREO recording procedureis the same as for normal recordings.The VHS Hi-Fi audio system permits high fidelity recording of MTSSTEREO TV broadcasts.NOTES:When playing back a tape that is notrecorded in Hi-Fi stereo mode, theaudio will automatically be monaural.When listening to a VHS Hi-Fi videotape or MTS broadcast through theVHF/UHF jack (Audio/Video cord notconnected), the sound will bemonaural.Stereo recording and playbackNOTE:When using a CATV system, stereo TV programs may be transmittedover a mono cable channel. In this case the word “STEREO” will notappear and the sound will be in mono.When viewing an MTS STEREO TV program, or playing a prerecordedVHS Hi-Fi STEREO videotape, press AUDIO to select how the audiowill be heard through the speakers. Normally set to the Hi-Fi STEREOposition, this button can be set to the MONO position if the stereobroadcast or videotape audio is of poor quality. The “R” and “L” posi-tions allow the audio from the Right or Left Hi-Fi channel to be heardover both TV speakers. This button has no effect when viewing aMONO videotape or TV program. Each time when you press the button,OUTPUT SELECTION display appears on the screen for severalseconds. Refer to the chart below.Output selectionOUTPUTSELECTIONSTEREOL chR chMONOSOUND HEARD ON BOTHSPEAKERSSTEREOLEFT CHANNEL AUDIORIGHT CHANNEL AUDIOMONOYour VCR is fitted with a SAP broadcast system which enablesyou to switch to a second audio program when viewing aselected channel.This function applies only when the program is broadcast inmulti-languages through the SAP broadcast system.Second Audio Program (SAP)Press VCR MENU. Then press SET + or – to select “SAP”.12Then press ENTER to select “ON”.Then press VCR MENU until themenu screen is cleared.When the VCR is turned on or a channel selection is made, makecertain the letters “SAP” appears on the screen. This means that the“Second Audio Program” broadcasting is available.Listening to SAPOR••STEREOSTEREO SAPSAP 2C51801A (28-33) 18/07/2003, 10:4633
34To AUDIO (L) INTo AUDIO (L) OUTAUDIO/VIDEO Cord (supplied)Playback VCRTo VIDEO OUT To AUDIO (R) OUTRecording VCRTo VIDEO INTo AUDIO (R) INIf you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.Make all connections before turning on the power.Duplicating a video tapeLoad a blank cassette tape with the erase preven-tion tab intact into the recording VCR.Load a previously recorded tape into the playbackVCR or CAMCORDER.1Press SPEED to select the desired tape speed SPor SLP.It is recommended that you set the Speed to theSP mode on the recording VCR for best results.2Press INPUT to select AUDIO/VIDEO input posi-tion. “L1” or “L2” will appear in the display.L1 (LINE 1) : on the rear panelL2 (LINE 2) : on the front panel3Press REC/OTR on the recording VCR, then pressPAUSE/STILL.4Press the PLAY button on the playback VCR orCAMCORDER, then press the PAUSE/STILL but-ton.5Release the recording pause and the playback stillsimultaneously to begin the duplicating process.6For duplicating a previously recorded tape from acamcorder, follow the camcorder manufacturer’sinstructions. A typical camcorder dubbing hookupis shown above.AUDIO/VIDEO Cord (not supplied)To AUDIO (R) INTo AUDIO (L) INTo VIDEO INRecording VCRTo AV JackPlayback CamcorderConnection with second Video recorder Connection with Video camera 2C51801A (34-38) 18/07/2003, 10:4634
35OSD Language English EnglishFrancaisEspanol/Enter/Setup/ReturnLanguage Picture Parental OtherSoundOSD Language English/Enter/Setup/ReturnLanguage Picture Parental OtherSound3Setting setup language/Progressive scan modePress or ENTER and thenpress or to select desiredlanguage (e.g. English), thenpress ENTER.1Press SETUP in the stop mode.The SETUP MENU of DVD willappear on the screen.Then press to select Other.NOTE: To make the SETUP screen disappear, press SETUP(or RETURN).If the DVD/VCR does not operateproperly: Static electricity, etc., mayaffect the player's operation. Disconnectthe AC power cord once, then connectit again.2Press or ENTER to selectOSD Language./Enter/Setup/ReturnLanguage Picture Parental OtherSoundNo DiscTurn ON the TV and set to thevideo input mode.Press VCR/DVD to select the DVDmode. (The DVD indicator will light.)“No Disc” will appear on the screen.(If a DVD disc has already loaded,the playback will start automatically.)Preparation:••Setting setup languageThe setup language can be selected.1Connect the COMPONENT VIDEO OUT jacks to the COM-PONENT VIDEO IN jacks of a TV (see page 16).Progressive scan modeThe unit supports the Progressive scan mode. If your TV is equippedwith component jacks which support the progressive video input, you canenjoy high quality picture by making the Progressive scan modeactive.2Press PROGRESSIVE in the stop mode. The PROGRES-SIVE indicator “ ” on the display window will lit, andprogressive scan signal is output from the COMPONENTVIDEO OUT jacks.3To make the Progressive scan mode inactive, press PRO-GRESSIVE in the stop mode. The PROGRESSIVE indicator“” on the display window will go off.NOTES:TV must have capability to accept and display a progressive scan signalto use Progressive scan mode. Consult your TV operating instructions.You cannot make the Progressive scan mode active in following case.- The unit is in the VCR mode.- The disc is played back in the DVD mode.- The S-VIDEO/COMPONENT video selector switch is setto S-VIDEO position.•• 2C51801A (34-38) 18/07/2003, 10:4635
364ReadingPlayback procedurePress PLAY or OPEN/CLOSE.The disc tray closes automati-cally.On the screen, changes to“Reading” and then playback willcommence.• A menu screen may appear onthe TV screen, if the disc hasa menu feature. In this case,press , , , orENTER to operate a menufeature.1Press OPEN/CLOSE.The disc tray will open.2Place a disc onto the tray.Hold the disc, position it with theprinted label side up, align it withthe guides, and place it in itsproper position.3Press STOP to end playback.• The DVD/VCR memorizes the stopped point, depending onthe disc. “ ” appears on the screen for approx. 4 seconds.“” keep blinking in the display until the playback is stoppedcompletely. Press PLAY to resume playback (from the scenepoint).• If you press STOP again(“ ” appears on the screen) or unloadthe disc, the DVD/VCR will clear the stopped point.5Then press OPEN/CLOSE.The disc tray opens.Remove the disc and press POWER.The disc tray closes automatically and DVD/VCR turns off.••NOTES:If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TVscreen according to the type of loaded disc. In this case, check your disc again (See pages 6 and 47).Some discs may take a minute or so to start playback.••••A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature youtried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicatea problem with the DVD/VCR.When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE,“Reading” will appear and remain on the screen for approx. 40 seconds and then it will change to “Incorrect Disc”.Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR playsDVDs according to the disc contents the software producers designed, some playback features may not beavailable. Also refer to the instructions supplied with the DVDs.When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoidpossible damage to the audio system, the consumer should take proper precautions when the analog stereooutputs of the DVD/VCR are connected to an amplification system.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:•• 2C51801A (34-38) 18/07/2003, 10:4636
37Special playbackPress FF during normal playback.Each press of FF will increase the speed of the search (x2),(x4), (x8), (x20).• To resume normal playback, press PLAY.Fast Forward PlaybackPress REW during normal playback.Each press of REW will increase the speed of the search (x2), (x4), (x8), (x20).• To resume normal playback, press PLAY.Review PlaybackPress PAUSE/STILL during normalplayback.Still PlaybackTo resume normal playback, pressPLAY.Press PAUSE/STILL during still play-back.One frame is advanced each timeyou press PAUSE/STILL.Frame Advance• To resume normal playback, press PLAY.• To resume the still playback, press PAUSE/STILL.Press SLOW(]) Forward or SLOW (^) Reverse duringnormal playback or still playback.Each press of SLOW will change the speed of the slow x1/2, x1/4,x1/6, x1/7.Slow-motion PlaybackTo resume normal playback, pressPLAY.Locating a chapter or trackThe unit is capable of holding a still videoimage or On screen display image on yourtelevision screen indefinitely. If you leavethe still video image or On screen displayimage displayed on your TV for an ex-tended period of time, you risk permanentdamage to your television screen. Projectiontelevisions are very susceptible.Press SKIP ( ) Forward or SKIP ( ) Reverse during play-back to locate a chapter that you want to watch.Each time you press the button, a chapter or track is skipped.NOTE:Note: There may be a slight delaybetween pressing the button and thefunction activation. Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:•• 2C51801A (34-38) 18/07/2003, 10:4637
381NOTE:You can use the Pause, Slow, Searchor Skip feature in the zoom mode.This unit will allow you to zoom in on the frame image. You canthen make selections by switching the position of the frame.In the zoom mode press ZOOM repeatedly to return to a 1:1view ( Off).1Press ZOOM during playback.The center part of the image willbe zoomed in.Each press of ZOOM will changethe ZOOM 1 (x 1.3), 2 (x1.5) and 3 (x 2.0).23ZoomingPress / or / to view a different part of the frame.You may move the frame from the center position to UP, DOWN,LEFT or RIGHT direction.Zooming/Locating desired sceneTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••Use the title, chapter and time recorded on the disc tolocate the desired point to play back.Press Number keys to change the number.• If you input a wrong number, press CANCEL.• Refer to the package supplied with the disc to check the numbers.1Press JUMP during playback orstop mode.3Locating desired scenePress ENTER.Playback starts.4• When you change the title, playback starts from Chapter 1 ofthe selected title.• Some discs may not work in the above operation.2Press or to select the “Time”, “Title” or “Chapter”.To check the title, chapter and time, press DISPLAY. (see page 53)Jump TimeTitleChapter/Enter/0 9/Cancel/Jump 2C51801A (34-38) 18/07/2003, 10:4638
39Marking desired scenes1Press MARKER duringplayback.2Select the blank Marker using/ .Then press ENTER at the desiredscene.• Repeat this procedure to setthe other 2 scenes.3Press MARKER to remove this display.The unit stores the points that youwant to watch again up to 3 points.You can resume playback fromeach scene.Marking the scenesTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••1Press MARKER during playbackor stop mode.Returning to the scenes2Press / to select the Marker1-3.3Press ENTER.Playback starts from the marked scene.NOTES:Some discs may not work with themarking operation.The marking is canceled when youopen the disc tray or turn the power off.Some subtitles recorded around themarker may fail to appear.•••1Press MARKER.To cancel the mark2Press / to select the Marker 1-3.3Press CANCEL.To remove this display, press MARKER.Marker 2Marker 1Marker 3/Enter/Cancel/MarkerMarker 2Marker 1Marker 3/Enter/Cancel/Marker2700 54Marker 2Marker 1Marker 3/Enter/Cancel/Marker271608542531000102Marker 2Marker 1Marker 3/Enter/Cancel/Marker271608542531000102 2C51801A (39-41) 18/07/2003, 10:4639
40RepeatPlay Mode OffAll::/Enter/Play ModeChapter:Repeat/Enter/Play ModeNOTES:Some discs may not work with therepeat operation.In A-B repeat mode, subtitles nearpoint A or B may not appear.During the A-B Repeat Playback theANGLE feature will not operate.You may not be able to set A-BRepeat, depending on the scenes ofthe DVD.A-B repeat does not work with aninteractive DVD and MP3/JPEG-CD.Repeat playbackPress PLAY to start Repeat playback.To resume normal playback, select Repeat Off.A-B repeat playback allows you to repeat material between twoselected points.1Press REPEAT A-B duringplayback.The start point is selected.2Press REPEAT A-B again.The end point is selected.Playback starts at the point thatyou selected. Playback stops atthe end point, returns to Point Aautomatically, then starts again.A-B Repeat PlaybackCD•••••2Press ENTER once or twice to select “Chapter” or “Title”.In case of CD, at first press to select “Repeat” and then pressENTER once or twice to select “Track” or “All”.DVDPlay Mode OffRepeat Off/Enter/Play Mode::/Enter/Play ModeCD1Press PLAY MODE during playback or stop mode.DVD3Press PLAY MODE again to make the screen disappear.••To resume normal playback press REPEAT A-B again.“Off” appears on the screen.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••Off:Repeat/Enter/Play ModeABATitle, Chapter, Track Playback 2C51801A (39-41) 18/07/2003, 10:4640
41RepeatPlay Mode:Random:Off/Enter/Play ModeProgram playback/Random playback (CD)1Press PLAY MODE in the stopmode.2Press ENTER repeatedly untilthe program table shown at rightappears.3Example: In case you wish toprogram in order of 7, 3, 11:Enter as 7 , 3 , 11.If you input a wrong number,press CANCEL.4Press / or / to select“Program Playback” and pressENTER. “Program Playback” willappear on the screen. Theprogram you selected will beginto playback in the order set.To return to normal playback, select“Play Mode: Off” at step 2 above.You can arrange the order of tracks on the disc.Program playbackPlay Mode OffRepeat Off/Enter/Play Mode::Program PlaybackTrack 7/1500:01 03:59Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••1Press PLAY MODE in the stopmode.Random playbackPlay Mode OffRepeat Off/Enter/Play Mode::2Press / to select “Random”.3Press PLAY.“Random Play” will appear on the screen and Random Playbackwill start.NOTES:To cancel program play, select“Clear” at step 4 and press ENTER.The program is cancelled when youopen the disc tray or turn the poweroff.Random playback can not becombined with Repeat playback.•••Repeat123456789101112Clear Program Playback Play Mode:Program:Off/Enter/0 9/Cancel/Play ModeClear Program Playback23 581131 1691217 4710Repeat:OffPlay Mode:Program/Enter/0 9/Cancel/Play Mode 2C51801A (39-41) 18/07/2003, 10:4641
42Changing soundtrack language / Subtitles / Karaoke playback1Press AUDIO during playback.The current soundtrack languagewill appear.2Press AUDIO repeatedly untilthe desired language is selected.The on-screen display will disap-pear after a few seconds.Changing soundtrack languageTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••Press SUBTITLE during playbackuntil “Off” appears.Turning the subtitles On and OffPress SUBTITLE repeatedly duringplayback until your desired languageappears.The on-screen display will disappearafter a few seconds.You can select the language when playing back a discrecorded with multi-lingual subtitles.Changing the subtitle languageWhen playing back a disc recorded with subtitles, you can turnthe subtitles on or off.You can select the language when you play a multilingual disc.1/8 Eng DolbyDigital2/8 Fra DolbyDigitalOff1/32 EngNOTES:• If the desired language is not heard afterpressing the AUDIO button several times,the language is not recorded on the disc.• Changing soundtrack or subtitle languageis cancelled when you open the disc tray.The initial default language or availablelanguage will be heard and seen if thedisc is played back again.• Depending on the DVD you may beunable to turn on, turn off, or change thesubtitles, even if they are recorded on thedisc. While playing the DVD, the subtitlemay change while opening or closing thedisc tray, or while changing the title.• In some cases, the subtitle language isnot changed to the selected one immediately.• The vocal output feature is used duringplayback of Dolby Digital (multi-channel)recorded DVD KARAOKE discs. Thisfeature allows you to turn off vocal audiotracks, or restore them for backgroundaccompaniment.• When playing KARAOKE, connectappropriate audio equipment such as anamplifier to the DVD/VCR.1Press AUDIO during DVDKARAOKE disc playback.Karaoke playbackWhen playing back a DVD KARAOKE disc, you can turn the vocal on or off.1/8 Eng DolbyDigitalOn2Press or to select “On” or “Off”.On: The primary vocal is output when it is recorded on the disc.Off: The primary vocal is not output. 2C51801A (42-43) 18/07/2003, 10:4742
43Changing angles / Title selection / DVD menuWhen playing back a disc recorded with multi-angle facility, youcan change the angle that you are viewing the scene from.1Press ANGLE during playback.The current angle will appear.2Press ANGLE repeatedly until the desired angle is selected.Changing AnglesTwo or more titles are recorded on some discs. If the title menuis recorded on the disc, you can select the desired title.Press ENTER or PLAY.The playback of the selected title will start.1Press TITLE during playback.Title menu appears on the screen.• Press TITLE again to resume playback at the scenewhen you pressed TITLE .2Press / or / to select the desired title.3Title SelectionSome DVDs allow you to select the disc contents using themenu.When you play back these DVDs, you can select the subtitlelanguage and soundtrack language,etc. using the DVD menu.Press ENTER.The menu continues to another screen. Repeat steps 2 and 3 toset the item completely.1Press DVD MENU during playback.The DVD menu appears on the screen.• Press DVD MENU again to resume playback atthe scene when you pressed DVD MENU.2Press / or / to select the desired item.3DVD MenuNOTE:Depending on the DVD, you may notbe able to change the angles even ifmulti-angles are recorded on the disc,or you may be unable to select the title,and a “title menu” may simply be calleda “menu” or “title” in the instructionssupplied with the disc.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••1/9 2C51801A (42-43) 18/07/2003, 10:4743
4443MP3/JPEG playbackThis unit can play back MP3/JPEG format CD-Ror CD-RW recorded for personal use on a PC, etc.Some discs may not play back due to thecondition of the recording.Limitations on MP3/JPEG CD playback•MP3/JPEG CD is the disc that is standardized byISO9660, its file name must include 3-digitsextension letters, “mp3” or “jpg”.• This unit can read 200 files per disc. If onedirectory has more than 200 files, it reads up to200 files, the remaining files will be omitted.• The unit is able to recognize up to a maximumof 50 directories per disc.• If the CD has both audio tracks and MP3/JPEGfiles, only audio tracks are played.• It may take more than one minute for this unit toread MP3/JPEG files depending on its structure.• The music files recorded by “Joliet RecordingSpecification” can be played back.• The music files recorded by “Hierarchical FileSystem” (HFS) cannot be played.• The unit can play back baseline and progressiveJPEG files.• Displayable muximum JPEG image size is 3800x 2800 pixels.A file menu screen will appear onthe TV screen.Press / to select folder.Press / or / or Number keys to select the desiredMP3 file.• In case the folder includes more than 15 files, press or to display next file list.Limitations on display• The maximum number for display is 16 letters.Available letters for display are the following:capital or small alphabets of A through Z,numbers of 0 through 9, and _ (under score).• Other letters than those above are replacedin hyphen.Notes on MP3/JPEG filesTo play back MP3/JPEG CD in the recorded order,1. Use MP3/JPEG software that records dataalphabetically or numerically.2. Name each file including two-digit or three-digitnumber (e.g. “01” “02” or “001” “002”).3. Refrain from making too many sub-folders.6Press STOP to end playback.• The unit records the stopped point. “ ” appears on the screen.Press PLAY to resume playback (from the scene point).• If you press STOP again or unload the disc, the unit will clearthe stopped point.1Press OPEN/CLOSE.The disc tray will open.Place a disc on which MP3 fileshave been recorded onto the tray.2Press OPEN/CLOSE or PLAY. Thedisc tray closes automatically. On theTV-screen, “Reading” will appear.Reading will take as much time asthe number of file.MP3/JPEG CD informationNOTES:During MP3/JPEG-Playback, you can not use SEARCH,A-B Repeat functions.You can use Repeat (Track or All), Random functions and Programplayback for MP3/JPEG CD Playback (see pages 40 and 41).••Turn ON the TV and set it to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicator willlight.)Preparation:••/0-9/Enter/Play Mode1-/722345JapanCD-RBay BridgeCLOSE MY EYESDIVE TO BLUEHoney89101112flowerLies and Truth-winter fallRainStrawberry6BLUE EYES13Welcome party7Blurry Eyes14ThailandPops--:--/0-9/Enter/Play Mode15-/7216MotherCD-RHold Your LastPops--:--MP3 CD playback1-/72--:--/0-9/Enter/Play Mode2345JapanCD-RBay BridgeCLOSE MY EYESDIVE TO BLUEHoney89101112flowerLies and Truth-winter fallRainStrawberry6BLUE EYES13Welcome party7Blurry Eyes14ThailandPops• When PLAY has been pressed after displaying the file menu,or when the disc tray has been closed after pressing PLAY instep 2, playback begins automatically starting from the firstfile. In this case, if the first file is an MP3 file, only MP3 filesare played back in order. If the first file is a JPEG file, the firstJPEG file is played back.Press ENTER.The selected file starts playing back.5About file menuOperationMedia typeFolderFile numberElapsed time: Indicates MP3 fileMedia type/0-9/Enter/Play Mode/DVD Menu/0-9/Enter/Play Mode/DVD Menu: Indicates JPEG file 2C51801A (44-52) 18/07/2003, 10:4744
452To display a picture menu, press DVDMENU. (To return to a file menu, pressTITLE.)Press / or / to select thedesired JPEG file.• To display next list, press SKIP /.• When PLAY has been pressed afterdisplaying the file menu, or when the disc tray has been closedafter pressing PLAY in step 2, playback begins automatically start-ing from the first file. In this case, if the first file is a JPEG file, thefirst JPEG file is played back. If the first file is an MP3 file, onlyMP3 files are played back in order.1Repeat the steps 1~3 on page 44.Turn ON the TV and set it to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicator will light.)Preparation:••JPEG playbackPress / or / or Numberkeys to select the desired JPEG file.4Press STOP to end playback.The file menu appears on the TVscreen. If you want to watch the otherfile, repeat steps 2-3.NOTE:The picture menu is displayed when theFUJICOLOR CD or the Kodak PictureCD are played. To display the file menupress TITLE.1-/362345Pic-1CD-RPic-2Pic-3Pic-4Pic-589101112Pic-8Pic-9Pic-10Pic-11Pic-126Pic-613Pic-137Pic-714Pic-14Collection/0-9/Enter/Play Mode/DVD Menu3Press ENTER.The selected picture appears on theTV screen.JPEG ZoomingThis unit will allow you to zoom in on the JPEG image.Press ZOOM during JPEG playback.Each press of ZOOM will change the ZOOM “ 1”, “ 2”,“3” and “ Off”.JPEG RotationYou can display JPEG images rotating at 90 degree intervals.Press ANGLE repeatedly during JPEG playback.Images are rotated 90 degrees clockwise.• Images are displayed at the same angle until the disc isremoved.3rdPress1stPress4th Press 2nd Press 2C51801A (44-52) 18/07/2003, 10:4745
46MP3/JPEG playback (continued)Press SETUP in the stop mode.Press or to select “Picture”,then press or ENTER.Turn ON the TV and set it to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicator will light.)Preparation:••Setting the JPEG Slide-showYou can continuously play back all JPEG files automatically asa slide-show./Enter/Setup/ReturnLanguage Picture Parental OtherSoundPress ENTER.Press or to select your desiredtime.123Press or to select “JPEGInterval”.To make SETUP screen disappear, press SETUP.4Off:Plays back one file at a time.5 Seconds:Plays back images in the form of a slide-show at 5 second intervals.10 Seconds:Plays back images in the form of a slide-show at 10 second intervals.15 Seconds:Plays back images in the form of a slide-show in 15 second intervals.Repeat the above step 1.Setting the display of file menuWhen playing back a CD containing a mixture of MP3 and JPEGfiles, only MP3 or JPEG files can be displayed on the file menu.1Press ENTER.Press or to select your desiredfile type.23Press or to select “Select Files”.All:Displays all files.Music Only:Displays only MP3 files.Pictures Only:Displays only JPEG files.To make SETUP screen disappear, press SETUP.4 2C51801A (44-52) 18/07/2003, 10:4746
47Parental control1Press SETUP in the stop mode.Press or to select “Parental”.Then press or ENTER.2Press once to select “Parental Off”, thenpress ENTER until the level you desireappears (e.g.: 1).3Press once to select “Password4Press ENTER.1234 change to .Parental control settingTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicator will light.)Preparation:••• If you input a wrong number, press CANCEL.• Be sure to remember this number!Some discs are specified not suitable forchildren. Such discs can be preventedfrom play back with the unit.”.Then press Number keys to input a 4-digitpassword (e.g.: 1234).PasswordParental1/Enter/Setup/Return12340 9/CancelLanguage Picture ParentalSound OtherPasswordParental1/Enter/Setup/ReturnLanguage Picture ParentalSound OtherPasswordParentalOff0 9/Cancel/Enter/Setup/ReturnLanguage Picture ParentalSound OtherPasswordParental1/Enter/Setup/Return0 9/CancelLanguage Picture ParentalSound Other5To make SETUP screen disappear, pressSETUP.1Select “Password ” (step 2) andpress Number keys to input your 4-digitpassword.Then press ENTER.To unlock the Parental control setting2PasswordParental1/Enter/Setup/Return0 9/Cancel1234Language Picture ParentalSound OtherCancel the password so as to set the Parental level freely again.NOTES:If each setup (page 46~54) has beencompleted, the unit can always beworked under the same conditions(especially with DVD discs).Each setup will be retained in thememory if you turn the power off.Depending on the discs, the unit can-not limit playback.Some discs may not be encoded withspecific rating level information thoughits disc jacket says “adult”. For thosediscs, the age restriction will not work.Do not forget the password. If you for-get the password, in the No Disc DVDmode, press and hold STOP on the unit,and simultaneously press and hold 7 onthe remote control for more than 3 sec-onds. “PASSWORD CLEAR” appearson the screen. The password has beencleared.The above procedure will clear the pass-word only.••••Level Off:The parental control setting does not function.(Factory preset)Level 1: LOCK ALL:Playback of all DVDs is prohibited. (Use to prohibit play ofmature theme DVDs not encoded with a rating level.)Level 2: DVDs expressly for children can be played back.Level 3 to 7:DVDs for general audiences/children can be played back.(DVDs with mature content are prohibited.)Level 8: NO LIMIT: All DVDs can be played back.Select from the level 1 to level 8. The limitation will be more severe asthe level number is lower.If the input password was right, will appear.You can move to “Parental 1”(e.g.) to inputthe desired level or to cancel parental control.PasswordParental1/Enter/Setup/Return0 9/CancelLanguage Picture ParentalSound Other47 2C51801A (44-52) 18/07/2003, 10:4747
48Temporary disabling of rating level by DVD discIf you wish to cancel the set rating level temporarily, select“Parental Control Level” with or , then press ENTER. Ifthe 4-digits password at step 3 on page 47 has been set, thepassword entering screen will appear as shown in step 4 below.Alternatively, if the password has not been set, playback willcommence. If you don’t know (or have forgotten) the password,select “Cancel Picture”.The setting screen will disappear. Press OPEN/CLOSE toremove the disc.1Load a DVD disc and press PLAYor OPEN/CLOSE (see page 36).2If the DVD disc has been designed to temporarily cancel theRating level, the screen which follows the “Reading” screen willchange, depending on which disc is played. If you select “YES”with ENTER key, “Your disc exceeds the parental control level1.”(e.g.) screen will then appear.3Enter the password withNumber buttons (0-9).Then press ENTER.4Playback will commence if the entered password was correct.5NOTE:This temporary cancellation of ratinglevel will be kept until the disc is ejected.When the disc is ejected, the originalrating level will be set againautomatically.Depending on the DVD disc, thedisc may try to temporarily cancelthe rating level that you have set.It is up to you to decide whether tocancel the rating level or not.If you interrupt the entering,press RETURN.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••ReadingYour disc exceedsthe parental control level 1.Parental Control LevelCancel Picture/Enter/ReturnPlease enter the4digit password9/Cancel/ReturnEnter/0 2C51801A (44-52) 18/07/2003, 10:4748
49MenuSubtitleAudioEnglishAutomaticEnglishEnglishFrancaisEspanolOther/Enter/Setup/ReturnLanguage Picture ParentalSound OtherSetting menu languagePress or ENTER.Press or to select yourdesired language, then pressENTER.123To make SETUP screen disappear, press SETUP.Other:Other languages can be selected (see the Language code liston page 55).English, Francais, Espanol:The selected language is the first-priority Menu language.Press or ENTER.Then press or to select“Menu”.4You can select the language of thedisc menu messages of DVDs. Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••Press SETUP in the stop mode.Press or to select “Lan-guage”./Enter/Setup/ReturnLanguage Picture ParentalSound OtherMenuSubtitleAudioEnglishAutomaticEnglish/Enter/Setup/ReturnLanguage Picture ParentalSound Other 2C51801A (44-52) 18/07/2003, 10:4749
50MenuSubtitleAudioEnglishAutomaticEnglish FrancaisEnglishEspanolOtherAutomaticOff/Enter/Setup/ReturnLanguage Picture ParentalSound OtherMenuSubtitleAudioEnglishAutomaticEnglish/Enter/Setup/ReturnLanguage Picture ParentalSound OtherIf you want to select another language, enter the language code(see the Language code list on page 55).Other:English, Francais, Espanol:The subtitle is displayed with the selected language if it isrecorded on the disc.Setting subtitle languagePress or ENTER.Press or to select yourdesired language, then pressENTER.1Press SETUP in the stop mode.Press or to select “Lan-guage”23To make SETUP screen disappear, press SETUP.4NOTE:If the selected language is not recordedon the disc, the first-priority language isselected.The same subtitle language canalways be selected even if you replacethe disc or turn the power off.Press or ENTER.Then press or to select“Subtitle”.• The unit will automatically select the same language in theAUDIO setting.•When the unit selects the same language as the AUDIO, thesubtitles will not appear during playback.•When you do not use the same language as the AUDIO, thesubtitles will appear during playback.Automatic:Subtitles do not appear.Off:Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••/Enter/Setup/ReturnLanguage Picture ParentalSound Other 2C51801A (44-52) 18/07/2003, 10:4750
51MenuSubtitleAudioEnglishAutomaticEnglish/Enter/Setup/ReturnLanguage Picture ParentalSound OtherSetting audio soundtrack languagePress or ENTER.Press or to select yourdesired Audio Language, thenpress ENTER.1Press SETUP in the stop mode.Press or to select “Language”23To make SETUP screen disappear, press SETUP.4NOTE:If the selected language is not recordedon the disc, the original language willbe heard.The same audio soundtrack languagecan always be selected by your uniteven if you replace the disc or turnthe power off.English, Francais, Espanol:The language you have selected will play if it is recorded onthe disc.Other:If you want to select another language,enter the language code (see the Language code list on page55).Original:The unit will select the first priority language of each disc.Press or ENTER.Then press or to select“Audio”.MenuSubtitleAudioEnglishAutomaticEnglish FrancaisEnglishEspanolOtherOriginal/Enter/Setup/ReturnLanguage Picture ParentalSound OtherTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••/Enter/Setup/ReturnLanguage Picture ParentalSound Other 2C51801A (44-52) 18/07/2003, 10:4751
52Tv ScreenOn4:3/Enter/Setup/ReturnLanguage Picture Parental OtherLanguage Picture ParentalSound OtherDisplay OffJPEG Interval AllSelect Files/Enter/Setup/ReturnLanguage Picture ParentalSound OtherSetting the aspect ratio of TV screenPress or ENTER.Press or to select yourdesired screen type, then pressENTER.1Press SETUP in the stop mode.Press or to select “Pic-ture”.23To make SETUP screen disappear, press SETUP.4NOTE:If the DVD disc is not formatted in the pan& scan style, it displays 4:3 style.You can select the aspect ratio foryour TV.4:3 Letter box:Select this mode when connecting to a conventional TV. Whenplaying back a wide screen-DVD disc, it displays the wide picturewith black bands at the top and bottom of screen.4:3 Pan Scan:It displays the wide picture on the whole screen with left andright edges automatically cut off.16:9 Wide:Select this mode when connecting to a wide-screen TV.A wide screen picture is displayed full size.Press or ENTER, then press or to select “Tv Screen”.You have the following screen sizes to choose from:Tv ScreenDisplay On4:3 4:316:94:3/Enter/Setup/ReturnLanguage Picture ParentalSound OtherOffJPEG Interval AllSelect FilesTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:•• 2C51801A (44-52) 18/07/2003, 10:4752
53Setting on screen display/Status display of discPress or ENTER to select “On”or “Off”.123To make SETUP screen disappear, press SETUP.4On: On screen displays appears when you press anybuttons (factory setting).Off: On screen displays do not appear when you press anybuttons except SETUP, SEARCH MODE, PLAY MODE,MARKER and DISPLAY.Press or ENTER, then press or to select “Display”.00:34:56 01:12:33Each press of DISPLAY, the status display of the disc will appear onthe screen and change as follows.DVDAUDIOCDStatus display of discTurn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVD indicatorwill light.)Preparation:••Press SETUP in the stop mode.Press or to select “Picture”.00:34:56 01:12:331/9Title 1/991/81/32Chapter 1/999Eng DolbyDigitalEng34:56 71:33Track 11/99To make status display disappear, press DISPLAY again./Enter/Setup/ReturnLanguage Picture ParentalSound OtherTv ScreenDisplay Off4:3/Enter/Setup/ReturnLanguage Picture Parental OtherLanguage Picture ParentalSound OtherOffJPEG Interval AllSelect FilesTv ScreenDisplay On4:3/Enter/Setup/ReturnLanguage Picture Parental OtherLanguage Picture ParentalSound OtherOffJPEG Interval AllSelect FilesWhen you playback the CD disc, the status display willappear on the screen and continue displaying.Setting on screen displayOn screen display can be switched on or off when you pressthe DISPLAY button. 2C51801A (53-BACK) 18/07/2003, 10:4753
54/Enter/Setup/ReturnLanguage Picture ParentalSound OtherDRCStd/Enter/Setup/ReturnLanguage Picture ParentalSound Other/Enter/Setup/ReturnLanguage Picture ParentalSound OtherDRCMaxStdMinStdDynamic Range ControlPress or ENTER, thenpress or to selectdesired setting.1Press SETUP in the stopmode.Press or to select“Sound”.23DRC (Dynamic Range Control) ena-bles you to control the dynamic rangeso as to achieve a suitable sound foryour equipment.Max: Full dynamic range is increased.Std: Full dynamic range is maintained.Min: Dynamic range is reduced.Press or ENTER to se-lect “DRC”.NOTES:• This function works only during playbackof Dolby Digital recorded discs.• The level of Dynamic Range Reduction maydiffer depending on DVD video disc.Turn ON the TV and set to the video input mode.Press VCR/DVD to select the DVD mode. (The DVDindicator will light.)Preparation:•• 2C51801A (53-BACK) 18/07/2003, 10:4754
55Language code listEnter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (see pages49-51).Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925Amharic 1123 Galician 1722 Malay 2329 Spanish 1529Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931Armenian 1835 German 1415 Maltese 2330 Swahili 2933Assamese 1129 Greek 1522 Maori 2319 Swedish 2932Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022Azerbaijani 1136 Guarani 1724 Moldavian 2325 Tajik 3017Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019Bulgarian 1217 Indonesian 1924 Pashto, Pushto 2629 Tonga 3025Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033Catalan 1311 Japanese 2011 Quechua 2731 Ukrainian 3121Chinese 3618 Javanese 2033Rhaeto-Romance2823 Urdu 3128Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219Czech 1329 Kazakh 2121 Samoan 2923 Volapük 3225Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525Faroese 1625 Latvian, Lettish 2232 Sindhi 2914 Zulu 3631Language Name Code Language Name CodeLanguage Name CodeLanguage Name Code 2C51801A (53-BACK) 18/07/2003, 10:4755
56SYMPTOMS POSSIBLE SOLUTIONS•Make sure the power cord is plugged in.•Try another AC outlet.•Power is off, check fuse or circuit breaker.•Unplug unit, then plug it back in.•Select the DVD or VCR mode before operating.DVD/VCR does not operate.Problems and troubleshootingUse the following check list for troubleshooting when you have problems with your unit. Consult your localdealer or service outlet if problems persist.Be sure all connections are properly made when using with other units.DVD/VCRPAGE11––1118,35The remote control does notfunction.• Aim at the remote control at the remote sensor.• Operate within Approx. 5 Meters or reduce the light in the room.• Clear the path of the beam.• The batteries are weak. Replace the batteries.• Check the batteries are inserted correctly.11DVDNo picture.• Antenna connection is not correct or antenna cable is disconnected.• The video channel is not in the correct position or the TV is notset to the video channel 3 or 4.• Check the unit is connected correctly.• The video input selector of the TV is not set to VIDEO. Set toVIDEO (or equivalent).• Channel is set to the external mode.No sound.• Check the unit is connected correctly.• Check the input selector of the amplifier is set properly.• The unit is in the Special playback mode.12~151812~17––12~17–26,37•Select proper language in the menu options.Display is not shown in yourlanguage. 35Playback doesn’t start. • No disc is inserted.• The disc may be dirty. Clean up the disc.• The unit cannot play DVD-ROMs, etc.Stopping playback, search, slow-motion play, repeat play, orprogram play, etc. cannot beperformed.• Some discs may not do some of the functions.3666–No CATV reception. •Check all CATV connections.•Station or CATV system problems, try another station. 14,15Noise bars on screen.• Tracking adjustment beyond range of automatic tracking circuit.Try Manual tracking adjustment.• Video heads are dirty.• The tape is worn or damaged.VCR•The erase prevention tab of the video cassette is broken off.•The unit is in the external input mode.TV recording does not work. 24,28Timer recording does not work. • The time is not set correctly.• The recording start/end time is not set correctly.• PROG TIMER has not been pressed ( is not lit).19~2131312657– 2C51801A (53-BACK) 18/07/2003, 10:4756
57No subtitle. • Some discs have no subtitles.• Subtitles are cleared. Press SUBTITLE.Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.• The function is prohibited with the unit or the disc. appears on the screen.4243–SYMPTOMS POSSIBLE SOLUTIONS PAGENOTES: •DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THEREAR COVER.•Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.•To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.The video heads are the means by which the DVD/VCR readsthe picture from the tape during playback. In the unlikely eventthat the heads become dirty enough to be clogged, no picturewill be played back. This can easily be determined if, duringplayback of a known good tape, there is good sound, but nopicture (picture is extremely snowy). If this is the case, havethe DVD/VCR checked by qualified service personnel. Good Picture Snowy PictureNo 4:3 (16:9) picture. • The setup does not match your TV.No on-screen display. • Select Display On.5253No surround sound. • The setup does not match your stereo system.The unit or remote operation keyis not functioning. • Turn off the unit and unplug the AC power cord for severalminutes, then replug it.17Playback does not start when thetitle is selected. • Check the Parental setup.Audio soundtrack and/or subtitlelanguage is not changed whenyou play back a DVD. • Multilingual language is not recorded on the DVD disc.–4750,51No picture, or the screen is blurredor divided into two parts.• The S-VIDEO/COMPONENT selector is not set correctly.• The progressive scanning mode is active through the unit isconnected to a TV via the VIDEO OUT jack.1635If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistanceat 1-800-211-PANA(7262).To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to :consumerproducts@panasonic.com.Video head cleaningA clean video head helps produce a clear picture.So, we have equipped your DVD/VCR with a built-in, non-chemical head cleaning system that helps preventclogging of the video heads. Cleaning is performed each time you load or unload a video cassette.• This feature is preventative only, If your video heads are seriously clogged, consider the use of a chemicalnon-abrasive head cleaning kit or take your DVD/VCR to a Servicenter.Built-in head cleaner (Model PV-744S only) 2C51801A (53-BACK) 18/07/2003, 10:4757
58AC 120V 60HzOperation: 18WStand by: 2W3.6 kg (7.9 lbs)Width : 430 mm (16-15/16 inches)Height: 99 mm (3-7/8 inches)Depth : 250 mm (9-13/16 inches)In: 1Vp-p/75 ohmOut: 1Vp-p/75 ohmIn: –8dBm/50k ohmOut: –8dBm/1k ohmUHF/VHF IN/OUT: 75 ohm coaxial20Hz to 20,000HzMore than 90dB4 Rotary HeadsHi-Fi Sound - 2 Tracks / MONO Sound - 1 Track181 Channel Freq. SynthesizedVHF 2-13UHF 14-69CATV 14-36 (A)-(W)37-59 (AA)-(WW)60-85 (AAA)-(ZZZ)86-94 (86)-(94)95-99 (A-5)-(A-1)100-125 (100)-(125)01 (5A)Channel 3 or 4, SwitchableApprox. 1minute and 48 seconds (with T-120 Cassette Tape)(at+25˚C)NTSCDVD (12cm, 8cm), CD (12cm, 8cm)DVD: 4Hz - 22kHzCD: 4Hz - 20kHz90dB0.02%Less than 0.01% WrmsMore than 90dBVideo : (RCA) 1 Vp-p/75 ohmAudio : (RCA) –12 dBm/1k ohmDigital Audio : 0.5Vp-p/75 ohmCD : Wavelength: 775 - 805 nmMaximum output power: 0.5 mWDVD : Wavelength: 640 - 660 nmMaximum output power: 1.0 mWSpecificationsGENERALPower supply:Power consumption:Weight:Dimensions:Inputs/Outputs:Video:Audio:Antenna:Hi-Fi frequency response:Hi-Fi dynamic range:VCR sectionVideo head:Audio track:Tuner:RF channel output:F.FWD/REW Time:DVD sectionSignal system:Applicable disc:Audio characteristicsfrequency response:S/N Ratio:Harmonic distortion:Wow and flutter:Dynamic range:Output:Pickup: 2C51801A (53-BACK) 18/07/2003, 10:4758
59OUT(TV)IN(ANT)VHF/UHF INSpanish Quick Use Guide (Guía para rapida consulta)Conexiones de TV cable (CATV)El DVD/VCR debe conectarse “entre” la antena y el televisor. Primero, desconecte la antena del televisor yconéctela al DVD/VCR. Luego, conecte el DVD/VCR al televisor.Una vez que haya conectado la antena al DVD/VCR, usted tendrá que conectar el DVD/VCR al televisor.Conexiones basicosDVD/VCRTVInterruptorA/BDivisorConvertidor/DecodificadorCableentranteMuchas compañías de TV cable ofrecen servicios que permiten recibir canales adicionales, incluyendocanales pagados o por suscripción. Al tener una gama de sintonización ampliada, este DVD/VCR puedesintonizar la mayoría de los canales de TV cable sin necesidad de usar un caja convertidora proporcionada porla compañía de TV cable, salvo aquellos canales que han sido intencionalmente codificados.DVD/VCRTVCable coaxial de 75 ohmios Cable coaxial de 75 ohmios(suministradas)1Mantenga presionado 3 o 4en el control remote durante3 segundos en el modoespera para seleccionar CH 3 o 4. El número delcanal seleccionado parpadeará en la pantalla durante4 segundos.2Encienda el televisor y ajústelo al canal 3 ó 4, encorrespondencia con el canal seleccionado en elpaso 1.3Presione el botón POWER para encender el DVD/VCR.4Presione VCR/DVD para seleccionar el modo VCR.El indicador VCR del panel frontal se iluminará.5Presione el botón selector TV/VCR paraseleccionar la posición VCR. El indicador VCR seiluminará.6Presione el botón selector de canal en ▲ ó ▼ (CH▲/▼) para recibir una estación de TV de su área.El número de canal aparecerá en la pantalladurante unos 4 segundos.Ajuste del canal de videoPara vizualizar la reproducción de una cintagrabada, o para ver un programa seleccionado porel selector de canal del videograbador, el televisordeberá estar ajustado al canal 3 ó 4 (canal de video).Cuando se conecta el TV sólo con un cable de antena. 2C51801A (53-BACK) 18/07/2003, 10:4759
60Spanish Quick Use Guide (Guía para rapida consulta)Ajuste del reloj automatico4Presione el botón SET+ ó – para establecer elmes, y a continuaciónpresione el botón EN-TER.5Ajuste el día, año y horade acuerdo con elprocedimiento del paso4.6Una vez ajustado elreloj, la fecha y la horaempiezan a funcionarautomáticamente.1Repita el paso 1 anteriory presione el botón SET +ó – para seleccionar laopción AUTO CHMEMORY.2Luego presione el botónENTER.Empieza la sintonizaciónautomática. La indicaciónde canal irá subiendo ycuando termina, la pantallavuelve a su estado normal.+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFFAjuste automático de los canalesESPERE 30 MINUTOS cuando esté desconectado elinterruptor, despues de la conexión de la antena y delcable de alimentación, ya que la función Auto Clock estáactiva.Después del ajuste automático del reloj, puede quetenga que ajustar la Zona horaria y la Hora de verano.Pulse POWER para encender el DVD/VCR despuésde completarse la operación de ajuste automático del reloj.1Presione el botón VCR MENU.Aparece la pantalla del menú de la VCR. Presioneel botón SET + ó – para seleccionar la optionSYSTEM SETUP, luego presione el botón ENTER.Si utiliza la unidad porprimera vez y presionaVCR MENU, es posibleque aparezca la pantallade menú SYSTEMSETUP del paso 2 enlugar de la pantalla delmenú principal.2Presione el botón SET+ ó – para seleccionarel modo LANGUAGE,luego presione el botónENTER.3Presione el botón SET+ ó – para seleccionarel idioma deseada: inglés(ENGLISH), español(ESPAÑOL) o francés(FRANCAIS), luegopresione el botón ENTER.4Presione el botón VCR MENU para volver a laimagen normal de TV.⟨+/-/ENTER/MENU⟩MENUTIMER REC SETAUTO REPEAT ON OFFON OFFSAPCH SETUPSYSTEM SETUPSeleccion de idioma en pantalla8 : 30AM WED1Presione el botón VCR MENU. Aparece la pantalla del menúde la VCR. Presione el botón SET + ó – para seleccionarla opción CH SETUP, luego presione el botón ENTER.2Presione el botón SET+ ó – para seleccionarel modo TV/CATV.3Presione el botón EN-TER para seleccionar elmodo TV o CATV. Laflecha indica el modoseleccionado.4Presione el botón VCR MENU dos veces para volvera la imagen normal de TV.SELECCION DE TV/CATVTV - Canales de VHF/UHFCATV - Canales de TV CABLE1Presione el botón VCRMENU. Aparece lapantalla del menú de laVCR.2Presione el botón SET +ó – para seleccionar laoption SYSTEM SETUP,luego presione el botónENTER.3Presione el botón SET +ó – para seleccionar laopción CLOCK SET,luego presione el botónENTER.Ajuste del reloj manual⟨+/-/ENTER/MENU⟩MENUTIMER REC SETAUTO REPEAT ON OFFON OFFSAPCH SETUPSYSTEM SETUP+/-/ENTER/MENUSYSTEM SETUPCLOCK SETLANGUAGE/IDIOMA/LANGUEWEAK SIGNAL DISPLAYAUTO CLOCKSTANDARD TIMEDAYLIGHT SAVING TIMEON OFFON OFF+/-/ENTER/MENUCH SETUPTV CATVAUTO CH MEMORYADD/DELETECH 002EJEMPLO: Ajuste del reloj a miércoles, 8:30 AM 29(MIE) octubre, 2003.+/-/ENTER/MENUCH SETUPTV CATVAUTO CH MEMORYADD/DELETE+/-/ENTER/MENUCH SETUPTV CATVAUTO CH MEMORYADD/DELETE 2C51801A (53-BACK) 18/07/2003, 10:4760
61Grabacion de un programa de TVSpanish Quick Use Guide (Guía para rapida consulta)Presione el butón PAUSE/STILL para evitar grabarmaterial no deseado.“” aparecerá en pantalladurante 4 segundosaproximadamente.Presione nuevamente paracontinuar la grabacion.PARA DETENER TEMPORALMENTELA GRABACIONDetenga la reproducción o la grabación mediante STOP.PARA REBOBINAR O AVANZAR LACINTA RAPIDAMENTEPara rebobinar la cinta:Presione REW.Para avanzar la cintaPresione FF .Para detener el bobinado de la cinta, presione STOP.Para pasar directamente a reproducción (sin presionarSTOP), presione PLAY.Modo de búsqueda de imagen hacia delante/atrásMientras se bobina la cinta, puede pasar al modo debúsqueda de imagen (ver página siguiente). Para ello,presione REW o FF y manténgalo presionado.La unidad volverá a bobinar la cinta en cuanto se suelteel botón.Presione en el centro del videocassette hasta que seretraiga automáticamente.COLOCACIONPresione el botón STOP(PARADA) una vez. La cintaparará, pero permanecerácargada y lista parareproducir.“ ” aparecerá en pantalladurante 4 segundosaproximadamente.PARA INTERRUMPIR REPRODUCCIONPresione el botón EJECTdel DVD/VCR o cotrolremoto.Extraiga el videocassette.EXTRACCIONPresione el botón PLAY. Lareproducción comenzará.“” aparecerá en pantalladurante 4 segundosaproximadamente.PARA INICIAR LA REPRODUCCION1Coloque un cassette enel cual la lengüeta deprotección contraborrados accidentalesesté intacta. El DVD/VCR se encenderáautomáticamente.2Presione el botón selectorSPEED para seleccionarla velocidad de cintadeseada SP o SLP.El contador y SP oSLP se aparecerá en lapantalla durante 4segundos aproximadamente.3Ajuste la opción TV/CATV en la posición apropiada.4Presione los botones deselección directa de ca-nal para seleccionar elcanal o CH / agrabar.5Presione el botón REC/OTR.“ ” aparecerá en lapantalla durante 4 segundosaproximadamente. Elindicador RECaparecerá en pantalla.00 : 00 : 00 SPTV - Canales de VHF/UHFCATV - Canales de TV CABLECH 110CH 110INDEXPresione el botón deparada STOP para detenerla grabacion.“ ” aparecerá en pantalladurante 4 segundosaproximadamente.PARA DETENER LA GRABACION 2C51801A (53-BACK) 18/07/2003, 10:4761
62Spanish Quick Use Guide (Guía para rapida consulta)1Presione el botón deVCR MENU.Seleccione la opciónTIMER REC SET ypresione el botón EN-TER.2Presione el botón SET+ o – para seleccionarel N° de programa,luego presione el botónENTER.3Presione el botón SET+ o – para seleccionarla fecha deseada, luegopresione el botón EN-TER.4Ajuste el tiempo de partida,tiempo de término, canaly velocidad de cintacomo en paso 3.NOTAS:•Presione el botón CANCELpara mover el cursolhacia atrás para haceruna corrección.• Para grabar de unafuente externa, ajuste elcanal a “L1” o “L2”. “L1”o “L2”aparecerá al ladodel canal 125 (o 69).5Para fijar otros programas,repita los pasos 2 al 4para fija el otro programas.•Para volver a lapantalla normal,presione dos vecesVCR MENU.6Presione y mantenga PROG TIMER durante masde 1 segundo. El símbolo de reloj ( ) aparecerá enel visualizador y el VCR quedará en modo de esperapara grabación. Al mismo tiempo, el modo VCRcambiará automáticamente a modo DVD. Es posibleutilizar el DVD incluso cuando el VCR está en modode grabación por temporizador. Si no utiliza el DVD,apáguelo.La grabación por temporizador se iniciará 20segundos antes de la hora predeterminada.Grabacion por temporizadorEJEMPLO: Programe una grabación con temporizadorpara el día 26, canal 125 (CATV), 11:00 - 11:30 hrs. PMen el programa de temporización número 1(VELOCIDAD DE CINTA: SLP).00 : 00 : 00 SPCH 110Grebacion por temporizador de unsolo toque (OTR)TV - Canales de VHF/UHFCATV - Canales de TV CABLEEJEMPLO: Una grabación por temporizador de un solotoque para 30 minutos.+/-/ENTER/MENUMENUTIMER REC SETAUTO REPEAT ON OFFON OFFSAPCH SETUPSYSTEM SETUP+/-/ENTER/CANCEL/MENUDATE START END CH–+/-/ENTER/CANCEL/MENUDATE START END CH 26(SU)+/-/ENTER/CANCEL/MENUDATE START END CH26(SU)11:00PM11:30PM125SLP+/-/ENTER/CANCEL/MENUDATE START END CH26(SU)11:00PM11:30PM125SLPPara cancelar OTRPresione el botón STOP(PARADA) para apagar laenergía.“ ■ ” aparecerá en pantalladurante 4 segundosaproximadamente.1Coloque un cassette conla lengüeta deprotección contraborrados accidentalesesté intacta. El DVD/VCR se encenderáautomáticamente.2Presione el botónSPEED para seleccionarla velocidad de la cintadeseada SP o SLP.El contador y SP o SLPaparecerán en pantalladurante 4 segundosaproximadamente.3Ajuste la opción TV/CATVen la posición apropiada.4Presione el botones deselección de canalesdirectos o botón CH / para seleccionar elcanal a ser grabado.5Presione el botón REC/OTR para comenzar lagrabación. Presione elbotón nuevamente paradetener la grabacióndespués de 30 minutos.Cada presión de elbotón REC/OTR aumentará el tiempo de grabacióntal como se muestra en el cuadro a continuación,hasta un máximo de 6 horas. OTR y el tiempo degrabación aparecerá en pantalla durante 4 segundos.Y REC seguirá parpadeando en el visualizador. 2C51801A (53-BACK) 18/07/2003, 10:4762
63Spanish Quick Use Guide (Guía para rapida consulta)Procedimiento de reproducción4Presione STOP para terminar la reproducción.• El aparato graba elpunto de parada, segúnel disco.Aparece “ ” en la pantalla.“” sigue parpadeandoen el visualizador hastaque se detenga porcompleto la reproducción.Presione PLAY paracontinuar reproduciendo(desde el mismo punto).•Si presiona nuevamenteSTOP o se retira el disco(Aparece “ ” en lapantalla), el aparato borraráel punto de parada.5A continuación presione OPEN/CLOSE.Se abre la bandeja del disco.Saque el disco y POWER. La bandeja del disco se cierraautomáticamente y se desconecta el aparato.00 : 00 : 00 SPPresione FF durante la reproducción normal.Cada vez que presione el botón de FF , aumentará lavelocidad de la búsqueda (x2), (x4), (x8), (x20).• Para seguir con la reproducción normal, presione PLAY.Reproducción con retroceso rápido1Presione OPEN/CLOSE.Se abrirá la bandejadel disco.Ajuste de la selección de idioma1Presione SETUP en elmodo de parada. ElMENÚ DE AJUSTE deDVD aparecerá enpantalla.Presione paraseleccionar other.2Presione o ENTERpara seleccionar OSDLanguage.3Presione o ENTERy presione o paraseleccionar el idiomadeseado (porejemploEnglish) y presione EN-TER.4Para que desaparezca la pantalla SETUP, presioneSETUP (o RETURN).OSD Language English EnglishFrancaisEspanol/Enter/Setup/ReturnLanguage Picture ParentalSound OtherOSD Language English/Enter/Setup/ReturnLanguage Picture ParentalSound Other/Enter/Setup/ReturnLanguage Picture ParentalSound OtherReading2Coloque un disco en la bandeja.Sujete el disco, colóquelo con ellado de etiqueta impresa haciaarriba, alinee en las guía y coloqueel disco en su posición correcta.3Presione PLAY u OPEN/CLOSE.La bandeja del disco se cierra automáticamente.En la pantalla del TV laindicación “ ” cambiaa “Reading” y empiezala reproducción.• Aparece la pantalladel menú en la pantallade TV, si el disco tieneuna función de menú.En este caso, presione, , , oENTER para activaruna función de menú.Reproducción con avance rápidoPresione REW durante la reproducción normal.Cada vez que presione el botón de REW, aumentarála velocidad de la búsqueda (x2), (x4), (x8), (x20).• Para seguir con la reproducción normal, presione PLAY.Reproducción FijaPresione PAUSE/STILL durante la reproducción normalpara hacer una pausa en la reproducción.Para seguir con la reproducción normal, presione PLAY.Avance cuadro por cuadroPresione PAUSE/STILL durante la imagen fija.Avanza un cuadro cuando presione PAUSE/STILL una vez.Para seguir con la reproducción normal, presione PLAY.Reproducción de cámara lentaPresione SLOW (^/]) durante la reproducción normalo cuadro a cuadro.Cada vez que presione SLOW, cambiará la velocidaddel slow x1/2, x1/4, x1/6, x1/7.• Para seguir con la reproducción normal, presione PLAY.• Para volver a la imagen fija, presione PAUSE/STILL.Búsqueda de un capítulo o canción o canciónPresione SKIP ( ) en avance o SKIP ( ) enretroceso durante la reproducción para buscar un capítuloque desea ver. Cada vez que presione el botón, se saltaun capítulo o canción. 2C51801A (53-BACK) 18/07/2003, 10:4763
64PANASONIC CONSUMER ELECTRONICS COMPANY,DIVISION OF MATSUSHITA ELECTRICCORPORATION OF AMERICAOne Panasonic WaySecaucus, New Jersey 07094PANASONIC SALES COMPANY,DIVISION OF MATSUSHITAELECTRIC OF PUERTO RICO, INC.,AVE. 65 de Infantería, Km. 9.5San Gabriel Industrial ParkCarolina, Puerto Rico 00985Panasonic DVD/VCR Deck Limited WarrantyLimited Warranty CoverageIf your product does not work properly because of a defect in materials or workmanship, PanasonicConsumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”)will, for the length of the period indicated on the chart below, which starts with the date of original purchase(“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b)replace it with a new or a refurbished product. The decision to repair or replace will be made by thewarrantor.During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” warrantyperiod, there will be no charge for parts. You must mail-in your product during the warranty period.If non-rechargeable batteries are included, they are not warranted. This Limited Warranty only applies toproducts purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extendedonly to the original purchaser and only covers product purchased as new. A purchase receipt or otherproof of original purchase date is required for Limited Warranty service.Mail-In ServiceFor assistance in the continental U.S.A. in obtaining repairs please ship the product to:Panasonic Services CompanyCustomer ServicenterSuite B4900 George McVay DriveMcAllen, TX 78503For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the originalcarton. Include a letter detailing the complaint and provide a day time phone number where you can bereached.IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BEREQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OFPURCHASE, AMOUNT PAID AND PLACE OF PURCHSE. CUSTOMER WILL BE CHARGED FOR THEREPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part NameDVD/VCR DeckRechargeable Batteries(in exchange for defective item)LaborNinety (90) DaysNot ApplicablePartsOne (1) YearTen (10) DaysLimited Warranty 2C51801A (53-BACK) 18/07/2003, 10:4764
65Limited Warranty Limits And ExclusionsThis Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOESNOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOTCOVER damages which occurred in shipment, or failures which are caused by products not suppliedby the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling,misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,improper maintenance, power line surge, lightning damage, modification, or commercial use (such ashotel, office, restaurant, or other business), rental use of the product, or service by anyone other thana Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTYCOVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIALDAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANYBREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of havingsomeone remove or re-install an installed unit if applicable, travel to and from the servicer, loss of ordamage to media or images, data or other recorded content. The items listed are not exclusive, butare for illustration only.)ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OFMERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, orlimitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights and you may also have other rights which varyfrom state to state. If a problem with this product develops during or after the Limited Warranty period,you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, thenwrite to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOURRESPONSIBILITY.Customer Services DirectoryCustomer Services DirectoryFor Product Information, Operating Assistance, Literature Request, Dealer Locations, andCustomer Service inquiries please visit Web Site:http://www.panasonic.comYou can purchase parts, accessories, locate your nearest servicenter and more by visiting our Web Siteor E-mail us via web:http://www.panasonic.com/consumer_electronics/support/customerfeedback.aspContact:1-800-211-PANA (7262),Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.Service in Puerto RicoMatsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter:Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985Phone (787)750-4300 Fax (787)768-29101-800-332-5368 (Customer Orders Only)1-800-237-9080 (Fax Only)(Monday-Friday 9 am-8 pm, EST.) Panasonic Services Company20421 84th Avenue South, Kent, WA 98032(Accepts Visa, MasterCard, Discover Card, American Express, and Personal Check)http://www.pasc.panasonic.com or email to parts@panasonic.comFor hearing or speech impaired TTY users, TTY : 1-877-833-8855As of May 2003Accessory PurchasesFor hearing or speech impaired TTY users, TTY : 1-866-605-1277Customer Services Directory 2C51801A (53-BACK) 18/07/2003, 10:4765
66AAccessory............................................................ 7Add/Delete Channels ........................................ 23Angle .................................................................43Aspect Ratio of TV Screen ................................ 52Audio CD ........................................................ 6,41Auto CH memory............................................... 22Auto Clock ......................................................... 19Auto Repeat ......................................................26Auto Rewind ...................................................... 29Automatic Playback........................................... 24Automatic Power On .........................................24Automatic Tape Eject ........................................24A-B Repeat Playback ........................................ 40BBattery ............................................................... 11CChapter ...............................................................6CH / ........................................................... 28Clock/Counter ...................................................27Commercial Skip ............................................... 26Condensation ......................................................5Connection ...................................................12-17Counter Reset ................................................... 27Customer Service Directory .............................. 65DDaylight Saving Time ........................................ 20Digital Audio Out ............................................... 17Disc Information .................................................. 6Display .........................................................29,53Duplicating a Video Tape ..................................34DVD Menu......................................................... 43Dynamic Range Control (DRC) .........................54EErase Prevention Tab ........................................ 24FFast Forward Playback ................................ 26,37Forward .............................................................25Frame advance ............................................ 26,37IImportant Safeguards.......................................... 3JJPEG ................................................................. 44Jump .................................................................38KKaraoke ............................................................. 42LLanguage ..................................18, 35, 49, 50, 51Language Code List ..........................................55Letter Box .......................................................... 52Limited Warranty ...............................................64Loading .............................................................24Locating a Chapter or Track .............................. 37MManual Clock Setting ........................................ 21Marker ...............................................................39MP3 ................................................................... 44OOne-touch Timer Recording (OTR) ................... 30PPan Scan........................................................... 52Parental Control ................................................47Parts and Functions ............................................ 8Picture Search................................................... 26Playback....................................................... 25,36Power Source.................................................... 11Problems and Troubleshooting ......................... 56Program Playback ............................................. 41Progressive Scan .............................................. 35RRandom Playback ............................................. 41Recording .......................................................... 28Region Number ................................................... 6Index 2C51801A (53-BACK) 18/07/2003, 10:4766
67Remote Control ................................................. 10Repeat Playback ...............................................40Review Playback .......................................... 26,37Rewind ..............................................................25SSecond Audio Program (SAP)........................... 33Slide-show......................................................... 46Slow Motion.................................................. 26,37Spanish Quick Use Guide ................................. 59Specifications ....................................................58Standard Time................................................... 19Stereo Recording and Playback........................ 33Still ....................................................................26Stop ............................................................. 25, 36Subtitle ..............................................................42Soundtrack ........................................................42TTimer Recording................................................ 31Title .....................................................................6Title Selection.................................................... 43Track ...................................................................6Tracking ............................................................26Tuner Setting..................................................... 22TV/CATV Selection ........................................... 22UUnloading ..........................................................24VVideo Channel................................................... 18Video Head Cleaning ........................................57Video Index Search System .............................. 27WWeak Signal Display ......................................... 23Wide ..................................................................52ZZero Search ...................................................... 27Zooming ............................................................38 2C51801A (53-BACK) 18/07/2003, 10:4767
PPrinted in Thailand03/09 UPanasonic Consumer Electronics Company,Division of Matsushita Electric Corporation of AmericaOne Panasonic Way Secaucus,New Jersey 07094Panasonic Sales Company (“PSC”),Division of Matsushita Electric of Puerto Rico, Inc.Ave. 65 de Infanteria. Km. 9.5San Gabriel Industrial Park, Carolina, Puerto Rico 00985 2C51801A (53-BACK) 18/07/2003, 10:4768

Navigation menu