ORION ELECTRIC M2F4B DVD/VCR TV Interface Device User Manual

ORION ELECTRIC CO., LTD. DVD/VCR TV Interface Device Users Manual

Users Manual

21422293439IntroductionDIGITAL VIDEO42455561DVD VIDEO PLAYER & VIDEOCASSETTE RECORDERSD-V393SU2OWNER’S MANUAL©2005 Toshiba CorporationThis device does not tape-record copy protected DVD Video Discs.ConnectionsBasic setup(VCR)Playback(VCR)Recording(VCR)Other functions(VCR)Basic playback(DVD)Advancedplayback(DVD)Function setup(DVD)Others 2H20101A (E)COV 2/1/05, 7:51 PM1DRAFT
2IntroductionIMPORTANT SAFEGUARDSWARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rainor moisture.CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH ANEXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CANBE FULLY INSERTED TO PREVENT BLADE EXPOSURE.FCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION:Changes or modifications not expressly approved by the partly responsible for compliance with theFCC Rules could void the user's authority to operate this equipment.CAUTION: THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CARE-FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTE-NANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHERTHAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLO-SURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.DO NOT STARE INTO BEAM.The lightning flash with arrowhead symbol, within anequilateral triangle is intended to alert the user to the presenceof uninsulated dangerous voltage within the product'senclosure that may be of sufficient magnitude to constitute arisk of electric shock to persons.The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operating andmaintenance (servicing) instructions in the literatureaccompanying the appliance.Location of the required MarkingThe rating sheet and the safety caution are on the rear of the unit.CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCESTANDARDS, 21 CFR SUBCHAPTER J.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTION 2H20101A (E)p02-13 2/1/05, 7:51 PM2
3Introduction1. READ INSTRUCTIONSAll the safety and operating instructions should be read before the unit is operated.2. RETAIN INSTRUCTIONSThe safety and operating instructions should be retained for future reference.3. HEED WARNINGSAll warnings on the unit and in the operating instructions should be adhered to.4. FOLLOW INSTRUCTIONSAll operating and use instructions should be followed.5. CLEANINGUnplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.Use a soft dry cloth for cleaning the exterior cabinet only.6. ATTACHMENTSThe manufacturer of this unit does not make any recommendations for attachments, as they may causehazards.7. WATER AND MOISTUREDo not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wetbasement, or near a swimming pool.8. ACCESSORIESDo not place this unit on an unstable cart, stand, tripod, bracket, or table.The unit may fall, causing serious injury, and serious damage to the unit.8A. An appliance and cart combination should be moved with care. Quick stops,excessive force, and uneven surfaces may cause the appliance and cartcombination to overturn.9. VENTILATIONSlots and openings in the cabinet back or bottom are provided for ventilation,to ensure reliable operation of the unit, and to protect it from overheating.These openings must not be blocked or covered. The openings should never be blocked by placing the uniton a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heatsource. This unit should not be placed in a built-in installation such as a bookcase or rack unless properventilation is provided and/or the manufacturer’s instructions have been adhered to.10. POWER SOURCEThis unit should be operated only from the type of power source indicated on the rating plate. If you are notsure of the type of power supply to your home, consult your appliance dealer or local power company.11. GROUNDING OR POLARIZATIONThis unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than theother). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable toinsert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact yourelectrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.12. POWER-CORD PROTECTIONPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placedupon or against them, paying particular attention to cords at plugs, convenience receptacles, and the pointwhere they exit from the appliance.S3125APORTABLE CART WARNING(symbol provided by RETAC)IMPORTANT SAFEGUARDS 2H20101A (E)p02-13 2/1/05, 7:51 PM3
4IntroductionIMPORTANT SAFEGUARDS13. LIGHTNINGTo protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to theunit due to lightning and power line surges.14. POWER LINESAn outside antenna system should not be located in the vicinity of overhead power lines or other electriclight or power circuits, or where it can fall onto or against such power lines or circuits. When installing anoutside antenna system, extreme care should be taken to keep from touching such power lines or circuits,as contact with them might be fatal.15. OVERLOADINGDo not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.16. OBJECT AND LIQUID ENTRYDo not push objects through any openings in this unit, as they may touch dangerous voltage points or shortout parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.17. OUTDOOR ANTENNA GROUNDINGIf an outside antenna or cable system is connected to the unit, be sure the antenna or cable system isgrounded to provide some protection against voltage surges and built-up static charges, Section 810 of theNational Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mastand supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of groundingconductors, location of antenna discharge unit, connection to grounding electrodes, and requirements forthe grounding electrode.EXAMPLE OF ANTENNA GROUNDING AS PER THENATIONAL ELECTRICAL CODEANTENNADISCHARGE UNIT(NEC SECTION 810-20)ANTENNA LEAD IN WIREGROUNDING CONDUCTORS(NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)GROUND CLAMPELECTRIC SERVICEEQUIPMENTNEC-NATIONAL ELECTRICAL CODES2898A18. SERVICINGDo not attempt to service this unit yourself as opening or removing covers may expose you to dangerousvoltage or other hazards. Refer all servicing to qualified service personnel.For example:a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fallen into the unit.c. If the unit has been exposed to rain or water.d.If the unit does not operate normally by following the operating instructions. Adjust only those controls thatare covered by the operating instructions, as an improper adjustment of other controls may result in damageand will often require extensive work by a qualified technician to restore the unit to its normal operation.e. If the unit has been dropped or the cabinet has been damaged.f . When the unit exhibits a distinct change in performance, this indicates a need for service. 2H20101A (E)p02-13 2/1/05, 7:51 PM4
5Introduction19. REPLACEMENT PARTSWhen replacement parts are required, be sure the service technician uses replacement parts specified bythe manufacturer or those that have the same characteristics as the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.20. SAFETY CHECKUpon completion of any service or repairs to this unit, ask the service technician to perform safety checks todetermine that the unit is in proper operating condition.21. HEATThe product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts (including amplifiers) that produce heat.22. DISC TRAYKeep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.23. CONNECTINGWhen you connect the product to other equipment, turn off the power and unplug all of the equipment fromthe wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the otherequipment carefully and follow the instructions when making any connections.24. LASER BEAMDo not look into the opening of the disc tray or ventilation opening of the product to see the source of thelaser beam. It may cause sight damage.25. DISCDo not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause seriouspersonal injury and product malfunction.26. NOTE TO CABLE TV SYSTEM INSTALLERThis reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC thatprovides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-nected to the grounding system of the building, as close to the point of cable entry as practical.TO USE AC POWER SOURCEUse the AC polarized line cord provided for operation on AC. Insertthe AC cord plug into a standard 120V 60Hz polarized AC outlet.Notes:•Never connect the AC line cord plug to other than the specifiedvoltage (120V 60Hz). Use the attached power cord only.•If the polarized AC cord does not fit into a non-polarized ACoutlet, do not attempt to file or cut the blade. It is the user’sresponsibility to have an electrician replace the obsolete outlet.•If you cause a static discharge when touching the unit and theunit fails to function, simply unplug the unit from the AC outletand plug it back in. The unit should return to normal operation.Polarized AC Cord Plug(One blade is wider than the other.)AC OutletWider Holeand BladePower sourceIMPORTANT SAFEGUARDS / Power source 2H20101A (E)p02-13 2/1/05, 7:51 PM5
6IntroductionNotes on handlingWhen shipping the DVD/VCR, the original shippingcarton and packing materials come in handy. Formaximum protection, repack the unit as it wasoriginally packed at the factory.Do not use volatile liquids, such as insect spray, nearthe DVD/VCR. Do not leave rubber or plasticproducts to contact the DVD/VCR for a prolongedperiod. They will leave marks on the finish.The top and rear panels of the DVD/VCR maybecome warm after a long period of use. This is not amalfunction.When the DVD/VCR is not in use, be sure to removethe disc and the video cassette turn off the power.If you do not use the DVD/VCR for a long period, theunit may not function properly in the future. Turn onand use the DVD/VCR occasionally.Notes on locatingPlace the DVD/VCR on a level surface. Do not use iton a shaky or unstable surface such as a wobblingtable or inclined stand. The loaded disc or the videotape may become dis-aligned and damage the DVD/VCR.When you place this DVD/VCR near a TV, radio, orVCR, the playback picture may become poor and thesound may be distorted. In this case, place the DVD/VCR away from the TV, radio, or VCR.Notes on cleaningUse a soft, dry cloth for cleaning.Use a dry cloth to wipe.Do not use any type of solvent, such as thinner andbenzine, as they may damage the surface of theDVD/VCR.If you use a chemical saturated cloth to clean the unit,follow that product’s instructions.Notes on moisture condensationMoisture condensation damages the DVD/VCR.Please read the following carefully.Moisture condensation occurs, for example, when youpour a cold drink into a glass on a warm day. Drops ofwater form on the outside of the glass. In the same way,moisture may condense on the head drum or the opticalpick-up lens inside this unit, one of the most crucialinternal parts of the DVD/VCR.Moisture condensation occurs during thefollowing cases.When you bring the DVD/VCR directly from a coldplace to a warm place.When you use the DVD/VCR in a room where youjust turned on the heater, or a place where the coldwind from the air conditioner directly hits the unit.In summer, when you use the DVD/VCR in a hot andhumid place just after you move the unit from an airconditioned room.When you use the DVD/VCR in a humid place.Do not use the DVD/VCR when moisturecondensation may occur.If you use the DVD/VCR in such a situation, it maydamage discs and internal parts. Remove the disc orthe video tape, connect the power cord of the DVD/VCR to the wall outlet, turn on the DVD/VCR, andleave it for two or three hours. After two or threehours, the DVD/VCR will have warmed up andevaporated any moisture. Keep the DVD/VCRconnected to the wall outlet and moisturecondensation will seldom occur.PrecautionsExampleofmoisturecondensation!TapeHead drumIt’s toowarm!Wait! 2H20101A (E)p02-13 2/1/05, 7:51 PM6
7IntroductionNotes on discsOn handling discsDo not touch the playback side of the disc.Do not attach paper or tape to discs.On cleaning discsFingerprints and dust on the disc cause picture andsound deterioration. Wipe the disc from the centeroutwards with a soft cloth. Always keep the discclean.Do not use any type of solvent such as thinner,benzine, commercially available cleaners or antistaticspray for vinyl LPs. It may damage the disc.On storing discsDo not store discs in a place subject to direct sunlightor near heat sources.Do not store discs in places subject to moisture anddust such as a bathroom or near a humidifier.Store discs vertically in a case. Stacking or placingobjects on discs outside of their case may causewarping.Playback sideDVD video discTitle 1 Title 2Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3Track 1 Track 2 Track 3 Track 4 Track 5Structure of disc contentsNormally, DVD video discs are divided into titles, andthe titles are sub-divided into chapters. VIDEO CDs andaudio CDs are divided into tracks.DVD video discVideo CD/Audio CDEach title, chapter or track is assigned a number, whichis called “title number”, “chapter number” or “tracknumber” respectively.There may be discs that do not have these numbers.Notes on copyrightIt is forbidden by law to copy, broadcast, show,broadcast on cable, play in public, and rent copyrightedmaterial without permission.This device does not tape-record copy protected DVDVideo Discs.The device is not to be used for copying copyrightedcontent without the express written permission of thecopyright owner.Obtaining such permission is the sole responsibility ofthe user.This product incorporates copyright protectiontechnology that is protected by method claims of certainU.S. patents and other intellectual property rightsowned by Macrovision Corporation and other rightsowners. Use of this copyright protection technologymust be authorized by Macrovision Corporation, and isintended for home and other limited viewing uses onlyunless otherwise authorized by MacrovisionCorporation. Reverse engineering or disassembly isprohibited.Video CD/Audio CD 2H20101A (E)p02-13 2/1/05, 7:51 PM7
8IntroductionDIGITAL VIDEOAbout this owner’s manualThis owner’s manual explains the basic instructions ofthis DVD/VCR. Some DVD video discs are produced ina manner that allows specific or limited operation duringplayback. As such, the DVD/VCR may not respond to alloperating commands. This is not a defect in the DVD/VCR. Refer to instruction notes of discs.“” may appear on the TV screen during operation.A “ ” means that the operation is not permitted by theDVD/VCR or the disc.For example, sometimes it is unable to stop theplayback of copyright message of the disc when theSTOP ( ) button is pressed. Alternatively, the “ ” mayalso indicate that the feature is not available for the disc.Notes on region numbersThe region number of this DVD/VCR is 1. If regionnumbers, which stand for their playable area, are printedon your DVD video disc and you do not find 1 or ALL ,disc playback will not be allowed by the player. (In thiscase, the DVD/VCR will display a message on-screen.)On Video CDsThis DVD/VCR supports Video CDs equipped with thePBC (Version 2.0) function. (PBC is the abbreviation ofPlayback Control.) You can enjoy two playbackvariations depending on types of discs.• Video CD not equipped with PBC function(Version 1.1)Sound and movie can be played on this DVD/VCR inthe same way as an audio CD.• Video CD equipped with PBC function(Version 2.0)In addition to operation of a Video CD not equippedwith the PBC function, you can enjoy playback ofinteractive software with search function by using themenu displayed on the TV screen (Menu Playback).Some of the functions described in this owner’smanual may not work with some discs.Playable discsThis DVD/VCR can play the following discs.• You cannot play discs other than those listed above.• You cannot play discs of DVD-RAM, DVD-ROM, PhotoCD, etc., or non standardized discs even if they maybe labeled as above.• Some CD-R/RWs cannot be played back dependingon the recording conditions.• This DVD/VCR uses the NTSC color system, andcannot play DVD video discs recorded in any othercolor system (PAL, SECAM, etc.).Because of problems and errors that can occurduring the creation of DVD software and/or themanufacture of DVD discs, Toshiba AmericaConsumer Products, L.L.C. and Toshiba of Canada,Ltd. cannot guarantee that this player will play everyfeature of every DVD bearing the DVD logo.As one of the creators of DVD technology, ToshibaDVD players are manufactured to the higheststandards of quality and, as a result, suchincompatibilities are very rare. If you happen toexperience and difficulty playing a DVD on a ToshibaDVD player, please feel free to call our Contact listedin “How to Obtain Warranty Services” (page 65).Notes on discs (continued)DVDvideodiscsDisc MarkContentsDiscSize Maximumplayback timeVideoCDsApprox. 4 hours(single sided disc)Approx. 8 hours(double sided disc)Approx. 80 minutes(single sided disc)Approx. 160 minutes(double sided disc)Approx. 74 minutesApprox. 20 minutes8 cm12 cm8 cm12 cmAudio+Video(movingpictures)Audio+Video(movingpictures)AudioCDsApprox. 74 minutesApprox. 20 minutes8 cm(CDsingle)12 cmAudioThe following discs are also available.DVD-R/RW discs of DVD video formatCD-R/CD-RW discs of CD-DA, Video CD, SVCD,MP3, WMA or JPEG formatKodak Picture CD and FUJICOLOR CD formatSome of these discs may be incompatible. 2H20101A (E)p02-13 2/1/05, 7:51 PM8
9IntroductionIMPORTANT SAFEGUARDS ..........................2Power source ...................................................5Precautions ......................................................6Notes on discs..................................................7Contents. ..........................................................9Identification of controls ................................. 10Antenna connections...................................... 14Cable TV connections ....................................16Connecting to a TV ........................................ 18Connecting to optional equipment.................. 20IntroductionRecording a TV program ................................ 34One-touch Timer Recording (OTR) ................ 36Timer recording .............................................. 37Recording (VCR)Stereo recording and playback ...................... 39Second Audio Program (SAP)........................ 39Duplicating a video tape ................................. 40Recording a DVD/CD disc.............................. 41Other functions (VCR)Loading and unloading a cassette tape ......... 29Cassette tape playback .................................. 30Special playback ............................................ 31Convenience function..................................... 32Playback (VCR)Setting the video channel ............................... 22Setting the language ...................................... 23Clock setting................................................... 24Tuner setting .................................................. 27Basic setup (VCR)Playing a disc ................................................. 42Basic playback (DVD)Advanced playback (DVD)Zooming ......................................................... 45Locating desired scene .................................. 45Marking desired scenes ................................. 46Repeat playback............................................. 47A-B Repeat playback...................................... 47Program playback .......................................... 48Random playback........................................... 48Changing angles ............................................ 49Title selection ................................................. 49DVD menu ...................................................... 49Changing soundtrack language ..................... 50Setting surround sound .................................. 50Subtitles ......................................................... 51To turn off the PBC......................................... 51MP3/WMA/JPEG operation............................ 52Function setup (DVD)Customizing the function settings .................. 55Temporary disabling of rating level byDVD disc ........................................................ 60Language code list ......................................... 61Troubleshooting ............................................. 62Specifications ................................................. 63Limited warranty ............................................. 64OthersContentsConnections 2H20101A (E)p02-13 2/1/05, 7:51 PM9
10IntroductionIdentification of controlsSee the page in for details.Front panel Rear panelON/STANDBY buttonAUDIO (L/R)/VIDEO IN(LINE IN 2) jacks2240EJECTbutton29Cassette loading slot29Disc tray42Display window11REC button34CHANNEL / buttons34OPEN/CLOSE button42STOP buttonPLAY buttonFWD buttonREW button30303030VCR/DVD mode selectorbutton22Remote sensor13VCR indicatorDVD indicator4222DVD S-VIDEO OUT jack 19DVD AUDIO (L/R)OUT jacks19DVD COAXIAL DIGITAL AUDIO OUT jack20DVD COMPONENTOUT jacks19ANT OUT jack14ANT IN jack14AUDIO (L/R)/VIDEOIN (LINE IN1) jacks40DVD/VCR common AUDIO(L/R)/VIDEO OUT jacks18AC power cord5 2H20101A (E)p02-13 2/1/05, 7:51 PM10
11IntroductionVCR operation statusCH 1258 : 47AM MON00 : 00 : 00 SPSTEREO SAPWhile watching TVDAY OF THE WEEKCHANNELTAPE SPEEDREAL TIME COUNTERCLOCKSTEREO ANDSECONDAUDIOPROGRAM(SAP)8 : 30AM MON00 : 15 : 12 SPHI-FISTEREOWhile operating a tapeOPERATINGMODETAPE INAUTO REPEATHI-FI STEREODVD/CD/VCD operation statusPress CALL to display VCR operation status on the screen.To cancel the display, press CALL again.Recording :Rec/Pause :Play :Stop :Eject :VCR Icons34:56 71:33Track 11/9900:34:56 01:12:33Each press of DISPLAY, the status display of the disc will appear on the screen and change as follows.DVD00:34:56 01:12:331/9Title 1/991/81/32Chapter 1/999Eng DolbyDigitalEngCD/VCDDISCOPERATIONTRACK NO.ELAPSED TIMECHAPTER NO.ANGLE NO.A KIND OF AUDIODISC OPERATION TITLE NO.ELAPSEDTIMETOTALTIMETOTALTIMEOUTPUT SELECTIONTimer Recording indicator (VCR)Multifunctional indicatorRecordingindicator (VCR)Track indicator (CD)Tape loaded indicator (VCR)Play indicatorVCR indicator (VCR) Still indicator Disc inserted indicator (DVD)Disc insertedindicator (CD)AM/PM indicator(AM is not displayed)Progressive indicatorAUDIO LANGUAGESUBTITLE LANGUAGEDisplay window 2H20101A (E)p02-13 2/1/05, 7:51 PM11
12IntroductionRemote controlMENU buttonUse the MENU button to display the menu included onmany DVD video discs. To operate a menu, follow theinstructions in “DVD Menu.” 49Identification of Controls (continued)The instructions in this manual describe the functions on the remote control. See the page in for details. 2H20101A (E)p02-13 2/1/05, 7:51 PM12
13IntroductionOperation• Aim the remote control at the remote sensor and press control buttons tooperate.• Operate the remote control within 30° angle on either side of the remotesensor, up to a distance of approx. 7 meters.Replace the compartmentcover.Install two “R03/AAA” batteries(supplied), paying attention to thepolarity diagram in the batterycompartment.Open the battery compart-ment cover in the direction ofthe arrow.Approx. 7 metersBattery precautionsThe precautions below should be followed when using batteries in this device:1. Use only the size and type of batteries specified (R03/AAA).2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Re-versed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury frompossible battery leakage.5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow batterymanufacturer’s directions.)6. Dispose of used batteries in a designated area. Do not throw batteries into a fire. Attention should be drawn to theenvironmental aspects of battery disposal.• Press POWER to turn the DVD/VCR on or off.• Select your desired operating mode (DVD or VCR) using VCR DVD.(DVD or VCR indicator on the front panel will show you which mode is selected.)• Press CH + or CH – to move through the channels one channel at a time.• The / / / are also used to navigate on-screen menu system.• You can directly access specific channels using Direct channel selection buttons (0–9).• Each press of VCR DVD on the remote control, switches the screen between the VCR screen (VCR mode) and theDVD screen (DVD mode).123Remote control basicsInserting batteries 2H20101A (E)p02-13 2/1/05, 7:51 PM13
14ConnectionsOUT(TV)IN(ANT)OUT(TV)IN(ANT)OUT(TV)IN(ANT)Notes: •A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna tothe DVD/VCR properly.•For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor typeantenna is required.•If you are not sure about the connection, please refer to qualified service personnel.The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV andconnect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antennasystem to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs andone 75 ohm output.Note:Combination VHF/UHF Antenna with 75 ohm Coaxial CableCombination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) WireSeparate VHF and UHF AntennasDVD/VCRVHF UHF300 ohm Twin Lead (Flat) Wire(not supplied)Matching Transformer 300 ohm Input 75ohm output (not supplied)300 ohm Twin Lead (Flat) Wire(not supplied)75 ohm Coaxial Cable75 ohm Coaxial CableCombiner 75/300 ohm Inputs 75 ohm output(not supplied)DVD/VCRDVD/VCRAntenna connectionsIf you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 16 forthe proper connections.Antenna to DVD/VCR connection123 2H20101A (E)p14-17 2/1/05, 7:51 PM14
15ConnectionsUHFVHFUHFVHFVHF/UHF INNote: If a VHF or UHF antenna is used,set the TV/CABLE menu option tothe “TV” mode.Note: If a VHF or UHF antenna is used,set the TV/CABLE menu optionto the “TV” mode.Note: If a VHF or UHF antenna is used,set the TV/CABLE menu option tothe “TV” mode.75 ohm Coaxial Cable (supplied)Splitter 75 ohm Input75/300 ohm outputs(not supplied)Splitter 75 ohm Input300 ohm outputs(not supplied)TV with single 75 ohm VHF/UHF antennainputTV with 300 ohm UHF and 75 ohm VHFantenna inputsTV with 300 ohm UHF and 300 ohm VHFantenna inputsAfter you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow theconnection diagram.This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antennainputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.TVTVTV75 ohm Coaxial Cable(supplied)75 ohm Coaxial Cable(supplied) DVD/VCR to TV connection 2H20101A (E)p14-17 2/1/05, 7:51 PM15
16ConnectionsCable TV connectionsVHF/UHFIN (ANT)OUT(TV)IN(ANT)VHF/UHFIN (ANT)OUT(TV)IN(ANT)VHF/UHFIN (ANT)OUT(TV)IN(ANT)Many cable companies offer services permitting reception of extra channels including pay or subscription channels. ThisDVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable companysupplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to apremium channel which is scrambled, you must have a descrambler box for proper reception.Allows: *Recording of nonscrambled channels.*Use of the programmable timer.*Recording of one channel while watching another.Allows: *Recording of channels through the converter box(scrambled and unscrambled).*Using the programmable timer to record only thechannel selected at the converter box.Prevents: *Recording one channel while watching another.*Using the DVD/VCR tuner to select channels.DVD/VCRIncoming CableTVConverter/DescramblerIncomingCableTVTVNote:To record from converter/descrambler, DVD/VCR tuner must be tuned to the converteroutput channel, usually channel 3 or 4.DVD/VCRDVD/VCRNote: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output ofthe Converter/Descrambler box, usually channel 3 or 4.Incoming Cable Converter/DescramblerAllows: *Recording of nonscrambled channels.*Use of the programmable timer.*Recording an unscrambled channel while watchingany channel selected at the converter box.Prevents: Recording scrambled channels.Note:If you are playing a tape or using the tunerbuilt into the DVD/VCR, the converter mustbe set to the video channel output of the DVD/VCR (either 3 or 4).123 2H20101A (E)p14-17 2/1/05, 7:51 PM16
17ConnectionsVHF/UHFIN (ANT)ABOUT(TV)IN(ANT)VHF/UHFIN (ANT)ABOUT(TV)IN(ANT)This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scram-bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con-sult your local cable company for more information concerning connection to their descrambler equipment. There aremany ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode.Incoming CableAllows: *Recording of one channel while watching another.*Using the programmable timer to record only the channel selected at the converter box.*Recording of all channels through the converter box.Prevents: *Watching scrambled channels while recording another channel.*Using the DVD/VCR tuner to select channels.DVD/VCRSplitterConverter/DescramblerTVDVD/VCRConverter/Descrambler A/B SwitchTVIncoming CableSplitterAllows: *Recording of nonscrambled channels.*Recording of one channel while watching another.*Watching premium channels through the converter while recording nonscrambled channels.*Using the programmable timer.Prevents: Recording scrambled channels.DVD/VCRSplitterTVConverter/DescramblerA/B Switch VHF/UHFIN (ANT)ABOUT(TV)IN(ANT)Allows: *Recording of all channels through the converter box.*Recording a scrambled or unscrambled channel while watching another (scrambled orunscrambled) channel.*Using the programmable timer to record only the channel selected at the converter box.Prevents: Using the DVD/VCR tuner to select channels.A/B SwitchIncoming Cable Converter/Descrambler456 2H20101A (E)p14-17 2/1/05, 7:51 PM17
18ConnectionsConnecting to a TV Connect the DVD/VCR to your TV.To VIDEOOUTTo ANALOG AUDIO OUT(red) (white)(yellow)Signal flowTo wall outletTo video input(yellow) (red) (white)Audio/video cable (supplied)To audio inputsNotes:• Refer to the owner’s manual of the connected TV as well.• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet beforemaking any connections.• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (notsupplied) and then connect to your TV.• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector,the playback picture may be distorted as DVD video discs are copy protected.TV or monitor withaudio/video inputsConnecting to a TVNote: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you also connect the S-video or ColorStream® component video outputs to your TV/monitor. 19 2H20101A (E)p18-25 2/1/05, 7:51 PM18
19ConnectionsNotes:• Refer to the owner’s manual of the connected equipment as well.• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from thewall outlet before making any connections.• If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/VCR away from the tuner and radio.• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderatelistening level. Otherwise, the speakers may be damaged by a sudden high volume sound.• Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, thespeakers may be damaged.•When connecting to a TV using the Video or S-video jack, make sure that the Progressive indicator “” on thedisplay window is not lit. If it is lit, the Video and S-video outputs do not feed the correct signals and you cannot seeany picture. To turn off the Progressive indicator, select PROGRESSIVE scan Off .The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVDvideo picture performance.TV or monitor withColorStream®component video inputsTo PR/CR video inputTo PR/CRVIDEOOUTSignal flowTo wall outletTo audio inputs ofthe amplifier(red)(white)(red) (white)To YVIDEOOUTTo PB/CBVIDEOOUTTo Y video inputTo PB/CB video inputAudio systemTo ANALOGAUDIO OUTTo S-VIDEOOUTComponentvideo cable(not supplied)To S-video inputS-video cable (not supplied)Audio cable (not supplied)S-video outputAn S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has S-Video input, and does not have component video inputs.Component video outputsPROGRESSIVE outputsSome TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned videosignal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.INTERLACED outputsSome TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest qualityDVD picture playback.Notes:• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)• In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such acase, adjust the TV or monitor for optimum performance.Connecting to an audio system and TV equipped with S-video input/component video inputsIf you connect the DVD/VCR toyour TV with the DVD OUT jacks,select the corresponding videoinput on your television to watchDVD video discs.To switch the scan mode between theinterlace and progressive modes, seepage 59. 2H20101A (E)p18-25 2/1/05, 7:52 PM19
20ConnectionsConnecting to optional equipmentYou can enjoy high quality dynamic sounds of DVD video discs oraudio CDs by connecting the DVD/VCR to optional audioequipment.For connection to your TV, see “Connecting to a TV” 18 19.: Front speaker: Rear speaker: Sub woofer: Center speaker: Signal flowConnecting to an amplifier equipped with a Dolby Digital decoderConnecting to an amplifier equipped with Dolby Surround Pro LogicDolby Surround Pro LogicYou can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and leftfront speakers, a center speaker, and one or two rear speakers).Connecting to an amplifier equipped with a DTS decoderDigital Theater Systems (DTS)DTS is a high quality surround technology used in theaters and now available for home use,on DVD video discs or audio CDs.If you have a DTS decoder or processor, you can obtain the fullbenefit of 5.1 channel DTS encoded sound tracks on DVDvideo discs or audio CDs.Manufactured under license fromDolby Laboratories. “Dolby” “ProLogic” and the double-D symbol areregistered trademarks of DolbyLaboratories.• Use DVD video discsencoded via the Dolby Digitalrecording system.• Use DVD video discs oraudio CDs encoded via theDTS recording system.* Connect one or two rear speakers.The output sound from the rearspeakers will be monaural even if youconnect two rear speakers.“DTS” and “DTS Digital Out” areregistered trademarks of Digital TheaterSystems, Inc.Amplifier equipped with aDolby Digital decoder75 Ω coaxial cable (not supplied)To COAXIALtype digitalaudio input*Amplifier equipped with aDTS decoderTo COAXIALtype digitalaudio input• This selection uses the following reference mark.To ANALOGAUDIO OUTTo audio inputAudio cable (not supplied)75 Ω coaxial cable (not supplied)Dolby DigitalDolby Digital is the surround sound technology used in theaters showing the latest movies, and isnow available to reproduce this realistic effect in the home. You can enjoy motion picture and liveconcert DVD video discs encoded via the Dolby Digital recording system with this dynamic realisticsound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoderor Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the fullbenefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,as well as from titles with the Dolby Surround mark.Amplifier equipped withDolby Surround Pro LogicWith an amplifier equipped with Dolby DigitalConnect the equipment the same way as described in “Connecting to an amplifierequipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and setthe amplifier so you can enjoy Dolby Surround Pro Logic sound.With an amplifier not equipped with Dolby DigitalConnect the equipment as follows.• This connection is only suitable for Video CDs and Audio CDs.To COAXIAL DIGITALAUDIO OUTTo COAXIAL DIGITALAUDIO OUT 2H20101A (E)p18-25 2/1/05, 7:52 PM20
21Connections75 Ω coaxial cable (not supplied)75 Ω coaxial cable (not supplied)WarningWhen playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoidpossible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of theDVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires dangling.) To enjoyDTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to theBITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.Connecting to an amplifier equipped with an MPEG2 audio decoderMPEG2 soundYou can enjoy motion picture and live concert DVD video discs encorded via the MPEG2 recording system with dynamic realisticsound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.Connecting to an amplifier equipped with a digital audio input2 channel digital stereoYou can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speakersystem (right and left front speakers).Notes:• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver.This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIOOUT jack of the DVD/VCR.• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the “COAXIAL” input of a Receiver or Processor.• Refer to the owner’s manual of the connected equipment as well.• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from thewall outlet before making any connections.• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderatelistening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.• Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, thespeakers may be damaged.• Use DVD video discsencoded via the MPEG2recording system.Amplifier equipped with anMPEG2 audio decoderTo COAXIALtype digitalaudio inputAmplifier equipped with adigital audio inputTo COAXIALtype digitalaudio inputTo COAXIAL DIGITALAUDIO OUTTo COAXIAL DIGITALAUDIO OUT 2H20101A (E)p18-25 2/1/05, 7:52 PM21
22Basic setupSetting the video channelWhen a TV is connected with the 75 ohm coaxial cable only.To view playback of a recorded tape or DVD disc, or to watch aprogram selected by the VCR's channel selector, the TV must be set tochannel 3 or 4 (video channel).Setting the video channelPress POWER to turn on the DVD/VCR.Press VCR DVD selector to select the VCR mode.Turn ON the TV and set to CH 3 or 4 to corre-spond with the channel selected in step 1.Press TV/VCR to select the VCR position.Select any channel to receive a TV station in your area.The channel number will appear on the screen forabout 4 seconds.1The VCR indicator on thefront panel will light.23456The VCR indicator willappear in the displaywindow.For a push-button TV tunerIf CH 3 or 4 corresponding to the video channel cannotbe tuned on your TV, proceed as follows: set the VCR3/4 channel selector and the TV to CH 3 or 4, playback a prerecorded tape and tune the TV to receive asharp color picture from the video cassette recorder.Refer to your TV owner's manual for details.Note:If the unit does not operate properly, or No key operation(by the unit and/or the remote control): Static electricity, etc.,may affect the player's operation. Disconnect the AC power cordonce, then connect it again.POWERVCR DVDTV/VCRPress and hold 3 or 4 on the remote for 3seconds in standby mode.The video channel willstart to flash for 3seconds in the displaywindow.34OR 2H20101A (E)p18-25 2/1/05, 7:52 PM22
23Basic setupPress SET + or – to select “LANGUAGE”, thenpress ENTER.Press VCR MENU.The VCR menu screen will appear.Press SET + or – to select “SYSTEMSETUP”, then press ENTER.If you use the unit for the first time andpress VCR MENU, instead of themain menu screen the “SYSTEMSETUP” menu screen in step 2 mayappear.Setting the languageSetting the languageYou can choose from three different languages (English,French and Spanish) for the on-screen displays.12Press SET + or – to select the desired language:English (ENGLISH), Spanish (ESPAÑOL) orFrench (FRANCAIS), then press ENTER.3Press VCR MENU until the MENU screen iscleared.4⟨ ⟩⟨⟩⟨ ⟩Notes:• Both the VCR and the DVD have their own player menus 55.• If no buttons are pressed for more than 60 seconds, the VCRMENU screen will return to normal TV-operation automatically.Preparation:• Turn ON the TV and select to the correspondingvideo input.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)SET +/–VCR MENUVCR DVDENTER 2H20101A (E)p18-25 2/1/05, 7:52 PM23
24Basic setupConnect the Antenna or Cable system.• If you use a cable box, turn it on.Clock settingThe AUTO CLOCK function will automatically set the built-in clock(Month, Day, Year and Time) when the DVD/VCR is connected to anAntenna or Cable system and it is turned off. The DVD/VCR searchesfor a station in your area containing the necessary AUTO CLOCK settingsignals. Once received, it will take approximately 4 minutes for the clockto set itself automatically.Preparation:• Turn ON the TV and select the corresponding video input.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)1AUTO CLOCK settingPlug the AC power cord to the AC outlet.2Make sure the DVD/VCR is turned off.• If you press POWER, the Auto Clock set is not programmed.3Wait at least three minutes and press POWER.4Press CALL to check the clock setting onthe on screen display.5If the clock is not set, check the antennacondition. The AUTO CLOCK may notfunction properly if the reception conditionis not good.6AUTO CLOCK adjustmentTo set AUTO CLOCK to offThe auto clock adjustment will be updated at 6:00AM, 12:00 PM and 6:00 PM everyday when theDVD/VCR turned off.• If you use a cable box and you want AUTO CLOCKadjustment to be performed, the cable box must beleft on.• The AUTO CLOCK adjustment is not effective whenthere is a difference of more than 5 minutes existsbetween the built-in clock time and the actual time.When shipped from factory the AUTO CLOCK is set to “ON”.But if you do not want AUTO CLOCK setting:Press VCR MENU.1Press SET + or – to select “SYSTEM SETUP”,then press ENTER.2Press SET + or – to select “AUTO CLOCK”.3Press ENTER to select “OFF”.4Press VCR MENU repeatedly to return to thenormal screen.• When the AUTO CLOCK is set to“OFF”, the AUTO CLOCK adjust-ment does not function.• Set the clock manually 26.5CH 1258 : 47AM MON00 : 00 : 00 SPSTEREO SAPPOWERVCR MENUENTERCALLVCR DVDSET +/– 2H20101A (E)p18-25 2/1/05, 7:52 PM24
25Basic setupPress VCR MENU.1Press SET + or – to select “SYSTEM SETUP”,then press ENTER.2Press SET + or – to select “STANDARD TIME”,then press ENTER.3Press SET + or – to select your time zone,then press ENTER.4Press VCR MENU until the MENU screen iscleared.5In the rare event that you live within broadcast range of twostations in two different time zones, the DVD/VCR mayrecognize the wrong station for the AUTO CLOCK setting.To correct the situation:Notes:• To be able to select the standard time, the clock must first beset by AUTO CLOCK once.• If you live in Newfoundland and the AUTO CLOCK does notfunction properly, set the AUTO CLOCK menu option to “OFF”and set the clock manually.Press VCR MENU.Press SET + or – to select “SYSTEM SETUP”,then press ENTER.1Press SET + or – to select “DAYLIGHTSAVING TIME”, then press ENTER.2Press SET + or – to select one of theoptions, then press ENTER. Press VCRMENU until the MENU screen is cleared.3Notes:• When shipped from factory, the DAYLIGHT SAVING TIME isset to “AUTO” position.• When the clock is not set, DAYLIGHT SAVING TIME settingis not available.• When there is no DAYLIGHT SAVING TIME in your area, al-ways select “OFF” position in step 3.When you want to set the DAYLIGHTSAVING TIME manually, on the firstSunday in April you set to “ON”, andon the last Sunday in October you setto “OFF”.ON:OFF:AUTO:for manual setting(forward one hour)for manual setting(back one hour)for automatic setting(read XDS in the signal)⟨⟩ATLANTIC : GMT–4hoursEASTERN : GMT–5hoursCENTRAL : GMT–6hoursMOUNTAIN : GMT–7hoursPACIFIC : GMT–8hoursALASKA : GMT–9hoursHAWAII : GMT–10hoursAUTO : AUTO SET(GMT: Greenwich Mean Time)⟨⟩To set DAYLIGHT SAVING TIMEYou can set the DAYLIGHT SAVING TIME automatically ormanually.To set STANDARD TIME 2H20101A (E)p18-25 2/1/05, 7:52 PM25
26Basic setupCANCELPress VCR MENU.EXAMPLE: Setting the clock to “8:30 AM” March, 26(SAT), 2005.18 : 30AMSATManual clock settingAfter setting the clock, date and time startsfunctioning automatically.6Note:After a power failure or disconnection of the power, the timersettings will be lost. In this case, reset the present time.To make corrections any time during the processPress CANCEL repeatedly until the item you want tochange blinks, then press SET + or –.Press SET + or – to select “SYSTEM SETUP”,then press ENTER.2Press SET + or – to select “CLOCK SET”,then press ENTER.3Press SET + or – to set the month, then pressENTER.4Set the day, year and time as in step 4.5⟨ ⟩Clock setting (continued)If the AUTO CLOCK process did not set the date and time correctly,you must set them manually for timer recording and DAYLIGHTSAVING TIME.VCR MENU⟨ ⟩⟨ ⟩ENTERSET +/– 2H20101A (E)p26-31 2/1/05, 7:52 PM26
27Basic setupTuner settingThis DVD/VCR is equipped with a channel memory feature which allowschannels to skip up or down to the next channel set into memory,skipping over unwanted channels. Before selecting channels, they mustbe programmed into the DVD/VCR’s memory. In addition to normalVHF and UHF channels, this DVD/VCR can receive up to 113 CableTV channels. To use this DVD/VCR with an antenna, set the TV/CABLEmenu option to the TV mode. When shipped from the factory, this menuoption is in the CABLE mode.Press VCR MENU. Press SET + or – to select“CH SETUP”, then press ENTER.1Press SET + or – to select “TV/CABLE”.2TV/CABLE selection Setting channels automaticallyRepeat left step 1 and press SET + or – toselect “AUTO CH MEMORY”.1Press ENTER.Auto tuning will begin. The channel dis-play will count up and when finished,the screen returns to normal.2Note:You can’t select “CH SETUP” if you set the channel to “L1” or“L2”.Press ENTER to select the TV or CABLEmode.The arrow indicates the selected mode.3Press VCR MENU until the menu screen iscleared.4TV - VHF/UHF channelsCABLE - Cable TV channelsVCR MENUENTER⟨ ⟩VCR DVDPreparation:• Turn ON the TV and select to the correspondingvideo input.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)SET +/– 2H20101A (E)p26-31 2/1/05, 7:52 PM27
28Basic setupRepeat the step 1 on page 27. Then press SET + or– to select the “ADD/DELETE” and press ENTER.1To ADD/DELETE channelsPress VCR MENU until the menu screen iscleared.3To Add or Delete desired channels21) Press Direct channel selection buttons (0–9)or SET +/– to select a channel number you wantto add or delete.2) To add channelsPress ENTER until “ADD” appears on the screen.To delete channelsPress ENTER until “DELETE” appears on thescreen. The channel number will blink3) Repeat 1) to 2) to add or delete other channel.Tuner setting (continued)Noise eliminationWhen you don't want to receive a weak signal broadcast, aBlue back screen can be obtained by selecting the NO NOISEBACKGROUND “ON”. When the unit is shipped from the fac-tory, the NO NOISE BACKGROUND is set to “ON”.Repeat the steps 1~2 on page 26 and press SET+ or – to select “NO NOISE BACKGROUND”.1Press ENTER to select “ON” or “OFF” position.2⟨⟩Press VCR MENU until the menu screen iscleared.30–9ENTERVCR MENU⟨⟩SET +/– 2H20101A (E)p26-31 2/1/05, 7:52 PM28
29Basic setupLoading and unloading a cassette tapeUse only video cassette tapes marked .LoadingRemove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape.To record againScrewdriverAutomatic tape ejectThis DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning,the cassette tape will be ejected automatically.Press EJECT on the front panel or on the remote.Push the center of the tape until it is automaticallyinserted.Insert the cassette tape with its labeled side facing upand the erase prevention tab positioned at your left. Aninverted cassette tape cannot be inserted.Automatic playbackWhen loading a cassette tape without an erase prevention tab, playback will start automatically.Automatic power ONWhen you insert a cassette tape the DVD/VCR power will turn ON automatically.12Erase prevention tabAdhesive tapeRemove the cassette tape.Erase prevention tabUnloadingTo prevent accidental erasureTo prevent accidental erasureTape speed and maximum recording timeVideo cassette tapeTape SpeedSLP (Super Long Play)T-160 T-120 T-90 T-60 T-302-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hoursSP (Standard Play)Playback (VCR)EJECTPlayback (VCR)or 2H20101A (E)p26-31 2/1/05, 7:52 PM29
30Playback (VCR)Cassette tape playbackTo play a prerecorded tape.Load a prerecorded tape(When loading a cassette tape without the eraseprevention tab, playback will start automatically).Preparation:• Turn ON the TV and select the corresponding video input.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light).1Press PLAY.Playback will start. “ ” will appearon the screen for about 4 seconds.Press STOP once.The tape will stop but remain fullyloaded and ready to play.“ ” will appear on the screen forabout 4 seconds.To stop playbackStop the playback or recording via STOP on remote.To discontinue the tape-winding, press STOP. To switch toplayback directly (without STOP), press PLAY.Notes:• This VCR selects the playback tape speed SP, LP or SLP au-tomatically.• The Cassette tape and DVD disc can be played back simulta-neously. If you press DVD/VCR selector, the tape playbackand DVD playback alternate with each other on the screen(via CH3, 4 or video connection).2To start playbackPlayback Rewind or forward the tapeTo rewind the tape:Press REW.To forward the tape: Press FF.Forward/Reverse picture search modeWhen the tape is being winded, you can switch to picturesearch mode (see next page). To do this, press REW orFF and hold it down. The unit will resume the tapeadvance or rewinding as soon as the button is released.PLAYSTOPFFREWVCR DVD 2H20101A (E)p26-31 2/1/05, 7:52 PM30
31Playback (VCR)Special playbackPicture searchReverse picture search functionPress REW once or twice during playback.Forward picture search functionPress FF once or twice during playback.To return to playback, press PLAY.Press PAUSE/STEP during playback.To resume normal playback, press PLAY or PAUSE/STEP.During playback press SLOW.To return to playback, press PLAY or SLOW.Whenever you insert a tape and start playback, theautomatic tracking feature continuously analyzes the signalto enable optimum picture quality during playback.Press PAUSE/STEP during playback.Press SLOW repeatedly: The picture advances frame byframe.To return to playback, press PLAY or PAUSE/STEP. Slow tracking and vertical lock adjustmentIf noise bars appear in the picture during slow motion,press the SET + /– to reduce the noise bars.If the still picture jitters excessively, press SET +/– tostabilize the still picture.Automatic tracking adjustmentIf automatic tracking cannot eliminate noises well duringplayback, press SET +/– to eliminate the noise. “MANUALTR.” will appear on the screen. Press it briefly for a fineadjustment, or press and hold for a coarse adjustment.Manual tracking adjustmentSPEED SEARCH TIMESAdjusting tracking conditionStill pictureSlow motionFrame by frame pictureNotes:•The audio output is muted during PICTURE, STILL, FRAMEADVANCE and SLOW MOTION.• During picture search mode there will be noise bars. This isnot a defect.• Playback will commence after approx. 5 minutes to protectthe video tape against excessive wear during pause mode.Press ATR to reactivate automatic tracking again.“AUTO TR.” will appear on the screen.PICTURE SEARCH SPEEDPRESS TWICETAPE SPEED PRESS ONCESP (Standard Play)LP (Long Play)SLP (Super Long Play)5 X9 X15 X3 X7 X9 XREWPLAYFFSLOWATRPAUSE/STEPVideo head cleaningVideo head clogging The video heads are the means bywhich the DVD/VCR reads the picturefrom the tape during playback. In theunlikely event that the heads becomedirty enough to be clogged, no picturewill be displayed. This can easily bedetermined if, during playback of aknown good tape, there is good sound,but no picture (picture is extremelysnowy). If this is the case, have theDVD/VCR checked and cleaned byqualified service personnel.Notes:•DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS ORSERVICE THE UNIT BY REMOVING THE REAR COVER.•Video heads may eventually wear out and should be re-placed when they fail to produce clear pictures.•To help prevent video head clogging, use only good qual-ity VHS tapes. Discard worn out tapes.Good PictureSnowy PictureCM skipPress CM SKIP during playback. The DVD/VCR will searchforward through approximately 30 seconds of the tape (e.g.unwanted commercial time) for each press of CM SKIP(maximum six presses) and then resume normal playback.For example : 1 press: 30 seconds of tape2 press: 60 seconds of tape3 press: 90 seconds of tapeCM SKIPSET +/– 2H20101A (E)p26-31 2/1/05, 7:52 PM31
32Playback (VCR)Convenience functionTo cancel repeat mode:Follow the above step 1, then press ENTER to select“OFF” position. Press VCR MENU to return to the TV.Press VCR MENU. Press SET + or – to select “AUTO REPEAT”.1Press ENTER to select “ON” or “OFF”.If “ON” is selected, the playbackwill be repeated endlessly.2Press VCR MENU until the menu screen iscleared.If you press CALL, “ ” will appear on the screen 11.3To commence playback, press PLAY.The playback will be repeated endlessly.4This function rewinds the tape to the “00:00:00” counter positionautomatically.Press CLOCK/COUNTER.The counter display shows the tape run-ning time during playback or recording.1Press COUNTER RESET at the desired tapeposition.The counter display will be reset to“00:00:00” position (e.g. the beginningof recording).2Press STOP when playback or recording iscompleted.Press ZERO RETURN.The tape will automatically rewind or fastforward to the “00:00:00” counter posi-tion.3Repeat playbackThe entire video tape will play until its end. The tape willautomatically rewind to the beginning and the playback willbe repeated.Zero return functionCOUNTER RESETPLAYVCR MENUSET +/–ENTERSTOPZERO RETURNCLOCK/COUNTERCALL 2H20101A (E)p32-37 2/1/05, 7:53 PM32
33Playback (VCR)This function enables you to locate the beginning of anyrecording made on the VCR.Recording an INDEX markThe Index Search function auto-matically records an INDEX markon the tape whenever a recordingis initiated.Index searchPress INDEX + or – during stop or play mode.For Succeeding programs: Press INDEX +.For Preceding programs: Press INDEX –.(As many as 9 index points can be accessed via thismethod.)SQPB (S-VHS Quasi Playback)You can playback video cassette tapes recorded in theS-VHS system.However, the picture will not have the high resolution ofS-VHS system.Note: You cannot record S-VHS video format with this VCR.Notes:• When you record an INDEX mark at the very beginning of thetape, the mark may not be found.• During INDEX search, the tape may stop and begin to play at aslightly different location.• INDEX may not function properly with old or worn out video tapes.• INDEX marks may not be found if it is extremely close to the pointwhere the search began.• In recording, if you stop recording temporarily, the INDEX markis not recorded on the tape.Video index search systemPress CLOCK/COUNTER. The clock and tape counteralternate with each other in the display window.Notes:• If you rewind the tape beyond “00:00:00”, a minus sign (“–”)will be displayed in front of the time.• When you load a tape, the counter will reset to “00:00:00”.• The counter does not function on nonrecorded (blank)sections of the tape. When you rewind, fast forward or playtapes through blank sections, the counter stops.Clock/counter displayCOUNTERCLOCKPress VCR DVD selector. The DVD mode and theVCR mode alternate with each other in the display.DVD modeVCR mode INDEX NO. (up to 9)or is displayedSTOPVCR DVDINDEX+/–CLOCK/COUNTERWhen the INDEX + or – is pressed,the unit starts searching the INDEXNO. selected and finds the portion,then playback starts automatically.To stop the Index Search, pressSTOP. 2H20101A (E)p32-37 2/1/05, 7:53 PM33
34Recording (VCR)Recording a TV programRecording and viewing the same TV program.Recording a TV programLoad a cassette tape with the erase preventiontab intact. The DVD/VCR will automatically turn on.1Press SP/SLP to select the desired tape speedSP or SLP.The tape counter and “SP” or “SLP”will appear on the screen for about 4seconds.2Select “TV” or “CABLE” to the appropriateposition27.3TV - VHF/UHF channelsCABLE - Cable TV channelsPress Number buttons or CH +/– to select thechannel to be recorded.4Press REC/OTR. “ ” will appear on the screen for about 4 seconds and “REC” will appear on the display window.5VHF/UHF/CABLE TV CHANNELSTV CABLE TVVHF2-13UHF14-69VHF2-13STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1)100-125 (100)(125) 01 (5A)TV mode direct channel selection:All channels can be instantly selected by using twobuttons. (for example, to select channel 2, press “0”, then“2”. If you press only “2”, channel selection will be delayedfor two seconds.) For channels 10 and above, press the 2digits in order.CABLE mode direct channel selection:1-9 Press 0 twice and then 1-9 as required.Example: To select “2”, Press 002.10-12 Press 0 first and then the remaining 2 digits inorder from left to right.Example: Press 012 for “12”.13-99 Press 2 digits in order.Example: Press 22 for “22”.100-125 Press the 3 digits in order.Example: Press 110 for “110”.0–9REC/OTRCH +/–VCR DVDPreparation:• Turn ON the TV and select to the correspondingvideo input.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)SP/SLP 2H20101A (E)p32-37 2/1/05, 7:53 PM34
35Recording (VCR)Recording one program whilewatching anotherPress STOP to stop recording. “ ” will appear on screen for about 4 seconds.Press PAUSE/STEP to avoid recording unwantedmaterial. Press again to continue the recording. “ ” will appear on screen for about 4 seconds.Notes:•The pause function will be released after 5 minutes to preventdamage to the tape or the VCR. The VCR will change to theSTOP mode.• You can select a recording channel in the recording pausemode.To stop recording temporarilyWhile the VCR is recording, select your desired channelon the TV.When a TV is connected with an antenna cable only,press TV/VCR to select the TV position.The “VCR” display will go off and recording will continue.Select the TV channel you want to watch by using theTV channel selector.Note:Some Cable TV hookups do not permit viewing one channelwhile recording another. See pages 16 and 17.This VCR will automatically rewind the tape when the tapehas ended (except during OTR and timer recording). It willalso eject the tape.Auto Rewind featureTo stop recordingTV/VCRSTOPPAUSE/STEP 2H20101A (E)p32-37 2/1/05, 7:53 PM35
36Recording (VCR)One-touch Timer Recording (OTR)The One-touch Timer Recording feature provides a simple andconvenient way to make a timed recording.One-touch Timer Recording (OTR)Pressoncetwice3 times4 times5 timesNORMAL REC0:301:001:302:003:004:005:006:00NORMAL RECRecording time Press6 times7 times8 times9 times10 timesRecording timeLoad a cassette tape with the eraseprevention tab intact. The VCR will automatically turn on.1Press SP/SLP to select the desired tape speedSP or SLP.The tape counter and “SP” or “SLP”will appear on the screen for about 4seconds.2Set “TV” or “CABLE” option to theappropriate position 27.3TV - VHF/UHF channelsCABLE - Cable TV channelsPress Direct channel selection buttons (0–9) orCH +/– to select the channel to be recorded.4PressREC/OTR. Recording begins. Press thebutton again to stop recording after 30 minutes.Each additional press of REC/OTR will increaserecording time as shown in the chart below, upto a maximum of 6 hours.The OTR and recording time willappear on the screen for about 4seconds. And, “ ” will appear onthe display.5To cancel OTRPress STOP or turn off the power.“ ” will appear on screen for about 4 seconds.Note:If you wish to watch the DVD playback during OTR or standardrecording, press VCR DVD selector to change to DVD mode andperform the DVD playback 42.0–9CH +/–REC/OTRSP/SLPVCR DVDSTOPPreparation:• Turn ON the TV and select to the correspondingvideo input.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)Example: One-touch Timer Recording for 30 minutes. 2H20101A (E)p32-37 2/1/05, 7:53 PM36
37Recording (VCR)Timer recordingTimer recording can be programmed on-screen with the remote control.The built-in timer allows automatic unattended recording of up to 8programs within 1 month.Timer recordingNotes:• Press CANCEL to move cursor backward for correction.• To record from external source set the channel to “L1” or“L2”.Notes:• If the timer symbol ( ) blinks when the timer recording ended,the TV program has not been completely recorded because ofan insufficient tape length. Press TIMER REC to cancel thetimer program or press EJECT to remove the cassette tape.• During timer recording standby mode, the VCR mode cannot beoperated. To use the VCR, press TIMER REC at first, then pressVCR DVD selector to change to VCR mode. After you use theVCR, press TIMER REC again to put the VCR into timerrecording standby mode.• If you press TIMER REC during timer recording, the recordingoperation will be interrupted. If you press TIMER REC againwithin the programmed time, the recording operation will startagain.• After a power failure or disconnection of the power plug, allprogrammed recording settings and time display will be lostupon resumption of power. In this case, reset the clock 24 andreprogram any timer recording.Press VCR MENU. Select “TIMER REC SET”,then press ENTER.Preparation:• Press VCR DVD selector to select the VCR mode.• Load a cassette tape with the erase prevention tabintact.• Check the time and date are correct 24.Example: Program a timer recording for the 26th day,channel 125 (Cable TV), 11:00 - 11:30 PM on timer programnumber 1 (Tape speed: SLP).1Press SET + or – to select one of the programline, then press ENTER.2Press SET + or – to select the date, then pressENTER.3Set the start time, end time, channel and tapespeed as in step 3.4⟨+/—/ENTER/CANCEL/MENU⟩DATE START END CH———————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————26(SA)11:00PM11:30PM125SLP⟨+/—/ENTER/CANCEL/MENU⟩DATE START END CH———————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————26(SA)11:00PM11:30PM125SLPTo enter other programs, repeat step 2through 4.• To return to the normal screen,press VCR MENU twice.5Press TIMER REC. The timer symbol ( ) willappear on the display and the VCR stands byfor recording.At the same time, VCR mode willchange to DVD mode automatically.You can use DVD even if the VCR isin the timer recording mode.If you do not use the DVD, turn thepower off.6Notes:• The timer recording will start at 5 seconds before the timeyou predetermined.• If the timer symbol( ) does not appear on the display inspite of the pressing of TIMER REC, the cassette may nothave been loaded 29.• If the cassette is ejected in spite of the pressing of TIMERREC, the erase prevention tab of the cassette may havebeen removed 29.SET +/–VCR DVDENTERCANCELVCR MENUEJECT⟨ ⟩⟨+/—/ENTER/CANCEL/MENU⟩DATE START END CH———————:—— —:—— ————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ——————————:—— —:—— ———————————26(SA)TIMER REC 2H20101A (E)p32-37 2/1/05, 7:53 PM37
38Recording (VCR)Setting procedureTo set daily/weekly timerTo confirm Timer program:At step 1 on the previous page select “TIMER RECSET” and press ENTER.The timer program list will appear on the screen.2The current day (Friday) SU-SA (Sunday to Saturday)MO-SA (Monday to Saturday)MO-FR (Monday to Friday)WKL-WE WKL-TH (Weekly Thursday)(Weekly Wednesday)One month laterminus one dayWeekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA: Monday to Saturday) Timer recordingFollow the procedure of timer recording on the previouspage. At step 3 press SET + or – repeatedly until thedesired setting appears. Then press ENTER.When you press SET – repeatedly, theDATE indicator will change as follows, inthis case the day is Friday.If the programs overlap anotherDo not overlap timer programs as portions of theconflicting programs will be lost. The first recordingtime has priority over the next recording time as shownin the diagram below.Notes:• The daily/weekly recording can be made continuously until therecording is canceled or the tape reaches the end.• During timer recording the automatic rewinding mechanismdoes not function.8 : 00 11 : 009 : 00 10 : 00Program 1Prog.1Deleted PartsNon Recorded Portion PartsProg.2 Prog.3Program 2Program 3RecordingControl Settings⟨ ⟩ ⟨+/—/ENTER/CANCEL/MENU⟩DATE START END CH26(SA)11:00PM11:30PM125SLPNotes:• If there are other timer record programs remaining, TIMERREC must be pressed to reactivate the timer, otherwise theremaining timer record programs will be ignored.• You cannot confirm the Timer program during timer recordingoperation.• You can correct or cancel a programmed setting in programconfirm mode.If the Timer has been activated, press TIMERREC to deactivate the Timer.The timer symbol ( ) willdisappear. Then press VCR DVDselector to change to VCR mode.1To cancel Timer program:Press SET + or – to select the unwanted program,then press CANCEL to cancel the program.3Press VCR MENU repeatedly until the menuscreen is cleared.4Timer recording (continued)To confirm or cancel a programSET +/–ENTERVCR MENUCANCELVCR DVDTIMER REC⟨ ⟩ 2H20101A (E)p38-41 2/1/05, 7:53 PM38
39Other functions (VCR)Stereo recording and playback /Second Audio Program (SAP)When a MTS STEREO broad-cast is received, “STEREO” willappear on the screen for about 4seconds and the program canbe viewed or recorded in stereo.The Hi-Fi stereo recording pro-cedure is the same as for normalrecordings.Notes:• When playing back a tape that is not recorded in Hi-Fi stereomode, the audio will automatically be monaural.• When listening to a VHS Hi-Fi video tape or MTS broadcastthrough the VHF/UHF jack (Audio/Video cable not connected),the sound will be monaural.When viewing an MTS stereo TV program, or playing aprerecorded VHS Hi-Fi stereo videotape, press AUDIOSELECT to select how the audio will be heard throughthe speakers. Normally set to the Hi-Fi stereo position,this button can be set to the MONO position if the stereobroadcast or videotape audio is of poor quality. The “R”and “L” positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. Thisbutton has no effect when viewing a MONO videotape orTV program. Each time when you press the button,OUTPUT SELECTION display appears on the screen forseveral seconds. Refer to the chart below.Output selectionYour DVD/VCR is fitted with a SAP broadcast system whichenables you to switch to a second audio program whenviewing a selected channel.This function applies only when the program is broadcastin multi-languages through the SAP broadcast system.When the VCR is turned on or a channel selection ismade, make certain the letters “SAP” appears on thescreen for about 4 seconds. This means that the “SecondAudio Program” broadcasting is available.Listening to SAPStereo recording and playbackThe VHS Hi-Fi audio system permits high fidelity record-ing of MTS STEREO TV broadcasts.Second Audio Program (SAP)OUTPUTSELECTIONSTEREOL chR chSOUND HEARD ON BOTHSPEAKERSSTEREOLEFT CHANNEL AUDIORIGHT CHANNEL AUDIOMONOPress VCR MENU. Then press SET + or – toselect “SAP”.1Press ENTER to select “ON”.Then press VCR MENU until themenu screen is cleared.2ORSET +/–ENTERVCR MENUOther functions (VCR)Note:When using a Cable TV system, stereo TV programs maybe transmitted over a mono cable channel. In this case“STEREO” will not appear and the sound will be in mono.AUDIO SELECT 2H20101A (E)p38-41 2/1/05, 7:53 PM39
40Other functions (VCR)To AUDIO (L) OUTAUDIO/VIDEO cable (supplied)Playback VCRTo VIDEO OUT To AUDIO (R) OUTRecording VCRTo AUDIO (L) INTo VIDEO IN To AUDIO (R) INDuplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.Duplicating a video tapeFor duplicating a previously recorded tape from acamcorder, follow the camcorder manufacturer’sinstructions. A typical camcorder dubbing hookup isshown above.AUDIO/VIDEO cable (not supplied)To AUDIO (R) INTo AUDIO (L) INTo VIDEO INRecording VCRTo AV JackPlayback CamcorderConnection with second VCRConnection with CamcorderPress SP/SLP to select the desired tape speedSP or SLP. It is recommended that you set the tape speed to the SP mode on the recording VCR for best results.1Press INPUT SELECT once or twice to selectAUDIO/VIDEO input position. “L1” or “L2” will appear in the display.2Press REC/OTR on the recording VCR. The duplicating process begins.3Press PLAY on the playback VCR or Camcorder.4Press STOP after duplicating a video tape.5L1: on the rear panelL2: on the front panelPreparation:• Turn ON the TV and select the corresponding videoinput.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)• Load a cassette tape with the erase prevention tabintact.• Load a previously recorded tape into the playbackVCR or Camcorder.REC/OTRSTOPSP/SLPINPUT SELECTVCR DVD 2H20101A (E)p38-41 2/1/05, 7:53 PM40
41Other functions (VCR)Press REC/OTR to start recording.The DVD/VCR will change to theVCR mode automatically and theplayback picture or sound will beduplicated on the video cassettetape.Recording a DVD/CD discYou can record disc material in DVD, Audio CD, etc. onto a Videotape with this DVD/VCR.Duplicating a DVD or CD discPress SP/SLP to select the desired tape speedSP or SLP.Preparation:• Turn ON the TV and select the corresponding videoinput.• Press VCR DVD selector to select the VCR mode.(The VCR indicator will light.)•Load a cassette tape with the erase prevention tab intact.• Load a DVD/CD disc.1Press VCR DVD selector to select the DVD mode.The DVD indicator will light.2Press PLAY to start playback.34Press STOP if you finish recording.If you wish to stop a DVD/CD disc,press VCR DVD selector to changethe DVD mode, then press STOP.5Notes:• You may not be able to record the beginning of the disc.Begin VCR recording once program playback commenceson the DVD.• When the scanning mode is set to the progressive mode,you cannot duplicate a disc material onto a video tape.When REC/OTR is pressed, the PROGRESSIVE indicator“” on the display window will flash and “Please Set Off” will appear on the screen.• You cannot record discs encoded with copy guardfunction. The following icon and text will show up on theTV screen.SP/SLPSTOPVCR DVDPLAYDISC IS COPY PROTECTEDREC/OTR 2H20101A (E)p38-41 2/1/05, 7:53 PM41
42CAUTIONKeep your fingers well clear of the disc tray as it is closing.Neglecting to do so may cause serious personal injury.Basic playbackDisplay windowOPEN/CLOSESTOPDisc trayVCR/DVD SELECTPLAYON/STANDBYPlaying a discThis section shows you the basics on how to play a disc.Basic playback (DVD)Preparations:• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. Thismay include S-video or component video inputs which are exclusive to DVD playback.• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the inputconnected to the DVD/VCR.DVDVCDCDPress OPEN/CLOSE or PLAY on the unit.The disc tray closes automatically.On the TV-screen, “ ” changes to“Reading” and then playbackcommences.• A menu screen will appear on the TV screen, ifthe disc has a menu feature.Press / or / to select title.Press ENTER.• Title is selected and playcommences.Press STOP to end playback.• The unit records the stopped point,depending on the disc. “ ”appears on the screen. PressPLAYto resume playback (fromthe scene point).• If you press STOP again or unloadthe disc (“ ” appears on thescreen.), the unit will clear thestopped point.Press ON/STANDBY.The DVD/VCR turns on.Press VCR/DVD SELECT to select the DVD mode.The DVD indicator will light.Press OPEN/CLOSE.The disc tray opens.Place the disc on the disc tray.With the playbackside down• There are two different disc sizes. Place the discin the correct guide on the disc tray. If the disc isout of the guide, it may damage the disc andcause the DVD/VCR to malfunction.• Do not place a disc which is unplayable in thisDVD/VCR.13452678ReadingTo start playback in the stop modePress PLAY.OR 2H20101A (E)p42-45 2/1/05, 7:53 PM42
43To pause playback (still mode)Press PAUSE/STEP during playback.To resume normal playback, pressPLAY.• The sound is muted during stillmode.To stop playbackPress STOP.Notes:• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screenaccording to the type of loaded disc. In this case, check your disc again 8.• Some discs may take a minute or so to start playback.• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,“Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.•Some discs may not work the resuming facility.• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 51.• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according tothe disc contents the software producers designed, some playback features may not be available. Also refer to theinstructions supplied with the DVDs.• Do not move the unit during playback. Doing so may damage the disc.• Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause theunit to malfunction.• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit tomalfunction.• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screenmenu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to pressPOWER on your remote control once the movie is completed.• There may be a slight delay between you pressing the button and the function activating.To obtain a higher quality pictureOccasionally, some picture noise not usually visible during a normal broadcastmay appear on the TV screen while playing a DVD video disc because the highresolution pictures on these discs include a lot of information. While the amount ofnoise depends on the TV you use with this unit, you should generally reduce thesharpness adjustment on your TV when viewing DVD video discs.AboutDVD VCD CDTheDVD VCD CD icons on the heading bar show the playable discs for thefunction described under that heading.DVD : You can use this function with DVD video discs. : You can use this function with Video CDs.CD : You can use this function with Audio CDs and CD-R/RW CDs.Screen saver functionThe screen saver operates when you leave the unit inDVD stop mode for approx. five minutes.The screen will repeatedly get dark gradually and backto normal.OPEN/CLOSESTOPPAUSE/STEPPLAYTo remove the discPress OPEN/CLOSE.Remove the disc after the disc trayopens completely.Be sure to press OPEN/CLOSE to close the disc trayafter you remove the disc.POWERENTERC/D/B/APlaying a Disc while the VCR section is recordingor standing by for timer recording1) Start to record.Follow steps 1~5 on page 34.•If the DVD/VCR is standing by for recording, turn onthe DVD/VCR.2) Press VCR DVD selector to select DVD mode.3) Play a disc.Follow steps 3 ~ 5 on page 42.•Press PLAY if the DVD/VCR does not start to play adisc automatically.4) Stop to play.Press STOP to stop play back a disc.Basic playback (DVD)VCR DVD 2H20101A (E)p42-45 2/1/05, 7:53 PM43
44Playing a disc (continued)You can play discs at various speeds.Playing frame by frameBasic playback (DVD)DVDVCDDVDVCDPlaying in fast reverse or fast forward directionsPress REW or FF during playback.REW: Fast reverse playbackFF: Fast forward playbackEach time you press REW or FF, theplayback speed changes. To resume normal playbackPress PLAY.Notes:• The DVD/VCR mutes sound and subtitles during reverseand forward scan of DVD/VCD video discs. However, thisunit plays sound during fast forward or fast reverse play ofaudio CDs.• The playback speed may differ depending on the disc.Press PAUSE/STEP during still playback.Each time you press PAUSE/STEP,the picture advances one frame.To resume normal playbackPress PLAY.Note:The sound is muted during frame by frame playback.Press SLOW ( ) during playback.Each time you press the button, theslow-motion speed changes.To resume normal playbackPress PLAY.Notes:• The sound is muted during slow-motion playback.Press SKIP or repeatedly to display the chapter or track number you want.Playback starts from the selected chapter or track.To locate succeeding chapters ortracks. Playback starts from the beginning of thecurrent chapter or track.When you press twice in quick successions,playback starts from the beginning of thepreceding chapter or track.• A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature you tried is notavailable on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/VCR.• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leavethe still video image or On screen display image displayed on your TV for an extended period of time, you risk permanentdamage to your television screen. Projection televisions are very susceptible.Notes:Locating a chapter or trackPlaying in slow-motionDVDVCDCDDVDVCDCDFFREWPLAYPAUSE/STEPSKIP /SLOW 2H20101A (E)p42-45 2/1/05, 7:54 PM44
45Zooming12Press ZOOM during playback.The center part of the image will bezoomed in.Each press of ZOOM will change theZOOM 1 (x 1.3), 2 (x 1.5) and 3(x 2.0).Zooming/Locating desired sceneThis unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.Press CCCCC/DDDDD/BBBBB/A A A A A to view a different part of theframe.You may move the frame from thecentre position to UP, DOWN, LEFT orRIGHT direction.3Notes:• You can select the Pause, Slow or Search playback in the zoom mode.• Some discs may not respond to zoom feature.Locating desired sceneUse the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CDdiscs, time and track are used to locate the desired point to play back. To check the title, chapter and time, press DISPLAY.1423Note:In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC 51.C/D/B/AZOOM0–9ENTERDISPLAYCLEARSEARCHIn the zoom mode press ZOOM repeatedly toreturn to a 1:1 view ( Off).Press SEARCH during playback or stop mode.Press C C C C C or DDDDD to select the “Time”, “Title” or“Chapter”.Press Number buttons (0–9) to change thenumber.• If you input a wrong number, pressCLEAR.• Refer to the package supplied withthe disc to check the numbers.Press ENTER. Playback starts.• When you change the title,playback starts from Chapter 1of the selected title.• Some discs may not work in theabove operation.1DVDVCDCDDVDVCDCDAdvanced playback (DVD)Advanced playback (DVD)• “Time” only works in resumestop mode. 2H20101A (E)p42-45 2/1/05, 7:54 PM45
46Advanced playback (DVD)Marking the scenes Returning to the scenes1Press MARKER during playback or stop mode.213Marking desired scenesThe unit stores the points that you want to watch again up to 3 points.You can resume playback from each scene.23Notes:Some discs may not work with the marking operation.The marking is canceled when you open the disc tray or turnthe power off.Some subtitles recorded around the marker may fail toappear.•••To cancel the MarkerFollow the above steps 1~2, then press CLEAR.DVDVCDDVDVCDENTERCLEARMARKERC/DPress MARKER during playback.Select the blank Marker using C or D.Then press ENTER at the desired scene.• Repeat this procedure to set theother 2 scenes.Press MARKER to remove this display.Press ENTER.Playback starts from the markedscene.Press C or D to select the Marker 1-3. 2H20101A (E)p46-49 2/1/05, 7:54 PM46
47Repeat playback1Press PLAY MODE during playback or stop mode.Repeat playback/A-B Repeat playbackPress PLAY MODE again to make the screendisappear.3A-B Repeat playback1Press A-B RPT during playback.The start point is selected.A-B repeat playback allows you to repeat material betweentwo selected points.22DVDVCDCDANotes:• In A-B Repeat mode, subtitles near the A or B locations maynot be displayed.• You cannot set the A-B Repeat for the scenes that includemultiple angles.• A-B Repeat playback does not work when Repeat playback isactivated.• You may not be able to set A-B Repeat, during certain scenesof the DVD.• A-B Repeat does not work with an interactive DVD, MP3/WMA/JPEG CD.• A-B Repeat is prohibited when PBC is on.To resume normal playbackPress A-B RPT again.“Off” appears on the screen.ABDVDVCDCDD/B/APLAY MODEA-B RPTRepeat Off/Play ModeNotes:• Some discs may not work with the repeat operation.• In case of Video CD with PBC, repeat functions are prohib-ited during playback.[DVD]Press BBBBB/AAAAA to select “Chapter” or “Title”.The unit automatically starts repeatplayback after finishing the current ti-tle or chapter.[Audio CD, Video CD, MP3/WMA CD]Press DDDDD to select “Repeat”.Press BBBBB/AAAAA to select “Track” or “All”.The unit automatically starts repeatplayback after finishing the currenttrack.• If you set the repeat mode during stop mode,press PLAY to start Repeat playback.Press A-B RPT again.The end point is selected. Playbackstarts at the point that you selected.Playback stops at the end point, re-turns to Point A automatically, thenstarts again.To resume normal playbackSelect Repeat : “Off” in step 2.PLAYAdvanced playback (DVD)Play Mode OffRepeat Off/Play Mode 2H20101A (E)p46-49 2/1/05, 7:54 PM47
48Program playbackPress PLAY MODE during stop mode.1Press CCCCC/DDDDD/BBBBB/AAAAA to select “Program Playback”and press ENTER.The programs you selected will start to playback inthe order.•In case of JPEG file, press SKIP to continuethe program playback.•To resume normal playback, select Play Mode:“Off” in step 2.4Program playback/Random playbackYou can arrange the playback order of tracks or files on the disc. Andalso the unit selects tracks or files at random and playback them.These feature works for Audio CD, Video CD and MP3/WMA/JPEGCD.VCDCD23Random playbackVCDCDPress CCCCC/DDDDD to select Play Mode, then pressBBBBB/AAAAA to select “Random”.1Press PLAY.The Random Playback will start.32Play Mode RandomRepeat Off/Play ModeNote:In playing back the Video CD with PBC, you cannot setRandom playback.Notes:• In playing back the Video CD with PBC, you cannot setProgram playback.• The program is cancelled when you open the disc tray orturn the power off.Play Mode OffRepeat Off/Play ModeENTERC/D/B/APLAY MODEPLAY0–9CLEARAdvanced playback (DVD)■To change the program1. In the program mode, press C/D/B /A to select the tracknumber.2. Press Number buttons (0–9) to select the track numberto be replaced.■To clear the program one by oneIn the program mode, press C/D/B/A to select the tracknumber. Then press CLEAR.■To clear all the programsIn the program mode, press C/D/B/A to select “Clear”.Then press ENTER.Press CCCCC/DDDDD to select Play Mode, then pressBBBBB/AAAAA to select “Program”.Press CCCCC/DDDDD or BBBBB/AAAAA to select the programmingposition. Use Number buttons (0–9) to input thetrack or file numbers.• To program others, repeat step 3.• If you input a wrong number, pressCLEAR.Press PLAY MODE during playback or stopmode.• If you set “Random” during playback mode,Random playback will begin after the track that iscurrently being played has ended.• To resume normal playback, select Play Mode:“Off” in step 2.SKIP 2H20101A (E)p46-49 2/1/05, 7:54 PM48
49Press CCCCC/DDDDD/BBBBB/AAAAA to select the desired title.Changing angles/Title selection/DVD menuPress ANGLE during playback.The current angle will appear.When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.1Press ANGLE repeatedly until the desired angleis selected.2Note:Depending on the DVD, you may not be able to change theangles even if multi-angles are recorded on the DVD.Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.1Press ENTER or PLAY.The playback of the selected title willstart.3Note:Depending on the DVD, you may not be able to select the title.Depending on the DVD, a “title menu” may simply be called a“menu” or “title” in the instructions supplied with the disc.2Press CCCCC/DDDDD/BBBBB/AAAAA to select the desired item.Some DVDs allow you to select the disc contents using the menu.When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.1Press ENTER.The menu continues to anotherscreen. Repeat steps 2 and 3 to setthe item completely.32Press TOP MENU during playback. Title menu appears on the screen.Press MENU during playback.The DVD menu appears on the screen.• Press MENU again to resumeplayback at the scene when youpressed MENU.Note:Depending on the DVD, you may not be able to resume playbackfrom the scene point when you pressed MENU.ANGLEENTERC/D/B/ATOP MENUPLAYMENUDVD1/9DVDDVDAdvanced playback (DVD)Changing anglesTitle selectionDVD menu 2H20101A (E)p46-49 2/1/05, 7:54 PM49
50Changing soundtrack language12Press AUDIO during playback.The current soundtrack language willappear.Changing soundtrack language/Setting surround soundYou can select the language when you play a multilingual disc.Notes:• If the desired language is not heard after pressing thebutton several times, the language is not recorded onthe disc.• Changing soundtrack language is cancelled when youopen the disc tray. The initial default language or availablelanguage will be heard if the disc is played back again.In case of Video CD playbackAudio type changes as follows each time you press AUDIO.LRQSound OffLQSound OffRQSound OffQSound Off1/8 Eng Dolby Digital2/8 Fra Dolby DigitalQSound OffDVDVCDAdvanced playback (DVD) AUDIOPress AUDIO repeatedly until the desired lan-guage is selected.•The on screen display will disappear after a fewseconds.B/APress B or A to select “On”.• The on screen display will disappear after a fewseconds.1Setting surround soundThis DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.2 To cancel Surround mode:Follow the left steps 1~2, then press Bor A to select the“Off” position.Notes:• The “QSound” is effective only for the sound of disc.• The QSound setting can also be changed in the functionsetting .During disc playback press AUDIO.DVDVCDCDQSound Off1/8 Eng Dolby DigitalQSound On1/8 Eng Dolby DigitalSetting surround soundManufactured under license from QSound Labs,Inc. U.S. patent Nos. 5,105,462, 5,208,860 and5,440,638 and various foreign counterpart.Copyright QSound Labs, Inc. 1998-2002.QXpander™is a trademark of QSound Labs, Inc.All rights reserved. 2H20101A (E)p50-55 2/1/05, 7:54 PM50
51Subtitles/To turn off the PBCSUBTITLEWhen playing back a disc recorded with subtitles, you canselect the subtitle language or turn the subtitle off.To turn off the subtitle, press SUBTITLE until“Off” appears.• The on screen display will disappear after a fewseconds.1Notes:• Depending on the DVD, you may not be able to changesubtitles, or to turn subtitles on or off.• While playing a DVD, the subtitle may change when youopen or close the disc tray.• In some cases, a selected subtitle language may not bechanged immediately.OffSubtitlesPress SUBTITLE repeatedly during playbackuntil your desired language appears.1/8 Eng2DVDENTERPLAYMODEAdvanced playback (DVD)1C/D/B/A To turn off the PBCPress / to select Play Mode, then press/ to select “Off”.1Press PLAY MODE in the stop mode.2Press PLAY MODE again to make the screendisappear.3Follow the above steps 1~2, then press or to select“PBC”.Note:You can also turn off the PBC by pressing number button 1and ENTER in the stop mode.To turn on the PBC 2H20101A (E)p50-55 2/1/05, 7:54 PM51
52MP3/WMA/JPEG operationThis player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMAJPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).The Apple-HFS-System cannot be played.Note:This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannotguarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in thisowner’s manual are meant as a guide only.Please be advised that you must obtain permission from the applicable copyright owners to download copyrightedcontent, including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof.Toshiba has no right to grant and does not grant permission to download any copyrighted content.MP3/WMA/JPEG CD informationLimitations on MP3/WMA/JPEG CD playback•MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extensionletters, “mp3”, “wma”, “jpg”.•MP3/WMA/JPEG CD must be correspond to the ISO standardized files.•This unit can read 600 files per disc. If one directory has more than 600 files, it reads up to 600 files, the remainingfiles will be omitted.•The unit is able to recognize up to a maximum of 50 directories per disc.•MP3/WMA/JPEG CDs cannot be used for the purpose of recording.•If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.•It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.•Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16letters) on the screen. Long file names will be condensed.•The music files recorded by “Hierarchical File System” (HFS) cannot be played.Limitations on display•The maximum number for display is 16 letters.Available letters for display are the following:capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).•Other letters than those above are replaced in hyphen.Notes on MP3/WMA/JPEG filesTo play back MP3/WMA/JPEG CD in the recorded order,1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).3. Refrain from making too many sub-folders.CAUTION:•Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.•The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.Standard, sampling frequency, and the bit rate:MP3 CDMPEG-1 Audio32kHz, 44.1kHz, 48kHz32kbps ~ 320kbps (constant bit rate or variable bit rate)The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps ofconstant bit rate.WMA CDWMA version 7, and 832kHz, 48kbps44.1kHz, 48kbps ~ 192kbps48kHz, 128kbps ~ 192kbpsThe file recorded by mono, 48kHz, 48 kbps is not available to this unit.Advanced playback (DVD)Microsoft, Windows Media, and Windows Logo are trademarks or registered trademarks of Microsoft Corporation in both theUnited States and other countries. 2H20101A (E)p50-55 2/1/05, 7:54 PM52
53Press CCCCC/DDDDD/BBBBB/AAAAA or Number buttons (0–9) to se-lect the desired file.• In case the folder includes more than 15 files, press BBBBBor AAAAA to display next file list.• When PLAY has been pressed after displaying the filemenu, or when the disc tray has been closed usingPLAY, playback begins automatically starting from thefirst file. In this case, if the first file is an MP3/WMA file,only MP3/WMA files are played back in order. If thefirst file is a JPEG file, the first JPEG file is played back.MP3/WMA CD playbackCDENTER▲/▼//STOP0–9Notes:• During MP3/WMA/JPEG-Playback, you cannot use SEARCH,A-B Repeat functions.• You can use Repeat (Track or All), Random functions andProgram playback for MP3/WMA/JPEG CD Playback .Place a disc on which MP3 or WMA files havebeen recorded onto the disc tray.1A file menu screen will appear on the screen.Press BBBBB/AAAAA or ENTER to select folder.23Press ENTER.The selected file starts playing back.4Press STOP to end playback.• The unit records the stopped point. “ ” appears onthe screen. Press PLAY to resume playback (from thescene point).• If you press STOP again or unload the disc, the unitwill clear the stopped point.OperationMedia typeFolderFile numberElapsed time: Indicates MP3-file/0-9/Enter/Play Mode/Menu: Indicates WMA-file: Indicates JPEG-fileCDAbout file menuNotes:• The picture menu is displayed when the FUJICOLOR CDor the Kodak Picture CD are played. To display the filemenu, press TOP MENU.• In the case of a CD containing a mixture of MP3, WMA andJPEG files, the files are played back by selecting them fromthe file menu.• MP3 or WMA file on the Kodak Picture CD is not recog-nized on this unit.5PLAYTOP MENUAdvanced playback (DVD) 2H20101A (E)p50-55 2/1/05, 7:54 PM53
54TOP MENUMENU▲/▼//ENTER0–9The slide show enables you to view pictures (files) one afteranother automatically.Preparation:Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”or “15 Seconds” .Place a disc on which JPEG files have beenrecorded onto the tray.1A file menu screen will appear on the screen.Press BBBBB/AAAAA to select folder.2Press CCCCC/DDDDD/BBBBB/AAAAA or Number buttons (0–9) to se-lect the desired file.To display a picture menu, press MENU.(To return to a file menu, press TOP MENU.)Press B/A or C/D to select the desired file.3Press ENTER. The selected picture appears onthe screen.Rotating an imageYou can rotate an image by 90 degrees by pressingANGLE during playback of the image.“”, “ ”, “ ” or “ ” appears brieflyon the screen.Press STOP to end playback.The file menu appears on the screen.If you want to watch the other file, repeat steps3 ~ 4.5JPEG CD playbackSelect your desired starting file for the slideshow in the step 3 as left.2Press ENTER to start slide show from the se-lected file.•If you press PAUSE during the slide show, the slideshow stops temporary. “ 4 ” appears briefly on the pic-ture.If the picture appears upside down or sideways, pressANGLE repeatedly until it’s right side up.“”, “ ”, “ ” or “ ” appears brieflyon the screen.Press PLAY or SKIP again to resume the slide show.•When the slide show playback finished the file list ap-pears.•To stop the slide show, press STOP. The file list ap-pears.Slide show playback1• To display next list, press SKIP / .• When PLAY has been pressed after displayingthe file menu, or when the disc tray has beenclosed after pressing PLAY, playback begins au-tomatically starting from the first file. In this case,if the first file is a JPEG file, the first JPEG file isplayed back. If the first file is an MP3/WMA file,only MP3/WMA files are played back in order.ANGLEPLAYSTOPSKIP/PAUSE4CD CDAdvanced playback (DVD)MP3/WMA/JPEG operation (continued) 2H20101A (E)p50-55 2/1/05, 7:54 PM54
55Setting procedurePress SETUP during stop mode.The following on-screen displayappears.123To make SETUP screen disappear, pressSETUP or RETURN.5Customizing the function settingsYou can change the default settings to customize performanceto your preference.ENTERC/D/B/A•Repeat steps 3 and 4 to changeother settings.•To select another operation, goback to step 2 by pressing Crepeatedly.Function setup (DVD)Press Bor A to select the desired section, thenpress D or ENTER.Press Cor D to select the desired option.4Change the selection using B or A, by referringto the corresponding pages 57~59.SETUPDVDVCDCD/Enter/Setup/ReturnRETURNFunction setup (DVD) 2H20101A (E)p50-55 2/1/05, 7:55 PM55
56Section OptionMenuSubtitleAudioE.B.L.Tv ScreenDisplayPicture ModeJPEG IntervalDialogueQSoundPasswordParentalSelect FilesOutputDetailsTo select the language of “Menu”, “Subtitle” and“Audio” if more than one language are available onthe disc.To select On or Off for E.B.L. (Enhanced BlackLevel).To select a picture size according to the aspectratio of your TV.To turn on or de-activate the operational status dis-play on the screen.To select a preferred picture mode from “Video”,“Film” or “Auto”.To select a preferred setting for the slide show play-back.To select On or Off for DRC (Dynamic Range Con-trol).To select On or Off for QSound.Input 4-digit password to set the parental level.To select a preferred parental level for the parentalsetting.To select a preferred file type for playing back a CDcontaining a mixture of file types.To select a preferred video output signal from “Pro-gressive” or “Interlace”.Page575757575858585859Customizing the function settings (continued)Setting detailsFunction setup 2H20101A (E)p56-59 2/1/05, 7:55 PM56
57Function setup (DVD)Menu, Subtitle, AudioYou can select the language of “Menu”, “Subtitle” and“Audio” if more than one languages are recorded ontothe disc.English, Francais, Espanol:The selected language will be heard or seen.Other:Other language can be selected (see the“Language code list” ).Original: (Audio)The unit will select the first priority language ofeach disc.Off: (Subtitle)Subtitles do not appear.Notes:• If the selected language is not recorded on the disc, thefirst-priority language is selected.• If you want to change the OSD language, you can performit by TV MENU .E.B.L.To select the black level of playback pictures, set yourpreference and monitor’s ability.On: Enhanced grey scale (0 IRE cut off)Off: Standard grey scale (7.5 IRE cut off)Tv ScreenYou have the following screen sizes to choose from:4:3 (Letter box):Select this mode when connecting to a conventional TV. When playing back a wide screen-DVDdisc, it displays the wide picture with black bandsat the top and bottom of screen.4:3 (Pan scan):It displays the wide picture on the whole screenwith left and right edges automatically cut off.16:9 (Wide):Select this mode when connecting to a wide-screen TV. A wide screen picture is displayed fullsize.Press OPEN/CLOSE to view in the selected screen size.Note:If the DVD disc is not formatted in the pan & scan style, itdisplays 4:3 style.DisplayOn screen display can be switched on or off when youpress the buttons.On: On screen displays appear when you pressthe buttons (factory setting).Off: On screen displays do not appear when youpress any buttons.E.B.LTv ScreenDisplayPicture Mode4:3OnAutoJPEG Interval Off/Setup/ReturnOff 2H20101A (E)p56-59 2/1/05, 7:55 PM57
58JPEG IntervalYou can continuously play back all JPEG files automati-cally.After the setting below, start playing the disc on whichJPEG files have been recorded.Off:Plays back one file at a time.5 Seconds:Plays back images in the form of a slide show at5 second intervals.10 Seconds:Plays back images in the form of a slide show at10 second intervals.15 Seconds:Plays back images in the form of a slide show in15 second intervals.Customizing the function settings (continued)Picture ModeThere are two types of source content in picturesrecorded in DVD video discs: film content (picturesrecorded from films at 24 frames per second) andvideo content (video signals recorded at 30 frames persecond). Make this selection according to the type ofcontent being viewed.Auto: Select this position normally.The DVD player automatically detectssource content, film or video, ofplayback source, and converts thatsignal in the progressive output formatin an appropriate method.Film: The DVD player converts film contentpictures in the progressive outputformat appropriately. Suitable forplayback of film content pictures. Theprogressive output feature will be mosteffective under this selection.Video: The DVD player filters video signal,andconverts it in the progressiveoutput formatappropriately.Suitable for playback of video contentpictures.Note:Depending on the disc, pictures may be cut off ordoubled. In this case, select “Video”.Setting detailsFunction setup (DVD)QSoundThis DVD video player equipped with a “QSound”. It canproduce the effect of being in a cinema or a concert hall.On: The QSound operates.Off: The QSound is disengaged.DialogueQSound Off/Setup/ReturnOff: DRC (Std)On: DRC (TV):Loud sound such as explosion or similar is toneddown slightly when played back. This makes itsuitable for when it is connected to a stereo.Off: DRC (Std):It plays back at the recording level on the disc.Notes:• This function works only during playback of Dolby Digitalrecorded discs.• The level of Dynamic Range Reduction may differdepending on DVD video disc.DialogueDRC (Dynamic Range Control) enables you to controlthe dynamic range so as to achieve a suitable sound foryour equipment.Note:The QSound setting can also be changed with AUDIO onthe remote control . 2H20101A (E)p56-59 2/1/05, 7:55 PM58
59Function setup (DVD)To change the parental level1) Press C or D to select “Password”.2) Press Number buttons (0–9) to enter the passwordyou have stored.3) Press ENTER.• The rating is now unlocked.4) Press C or D to select “Parental”, then press Bor A to change the parental level.5) Press C or D to select “Password”, then pressNumber buttons (0–9) to enter the password.Note: You can change the password if you want.6) Press ENTER.Now the parental level is changed and locked.If you forget the password...1. Press OPEN/CLOSE to open the disc tray.2. Remove the disc.3. Press OPEN/CLOSE again to close the disc tray.“No Disc” appears on the screen.Select FilesWhen playing back a CD containing a mixture of MP3,WMA and JPEG files, only MP3/WMA or JPEG files canbe displayed on the file menu.All:Displays all files.Music Only:Displays only MP3/WMA files.Pictures Only:Displays only JPEG files.OutputYou can select the video output signal of the DVDvideo player to the TV from “Interlace” or “Progres-sive”.1) Press C or D to select “Output”.2) Press A, then press C or D to select “Interlace” or“Progressive”.Interlace:Select when connecting to a composite TV ora TV equipped with component video inputsbut progressive scan is not compatible.Progressive:Select when connecting to a TV equippedwith component video inputs, progressivescan compatible.3) Press ENTER.Warning:Once “Progressive” is selected when connecting to aTV progressive scan incompatible, no image will beseen on the video display.In this case, you must reset the unit by pressing STOPon the front panel for five seconds. The video outputwill be restored to “Interlace” setting, and a picture willonce again be seen on a conventional analog display.Notes:• Some discs may not be played back with the progressivescanning mode correctly because of the disc characteris-tics or recording condition.• Once Progressive scan on, all other video outputs aredisabled except component video outputs. Parental control settingSome discs are specified not suitable for children. Suchdiscs can be limited not to play back with the unit.1) Press C or D to select “Parental”, then press Bor A until the level you require appears.•Level Off: The parental control setting does notfunction.•Level 8: All DVD software can be played back.•Level 1: DVD software for adults cannot beplayed back.Select from the level 1 to level 8. The limitation willbe more severe as the level number is lower.2) Press C or D to select “Password”.Press Number buttons (0–9) to input a 4-digitpassword. Be sure to remember this number!•If you input a wrong number, press CLEAR.3) Press ENTER to store the password.Note: Now the rating is locked and the setting can-not be changed unless you enter the correct password.4) Press OPEN/CLOSE to activate Parental controlsetting. (See “Temporary disabling of rating level byDVD disc” .)Notes:• Depending on the discs, the unit cannot limit playback.• Some discs may not be encoded with specific ratinglevel information though its disc jacket says “adult.” Forthose discs, the age restriction will not work.Note:If each setup (pages 57~59) has been completed, the unitcan always be worked under the same conditions (espe-cially with DVD discs).Each setup will be retained in the memory even if you turnthe power off.4. While holding STOP down on the front panel,press 7 on the remote control. “PASSWORDCLEAR” appears on the screen.5. Enter a new password again. 2H20101A (E)p56-59 2/1/05, 7:55 PM59
60Temporary disabling of rating level by DVD discDepending on the DVD disc, the disc may try to temporarily cancel the ratinglevel that you have set.It is up to you to decide whether to cancel the rating level or not.Load a DVD disc and press PLAY or OPEN/CLOSE on the unit .Note:This temporary cancellation of rating level will be kept until thedisc is ejected.When the disc is ejected, the original rating level will be set againautomatically.1Playback will commence if the entered pass-word was correct.42Your disc exceedsthe parental control level#.Parental Control LevelCancel Picture/Enter/Return35ReadingENTER▲/▼RETURNPLAY0–9OPEN/CLOSEIf the DVD disc has been designed to temporarilycancel the Rating level, the screen which followsthe “Reading” screen will change, depending onwhich disc is played. If you select “YES” with theENTER key, “Your disc exceeds the parentalcontrol level#.” screen will then appear.If you wish to cancel the set rating level temporar-ily, select “Parental Control Level” with C C C C C or DDDDD, thenpress ENTER. If the 4-digit password at step 2 onpage 59 has been set, the password entering screenwill appear as shown in step 4.Alternatively, if the password has not been set, play-back will commence. If you don’t know (or haveforgotten) the password, select “Cancel Picture”.The setting screen will disappear. Press OPEN/CLOSE to remove the disc.Enter the password with Number buttons (0–9).Then press ENTER.To exit from the entry, press RETURN.Function setup (DVD) 2H20101A (E)p60-63 2/1/05, 7:55 PM60
61Language code listEnter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” .Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925Amharic 1123 Galician 1722 Malay 2329 Spanish 1529Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931Armenian 1835 German 1415 Maltese 2330 Swahili 2933Assamese 1129 Greek 1522 Maori 2319 Swedish 2932Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022Azerbaijani 1136 Guarani 1724 Moldavian 2325 Tajik 3017Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019Bulgarian 1217 Indonesian 1924 Pashto, Pushto 2629 Tonga 3025Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033Catalan 1311 Japanese 2011 Quechua 2731 Ukrainian 3121Chinese 3618 Javanese 2033Rhaeto-Romance2823 Urdu 3128Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219Czech 1329 Kazakh 2121 Samoan 2923 Volapük 3225Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525Faroese 1625 Latvian, Lettish 2232 Sindhi 2914 Zulu 3631Language Name Code Language Name Code Language Name Code Language Name CodeOthers 2H20101A (E)p60-63 2/1/05, 7:55 PM61
62TroubleshootingBefore calling a service technician, please check the following table for a possible cause of the symptoms and some solutions.Symptoms Solutions• Make sure the power cord is plugged in.• Try another AC outlet.• Unplug unit, then plug it back in.• Select the DVD or VCR mode before operating.DVD/VCR does not operate.DVD/VCRPage5–530,42The remote control does not function.• Aim the remote control at the remote sensor.• Operate within Approx. 7 Meters or reduce the light in the room.• Clear the path of the beam.• The batteries are weak. Replace the batteries.• Check the batteries are inserted correctly.13DVDNo picture.• Antenna connection is not correct or antenna cable is disconnected.• The video channel is not in the correct position or the TV is not set to the videochannel 3 or 4.• Check the unit is connected correctly.• The video input selector of the TV is not set to VIDEO. Set to VIDEO (orequivalent).• Channel is set to the external mode.No sound. • Check the unit is connected correctly.• Check the input selector of the amplifier is set properly.• The unit is in the Special playback mode.14~172214~19––14~19–31,44• Select proper language in the menu options.Display is not shown in your language. 57Playback doesn’t start. • No disc is inserted.• The disc may be dirty. Clean up the disc.• The unit cannot play DVD-ROMs, etc.Stopping playback, slow-motion play, repeatplay, or memory play, etc. cannot beperformed. • Some discs may not do some of the functions.4278–No Cable TV reception. • Check all Cable TV connections.• Station or Cable TV system problems, try another station. 16,17Noise bars on screen.• Tracking adjustment beyond range of automatic tracking circuit. Try Manualtracking adjustment.• Video heads are dirty.• The tape is worn or damaged.VCR• The erase prevention tab of the video cassette is broken off.• The unit is in the external input mode.TV recording does not work. 29,34Timer recording does not work. • The time is not set correctly.• The recording start/end time is not set correctly.• The TIMER REC has not been pressed ( is not lit).2437373131–No picture, or the screen is blurred or dividedinto two parts.• The PROGRESSIVE scan is “On” although the unit is connected to a TVvia the VIDEO OUT or the S-VIDEO OUT jack. 59No subtitle. • Some discs have no subtitles.• Subtitles are cleared. Press SUBTITLE.Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.• The function is prohibited with the unit or the disc. appears on the screen.514944No 4:3 (16:9) picture. • The setup does not match your TV.No on-screen display. • Select Display “On”.5757No surround sound. • The setup does not match your stereo system.The unit or remote operation key is notfunctioning. • Turn off the unit and unplug the AC power cord for several minutes, then replug it.20Playback does not start when the title isselected. • Check the Parental setup.Audio soundtrack and/or subtitle languageis not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc.–59,6050,51Others 2H20101A (E)p60-63 2/1/05, 7:55 PM62
63SpecificationsAC 120 V 60 HzOperation: 18 W, Stand by: 2 W7.7 lbs (3.5 kg)Width: 16-15/16 inches (430 mm)Height: 3-1/2 inches (89.5 mm)Depth: 9-1/16 inches (230 mm)181 channel freq. synthesizedVHF 2-13UHF 14-69Cable TV 113 ChannelsUHF/VHF In/Out: 75 Ω coaxialChannel 3 or 4, SwitchableNTSC4 Rotary headsHi-Fi sound - 2 Tracks / MONO sound - 1 Track20 Hz to 20,000 HzMore than 90dBApprox. 1 minute and 48 seconds (with T-120 Cassette Tape)DVD (12 cm, 8 cm), CD (12 cm, 8 cm)DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz90dB (DVD)0.02% (DVD)Less than 0.01% WrmsTemperature: 5˚C-40˚C (41˚F-104˚F), Operating status: HorizontalPower supplyPower consumptionWeightDimensionsTunerAntenna input/outputRF channel outputColor systemVideo headAudio trackHi-Fi frequency responseHi-Fi dynamic rangeFF/REW time at 25˚C (77˚F)Applicable discFrequency rangeS/N ratioHarmonic distortionWow and flutterOperating conditionsGeneralInput/OutputDVD/VCRVideo input 1.0 V (p-p), 75 Ω, negative sync., pin jack x 2Video output 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1Audio input –8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 2Audio output –8 dBm, 1 kΩ, negative sync., pin jack (L/R) x 1DVDS-video output (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1(C) 0.286 V (p-p), 75 ΩComponent video output (Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2Audio output (BITSTREAM/PCM 0.5 V (p-p), 75 Ω, pin jack x 1COAXIAL)Audio output (ANALOG) –12 dBm, 1 kΩ, pin jacks (L, R) x 1Supplied accessoriesAudio/video cable ................................................. 1Remote control (SE-R0170) ................................. 1Batteries (R03/AAA) ............................................. 275 Ω coaxial cable ................................................ 1• This model complies with the above specifications.• Designs and specifications are subject to change without notice.• This model may not be compatible with features and/or specifications that may be added in the future.Others 2H20101A (E)p60-63 2/1/05, 7:55 PM63
64OthersLimited warrantyLimited United States WarrantyDVD Players - Exchange WarrantyToshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to originalconsumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CON-SUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGI-NAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUD-ING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.Limited Ninety (90) Day WarrantyTACP warrants this DVD Player and its parts againstdefects in materials or workmanship for period of ninety(90) days after the date of original retail purchase.DURING THE FIRST NINETY (90) DAYS AFTER THEDATE OF ORIGINAL RETAIL PURCHASE, TACPWILL EXCHANGE A DEFECTIVE DVD PLAYERWITH A NEW OR REFURBISHED DVD PLAYERWITHOUT CHARGE TO YOU. YOU MUST CONTACTTACP'S CONSUMER SOLUTIONS CENTER FORINSTRUCTIONS ON HOW TO PROCESS YOUR INWARRANTY EXCHANGE REQUEST. THE CON-SUMER IS RESPONSIBLE FOR ALL INBOUNDTRANSPORTATION AND INSURANCE CHARGESFOR THE DVD PLAYER TO THE EXCHANGECENTER. DURING THE PERIOD THAT COM-MENCES ON THE DATE THAT IS NINETY ONE (91)DAYS AFTER THE DATE OF ORIGINAL RETAILPURCHASE AND BEYOND, TACP WILL EXCHANGEA DEFECTIVE DVD PLAYER WITH A NEW ORREFURBISHED DVD PLAYER FOR A NOMINALFEE. YOU MUST CONTACT TACP'S CONSUMERSOLUTIONS CENTER FOR INSTRUCTIONS ONHOW TO PROCESS YOUR EXCHANGE REQUEST.THE CONSUMER IS RESPONSIBLE FOR ALLINBOUND TRANSPORTATION AND INSURANCECHARGES FOR THE DVD PLAYER TO THE EX-CHANGE CENTER.* Rental UnitsThe warranty for rental units begins with the first rentalor thirty (30) days after the date of shipment to therental firm, whichever comes first.* Commercial UnitsDVD Players sold and used for commercial purposeshave a limited ninety (90) day warranty for all parts andlabor.Owner's Manual and Product Registration CardRead this owner’s manual thoroughly before operat-ing this DVD Player. Complete and mail the enclosedproduct registration card or register your product on-line at www.tacp.toshiba.com/service as soon aspossible. By registering your DVD Player you willenable TACP to bring you new products specificallydesigned to meet your needs and help us to contactyou in the unlikely event that a safety notification isrequired under the Consumer Product Safety Act.Failure to complete and return the product registra-tion card does not diminish your warranty rights.Your ResponsibilityTHE ABOVE WARRANTIES ARE SUBJECT TOTHE FOLLOWING CONDITIONS:(1) You must retain your bill of sale or provide otherproof of purchase.(2) All warranty servicing of this product must bemade by an Authorized TACP Service Station.(3) The warranties from TACP are effective only ifthe product is purchased and operated in theContinental U.S.A. or Puerto Rico.(4) Labor service charges for set installation, setup,adjustment of customer controls and installationor repair of antenna systems are not covered bythis warranty. Reception problems caused byinadequate antenna systems are your responsi-bility.(5) Warranties extend only to defects in materials orworkmanship as limited above, and do notextend to any DVD Player or parts that havebeen lost or discarded by you or to damage tothe DVD Player or parts caused by fires, misuse,accident, Acts of God (such as lightning orfluctuations in electric power), improper installa-tion, improper maintenance, or use in violation ofinstructions furnished by TACP; use or malfunc-tion through simultaneous use of this productand connected equipment; or to units that havebeen modified or had the serial number re-moved, altered, defaced, or rendered illegible. 2H20101A (E)p64-BACK 2/1/05, 7:55 PM64
65OthersHow to Obtain Warranty ServicesIf, after following all of the operating instructions in thismanual and checking the section "Troubleshooting,"you fund that service is needed:(1) For instructions on how to obtain warranty servicefor exchange program DVD Players, contactTACP's Call Center toll free at 1-866-583-7353.(2) You must include the original bill of sale (or a copyof the original bill of sale) or other proof of pur-chase along with the entire DVD Player whensending the DVD Player to the Authorized TACPService Station specified by TACP's Call Center.You must pay for all transportation and insurancecharges for the DVD Player to and from theAuthorized TACP Service Station.For additional information, visit TACP's website:www.tacp.toshiba.comALL WARRANTIES IMPLIED BY THE LAW OF ANYSTATE OF THE U.S.A., INCLUDING THE IMPLIEDWARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE, AREEXPRESSLY LIMITED TO THE DURATION OF THELIMITED WARRANTIES SET FORTH ABOVE. WITHTHE EXCEPTION OF ANY WARRANTIES IMPLIEDBY THE LAW OF ANY STATE OF THE U.S.A. ASHEREBY LIMITED, THE FOREGOING WARRANTYIS EXCLUSIVE AND IN LIEU OF ALL OTHERWARRANTIES, GUARANTEES, AGREEMENTS,AND SIMILAR OBLIGATIONS OF TACP WITHRESPECT TO THE REPAIR OR REPLACEMENT OFANY PARTS. IN NO EVENT SHALL TACP BELIABLE FOR CONSEQUENTIAL OR INCIDENTALDAMAGES (INCLUDING, BUT NOT LIMITED TO,LOST PROFITS, BUSINESS INTERRUPTION, ORMODIFICATION OR ERASURE OF RECORDEDDATA CAUSED BY USE, MISUSE OR INABILITY TOUSE THIS PRODUCT).No person, agent, distributor, dealer or company isauthorized to change, modify or extend the terms ofthese warranties in any manner whatsoever. The timewithin which an action must be commenced to enforceany obligation of TACP arising under the warranty orunder any statute, or law of the United States or anystate thereof, is hereby limited to ninety (90) days fromthe date you discover or should have discovered, thedefect. This limitation does not apply to impliedwarranties arising under state law.THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS AND YOU MAY ALSO HAVE OTHERRIGHTS WHICH MAY VARY FROM STATE TOSTATE IN THE U.S.A. SOME STATES OF THEU.S.A. DO NOT ALLOW LIMITATIONS ON HOWLONG AN IMPLIED WARRANTY LASTS, WHEN ANACTION MAY BE BROUGHT, OR THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSEQUEN-TIAL DAMAGES, SO THE ABOVE PROVISIONSMAY NOT APPLY TO YOU UNDER SUCH CIRCUM-STANCES. 2H20101A (E)p64-BACK 2/1/05, 7:55 PM65
66Others..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Memo 2H20101A (E)p64-BACK 2/1/05, 7:55 PM66
67Others..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Memo 2H20101A (E)p64-BACK 2/1/05, 7:55 PM67
Printed in Thailand 2H20101A (E)p64-BACK 2/1/05, 7:55 PM68

Navigation menu