ORION ELECTRIC M2F4B DVD/VCR TV Interface Device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	564907
Application ID	3jw/spPnpHxGvRZDJPww9g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	261.04kB (3263006 bits)
Date Submitted	2005-07-22 00:00:00
Date Available	2005-07-22 00:00:00
Creation Date	2005-06-30 01:54:18
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-06-30 10:56:49
Document Title	Users Manual

DRAFT
Introduction
Connections
DIGITAL VIDEO
DVD VIDEO PLAYER & VIDEO
CASSETTE RECORDER
SD-V393SU2
OWNER’S MANUAL
This device does not tape-record copy protected DVD Video Discs.
2H20101A (E)COV
2/1/05, 7:51 PM
14
Basic setup
(VCR)
22
Playback
(VCR)
29
Recording
(VCR)
34
Other functions
(VCR)
39
Basic playback
(DVD)
42
Advanced
playback
(DVD)
45
Function setup
(DVD)
55
Others
©2005 Toshiba Corporation
61
Introduction
IMPORTANT SAFEGUARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain
or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN
FCC NOTICE:
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the
FCC Rules could void the user's authority to operate this equipment.
CAUTION: THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
DO NOT STARE INTO BEAM.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
2H20101A (E)p02-13
2/1/05, 7:51 PM
IMPORTANT SAFEGUARDS
Introduction
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a soft dry cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3125A
to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and/or the manufacturer’s instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
2H20101A (E)p02-13
2/1/05, 7:51 PM
Introduction
IMPORTANT SAFEGUARDS
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,
as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions, as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f . When the unit exhibits a distinct change in performance, this indicates a need for service.
2H20101A (E)p02-13
2/1/05, 7:51 PM
IMPORTANT SAFEGUARDS / Power source
Introduction
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
21. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
22. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
23. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other
equipment carefully and follow the instructions when making any connections.
24. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.
25. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
26. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Power source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
Notes:
• Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
2H20101A (E)p02-13
2/1/05, 7:51 PM
Introduction
Precautions
Notes on handling
When shipping the DVD/VCR, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD/VCR. Do not leave rubber or plastic
products to contact the DVD/VCR for a prolonged
period. They will leave marks on the finish.
The top and rear panels of the DVD/VCR may
become warm after a long period of use. This is not a
malfunction.
When the DVD/VCR is not in use, be sure to remove
the disc and the video cassette turn off the power.
If you do not use the DVD/VCR for a long period, the
unit may not function properly in the future. Turn on
and use the DVD/VCR occasionally.
Notes on locating
Place the DVD/VCR on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc or the video
tape may become dis-aligned and damage the DVD/
VCR.
When you place this DVD/VCR near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD/
VCR away from the TV, radio, or VCR.
Notes on moisture condensation
Moisture condensation damages the DVD/VCR.
Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the head drum or the optical
pick-up lens inside this unit, one of the most crucial
internal parts of the DVD/VCR.
le of mo
Examp ensat isture
ion!
cond
Tape
Head drum
Moisture condensation occurs during the
following cases.
When you bring the DVD/VCR directly from a cold
place to a warm place.
When you use the DVD/VCR in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD/VCR in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD/VCR in a humid place.
It’s too
warm!
Notes on cleaning
Use a soft, dry cloth for cleaning.
Use a dry cloth to wipe.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the
DVD/VCR.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Do not use the DVD/VCR when moisture
condensation may occur.
If you use the DVD/VCR in such a situation, it may
damage discs and internal parts. Remove the disc or
the video tape, connect the power cord of the DVD/
VCR to the wall outlet, turn on the DVD/VCR, and
leave it for two or three hours. After two or three
hours, the DVD/VCR will have warmed up and
evaporated any moisture. Keep the DVD/VCR
connected to the wall outlet and moisture
condensation will seldom occur.
Wa
it!
2H20101A (E)p02-13
2/1/05, 7:51 PM
Wall outlet
Notes on discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. VIDEO CDs and
audio CDs are divided into tracks.
Introduction
On handling discs
DVD video disc
DVD video disc
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
This device does not tape-record copy protected DVD
Video Discs.
The device is not to be used for copying copyrighted
content without the express written permission of the
copyright owner.
Obtaining such permission is the sole responsibility of
the user.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
2H20101A (E)p02-13
2/1/05, 7:51 PM
Introduction
Notes on discs (continued)
About this owner’s manual
This owner’s manual explains the basic instructions of
this DVD/VCR. Some DVD video discs are produced in
a manner that allows specific or limited operation during
playback. As such, the DVD/VCR may not respond to all
operating commands. This is not a defect in the DVD/
VCR. Refer to instruction notes of discs.
Playable discs
This DVD/VCR can play the following discs.
Disc Mark
Contents
Disc
Size
Maximum
playback time
Approx. 4 hours
(single sided disc)
12 cm
” may appear on the TV screen during operation.
“
” means that the operation is not permitted by the
A“
DVD/VCR or the disc.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
” may
STOP ( ) button is pressed. Alternatively, the “
also indicate that the feature is not available for the disc.
Audio
Video
(moving
pictures)
DVD
video
discs
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Notes on region numbers
The region number of this DVD/VCR is 1. If region
numbers, which stand for their playable area, are printed
on your DVD video disc and you do not find 1 or ALL ,
disc playback will not be allowed by the player. (In this
case, the DVD/VCR will display a message on-screen.)
Video
CDs
DIGITAL VIDEO
Audio
Video
(moving
pictures)
On Video CDs
This DVD/VCR supports Video CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD/VCR in
the same way as an audio CD.
• Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
Audio
The following discs are also available.
DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, SVCD,
MP3, WMA or JPEG format
Kodak Picture CD and FUJICOLOR CD format
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM, Photo
CD, etc., or non standardized discs even if they may
be labeled as above.
• Some CD-R/RWs cannot be played back depending
on the recording conditions.
• This DVD/VCR uses the NTSC color system, and
cannot play DVD video discs recorded in any other
color system (PAL, SECAM, etc.).
Because of problems and errors that can occur
during the creation of DVD software and/or the
manufacture of DVD discs, Toshiba America
Consumer Products, L.L.C. and Toshiba of Canada,
Ltd. cannot guarantee that this player will play every
feature of every DVD bearing the DVD logo.
As one of the creators of DVD technology, Toshiba
DVD players are manufactured to the highest
standards of quality and, as a result, such
incompatibilities are very rare. If you happen to
experience and difficulty playing a DVD on a Toshiba
DVD player, please feel free to call our Contact listed
in “How to Obtain Warranty Services” (page 65).
2H20101A (E)p02-13
Audio
CDs
12 cm
2/1/05, 7:51 PM
Contents
Basic playback (DVD)
IMPORTANT SAFEGUARDS .......................... 2
Power source ................................................... 5
Precautions ...................................................... 6
Notes on discs .................................................. 7
Contents. .......................................................... 9
Identification of controls ................................. 10
Playing a disc ................................................. 42
Connections
Antenna connections ...................................... 14
Cable TV connections .................................... 16
Connecting to a TV ........................................ 18
Connecting to optional equipment .................. 20
Basic setup (VCR)
Setting the video channel ............................... 22
Setting the language ...................................... 23
Clock setting ................................................... 24
Tuner setting .................................................. 27
Advanced playback (DVD)
Zooming ......................................................... 45
Locating desired scene .................................. 45
Marking desired scenes ................................. 46
Repeat playback ............................................. 47
A-B Repeat playback ...................................... 47
Program playback .......................................... 48
Random playback........................................... 48
Changing angles ............................................ 49
Title selection ................................................. 49
DVD menu ...................................................... 49
Changing soundtrack language ..................... 50
Setting surround sound .................................. 50
Subtitles ......................................................... 51
To turn off the PBC ......................................... 51
MP3/WMA/JPEG operation ............................ 52
Introduction
Introduction
Function setup (DVD)
Playback (VCR)
Loading and unloading a cassette tape ......... 29
Cassette tape playback .................................. 30
Special playback ............................................ 31
Convenience function ..................................... 32
Recording (VCR)
Recording a TV program ................................ 34
One-touch Timer Recording (OTR) ................ 36
Timer recording .............................................. 37
Customizing the function settings .................. 55
Temporary disabling of rating level by
DVD disc ........................................................ 60
Others
Language code list ......................................... 61
Troubleshooting ............................................. 62
Specifications ................................................. 63
Limited warranty ............................................. 64
Other functions (VCR)
Stereo recording and playback ...................... 39
Second Audio Program (SAP) ........................ 39
Duplicating a video tape ................................. 40
Recording a DVD/CD disc .............................. 41
2H20101A (E)p02-13
2/1/05, 7:51 PM
Introduction
Identification of controls
See the page in
for details.
Front panel
OPEN/CLOSE button 42
Cassette loading slot 29
DVD indicator 42
ON/STANDBY button 22
REC button 34
EJECT
button 29
Disc tray 42
Remote sensor 13
VCR/DVD mode selector
button 22
VCR indicator 22
CHANNEL
REW button 30
buttons 34
STOP button 30
Display window 11
AUDIO (L/R)/VIDEO IN
(LINE IN 2) jacks 40
FWD button 30
PLAY button 30
Rear panel
DVD COAXIAL DIGITAL AUDIO OUT jack 20
DVD S-VIDEO OUT jack 19
AC power cord
DVD/VCR common AUDIO
(L/R)/VIDEO OUT jacks 18
DVD COMPONENT DVD AUDIO (L/R)
OUT jacks 19
OUT jacks 19
AUDIO (L/R)/VIDEO
IN (LINE IN1) jacks 40
10
2H20101A (E)p02-13
ANT IN jack 14
10
2/1/05, 7:51 PM
ANT OUT jack 14
Display window
VCR indicator (VCR)
Still indicator
Introduction
Play indicator
Disc inserted indicator (DVD)
Recording
indicator (VCR)
Disc inserted
indicator (CD)
AM/PM indicator
(AM is not displayed)
Multifunctional indicator
Track indicator (CD)
Progressive indicator
Tape loaded indicator (VCR)
Timer Recording indicator (VCR)
VCR operation status
Press CALL to display VCR operation status on the screen.
To cancel the display, press CALL again.
While watching TV
HI-FI STEREO
DAY OF THE WEEK
CLOCK
STEREO AND
SECOND
AUDIO
PROGRAM
(SAP)
VCR Icons
While operating a tape
8 : 47AM MON
STEREO SAP
CH 125
CHANNEL
Recording :
OPERATING
MODE
8 : 30AM MON
HI-FI
Rec/Pause :
Play :
AUTO REPEAT
00 : 00 : 00 SP
TAPE SPEED
REAL TIME COUNTER
STEREO
00 : 15 : 12 SP
TAPE IN
Stop :
Eject :
OUTPUT SELECTION
DVD/CD/VCD operation status
Each press of DISPLAY, the status display of the disc will appear on the screen and change as follows.
DISC OPERATION
DVD
00:34:56 01:12:33
ELAPSED
TIME
TOTAL
TIME
TITLE NO.
00:34:56 01:12:33
Title
1/99 Chapter 1/999
1/9
1/8 Eng DolbyDigital
1/32 Eng
ANGLE NO.
CHAPTER NO.
A KIND OF AUDIO
AUDIO LANGUAGE
SUBTITLE LANGUAGE
DISC
OPERATION
TRACK NO.
CD/VCD
34:56
Track 11/99
71:33
TOTAL
TIME
ELAPSED TIME
11
2H20101A (E)p02-13
11
2/1/05, 7:51 PM
Introduction
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
POWER button
VCR DVD button
EJECT button (VCR)
CLOCK/COUNTER button
VCR MENU button
SETUP button
CM SKIP button
ZOOM button
TOP MENU button
Direction buttons ( / / / )
SET+/Ð buttons
CH+/Ð buttons
CANCEL button
CLEAR button
STOP button !
!!
##
!
"#
"'
"#
!"
"#
PAUSE/STEP button ! "!
INDEXÐ button !!
SKIP button ""
REW button !
REC/OTR button !"
TIMER REC button
Direct channel
selection buttons (0Ð9)
Number buttons (0Ð9)
""
!$
!%
"#
COUNTER RESET button !
ANGLE button "'
ATR button !
SUBTITLE button #
OPEN/CLOSE button (DVD) "
TV/VCR button
INPUT SELECT button "
SLOW button ! ""
MENU button "'
ENTER button ! ##
RETURN button ##
PLAY button ! "
INDEX+ button !!
button ""
SKIP
FF button ! ""
A-B RPT button "%
SP/SLP button !"
PLAYMODE button "%
CALL button 
DISPLAY button 
ZERO RETURN button !
SEARCH button "#
MARKER button "$
AUDIO SELECT button !'
AUDIO button #
MENU button
Use the MENU button to display the menu included on
many DVD video discs. To operate a menu, follow the
instructions in “DVD Menu.” 49
12
2H20101A (E)p02-13
12
2/1/05, 7:51 PM
Introduction
Inserting batteries
Open the battery compartment cover in the direction of
the arrow.
Install two “R03/AAA” batteries
(supplied), paying attention to the
polarity diagram in the battery
compartment.
Replace the compartment
cover.
Battery precautions
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified (R03/AAA).
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
6. Dispose of used batteries in a designated area. Do not throw batteries into a fire. Attention should be drawn to the
environmental aspects of battery disposal.
Remote control basics
• Press POWER to turn the DVD/VCR on or off.
• Select your desired operating mode (DVD or VCR) using VCR DVD.
(DVD or VCR indicator on the front panel will show you which mode is selected.)
• Press CH + or CH – to move through the channels one channel at a time.
• The / / / are also used to navigate on-screen menu system.
• You can directly access specific channels using Direct channel selection buttons (0–9).
• Each press of VCR DVD on the remote control, switches the screen between the VCR screen (VCR mode) and the
DVD screen (DVD mode).
Operation
• Aim the remote control at the remote sensor and press control buttons to
operate.
• Operate the remote control within 30° angle on either side of the remote
sensor, up to a distance of approx. 7 meters.
Approx. 7 meters
13
2H20101A (E)p02-13
13
2/1/05, 7:51 PM
Connections
Antenna connections
If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 16 for
the proper connections.
Antenna to DVD/VCR connection
The DVD/VCR must be connected “between” the antenna and the TV. First, disconnect the antenna from the TV and
connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna
system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.
Combination VHF/UHF Antenna with 75 ohm Coaxial Cable
DVD/VCR
IN
(ANT)
75 ohm Coaxial Cable
OUT
(TV)
Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire
DVD/VCR
IN
(ANT)
Matching Transformer 300 ohm Input 75
ohm output (not supplied)
OUT
(TV)
300 ohm Twin Lead (Flat) Wire
(not supplied)
DVD/VCR
Separate VHF and UHF Antennas
UHF
VHF
Combiner 75/300 ohm Inputs 75 ohm output
(not supplied)
300 ohm Twin Lead (Flat) Wire
(not supplied)
IN
(ANT)
OUT
(TV)
75 ohm Coaxial Cable
Note:
If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and
one 75 ohm output.
Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to
the DVD/VCR properly.
• For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type
antenna is required.
• If you are not sure about the connection, please refer to qualified service personnel.
14
2H20101A (E)p14-17
14
2/1/05, 7:51 PM
DVD/VCR to TV connection
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Connections
TV
Note:
If a VHF or UHF antenna is used,
set the TV/CABLE menu option to
the “TV” mode.
VHF/UHF IN
75 ohm Coaxial Cable (supplied)
TV with single 75 ohm VHF/UHF antenna
input
TV
Note:
75 ohm Coaxial Cable
(supplied)
Splitter 75 ohm Input
75/300 ohm outputs
(not supplied)
UHF
If a VHF or UHF antenna is used,
set the TV/CABLE menu option
to the “TV” mode.
VHF
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
TV
UHF
75 ohm Coaxial Cable
(supplied)
Splitter 75 ohm Input
300 ohm outputs
(not supplied)
Note:
If a VHF or UHF antenna is used,
set the TV/CABLE menu option to
the “TV” mode.
VHF
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
15
2H20101A (E)p14-17
15
2/1/05, 7:51 PM
Connections
Cable TV connections
Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This
DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company
supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a
premium channel which is scrambled, you must have a descrambler box for proper reception.
DVD/VCR
TV
IN
(ANT)
VHF/UHF
IN (ANT)
Incoming Cable
OUT
(TV)
Allows: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
DVD/VCR
Converter/
Descrambler
TV
IN
(ANT)
Incoming
Cable
VHF/UHF
IN (ANT)
OUT
(TV)
Allows: * Recording of channels through the converter box
(scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter box.
Note:
To record from converter/descrambler, DVD/
VCR tuner must be tuned to the converter
output channel, usually channel 3 or 4.
Prevents: * Recording one channel while watching another.
* Using the DVD/VCR tuner to select channels.
DVD/VCR
TV
IN
(ANT)
Incoming Cable
Converter/Descrambler
VHF/UHF
IN (ANT)
OUT
(TV)
Allows: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording an unscrambled channel while watching
any channel selected at the converter box.
Prevents:
Recording scrambled channels.
Note:
If you are playing a tape or using the tuner
built into the DVD/VCR, the converter must
be set to the video channel output of the DVD/
VCR (either 3 or 4).
Note: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output of
the Converter/Descrambler box, usually channel 3 or 4.
16
2H20101A (E)p14-17
16
2/1/05, 7:51 PM
IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode.
This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are
many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
TV
Splitter
A/B Switch
IN
(ANT)
VHF/UHF
IN (ANT)
Incoming Cable
Converter/Descrambler
Allows: *
Prevents: *
OUT
(TV)
Connections
DVD/VCR
Recording of one channel while watching another.
Using the programmable timer to record only the channel selected at the converter box.
Recording of all channels through the converter box.
Watching scrambled channels while recording another channel.
* Using the DVD/VCR tuner to select channels.
DVD/VCR
TV
Splitter
IN
(ANT)
Converter/Descrambler
OUT
(TV)
Incoming Cable
VHF/UHF
IN (ANT)
A/B Switch
Allows: *
Prevents:
Recording of nonscrambled channels.
Recording of one channel while watching another.
Watching premium channels through the converter while recording nonscrambled channels.
Using the programmable timer.
Recording scrambled channels.
DVD/VCR
TV
Converter/Descrambler
Splitter
IN
(ANT)
Incoming Cable
Converter/Descrambler
OUT
(TV)
VHF/UHF
IN (ANT)
A/B Switch
Allows: * Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching another (scrambled or
unscrambled) channel.
* Using the programmable timer to record only the channel selected at the converter box.
Prevents: Using the DVD/VCR tuner to select channels.
17
2H20101A (E)p14-17
17
2/1/05, 7:51 PM
Connections
Connecting to a TV
Connect the DVD/VCR to your TV.
Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you
also connect the S-video or ColorStream® component video outputs to your TV/monitor. 19
Connecting to a TV
Signal flow
(yellow) (red)
(white)
To wall outlet
To ANALOG AUDIO OUT
To VIDEO
OUT
Audio/video cable (supplied)
To audio inputs
To video input
(yellow)
(red)
(white)
TV or monitor with
audio/video inputs
Notes:
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
18
2H20101A (E)p18-25
18
2/1/05, 7:51 PM
S-video output
An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has SVideo input, and does not have component video inputs.
Component video outputs
PROGRESSIVE outputs
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Notes:
• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
• In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVD
video picture performance.
Connections
Connecting to an audio system and TV equipped with S-video input/component video inputs
Signal flow
To ANALOG
AUDIO OUT
(white)
(red)
To wall outlet
To SVIDEO
OUT
To PR/CR
VIDEO
OUT
To PB/CB
VIDEO
OUT
To Y
VIDEO
OUT
Component
video cable
(not supplied)
If you connect the DVD/VCR to
your TV with the DVD OUT jacks,
select the corresponding video
input on your television to watch
DVD video discs.
Audio cable (not supplied)
To audio inputs of
the amplifier
To Y video input
(red)
(white)
To PB/CB video input
To PR/CR video input
To S-video input
S-video cable (not supplied)
To switch the scan mode between the
interlace and progressive modes, see
page 59.
TV or monitor with
ColorStream®
component video inputs
Audio system
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/
VCR away from the tuner and radio.
• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
• When connecting to a TV using the Video or S-video jack, make sure that the Progressive indicator “ ” on the
display window is not lit. If it is lit, the Video and S-video outputs do not feed the correct signals and you cannot see
any picture. To turn off the Progressive indicator, select PROGRESSIVE scan Off #' .
19
2H20101A (E)p18-25
19
2/1/05, 7:52 PM
Connections
Connecting to optional equipment
You can enjoy high quality dynamic sounds of DVD video discs or
audio CDs by connecting the DVD/VCR to optional audio
equipment.
For connection to your TV, see “Connecting to a TV”
18 19
• This selection uses the following reference mark.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is
now available to reproduce this realistic effect in the home. You can enjoy motion picture and live
concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic
sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder
or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full
benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.
Manufactured under license from
Dolby Laboratories. “Dolby” “Pro
Logic” and the double-D symbol are
registered trademarks of Dolby
Laboratories.
• Use DVD video discs
encoded via the Dolby Digital
recording system.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
To COAXIAL DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set
the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and
Audio CDs.
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
Amplifier equipped with
Dolby Surround Pro Logic
To audio input
To ANALOG
AUDIO OUT
Audio cable (not supplied)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use,
on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full
benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
Amplifier equipped with a
DTS decoder
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
“DTS” and “DTS Digital Out” are
registered trademarks of Digital Theater
Systems, Inc.
• Use DVD video discs or
audio CDs encoded via the
DTS recording system.
To COAXIAL DIGITAL
AUDIO OUT
20
2H20101A (E)p18-25
20
2/1/05, 7:52 PM
Warning
When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid
possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the
DVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires dangling.) To enjoy
DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the
BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.
Connecting to an amplifier equipped with an MPEG2 audio decoder
Connections
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encorded via the MPEG2 recording system with dynamic realistic
sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an
MPEG2 audio decoder
To COAXIAL
type digital
audio input
• Use DVD video discs
encoded via the MPEG2
recording system.
To COAXIAL DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
Amplifier equipped with a
digital audio input
To COAXIAL
type digital
audio input
To COAXIAL DIGITAL
AUDIO OUT
75 Ω coaxial cable (not supplied)
Notes:
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO
OUT jack of the DVD/VCR.
• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
21
2H20101A (E)p18-25
21
2/1/05, 7:52 PM
Basic setup
POWER
VCR DVD
TV/VCR
Setting the video channel
When a TV is connected with the 75 ohm coaxial cable only.
To view playback of a recorded tape or DVD disc, or to watch a
program selected by the VCR's channel selector, the TV must be set to
channel 3 or 4 (video channel).
Setting the video channel
Press and hold 3 or 4 on the remote for 3
seconds in standby mode.
The video channel will
start to flash for 3
seconds in the display
window.
OR
Press POWER to turn on the DVD/VCR.
Press VCR DVD selector to select the VCR mode.
Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.
Press TV/VCR to select the VCR position.
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for
about 4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot
be tuned on your TV, proceed as follows: set the VCR
3/4 channel selector and the TV to CH 3 or 4, play
back a prerecorded tape and tune the TV to receive a
sharp color picture from the video cassette recorder.
Refer to your TV owner's manual for details.
Note:
If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity, etc.,
may affect the player's operation. Disconnect the AC power cord
once, then connect it again.
The VCR indicator on the
front panel will light.
The VCR indicator will
appear in the display
window.
22
2H20101A (E)p18-25
22
2/1/05, 7:52 PM
Setting the language
VCR DVD
VCR MENU
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
ENTER
SET +/–
Setting the language
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Press VCR MENU until the MENU screen is
cleared.
Basic setup
Preparation:
Press VCR MENU.
The VCR menu screen will appear.
Press SET + or – to select “SYSTEM
SETUP”, then press ENTER.
If you use the unit for the first time and
press VCR MENU, instead of the
main menu screen the “SYSTEM
SETUP” menu screen in step 2 may
appear.
Notes:
• Both the VCR and the DVD have their own player menus 55 .
• If no buttons are pressed for more than 60 seconds, the VCR
MENU screen will return to normal TV-operation automatically.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
〈
+/-/ENTER/MENU 〉
Press SET + or – to select “LANGUAGE”, then
press ENTER.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
Press SET + or – to select the desired language:
English (ENGLISH), Spanish (ESPAÑOL) or
French (FRANCAIS), then press ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPA„OL
FRANCAIS
〈+/-/ENTER/MENU 〉
23
2H20101A (E)p18-25
23
2/1/05, 7:52 PM
Basic setup
POWER
VCR DVD
Clock setting
VCR MENU
The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches
for a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
ENTER
SET +/–
CALL
AUTO CLOCK setting
To set AUTO CLOCK to off
Preparation:
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want AUTO CLOCK setting:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Connect the Antenna or Cable system.
Wait at least three minutes and press POWER.
Press VCR MENU.
• If you use a cable box, turn it on.
+/Ð/ENTER/MENU
Plug the AC power cord to the AC outlet.
Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto Clock
set is not programmed.
Press CALL to check the clock setting on
the on screen display.
8 : 47AM MON
STEREO SAP
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
Press SET + or – to select “AUTO CLOCK”.
Press ENTER to select “OFF”.
Press VCR MENU repeatedly to return to the
normal screen.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/Ð/ENTER/MENU
CH 125
00 : 00 : 00 SP
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/Ð/ENTER/MENU
AUTO CLOCK adjustment
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
• When the AUTO CLOCK is set to
“OFF”, the AUTO CLOCK adjustment does not function.
• Set the clock manually 26 .
24
2H20101A (E)p18-25
24
2/1/05, 7:52 PM
To set STANDARD TIME
To set DAYLIGHT SAVING TIME
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the AUTO CLOCK setting.
To correct the situation:
You can set the DAYLIGHT SAVING TIME automatically or
manually.
Press VCR MENU.
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.
Basic setup
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Press VCR MENU.
+/Ð/ENTER/MENU
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
Press SET + or – to select your time zone,
then press ENTER.
ATLANTIC : GMT–4hours
EASTERN : GMT–5hours
CENTRAL : GMT–6hours
MOUNTAIN : GMT–7hours
PACIFIC
: GMT–8hours
ALASKA
: GMT–9hours
HAWAII
: GMT–10hours
AUTO
: AUTO SET
(GMT: Greenwich Mean Time)
Press SET + or – to select “DAYLIGHT
SAVING TIME”, then press ENTER.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/Ð/ENTER/MENU
Press SET + or – to select “STANDARD TIME”,
then press ENTER.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
+/Ð/ENTER/MENU
Press SET + or – to select one of the
options, then press ENTER. Press VCR
MENU until the MENU screen is cleared.
for manual setting
(forward one hour)
for manual setting
OFF:
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
ON:
When you want to set the DAYLIGHT
SAVING TIME manually, on the first
Sunday in April you set to “ON”, and
on the last Sunday in October you set
to “OFF”.
DAYLIGHT SAVING TIME
ON
OFF
Press VCR MENU until the MENU screen is
cleared.
AUTO
〈+/-/ENTER/MENU 〉
Notes:
• When shipped from factory, the DAYLIGHT SAVING TIME is
Notes:
set to “AUTO” position.
• To be able to select the standard time, the clock must first be
• When the clock is not set, DAYLIGHT SAVING TIME setting
set by AUTO CLOCK once.
is not available.
• If you live in Newfoundland and the AUTO CLOCK does not
function properly, set the AUTO CLOCK menu option to “OFF” • When there is no DAYLIGHT SAVING TIME in your area, always select “OFF” position in step 3.
and set the clock manually.
25
2H20101A (E)p18-25
25
2/1/05, 7:52 PM
Basic setup
Clock setting (continued)
VCR MENU
SET +/–
If the AUTO CLOCK process did not set the date and time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVING TIME.
ENTER
CANCEL
Manual clock setting
EXAMPLE: Setting the clock to “8:30 AM” March, 26
(SAT), 2005.
Press VCR MENU.
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.
8 : 30AM SAT
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
After setting the clock, date and time starts
functioning automatically.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
Press SET + or – to select “CLOCK SET”,
then press ENTER.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
Press SET + or – to set the month, then press
ENTER.
MONTH
DAY
1 (TUE)
YEAR
2005
TIME
12 : 00AM
〈+/Ð/ENTER/CANCEL/MENU 〉
Set the day, year and time as in step 4.
MONTH
DAY
26 (SAT)
YEAR
2005
TIME
8 : 30AM
〈+/Ð/ENTER/CANCEL/MENU 〉
26
2H20101A (E)p26-31
26
2/1/05, 7:52 PM
Tuner setting
VCR DVD
VCR MENU
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR’s memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
TV/CABLE selection
SET +/–
Setting channels automatically
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Repeat left step 1 and press SET + or – to
select “AUTO CH MEMORY”.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
Press VCR MENU. Press SET + or – to select
“CH SETUP”, then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
〈+/-/ENTER/MENU 〉
Press ENTER.
Auto tuning will begin. The channel display will count up and when finished,
the screen returns to normal.
+/Ð/ENTER/MENU
Basic setup
Preparation:
ENTER
+0 
Press SET + or – to select “TV/CABLE”.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
+/Ð/ENTER/MENU
Press ENTER to select the TV or CABLE
mode.
The arrow indicates the selected mode.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
TV
- VHF/UHF channels
CABLE - Cable TV channels
+/Ð/ENTER/MENU
Press VCR MENU until the menu screen is
cleared.
Note:
You can’t select “CH SETUP” if you set the channel to “L1” or
“L2”.
27
2H20101A (E)p26-31
27
2/1/05, 7:52 PM
Basic setup
Tuner setting (continued)
VCR MENU
ENTER
SET +/–
0–9
To ADD/DELETE channels
Noise elimination
When you don't want to receive a weak signal broadcast, a
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”.
Repeat the step 1 on page 27. Then press SET + or
– to select the “ADD/DELETE” and press ENTER.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
Repeat the steps 1~2 on page 26 and press SET
+ or – to select “NO NOISE BACKGROUND”.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
+/Ð/ENTER/MENU
To Add or Delete desired channels
1) Press Direct channel selection buttons (0–9)
or SET +/– to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until “ADD” appears on the screen.
To delete channels
Press ENTER until “DELETE” appears on the
screen. The channel number will blink
Press ENTER to select “ON” or “OFF” position.
Press VCR MENU until the menu screen is
cleared.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU 〉
3) Repeat 1) to 2) to add or delete other channel.
ADD
CH 003
+/Ð/0Ð9/ENTER/MENU
Press VCR MENU until the menu screen is
cleared.
28
2H20101A (E)p26-31
28
2/1/05, 7:52 PM
Playback (VCR)
Loading and unloading a cassette tape
Use only video cassette tapes marked
EJECT
Loading
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Basic setupPlayback (VCR)
Erase prevention tab
Automatic power ON
When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
Press EJECT on the front panel or on the remote.
Remove the cassette tape.
or
Automatic tape eject
This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning,
the cassette tape will be ejected automatically.
To prevent accidental erasure
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
To record again
Cover the hole with a piece of adhesive tape.
Screwdriver
Erase prevention tab
Adhesive tape
Tape speed and maximum recording time
Tape Speed
Video cassette tape
T-160
T-120
T-90
T-60
T-30
SP (Standard Play)
2-2/3 hours
2 hours
1-1/2 hours
1 hour
30 minutes
SLP (Super Long Play)
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
29
2H20101A (E)p26-31
29
2/1/05, 7:52 PM
Playback (VCR)
Cassette tape playback
VCR DVD
To play a prerecorded tape.
PLAY
STOP
FF
REW
Playback
Rewind or forward the tape
Preparation:
Stop the playback or recording via STOP on remote.
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light).
To rewind the tape:
Press REW.
Load a prerecorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
To forward the tape:
Press FF.
To start playback
Press PLAY.
Playback will start. “ ” will appear
on the screen for about 4 seconds.
To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
Forward/Reverse picture search mode
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
“ ” will appear on the screen for
about 4 seconds.
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REW or
FF and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.
Notes:
• This VCR selects the playback tape speed SP, LP or SLP automatically.
• The Cassette tape and DVD disc can be played back simultaneously. If you press DVD/VCR selector, the tape playback
and DVD playback alternate with each other on the screen
(via CH3, 4 or video connection).
30
2H20101A (E)p26-31
30
2/1/05, 7:52 PM
CM SKIP
SLOW
SET +/–
Special playback
PAUSE/STEP
PLAY
FF
REW
ATR
Adjusting tracking condition
Reverse picture search function
Press REW once or twice during playback.
Forward picture search function
Press FF once or twice during playback.
To return to playback, press PLAY.
Automatic tracking adjustment
Whenever you insert a tape and start playback, the
automatic tracking feature continuously analyzes the signal
to enable optimum picture quality during playback.
SPEED SEARCH TIMES
TAPE SPEED
PICTURE SEARCH SPEED
PRESS ONCE PRESS TWICE
SP (Standard Play)
3X
5X
LP (Long Play)
7X
9X
SLP (Super Long Play)
9X
15 X
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET +/– to eliminate the noise. “MANUAL
TR.” will appear on the screen. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Playback (VCR)
Picture search
Press ATR to reactivate automatic tracking again.
“AUTO TR.” will appear on the screen.
Still picture
Press PAUSE/STEP during playback.
To resume normal playback, press PLAY or PAUSE/STEP.
Slow motion
During playback press SLOW.
To return to playback, press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the SET + /– to reduce the noise bars.
If the still picture jitters excessively, press SET +/– to
stabilize the still picture.
Frame by frame picture
Press PAUSE/STEP during playback.
Press SLOW repeatedly: The picture advances frame by
frame.
To return to playback, press PLAY or PAUSE/STEP.
CM skip
Press CM SKIP during playback. The DVD/VCR will search
forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of CM SKIP
(maximum six presses) and then resume normal playback.
For example : 1 press: 30 seconds of tape
2 press: 60 seconds of tape
3 press: 90 seconds of tape
AUTO TR.
Notes:
• The audio output is muted during PICTURE, STILL, FRAME
ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars. This is
not a defect.
• Playback will commence after approx. 5 minutes to protect
the video tape against excessive wear during pause mode.
Video head cleaning
Video head clogging
The video heads are the means by
which the DVD/VCR reads the picture
from the tape during playback. In the
unlikely event that the heads become
dirty enough to be clogged, no picture
will be displayed. This can easily be
determined if, during playback of a
known good tape, there is good sound,
but no picture (picture is extremely
snowy). If this is the case, have the
DVD/VCR checked and cleaned by
qualified service personnel.
Good Picture
Snowy Picture
Notes:
• DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR
SERVICE THE UNIT BY REMOVING THE REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
31
2H20101A (E)p26-31
31
2/1/05, 7:52 PM
Playback (VCR)
CLOCK/COUNTER
VCR MENU
SET +/–
Convenience function
ENTER
STOP
PLAY
CALL
ZERO RETURN
COUNTER RESET
Repeat playback
Zero return function
The entire video tape will play until its end. The tape will
automatically rewind to the beginning and the playback will
be repeated.
This function rewinds the tape to the “00:00:00” counter position
automatically.
Press VCR MENU.
Press SET + or – to select “AUTO
REPEAT”.
Press CLOCK/COUNTER.
Press COUNTER RESET at the desired tape
position.
Press STOP when playback or recording is
completed.
Press ZERO RETURN.
The counter display shows the tape running time during playback or recording.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
Press ENTER to select “ON” or “OFF”.
If “ON” is selected, the playback
will be repeated endlessly.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
The counter display will be reset to
“00:00:00” position (e.g. the beginning
of recording).
+/Ð/ENTER/MENU
Press VCR MENU until the menu screen is
cleared.
If you press CALL, “ ” will
appear on the screen 11 .
The tape will automatically rewind or fast
forward to the “00:00:00” counter position.
To commence playback, press PLAY.
The playback will be repeated
endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select
“OFF” position. Press VCR MENU to return to the TV.
32
2H20101A (E)p32-37
32
2/1/05, 7:53 PM
VCR DVD
CLOCK/COUNTER
STOP
INDEX +/–
Clock/counter display
Press CLOCK/COUNTER. The clock and tape counter
alternate with each other in the display window.
COUNTER
Press VCR DVD selector. The DVD mode and the
VCR mode alternate with each other in the display.
DVD mode
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX mark
The Index Search function automatically records an INDEX mark
on the tape whenever a recording
is initiated.
CH 001
Playback (VCR)
CLOCK
Video index search system
INDEX
Index search
Press INDEX + or – during stop or play mode.
For Succeeding programs: Press INDEX +.
For Preceding programs: Press INDEX –.
(As many as 9 index points can be accessed via this
method.)
When the INDEX + or – is pressed,
the unit starts searching the INDEX
NO. selected and finds the portion,
then playback starts automatically.
To stop the Index Search, press
STOP.
or
is displayed
INDEX NO. (up to 9)
VCR mode
Notes:
• If you rewind the tape beyond “00:00:00”, a minus sign (“–”)
will be displayed in front of the time.
• When you load a tape, the counter will reset to “00:00:00”.
• The counter does not function on nonrecorded (blank)
sections of the tape. When you rewind, fast forward or play
tapes through blank sections, the counter stops.
Notes:
• When you record an INDEX mark at the very beginning of the
tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play at a
slightly different location.
• INDEX may not function properly with old or worn out video tapes.
• INDEX marks may not be found if it is extremely close to the point
where the search began.
• In recording, if you stop recording temporarily, the INDEX mark
is not recorded on the tape.
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
S-VHS system.
However, the picture will not have the high resolution of
S-VHS system.
Note: You cannot record S-VHS video format with this VCR.
33
2H20101A (E)p32-37
33
2/1/05, 7:53 PM
Recording (VCR)
VCR DVD
Recording a TV program
CH +/–
Recording and viewing the same TV program.
REC/OTR
SP/SLP
0–9
Recording a TV program
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Press Number buttons or CH +/– to select the
channel to be recorded.
+0 
Load a cassette tape with the erase prevention
tab intact.
The DVD/VCR will automatically turn on.
TV mode direct channel selection:
All channels can be instantly selected by using two
buttons. (for example, to select channel 2, press “0”, then
“2”. If you press only “2”, channel selection will be delayed
for two seconds.) For channels 10 and above, press the 2
digits in order.
CABLE mode direct channel selection:
1-9
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
Press 0 twice and then 1-9 as required.
Example: To select “2”, Press 002.
10-12
Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for “12”.
13-99
Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
VHF/UHF/CABLE TV CHANNELS
TV
VHF
2-13
UHF
14-69
00 : 00 : 00 SP
CABLE TV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
Select “TV” or “CABLE” to the appropriate
position 27 .
TV
- VHF/UHF channels
CABLE - Cable TV channels
Press REC/OTR.
“ ” will appear on the screen
for about 4 seconds and “REC” will
appear on the display window.
CH 110
INDEX
34
2H20101A (E)p32-37
34
2/1/05, 7:53 PM
TV/VCR
PAUSE/STEP
STOP
To stop recording
Press STOP to stop recording.
“ ” will appear on screen for about
4 seconds.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
Recording (VCR)
To stop recording temporarily
Press PAUSE/STEP to avoid recording unwanted
material. Press again to continue the recording.
“
” will appear on screen for
about 4 seconds.
+0 
Notes:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
Recording one program while
watching another
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TV/VCR to select the TV position.
The “VCR” display will go off and recording will continue.
Select the TV channel you want to watch by using the
TV channel selector.
Note:
Some Cable TV hookups do not permit viewing one channel
while recording another. See pages 16 and 17 .
35
2H20101A (E)p32-37
35
2/1/05, 7:53 PM
Recording (VCR)
VCR DVD
One-touch Timer Recording (OTR)
CH +/–
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
STOP
REC/OTR
SP/SLP
0–9
One-touch Timer Recording (OTR)
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
Press Direct channel selection buttons (0–9) or
CH +/– to select the channel to be recorded.
+0 
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
Press REC/OTR. Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, “ ” will appear on
the display.
Press SP/SLP to select the desired tape speed
SP or SLP.
Press Recording time
NORMAL REC
once
0:30
twice
1:00
3 times
1:30
4 times
2:00
5 times
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
Press Recording time
3:00
6 times
4:00
7 times
5:00
8 times
6:00
9 times
10 times NORMAL REC
OTR 0 : 30
CH 110
00 : 00 : 00 SP
INDEX
Set “TV” or “CABLE” option to the
appropriate position 27 .
To cancel OTR
TV
- VHF/UHF channels
CABLE - Cable TV channels
Press STOP or turn off the power.
“
” will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press VCR DVD selector to change to DVD mode and
perform the DVD playback 42 .
36
2H20101A (E)p32-37
36
2/1/05, 7:53 PM
VCR DVD
EJECT
VCR MENU
SET +/–
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
ENTER
CANCEL
TIMER REC
Timer recording
Preparation:
• Press VCR DVD selector to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct 24 .
Example: Program a timer recording for the 26th day,
channel 125 (Cable TV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
START END
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
CH
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
〈+/Ð/ENTER/CANCEL/MENU 〉
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Press SET + or – to select the date, then press
ENTER.
DATE
START END CH
—:——
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
26(SA)
—:——
—:——
—:——
—:——
—:——
—:——
—:——
—:——
— ——
— ——
— ——
— ——
— ——
— ——
— ——
— ——
—
—
—
—
—
—
—
—
〈+/—/ENTER/CANCEL/MENU〉
Set the start time, end time, channel and tape
speed as in step 3.
DATE
START END
26(SA)
11:00PM 11:30PM 125 SLP
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
—:——
—:——
—:——
—:——
—:——
—:——
—:——
CH
— ——
— ——
— ——
— ——
— ——
— ——
— ——
〈+/—/ENTER/CANCEL/MENU 〉
—
—
—
—
—
—
—
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to “L1” or
“L2”.
DATE
START END
26(SA)
11:00PM 11:30PM 125 SLP
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
— — — — — —— : — —
—:——
—:——
—:——
—:——
—:——
—:——
—:——
CH
— ——
— ——
— ——
— ——
— ——
— ——
— ——
—
—
—
—
—
—
—
〈+/—/ENTER/CANCEL/MENU 〉
Press SET + or – to select one of the program
line, then press ENTER.
DATE
• To return to the normal screen,
press VCR MENU twice.
Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.
+/Ð/ENTER/MENU
To enter other programs, repeat step 2
through 4.
Recording (VCR)
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
Notes:
• The timer recording will start at 5 seconds before the time
you predetermined.
• If the timer symbol(
) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded 29 .
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed 29 .
Notes:
• If the timer symbol ( ) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press TIMER REC at first, then press
VCR DVD selector to change to VCR mode. After you use the
VCR, press TIMER REC again to put the VCR into timer
recording standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock 24 and
reprogram any timer recording.
37
2H20101A (E)p32-37
37
2/1/05, 7:53 PM
Recording (VCR)
Timer recording (continued)
VCR DVD
VCR MENU
SET +/–
ENTER
CANCEL
TIMER REC
Setting
procedure
To set
daily/weekly
timer
To confirm or cancel a program
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MOSA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At step 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
If the Timer has been activated, press TIMER
REC to deactivate the Timer.
To confirm Timer program:
The timer symbol ( ) will
disappear. Then press VCR DVD
selector to change to VCR mode.
When you press SET – repeatedly, the
DATE indicator will change as follows, in
this case the day is Friday.
The current day (Friday)
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
minus one day
MO-FR (Monday to Friday)
WKL-WE
(Weekly Wednesday)
WKL-TH (Weekly Thursday)
DATE
WKL-WE
START END
At step 1 on the previous page select “TIMER REC
SET” and press ENTER.
The timer program list will appear on the screen.
CH
〈+/Ð/ENTER/CANCEL/MENU〉
If the programs overlap another
9 : 00
10 : 00
START END
11:00PM 11:30PM 125 SLP
CH
〈+/—/ENTER/CANCEL/MENU〉
To cancel Timer program:
Press SET + or – to select the unwanted program,
then press CANCEL to cancel the program.
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00
DATE
26(SA)
DATE
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
11 : 00
Program 1
START END
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
Ð:ÐÐ
CH
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
ÐÐÐ
〈+/Ð/ENTER/CANCEL/MENU 〉
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Control Settings
Prog.1
Prog.2
Prog.3
Press VCR MENU repeatedly until the menu
screen is cleared.
Notes:
• The daily/weekly recording can be made continuously until the
recording is canceled or the tape reaches the end.
Notes:
• During timer recording the automatic rewinding mechanism
• If there are other timer record programs remaining, TIMER
does not function.
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer recording
operation.
• You can correct or cancel a programmed setting in program
confirm mode.
38
2H20101A (E)p38-41
38
2/1/05, 7:53 PM
Other functions (VCR)
VCR MENU
Stereo recording and playback /
Second Audio Program (SAP)
ENTER
SET +/–
AUDIO SELECT
Stereo recording and playback
Second Audio Program (SAP)
The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.
Your DVD/VCR is fitted with a SAP broadcast system which
enables you to switch to a second audio program when
viewing a selected channel.
This function applies only when the program is broadcast
in multi-languages through the SAP broadcast system.
When a MTS STEREO broadcast is received, “STEREO” will
appear on the screen for about 4
seconds and the program can
be viewed or recorded in stereo.
The Hi-Fi stereo recording procedure is the same as for normal
recordings.
STEREO
Press VCR MENU. Then press SET + or – to
select “SAP”.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Note:
When using a Cable TV system, stereo TV programs may
be transmitted over a mono cable channel. In this case
“STEREO” will not appear and the sound will be in mono.
OUTPUT
SELECTION
SOUND HEARD ON BOTH
SPEAKERS
STEREO
L ch
R ch
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Other functions (VCR)
Output selection
When viewing an MTS stereo TV program, or playing a
prerecorded VHS Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The “R”
and “L” positions allow the audio from the Right or Left HiFi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape or
TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for
several seconds. Refer to the chart below.
+/Ð/ENTER/MENU
Press ENTER to select “ON”.
Then press VCR MENU until the
menu screen is cleared.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
Listening to SAP
When the VCR is turned on or a channel selection is
made, make certain the letters “SAP” appears on the
screen for about 4 seconds. This means that the “Second
Audio Program” broadcasting is available.
STEREO SAP
5)2
OR
Notes:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cable not connected),
the sound will be monaural.
39
2H20101A (E)p38-41
39
2/1/05, 7:53 PM
Other functions (VCR)
Duplicating a video tape
VCR DVD
INPUT SELECT
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate
a previously recorded tape. Make all connections before turning on the power.
STOP
SP/SLP
REC/OTR
Duplicating a video tape
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
Connection with second VCR
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
Press SP/SLP to select the desired tape speed
SP or SLP.
It is recommended that you set the
tape speed to the SP mode on the
recording VCR for best results.
To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
“L1” or “L2” will appear in the display.
To VIDEO IN
To AUDIO (R) IN
To AUDIO (L) IN
L1: on the rear panel
L2: on the front panel
Connection with Camcorder
Playback Camcorder
Press PLAY on the playback VCR or Camcorder.
Press REC/OTR on the recording VCR.
To AV Jack
Recording VCR
The duplicating process begins.
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
AUDIO/VIDEO cable (not supplied)
Press STOP after duplicating a video tape.
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
40
2H20101A (E)p38-41
40
2/1/05, 7:53 PM
Recording a DVD/CD disc
VCR DVD
You can record disc material in DVD, Audio CD, etc. onto a Video
tape with this DVD/VCR.
STOP
PLAY
SP/SLP
REC/OTR
Duplicating a DVD or CD disc
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
• Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.
Press SP/SLP to select the desired tape speed
SP or SLP.
Press VCR DVD selector to select the DVD mode.
Press PLAY to start playback.
Press REC/OTR to start recording.
Press STOP if you finish recording.
DISC IS COPY PROTECTED
The DVD indicator will light.
Other functions (VCR)
00 : 00 : 00 SP
Notes:
• You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
• When the scanning mode is set to the progressive mode,
you cannot duplicate a disc material onto a video tape.
When REC/OTR is pressed, the PROGRESSIVE indicator
“ ” on the display window will flash and “Please Set
Off” will appear on the screen.
• You cannot record discs encoded with copy guard
function. The following icon and text will show up on the
TV screen.
The DVD/VCR will change to the
VCR mode automatically and the
playback picture or sound will be
duplicated on the video cassette
tape.
If you wish to stop a DVD/CD disc,
press VCR DVD selector to change
the DVD mode, then press STOP.
41
2H20101A (E)p38-41
41
2/1/05, 7:53 PM
Basic playback (DVD)
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
VCR/DVD SELECT
Display window
DVD
VCD
CD
Disc tray
STOP
ON/STANDBY
PLAY
OPEN/CLOSE
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This
may include S-video or component video inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input
connected to the DVD/VCR.
Press ON/STANDBY.
The DVD/VCR turns on.
Press OPEN/CLOSE or PLAY on the unit.
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading” and then playback
commences.
OR
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press VCR/DVD SELECT to select the DVD mode.
The DVD indicator will light.
Reading
Press OPEN/CLOSE.
The disc tray opens.
Place the disc on the disc tray.
Press
Press ENTER.
Press STOP to end playback.
or
to select title.
• Title is selected and play
commences.
With the playback
side down
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD/VCR to malfunction.
• Do not place a disc which is unplayable in this
DVD/VCR.
• The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY.
42
2H20101A (E)p42-45
42
2/1/05, 7:53 PM
VCR DVD
POWER
OPEN/CLOSE
C/D/B/A
ENTER
STOP
PLAY
PAUSE/STEP
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About DVD VCD CD
The DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
DVD : You can use this function with DVD video discs.
: You can use this function with Video CDs.
CD
: You can use this function with Audio CDs and CD-R/RW CDs.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
1) Start to record.
Follow steps 1~5 on page 34.
• If the DVD/VCR is standing by for recording, turn on
the DVD/VCR.
2) Press VCR DVD selector to select DVD mode.
3) Play a disc.
Follow steps 3 ~ 5 on page 42.
• Press PLAY if the DVD/VCR does not start to play a
disc automatically.
4) Stop to play.
Press STOP to stop play back a disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
Basic playback (DVD)
Remove the disc after the disc tray
opens completely.
Playing a Disc while the VCR section is recording
or standing by for timer recording
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again 8 #' .
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,
“Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 51.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to
the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the
unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
43
2H20101A (E)p42-45
43
2/1/05, 7:53 PM
Basic playback (DVD)
Playing a disc (continued)
You can play discs at various speeds.
SLOW
PAUSE/STEP
PLAY
FF
REW
SKIP /
DVD
VCD
CD
Playing in fast reverse or fast forward directions
Press REW or FF during playback.
To resume normal playback
Press PLAY.
REW: Fast reverse playback
FF: Fast forward playback
Each time you press REW or FF, the
playback speed changes.
DVD
VCD
Notes:
• The DVD/VCR mutes sound and subtitles during reverse
and forward scan of DVD/VCD video discs. However, this
unit plays sound during fast forward or fast reverse play of
audio CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STEP during still playback.
To resume normal playback
Press PLAY.
Each time you press PAUSE/STEP,
the picture advances one frame.
Note:
The sound is muted during frame by frame playback.
DVD
VCD
Playing in slow-motion
Press SLOW (
) during playback.
Each time you press the button, the
slow-motion speed changes.
DVD
VCD
CD
To resume normal playback
Press PLAY.
Notes:
• The sound is muted during slow-motion playback.
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
Notes:
may appear at the upper left of the screen. This symbol means either the feature you tried is not
• A “Prohibition” symbol
available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/
VCR.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
44
2H20101A (E)p42-45
44
2/1/05, 7:54 PM
Advanced playback (DVD)
Zooming/Locating desired scene
ZOOM
C/D/B/A
ENTER
CLEAR
DISPLAY
0–9
SEARCH
DVD
VCD
CD
Zooming
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
D/B
B/A
A to view a different part of the
Press C/D
frame.
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
Locating desired scene
Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to play back. To check the title, chapter and time, press DISPLAY.
Press SEARCH during playback or stop mode.
Time
/6
Title
Chapter
/Enter/0 9/Clear/Search
• “Time” only works in resume
stop mode.
Time
/6
Title
12
Chapter
/Enter/0 9/Clear/Search
• If you input a wrong number, press
CLEAR.
• Refer to the package supplied with
the disc to check the numbers.
Press C or D to select the “Time”, “Title” or
“Chapter”.
Time
/6
Title
Chapter
/Enter/0 9/Clear/Search
Press Number buttons (0–9) to change the
number.
Advanced playback (DVD)
DVD
VCD
CD
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC
51
45
2H20101A (E)p42-45
45
2/1/05, 7:54 PM
Advanced playback (DVD)
Marking desired scenes
C/D
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
ENTER
CLEAR
MARKER
DVD
VCD
Marking the scenes
Press MARKER during playback.
DVD
VCD
Returning to the scenes
Press MARKER during playback or stop mode.
Marker 1
Marker 2
Marker 3
/Enter/Clear/Marker
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
/Enter/Clear/Marker
Press C or D to select the Marker 1-3.
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
/Enter/Clear/Marker
• Repeat this procedure to set the
other 2 scenes.
Marker 1 00 27 54
Marker 2
Marker 3
/Enter/Clear/Marker
Press ENTER.
Playback starts from the marked
scene.
Press MARKER to remove this display.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Notes:
• Some discs may not work with the marking operation.
• The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
46
2H20101A (E)p46-49
46
2/1/05, 7:54 PM
Repeat playback/A-B Repeat playback
D/B/A
PLAY
A-B RPT
PLAY MODE
DVD
VCD
CD
DVD
VCD
CD
Repeat playback
Press PLAY MODE during playback or stop mode.
A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
Press A-B RPT during playback.
The start point is selected.
[DVD]
A to select “Chapter” or “Title”.
Press B/A
Repeat
Off
/Play Mode
The unit automatically starts repeat
playback after finishing the current title or chapter.
Press A-B RPT again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, returns to Point A automatically, then
starts again.
Play Mode
Repeat
/Play Mode
A B
Off
Off
The unit automatically starts repeat
playback after finishing the current
track.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
Advanced playback (DVD)
[Audio CD, Video CD, MP3/WMA CD]
Press D to select “Repeat”.
A to select “Track” or “All”.
Press B/A
Press PLAY MODE again to make the screen
disappear.
To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohibited during playback.
To resume normal playback
Press A-B RPT again.
“
Off ” appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG CD.
• A-B Repeat is prohibited when PBC is on.
47
2H20101A (E)p46-49
47
2/1/05, 7:54 PM
Advanced playback (DVD)
Program playback/Random playback
You can arrange the playback order of tracks or files on the disc. And
also the unit selects tracks or files at random and playback them.
These feature works for Audio CD, Video CD and MP3/WMA/JPEG
CD.
VCD
CD
C/D/B/A
ENTER
CLEAR
PLAY
SKIP
PLAY MODE
0–9
Program playback
Press PLAY MODE during stop mode.
D to select Play Mode, then press
Press C/D
B/A
A to select “Program”.
Play Mode
Repeat
/Play Mode
Off
Off
D/B
B/A
A to select “Program Playback”
Press C/D
and press ENTER.
The programs you selected will start to playback in
the order.
• In case of JPEG file, press SKIP
Play Mode
Repeat
Clear
: Program
: Off
10
11
12
Program Playback
/Enter/0 9/Clear/Play Mode
D or B/A
Press C/D
A to select the programming
position. Use Number buttons (0–9) to input the
track or file numbers.
• To program others, repeat step 3.
• If you input a wrong number, press
CLEAR.
Play Mode
Repeat
19
23
3 11
Clear
VCD
CD
to continue
the program playback.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Play Mode
: Program
Repeat
: Off
19
10
23
11
3 11 6
12
Clear
Program Playback
/Enter/0 9/Clear/Play Mode
: Program
: Off
10
11
12
Program Playback
/Enter/0 9/Clear/Play Mode
■ To change the program
1. In the program mode, press C/D/B /A to select the track
number.
2. Press Number buttons (0–9) to select the track number
to be replaced.
■ To clear the program one by one
In the program mode, press C/D/B/A to select the track
number. Then press CLEAR.
■ To clear all the programs
In the program mode, press C/D/B/A to select “Clear”.
Then press ENTER.
Notes:
• In playing back the Video CD with PBC, you cannot set
Program playback.
• The program is cancelled when you open the disc tray or
turn the power off.
Random playback
Press PLAY MODE during playback or stop
mode.
D to select Play Mode, then press
Press C/D
B/A
A to select “Random”.
Play Mode
Repeat
/Play Mode
Random
Off
Press PLAY.
The Random Playback will start.
• If you set “Random” during playback mode,
Random playback will begin after the track that is
currently being played has ended.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Note:
In playing back the Video CD with PBC, you cannot set
Random playback.
48
2H20101A (E)p46-49
48
2/1/05, 7:54 PM
Changing angles/Title selection/DVD menu
TOP MENU
MENU
C/D/B/A
ENTER
PLAY
ANGLE
DVD
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
Press ANGLE during playback.
The current angle will appear.
Press ANGLE repeatedly until the desired angle
is selected.
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
DVD
Title selection
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
Press TOP MENU during playback.
D/B
B/A
A to select the desired title.
Press C/D
Title menu appears on the screen.
Press ENTER or PLAY.
The playback of the selected title will
start.
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
DVD
DVD menu
Advanced playback (DVD)
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
Press MENU during playback.
The DVD menu appears on the screen.
• Press MENU again to resume
playback at the scene when you
pressed MENU.
A to select the desired item.
B/A
D/B
Press C/D
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
Note:
Depending on the DVD, you may not be able to resume playback
from the scene point when you pressed MENU.
49
2H20101A (E)p46-49
49
2/1/05, 7:54 PM
Advanced playback (DVD)
Changing soundtrack language/
Setting surround sound
B/A
AUDIO
DVD
VCD
Changing soundtrack language
You can select the language when you play a multilingual disc.
Press AUDIO during playback.
The current soundtrack language will
appear.
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
LR
QSound Off
2/8 Fra Dolby Digital
QSound Off
Press AUDIO repeatedly until the desired language is selected.
1/8 Eng Dolby Digital
QSound Off
QSound Off
QSound Off
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
• The on screen display will disappear after a few
seconds.
DVD
VCD
CD
Setting surround sound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.
During disc playback press AUDIO.
1/8 Eng Dolby Digital
QSound Off
Press B or A to select “On”.
1/8 Eng Dolby Digital
QSound On
• The on screen display will disappear after a few
seconds.
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select the
“Off” position.
Notes:
• The “QSound” is effective only for the sound of disc.
• The QSound setting can also be changed in the function
setting #& .
Manufactured under license from QSound Labs,
Inc. U.S. patent Nos. 5,105,462, 5,208,860 and
5,440,638 and various foreign counterpart.
Copyright QSound Labs, Inc. 1998-2002.
QXpander™ is a trademark of QSound Labs, Inc.
All rights reserved.
50
2H20101A (E)p50-55
50
2/1/05, 7:54 PM
Subtitles/To turn off the PBC
C/D/B/A
ENTER
PLAYMODE
SUBTITLE
DVD
To turn off the PBC
Subtitles
When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.
Press PLAY MODE in the stop mode.
Press / to select Play Mode, then press
/ to select “Off”.
Press SUBTITLE repeatedly during playback
until your desired language appears.
1/8 Eng
Play Mode : Off
Repeat
: Off
/Play Mode
To turn off the subtitle, press SUBTITLE until
“Off” appears.
Off
• The on screen display will disappear after a few
seconds.
Press PLAY MODE again to make the screen
disappear.
To turn on the PBC
Follow the above steps 1~2, then press
“PBC”.
or
to select
Note:
You can also turn off the PBC by pressing number button 1
and ENTER in the stop mode.
Advanced playback (DVD)
Notes:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
• In some cases, a selected subtitle language may not be
changed immediately.
51
2H20101A (E)p50-55
51
2/1/05, 7:54 PM
Advanced playback (DVD)
MP3/WMA/JPEG operation
This player can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA
JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
The Apple-HFS-System cannot be played.
Note:
This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats
(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, Toshiba cannot
guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this
owner’s manual are meant as a guide only.
Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted
content, including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof.
Toshiba has no right to grant and does not grant permission to download any copyrighted content.
MP3/WMA/JPEG CD information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension
letters, “mp3”, “wma”, “jpg”.
• MP3/WMA/JPEG CD must be correspond to the ISO standardized files.
• This unit can read 600 files per disc. If one directory has more than 600 files, it reads up to 600 files, the remaining
files will be omitted.
• The unit is able to recognize up to a maximum of 50 directories per disc.
• MP3/WMA/JPEG CDs cannot be used for the purpose of recording.
• If the CD has both audio tracks and MP3/WMA/JPEG files, only audio tracks are played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 16
letters) on the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 16 letters.
Available letters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
• The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.
Standard, sampling frequency, and the bit rate:
MP3 CD
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA CD
WMA version 7, and 8
32kHz, 48kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
Microsoft, Windows Media, and Windows Logo are trademarks or registered trademarks of Microsoft Corporation in both the
United States and other countries.
52
2H20101A (E)p50-55
52
2/1/05, 7:54 PM
TOP MENU
▲/▼/ /
ENTER
PLAY
STOP
0–9
MP3/WMA CD playback
CD
Place a disc on which MP3 or WMA files have
been recorded onto the disc tray.
A file menu screen will appear on the screen.
A or ENTER to select folder.
Press B/A
CD
Pops
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
-/72 --:-flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
Press STOP to end playback.
• The unit records the stopped point. “ ” appears on
the screen. Press PLAY to resume playback (from the
scene point).
• If you press STOP again or unload the disc, the unit
will clear the stopped point.
About file menu
D/B
B/A
A or Number buttons (0–9) to sePress C/D
lect the desired file.
Operation
Elapsed time
Media type
File number
Folder
-/72
CD
--:--
-/72
CD
Japan
flower
15
Mother
Bay Bridge
Lies and Truth-
16
Hold Your Last
CLOSE MY EYES 10
DIVE TO BLUE
11
Rain
winter fall
Honey
12
Strawberry
BLUE EYES
13
Welcome party
Blurry Eyes
14
Thailand
/0-9/Enter/Play Mode
/0-9/Enter/Play Mode
• When PLAY has been pressed after displaying the file
menu, or when the disc tray has been closed using
PLAY, playback begins automatically starting from the
first file. In this case, if the first file is an MP3/WMA file,
only MP3/WMA files are played back in order. If the
first file is a JPEG file, the first JPEG file is played back.
Press ENTER.
The selected file starts playing back.
: Indicates MP3-file
--:--
Pops
Pops
/0-9/Enter/Play Mode/Menu
: Indicates WMA-file
: Indicates JPEG-file
Notes:
• The picture menu is displayed when the FUJICOLOR CD
or the Kodak Picture CD are played. To display the file
menu, press TOP MENU.
• In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
• MP3 or WMA file on the Kodak Picture CD is not recognized on this unit.
Advanced playback (DVD)
• In case the folder includes more than 15 files, press B
or A to display next file list.
CD
Notes:
• During MP3/WMA/JPEG-Playback, you cannot use SEARCH,
A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG CD Playback "% "& .
53
2H20101A (E)p50-55
53
2/1/05, 7:54 PM
Advanced playback (DVD)
MP3/WMA/JPEG operation (continued)
TOP MENU
MENU
▲/▼/ /
ENTER
PLAY
STOP
SKIP /
PAUSE
0–9
ANGLE
CD
JPEG CD playback
Place a disc on which JPEG files have been
recorded onto the tray.
A file menu screen will appear on the screen.
A to select folder.
Press B/A
CD
CD
Collection
Pic-1
Pic-2
Pic-3
Pic-4
Pic-5
Pic-6
Pic-7
-/36
8 Pic-8
9 Pic-9
10 Pic-10
11 Pic-11
12 Pic-12
13 Pic-13
14 Pic-14
/0-9/Enter/Play Mode/Menu
D/B
B/A
A or Number buttons (0–9) to sePress C/D
lect the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
Press B/A or C/D to select the desired file.
• To display next list, press SKIP
/ .
• When PLAY has been pressed after displaying
the file menu, or when the disc tray has been
closed after pressing PLAY, playback begins automatically starting from the first file. In this case,
if the first file is a JPEG file, the first JPEG file is
played back. If the first file is an MP3/WMA file,
only MP3/WMA files are played back in order.
Slide show playback
The slide show enables you to view pictures (files) one after
another automatically.
Preparation:
Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”
or “15 Seconds” #& .
Select your desired starting file for the slide
show in the step 3 as left.
Press ENTER to start slide show from the selected file.
• If you press PAUSE during the slide show, the slide
show stops temporary. “ 4 ” appears briefly on the picture.
If the picture appears upside down or sideways, press
ANGLE repeatedly until it’s right side up.
”, “
”, “
” or “
” appears briefly
“
on the screen.
again to resume the slide show.
Press PLAY or SKIP
• When the slide show playback finished the file list appears.
• To stop the slide show, press STOP. The file list appears.
Press ENTER. The selected picture appears on
the screen.
Rotating an image
You can rotate an image by 90 degrees by pressing
ANGLE during playback of the image.
”, “
”, “
” or “
” appears briefly
“
on the screen.
Press STOP to end playback.
The file menu appears on the screen.
If you want to watch the other file, repeat steps
3 ~ 4.
54
2H20101A (E)p50-55
54
2/1/05, 7:54 PM
Function setup (DVD)
Customizing the function settings
You can change the default settings to customize performance
to your preference.
SETUP
C/D/B/A
ENTER
RETURN
DVD
VCD
CD
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
To make SETUP screen disappear, press
SETUP or RETURN.
/Enter/Setup/Return
Press C or D to select the desired option.
Change the selection using B or A, by referring
to the corresponding pages 57~59.
Function setup (DVD)
Press B or A to select the desired section, then
press D or ENTER.
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing C
repeatedly.
55
2H20101A (E)p50-55
55
2/1/05, 7:55 PM
Function setup
Customizing the function settings (continued)
Setting details
Section
Option
Details
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if more than one language are available on
the disc.
E.B.L.
To select On or Off for E.B.L. (Enhanced Black
Level).
57
Tv Screen
To select a picture size according to the aspect
ratio of your TV.
57
Display
To turn on or de-activate the operational status display on the screen.
57
Picture Mode
To select a preferred picture mode from “Video”,
“Film” or “Auto”.
58
JPEG Interval
To select a preferred setting for the slide show playback.
58
Dialogue
To select On or Off for DRC (Dynamic Range Control).
58
QSound
To select On or Off for QSound.
58
Password
Input 4-digit password to set the parental level.
Parental
To select a preferred parental level for the parental
setting.
Select Files
To select a preferred file type for playing back a CD
containing a mixture of file types.
Output
To select a preferred video output signal from “Progressive” or “Interlace”.
Page
56
2H20101A (E)p56-59
56
2/1/05, 7:55 PM
57
59
Menu
Subtitle
Audio
English
English
English
E.B.L
Off
4:3
Tv Screen
On
Display
Auto
Picture Mode
JPEG Interval
Off
/Setup/Return
/Setup/Return
Menu, Subtitle, Audio
E.B.L.
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
“Language code list” $ ).
Original: (Audio)
The unit will select the first priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Notes:
• If the selected language is not recorded on the disc, the
first-priority language is selected.
• If you want to change the OSD language, you can perform
it by TV MENU ! .
To select the black level of playback pictures, set your
preference and monitor’s ability.
On: Enhanced grey scale (0 IRE cut off)
Off: Standard grey scale (7.5 IRE cut off)
Tv Screen
You have the following screen sizes to choose from:
4:3
(Letter box):
Select this mode when connecting to a conven
tional TV. When playing back a wide screen-DVD
disc, it displays the wide picture with black bands
at the top and bottom of screen.
(Pan scan):
4:3
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
Function setup (DVD)
16:9
(Wide):
Select this mode when connecting to a widescreen TV. A wide screen picture is displayed full
size.
Display
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
57
2H20101A (E)p56-59
57
2/1/05, 7:55 PM
Function setup (DVD)
Customizing the function settings (continued)
Setting details
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Film:
Select this position normally.
The DVD player automatically detects
source content, film or video, of
playback source, and converts that
signal in the progressive output format
in an appropriate method.
The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures. The
progressive output feature will be most
effective under this selection.
Video: The DVD player filters video signal,
and converts it in the progressive
output format appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select “Video”.
Dialogue
QSound
/Setup/Return
Dialogue
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
QSound
This DVD video player equipped with a “QSound”. It can
produce the effect of being in a cinema or a concert hall.
On: The QSound operates.
Off: The QSound is disengaged.
JPEG Interval
You can continuously play back all JPEG files automatically.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Note:
The QSound setting can also be changed with AUDIO on
the remote control # .
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
58
2H20101A (E)p56-59
Off: DRC (Std)
Off
58
2/1/05, 7:55 PM
Password
---Parental
Off
Select Files
All
Output
Interlace
/0Ð9/Enter/Clear/Setup/Return
Parental control setting
Some discs are specified not suitable for children. Such
discs can be limited not to play back with the unit.
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
To change the parental level
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B
or A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
2H20101A (E)p56-59
59
Select Files
When playing back a CD containing a mixture of MP3,
WMA and JPEG files, only MP3/WMA or JPEG files can
be displayed on the file menu.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
Output
You can select the video output signal of the DVD
video player to the TV from “Interlace” or “Progressive”.
1) Press C or D to select “Output”.
2) Press A, then press C or D to select “Interlace” or
“Progressive”.
Interlace:
Select when connecting to a composite TV or
a TV equipped with component video inputs
but progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped
with component video inputs, progressive
scan compatible.
3) Press ENTER.
Warning:
Once “Progressive” is selected when connecting to a
TV progressive scan incompatible, no image will be
seen on the video display.
In this case, you must reset the unit by pressing STOP
on the front panel for five seconds. The video output
will be restored to “Interlace” setting, and a picture will
once again be seen on a conventional analog display.
Function setup (DVD)
1) Press C or D to select “Parental”, then press B
or A until the level you require appears.
• Level Off: The parental control setting does not
function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting cannot be changed unless you enter the correct pass
word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See “Temporary disabling of rating level by
DVD disc” $ .)
4. While holding STOP down on the front panel,
press 7 on the remote control. “PASSWORD
CLEAR” appears on the screen.
5. Enter a new password again.
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteristics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
Note:
If each setup (pages 57~59) has been completed, the unit
can always be worked under the same conditions (especially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
59
2/1/05, 7:55 PM
Function setup (DVD)
OPEN/CLOSE
Temporary disabling of rating level by DVD disc
▲/▼
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
ENTER
RETURN
PLAY
0–9
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit " .
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press RETURN.
Please enter the
4 - digit password
Enter/0 9/Clear/Return
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
Reading
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
Playback will commence if the entered password was correct.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
If you wish to cancel the set rating level temporarily, select “Parental Control Level” with C or D, then
press ENTER. If the 4-digit password at step 2 on
page 59 has been set, the password entering screen
will appear as shown in step 4.
Alternatively, if the password has not been set, playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
60
2H20101A (E)p60-63
60
2/1/05, 7:55 PM
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” #% .
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance 2823
Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
Others
Language Name Code
61
2H20101A (E)p60-63
61
2/1/05, 7:55 PM
Others
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions.
Symptoms
Solutions
Page
DVD/VCR
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not set to the video
channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
equivalent).
• Channel is set to the external mode.
–
30,42
14~17
22
No sound.
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
14~19
–
31,44
The remote control does not function.
• Aim the remote control at the remote sensor.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
No Cable TV reception.
• Check all Cable TV connections.
• Station or Cable TV system problems, try another station.
16,17
TV recording does not work.
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
29,34
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER REC has not been pressed ( is not lit).
24
37
37
• Tracking adjustment beyond range of automatic tracking circuit. Try Manual
tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
31
Noise bars on screen.
Display is not shown in your language.
• Select proper language in the menu options.
57
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
42
DVD/VCR does not operate.
No picture.
14~19
–
–
13
VCR
31
–
DVD
Stopping playback, slow-motion play, repeat
play, or memory play, etc. cannot be
• Some discs may not do some of the functions.
performed.
–
No picture, or the screen is blurred or divided • The PROGRESSIVE scan is “On” although the unit is connected to a TV
via the VIDEO OUT or the S-VIDEO OUT jack.
into two parts.
59
No 4:3 (16:9) picture.
• The setup does not match your TV.
57
No on-screen display.
• Select Display “On”.
57
No surround sound.
• The setup does not match your stereo system.
20
The unit or remote operation key is not
functioning.
Playback does not start when the title is
selected.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
–
• Check the Parental setup.
59,60
Audio soundtrack and/or subtitle language
is not changed when you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
50,51
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
51
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
49
• The function is prohibited with the unit or the disc.
44
appears on the screen.
62
2H20101A (E)p60-63
62
2/1/05, 7:55 PM
Specifications
General
Power supply
Power consumption
Weight
Dimensions
Tuner
Antenna input/output
RF channel output
Color system
Video head
Audio track
Hi-Fi frequency response
Hi-Fi dynamic range
FF/REW time at 25˚C (77˚F)
Applicable disc
Frequency range
S/N ratio
Harmonic distortion
Wow and flutter
Operating conditions
AC 120 V 60 Hz
Operation: 18 W, Stand by: 2 W
7.7 lbs (3.5 kg)
Width: 16-15/16 inches (430 mm)
Height: 3-1/2 inches (89.5 mm)
Depth: 9-1/16 inches (230 mm)
181 channel freq. synthesized
VHF
2-13
UHF
14-69
Cable TV 113 Channels
UHF/VHF In/Out: 75 Ω coaxial
Channel 3 or 4, Switchable
NTSC
4 Rotary heads
Hi-Fi sound - 2 Tracks / MONO sound - 1 Track
20 Hz to 20,000 Hz
More than 90dB
Approx. 1 minute and 48 seconds (with T-120 Cassette Tape)
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz
90dB (DVD)
0.02% (DVD)
Less than 0.01% Wrms
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal
Input/Output
DVD/VCR
1.0 V (p-p), 75 Ω, negative sync., pin jack x 2
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
–8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 2
–8 dBm, 1 kΩ, negative sync., pin jack (L/R) x 1
Video input
Video output
Audio input
Audio output
DVD
S-video output
Component video output
Others
Audio output (BITSTREAM/PCM
COAXIAL)
Audio output (ANALOG)
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2
0.5 V (p-p), 75 Ω, pin jack x 1
–12 dBm, 1 kΩ, pin jacks (L, R) x 1
Supplied accessories
Audio/video cable ................................................. 1
Remote control (SE-R0170) ................................. 1
Batteries (R03/AAA) ............................................. 2
75 Ω coaxial cable ................................................ 1
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
63
2H20101A (E)p60-63
63
2/1/05, 7:55 PM
Others
Limited warranty
Limited United States Warranty
DVD Players - Exchange Warranty
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty
TACP warrants this DVD Player and its parts against
defects in materials or workmanship for period of ninety
(90) days after the date of original retail purchase.
DURING THE FIRST NINETY (90) DAYS AFTER THE
DATE OF ORIGINAL RETAIL PURCHASE, TACP
WILL EXCHANGE A DEFECTIVE DVD PLAYER
WITH A NEW OR REFURBISHED DVD PLAYER
WITHOUT CHARGE TO YOU. YOU MUST CONTACT
TACP'S CONSUMER SOLUTIONS CENTER FOR
INSTRUCTIONS ON HOW TO PROCESS YOUR IN
WARRANTY EXCHANGE REQUEST. THE CONSUMER IS RESPONSIBLE FOR ALL INBOUND
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER TO THE EXCHANGE
CENTER. DURING THE PERIOD THAT COMMENCES ON THE DATE THAT IS NINETY ONE (91)
DAYS AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE AND BEYOND, TACP WILL EXCHANGE
A DEFECTIVE DVD PLAYER WITH A NEW OR
REFURBISHED DVD PLAYER FOR A NOMINAL
FEE. YOU MUST CONTACT TACP'S CONSUMER
SOLUTIONS CENTER FOR INSTRUCTIONS ON
HOW TO PROCESS YOUR EXCHANGE REQUEST.
THE CONSUMER IS RESPONSIBLE FOR ALL
INBOUND TRANSPORTATION AND INSURANCE
CHARGES FOR THE DVD PLAYER TO THE EXCHANGE CENTER.
* Rental Units
The warranty for rental units begins with the first rental
or thirty (30) days after the date of shipment to the
rental firm, whichever comes first.
* Commercial Units
DVD Players sold and used for commercial purposes
have a limited ninety (90) day warranty for all parts and
labor.
64
2H20101A (E)p64-BACK
64
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this DVD Player. Complete and mail the enclosed
product registration card or register your product online at www.tacp.toshiba.com/service as soon as
possible. By registering your DVD Player you will
enable TACP to bring you new products specifically
designed to meet your needs and help us to contact
you in the unlikely event that a safety notification is
required under the Consumer Product Safety Act.
Failure to complete and return the product registration card does not diminish your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO
THE FOLLOWING CONDITIONS:
(1) You must retain your bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this product must be
made by an Authorized TACP Service Station.
(3) The warranties from TACP are effective only if
the product is purchased and operated in the
Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls and installation
or repair of antenna systems are not covered by
this warranty. Reception problems caused by
inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not
extend to any DVD Player or parts that have
been lost or discarded by you or to damage to
the DVD Player or parts caused by fires, misuse,
accident, Acts of God (such as lightning or
fluctuations in electric power), improper installation, improper maintenance, or use in violation of
instructions furnished by TACP; use or malfunction through simultaneous use of this product
and connected equipment; or to units that have
been modified or had the serial number removed, altered, defaced, or rendered illegible.
2/1/05, 7:55 PM
How to Obtain Warranty Services
If, after following all of the operating instructions in this
manual and checking the section "Troubleshooting,"
you fund that service is needed:
(1) For instructions on how to obtain warranty service
for exchange program DVD Players, contact
TACP's Call Center toll free at 1-866-583-7353.
(2) You must include the original bill of sale (or a copy
of the original bill of sale) or other proof of purchase along with the entire DVD Player when
sending the DVD Player to the Authorized TACP
Service Station specified by TACP's Call Center.
You must pay for all transportation and insurance
charges for the DVD Player to and from the
Authorized TACP Service Station.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO
STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, WHEN AN
ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE PROVISIONS
MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
For additional information, visit TACP's website:
www.tacp.toshiba.com
Others
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY LIMITED TO THE DURATION OF THE
LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED
BY THE LAW OF ANY STATE OF THE U.S.A. AS
HEREBY LIMITED, THE FOREGOING WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TACP WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF
ANY PARTS. IN NO EVENT SHALL TACP BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
MODIFICATION OR ERASURE OF RECORDED
DATA CAUSED BY USE, MISUSE OR INABILITY TO
USE THIS PRODUCT).
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to enforce
any obligation of TACP arising under the warranty or
under any statute, or law of the United States or any
state thereof, is hereby limited to ninety (90) days from
the date you discover or should have discovered, the
defect. This limitation does not apply to implied
warranties arising under state law.
65
2H20101A (E)p64-BACK
65
2/1/05, 7:55 PM
Others
Memo
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
66
2H20101A (E)p64-BACK
66
2/1/05, 7:55 PM
Memo
Others
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
67
2H20101A (E)p64-BACK
67
2/1/05, 7:55 PM
Printed in Thailand
2H20101A (E)p64-BACK
68
2/1/05, 7:55 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:06:30 01:54:18Z
Modify Date                     : 2005:06:30 10:56:49+09:00
Page Count                      : 68
Creation Date                   : 2005:06:30 01:54:18Z
Mod Date                        : 2005:06:30 10:56:49+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2005:06:30 10:56:49+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools