ORION ELECTRIC M4F2C VCR User Manual 4F11701A COV 07

ORION ELECTRIC CO., LTD. VCR 4F11701A COV 07

Manual

14 HEADVIDEO CASSETTE RECORDEROWNER'S MANUALBefore operating the unit, please read this manual thoroughly.ATTENTIONIf you purchase a universal remote control from your local retailer, please contact theremote manufacturer for the required programming code.TV/CATV MODE SELECTIONWhen shipped from the factory, the TV/CATV menu option is set to the "CATV" (CableTelevision) mode.If not using CATV (Cable TV), set this menu option to the "TV" mode. 4F11701A COV-07 10/16/01, 1:35 PM1W525
2The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance.WARNING: This equipment has been tested and foundto comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or television recep-tion, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct theinterference by one or more of the following measures:WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAINOR MOISTURE.CAUTION:The lightning flash with arrowhead symbolwithin an equilateral triangle is intended toalert the user to the presence of uninsulateddangerous voltage within the product'senclosure that may be of sufficient magnitudeto constitute a risk of electric shock.21. READ INSTRUCTIONSAll the safety and operating instructions should beread before the unit is operated.2. RETAIN INSTRUCTIONSThe safety and operating instructions should beretained for future reference.3. HEED WARNINGSAll warnings on the unit and in the operatinginstructions should be adhered to.4. FOLLOW INSTRUCTIONSAll operating and use instructions should be followed.5. CLEANINGUnplug this unit from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners.Use a damp cloth for cleaning.6. ATTACHMENTSThe manufacturer of this unit does not make anyrecommendations for attachments, as they may causehazards.IMPORTANT SAFEGUARDSPORTABLE CART WARNING(symbol provided by RETAC)S3125A- Reorient or relocate the receiving antenna.-Increase the distance between the equipment and receiver.- Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV techni-cian for help.CAUTION: Changes or modifications not expresslyapproved by the party responsible for compliance withthe FCC (Federal Communications Commission) Rulescould void the user's authority to operate this equipment.COPYRIGHT: It is permissible to record televisionprograms, films, video tapes and other material only inthe event that third party copyrights and other rights arenot violated.7. WATER AND MOISTUREDo not use this unit near water. For example, near abathtub, washbowl, kitchen sink, or laundry tub, in awet basement, or near a swimming pool.8. ACCESSORIESDo not place this unit on an unstable cart, stand,tripod, bracket, or table. The unit may fall, causingserious injury, and serious damage to the unit.8A. An appliance and cart combination should be movedwith care. Quick stops, excessive force, and unevensurfaces may cause the appliance and cart combina-tion to overturn.TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTION 4F11701A COV-07 10/16/01, 1:35 PM2
339. VENTILATIONSlots and openings in the cabinet back or bottomare provided for ventilation and to ensure reliableoperation of the unit and to protect it from overheating.These openings must not be blocked or covered.The openings should never be blocked by placingthe unit on a bed, sofa, rug, or other similar surface.This unit should never be placed near or over aradiator or heat source. This unit should not beplaced in built-in installation such as a bookcase orrack unless proper ventilation is provided or themanufacturer's instructions have been adhered to.10. POWER SOURCESThis unit should be operated only from the type ofpower source indicated on the rating plate. If you arenot sure of the type of power supply to your home,consult your appliance dealer or local power com-pany. For units intended to operate from batterypower, or other sources, refer to the respectivepages on this Owner's Manual for their operatinginstructions.11. GROUNDING OR POLARIZATIONThis unit is equipped with a polarized alternating-current line plug (a plug having one blade wider thanthe other). This plug will fit into the power outlet onlyone way. This is a safety feature. If you are unableto insert the plug fully into the outlet, try reversingthe plug. If the plug should still fail to fit, contact yourelectrician to replace your obsolete outlet. Instead ofthe polarized alternating-current line plug, your unitmay be equipped with a 3-wire grounding-type plug(a plug having a third (grounding) pin). This plug willonly fit into a grounding-type power outlet. This too,is a safety feature. If you are unable to insert theplug into the outlet, contact your electrician toreplace your obsolete outlet.Do not defeat the safety purpose of the grounding-type plug.12. POWER-CORD PROTECTIONPower-supply cords should be routed so that theyare not likely to be walked on or pinched by itemsplaced upon or against them, paying particularattention to cords at plugs, convenience receptacles,and the point where they exit from the appliance.13. LIGHTNINGTo protect your unit from a lightning storm, or whenit is left unattended and unused for long periods oftime, unplug it from the wall outlet and disconnectthe antenna or cable system. This will preventdamage to the unit due to lightning and power linesurges.14. POWER LINESAn outside antenna system should not be located inthe vicinity of overhead power lines or other electriclight or power circuits, or where it can fall onto oragainst such power lines or circuits. When installingan outside antenna system, extreme care should betaken to keep from touching such power lines orcircuits, as contact with them might be fatal.15. OVERLOADINGDo not overload wall outlets and extension cords, asthis can result in a risk of fire or electric shock.16. OBJECT AND LIQUID ENTRYDo not push objects through any openings in this unitas they may touch dangerous voltage points or shortout parts that could result in fire or electric shock.Never spill or spray any type of liquid into the unit.17. OUTDOOR ANTENNA GROUNDINGIf an outside antenna or cable system is connectedto the unit, be sure the antenna or cable system isgrounded to provide some protection against voltagesurges and built-up static charges. Section 810 ofthe National Electrical Code (NEC) ANSI/NFPA 70,provides information with respect to proper groundingof the mast and supporting structure, grounding ofthe lead-in wire to an antenna discharge unit, size ofgrounding conductors, location of antenna dischargeunit, connection to grounding electrodes, andrequirements for the grounding electrode.18. SERVICINGDo not attempt to service this unit yourself asopening or removing covers may expose you todangerous voltage or other hazards. Refer allservicing to qualified service personnel.IMPORTANT SAFEGUARDS 4F11701A COV-07 10/16/01, 1:35 PM3
4EXAMPLE OF ANTENNA GROUNDING AS PER THENATIONAL ELECTRICAL CODEFor example:a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have falleninto the unit.c. If the unit has been exposed to rain or water.d. If the unit does not operate normally by followingthe operating instructions. Adjust only thosecontrols that are covered by the operatinginstructions, as an improper adjustment of othercontrols may result in damage and will oftenrequire extensive work by a qualified technicianto restore the unit to its normal operation.e. If the unit has been dropped or the cabinet hasbeen damaged.f. When the unit exhibits a distinct change inperformance, this indicates a need for service.19. REPLACEMENT PARTSWhen replacement parts are required, be sure theservice technician uses replacement parts specifiedby the manufacturer or those that have the samecharacteristics as the original parts.Unauthorized substitutions may result in fire, electricshock or other hazards.20. SAFETY CHECKUpon completion of any service or repairs to thisunit, ask the service technician to perform safetychecks to determine that the unit is in properoperating condition.21. HEATThe product should be situated away from heatsources such as radiators, heat registers, stoves, orother products (including amplifiers) that produce heat.22. NOTE TO CATV SYSTEM INSTALLERThis reminder is provided to call the CATV systeminstaller's attention to Article 820-40 of the NEC thatprovides guidelines for proper grounding and, inparticular, specifies that the cable ground shall beconnected to the grounding system of the building,as close to the point of cable entry as practical.IMPORTANT SAFEGUARDSANTENNA DISCHARGE UNIT(NEC SECTION 810-20)ANTENNA LEAD IN WIREGROUND CLAMPELECTRIC SERVICEEQUIPMENTGROUNDING CONDUCTORS(NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)NEC-NATIONAL ELECTRICAL CODES2898A 4F11701A COV-07 10/16/01, 1:35 PM4
5 MOISTURE CONDENSATIONDO NOT OPERATE THIS VCR FOR AT LEAST THREEHOURS WHEN MOISTURE IN THE AIR CONDENSESON THE VCR.WHAT IS MOISTURE CONDENSATION?When a cold liquid is poured into a glass, for example,water vapor in the air will condense on the surface of theglass. This is called moisture condensation.MOISTURE WILL CONDENSE ON THE UNIT IN THEFOLLOWING CASES;•When you move this VCR from a cold to a warm place.•After heating a cold room or under extremely humidconditions.WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,Plug the power cord into an AC outlet, press the POWERbutton to turn on and leave the unit at room temperatureuntil moisture condensation disappears.Depending on the surrounding conditions, this may taketwo or three hours. POWER SOURCETO USE AC POWER SOURCEUse the AC polarized line cord provided for operation onAC. Insert the AC cord plug into a standard 120V 60Hzpolarized AC outlet.NOTES:1. Never connect the AC line cord plug to other than thespecified voltage (120V 60Hz). Use the attachedpower cord only.2. If the polarized AC cord does not fit into a non-polarizedAC outlet, do not attempt to file or cut the blade. It is theuser’s responsibility to have an electrician replace theobsolete outlet.PRECAUTIONS•If you cause a static discharge when touching the VCR,and the VCR fails to function, simply unplug the unitfrom the wall outlet, wait 10 minutes and plug it backin. The VCR should return to normal operation.•Avoid extreme heat or cold. (41˚F/5˚C-104˚F/40˚C)•Do not place the VCR on or near appliances whichmay cause electromagnetic interference, e.g. TV,speakers, etc. Doing so may cause erratic operationof the VCR including picture and/or sound distortion ornoise.•Avoid extreme moisture and dust.•The ventilation holes prevent overheating. Do notblock or cover these holes. Especially avoid coveringthe holes with soft materials such as cloth or paper.•Do not insert fingers or any other objects into thecassette loading slot. Do not spray cleaner or waxdirectly on the VCR or use forced air to remove dust.•Avoid places subject to strong vibration. Use in ahorizontal (flat) position only.•Keep the VCR away from flower vases, sinks, etc.If liquids should be spilled into the VCR, seriousdamage will result. If you spill any liquids into theVCR, unplug the AC power cord immediately andconsult qualified service personnel before attemptingto use the VCR again.•When you finish operating the VCR, always unloadthe cassette and turn off the power.•When you leave your home for a long time, unplug theAC power cord.•To protect the VCR from a lightning storm, unplug theAC power cord from the wall outlet and disconnect theantenna.Polarized AC Cord Plug(One blade is wider than the other)AC OutletWider Holeand Blade 4F11701A COV-07 10/16/01, 1:35 PM5
6High Quality Picture Technology - This video cassetterecorder marked "HQ" incorporates VHS high qualitytechnology. A built-in detail enhancer is used to boostthe recorded signal and provide maximum picturequality in playback. It is compatible with other VHS videocassette recorders.4 Video Heads - Provides optimal picture quality forspecial effects playback.8-Program/1-Month Programmable Timer withEveryday/Every Week Capability - The built-in timerallows automatic absentee recording of up to 8 TVprograms within 1month. It is also possible to record aprogram which is broadcast at the same time everydayor every week.On-Screen Display and Programming - When youselect a channel or make other changes, the TV willshow an indicator on the screen for a few seconds.Clock settings, timer setting and other set-up operationscan be carried out using the on-screen display menusystem.Digital Auto Tracking - Automatically adjusts trackingduring playback for the best possible picture.181 Channel Tuner - Receives standard VHF and UHFbroadcast channels and up to 113 cable channels.One-touch Timer Recording (OTR) - Simply bypressing the REC button, the VCR can be programmedfor up to 5 hours of recording with an immediate start.Automatic Power On - When loading a cassette tape,this VCR will automatically turn on.Automatic Playback - When loading a cassette tape with-out the erase prevention tab, this VCR will automaticallyturn on and play back the cassette tape at the correctspeed.Automatic Rewind-Stop-Eject-Power Off - When atape reaches its end during playback and recording, itwill automatically stop, rewind, stop, eject the tape andthe VCR will turn off.•Open the batterycompartment cover.•Install two "AAA"batteries.•Replace the cover. BATTERY INSTALLATION BATTERY CAUTIONSFollow these precautions when using batteries in thisdevice:•Use only the size and type of batteries specified.•Be sure to follow the correct polarity when installingthe batteries as indicated in the battery compartment.Reversed batteries may cause damage to the device.•Do not mix different types of batteries together (e.g.Alkaline and Carbon-zinc) or old batteries with freshones.•If the device is not to be used for a long period oftime, remove the batteries to prevent damage orinjury from possible battery leakage.•Do not try to recharge batteries not intended to berecharged; they can overheat and rupture (Followbattery manufacturer's directions). EFFECTIVE DISTANCE OF THE REMOTE CONTROLNOTES: •When direct sunlight, an incandescent lamp,fluorescent lamp or any other strong lightshines on the Remote Sensor, the remoteoperation may be unstable.•When there is an obstacle between the VCRand the remote control, the remote controlmay not operate.30˚30˚15 FEETPRECAUTIONS FEATURES 4F11701A COV-07 10/16/01, 1:35 PM6
7Automatic Repeat Play System - When the AUTOREPEAT option is turned on, this VCR will automaticallyplay back the same cassette tape repeatedly.On-Screen 3 Language Display - This TV can displaythe on screen language in English, Spanish or French.Slow Motion - This VCR provides slow motion which of-fers steady, noise free playback at 1/10 normal speed.Frame by Frame Advance - Press the SLOW buttonduring still playback to advance the tape one frame ata time.Real Time Tape Counter - The counter displays on thescreen the elapsed time in hours, minutes and secondsand can be used to locate programs.2 Speed Picture Search - 3 or 5 times normal speed inSP mode (7X or 9X in LP and 9X or 15X in SLP).3 Speed Playback - Plays three tape speeds (SP, LP,SLP).2 Speed Record - Records two tape speeds (SP, SLP).Front Audio/Video In Jacks - A VCR or other videodevice may be hooked up for dubbing.CAUTIONSFEATURES ................................................................ 6LOCATION OF CONTROLS ...................................... 8BASIC CONNECTIONS ........................................... 10CATV (CABLE TV) CONNECTIONS ....................... 12AUDIO/VIDEO CONNECTIONS .............................. 14SETTING THE VIDEO CHANNEL ........................... 15LANGUAGE SELECTION ........................................ 15SETTING THE CLOCK ............................................ 15SETTING THE CHANNELS ..................................... 16NOISE ELIMINATION .............................................. 16PLAYBACKRECORDINGRECORDING A TV PROGRAM............................... 18ONE-TOUCH TIMER RECORDING (OTR) ............. 20SETTING THE TIMER RECORDING ...................... 20LOADING AND UNLOADING .................................. 17PLAYBACK .............................................................. 17SPECIAL PLAYBACK .............................................. 18ON-SCREEN FUNCTION DISPLAY ........................ 21DUPLICATING A VIDEO TAPE ............................... 22VIDEO HEAD CLEANING ........................................ 23BEFORE REQUESTING SERVICE ......................... 24SPECIFICATIONS ................................................... 25WARRANTY............................................................. 26ADDITIONAL INFORMATIONIMPORTANT SAFEGUARDS .................................... 2PRECAUTIONS ......................................................... 5PREPARATIONTABLE OF CONTENTS 4F11701A COV-07 10/16/01, 1:35 PM7
8TV/VCR SP/SLPSLOWMENUREWRECPAUSE/STILLCHANNELFFSETENTERSTOPPLAY1234567089– TRACKING +DISPLAYCANCELCOUNTERRESETDIGITALTRACKINGTIMERINPUTSELECTPOWERVIDEOLINE 2 INAUDIOTV/VCRT.REC REC POWERREC CHANNELPOWERPLAYSTOP / EJECTREW FFFRONTLOCATION OF CONTROLSREMOTE CONTROL113 12 11 10 914 5742372927262524231. Cassette Loading Slot - To insert or remove avideo tape.2. REW button - In the STOP mode, this buttonrapidly winds the tape backwards. In the PLAYmode, this button activates Reverse Search.3. PLAY button - Press to play a prerecorded tape.4. FF button - In the STOP mode, this button rapidlywinds the tape forward. In the PLAY mode, thisbutton activates Forward Search.5. POWER button - Turns the VCR power on and off.6. STOP/EJECT button - Press once to stop the tapein any mode. Press again to eject the tape.7. CHANNEL ▼ / ▲ buttons - Used to select achannel for viewing or recording.8. REC button - Press once to start normal recording.Additional presses activate One-touch TimerRecording. 9. Remote Sensor - Signals from the Remote Controlare received here.10. POWER indicator - Lights up when the power isturned on.11. REC indicator - Lights up during recording.12. T. REC indicator - Lights when the unit is in theTimer Record mode.13. TV/VCR indicator - Lights up when the TV/VCRselector button is selected to the VCR mode.14. AUDIO/VIDEO IN (LINE 2) Jacks - Audio andvideo signal cables from an external source can beconnected here.4285158321617182021198 622 4F11701A P08-13 10/16/01, 1:34 PM8
9UHF/VHFOUT(TV)IN(ANT)AUDIOREAR15. Direct Channel Selection buttons (0-9) - Allowsdirect access to any channel.16. STOP button - Press to stop the tape.17. MENU button - Press to display the on-screen menufunction.18. TRACKING SET + / – buttons - During playback, theyare used to adjust tracking manually. Used to set oradjust in the menu mode.19. TIMER button - Used to set the VCR to start record-ing at a preset time.20. SLOW button - Press to play back a tape in slow mo-tion or to advance the tape one frame at a time duringstill playback.21. COUNTER RESET button - Resets the Real TimeTape Counter to 00:00:00.22. TV/VCR selector button - Switches between TVand VCR.23. PAUSE/STILL button - During recording, thisbutton temporarily stops the tape. The "" willappear on the screen. During playback, it stops thetape and displays a still image on the TV screen.24. ENTER button - Used to enter the information in themenu mode.25. DIGITAL TRACKING button - Allows automaticadjustment of tracking to minimize picture noiseduring playback.26. CANCEL button - Used to clear the selected timerrecording program.27. INPUT SELECT button - Switches the program forviewing between the VCR and external inputsources.28. DISPLAY button - Displays the present time/day ofthe week, channel, counter, speed selection and VCRmode on the TV screen.29. SP/SLP selector button - Sets the tape speed forrecording.30. AUDIO VIDEO OUT Jacks - Use to output audio andvideo signal to a TV, amplifier or VCR.31. UHF/VHF IN (ANT) Jack - Connect a UHF/VHFantenna or CATV cable to this jack.32. UHF/VHF OUT (TV) Jack - Use to output UHF/VHFor CATV signal to a TV.33. AUDIO/VIDEO IN (LINE1) Jacks - Audio and videosignal cables from an external source can be con-nected here.34. AC Power Cord - Connect to a 120V 60Hz outlet.3430 3133 32 4F11701A P08-13 10/16/01, 1:34 PM9VIDEOOUT LINE1
10OUTINOUTINOUTINNOTES: •A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to theVCR properly.•For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of anoutdoor type antenna is required.•If you are not sure about the connection, please refer to qualified service personnel.If you are using an antenna system, follow the instructions. If you are a cable (CATV) subscriber,skip ahead topage 12 for the proper connections. ANTENNA TO VCR CONNECTIONThe VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connectit to the VCR. Then connect the VCR to the TV. Below are 3 common methods of connecting an antenna system to aVCR. Find the type of antenna system you are using and follow the connection diagram.If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohminputs and one 75 ohm output.NOTE:BASIC CONNECTIONSCombination VHF/UHF Antenna with 75 ohm Coaxial CableCombination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) WireSeparate VHF and UHF Antennas123VCRVCRVCRVHF UHF300 ohm Twin Lead (Flat) WireMatching Transformer 300 ohm Input75 ohm output(not supplied)300 ohm Twin Lead (Flat) Wire75 ohm Coaxial Cable75 ohm Coaxial CableCombiner75/300 ohm Inputs75 ohm output(not supplied) 4F11701A P08-13 10/16/01, 1:34 PM10
11UHFVHFOUTINUHFVHFOUTINOUTINVHF/UHF INNOTE: If a VHF or UHF antennais used, set the TV/CATVmenu option to the "TV"mode.NOTE: If a VHF or UHF antennais used, set the TV/CATVmenu option to the "TV"mode.NOTE: If a VHF or UHF antennais used, set the TV/CATVmenu option to the "TV"mode.75 ohm Coaxial Cable (supplied)Splitter75 ohm Input75/300 ohm outputs(not supplied)Splitter75 ohm Input300 ohm outputs(not supplied)TV with single 75 ohmVHF/UHF antenna inputTV with 300 ohm UHFand 75 ohm VHFantenna inputsTV with 300 ohm UHFand 300 ohm VHFantenna inputs VCR TO TV CONNECTIONAfter you have connected the antenna to the VCR, you must connect the VCR to the TV.Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow theconnection diagram.This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs(numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception.TVTVTV75 ohm Coaxial Cable(supplied)75 ohm Coaxial Cable(supplied) 4F11701A P08-13 10/16/01, 1:34 PM11
12VHF/UHFIN (ANT)OUTINMany cable companies offer services permitting reception of extra channels including pay or subscription channels.This VCR has an extended tuning range and can be tuned to most cable channels without using a cable companysupplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a specialchannel which is scrambled, you must have a descrambler box for proper reception.CATV (CABLE TV) CONNECTIONSNOTE: Whenever a Converter/Descrambler box is placed before the VCR, you must tune the VCR to the output ofthe Converter/Descrambler box, usually channel 3 or 4.ALLOWS: *Recording of nonscrambled channels.*Use of the programmable timer.*Recording of one channel while watching another.ALLOWS: *Recording of channels through the converter box(scrambled and unscrambled).*Using the programmable timer to record only thechannel selected at the converter box.PREVENTS: *Recording one channel while watching another.*Using the VCR tuner to select channels.12VCRIncoming CableTVVHF/UHFIN (ANT)OUTINVCRConverter/DescramblerIncomingCableTVVHF/UHFIN (ANT)OUTINVCRIncoming Cable Converter/DescramblerTV3ALLOWS: *Recording of nonscrambled channels.*Use of the programmable timer.*Recording an unscrambled channel while watchingany channel selected at the converter box.PREVENTS: Recording scrambled channels.To record from converter/descrambler, VCRtuner must be tuned to the converter outputchannel, usually channel 3 or 4.If you are playing a tape or using the tunerbuilt into the VCR, the converter must be setto the video channel output of the VCR(either 3 or 4).NOTE:NOTE: 4F11701A P08-13 10/16/01, 1:34 PM12
13This VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambledprograms, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consultyour local cable company for more information concerning connection to their descrambler equipment. There aremany ways to connect your VCR to a cable system. Below are six common methods of connection.IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.IncomingCable456ALLOWS: *Recording of one channel while watching another.*Using the programmable timer to record only the channel selected at the converter box.*Recording of all channels through the converter box.PREVENTS: *Watching scrambled channels while recording another channel.*Using the VCR tuner to select channels.VHF/UHFIN (ANT)ABOUTINVCRSplitterConverter/DescramblerTVVHF/UHFIN (ANT)ABOUTINVCRConverter/DescramblerA/B SwitchTVIncomingCableSplitterALLOWS: *Recording of nonscrambled channels.*Recording of one channel while watching another.*Watching premium channels through the converter while recording nonscrambled channels.*Using the programmable timer.PREVENTS: Recording scrambled channels.ALLOWS: *Recording of all channels through the converter box.*Recording a scrambled or unscrambled channel while watching another (scrambled orunscrambled) channel.*Using the programmable timer to record only the channel selected at the converter box.PREVENTS: Using the VCR tuner to select channels.VHF/UHFIN (ANT)ABOUTINVCRA/B SwitchSplitterTVIncomingCableConverter/DescramblerConverter/DescramblerA/B Switch 4F11701A P08-13 10/16/01, 1:34 PM13
14OUTINOUTINWhen you connect your VCR to a Stereo Component System, you can view the picture from the VCR whileenjoying powerful sound from your audio system.NOTE: Sound will be monaural.If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher qualitypicture and sound. If you have a stereo, you can connect a stereo amplifier to enjoy powerful sound.To AUX (R) INTo AUX (L) INTo AUDIO OUTTo VIDEO OUTTo VIDEO INTo ANT INTo UHF/VHF OUT TVAUDIO Cord (not supplied)AUDIO/VIDEO CONNECTIONSAUDIO/VIDEO CONNECTION1. Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV.2. Connect the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on the TV.3. Set the VIDEO/TV selector of your TV to "VIDEO".STEREO AMPLIFIER CONNECTIONSConnect the AUDIO OUT jacks on the VCR to the AUX IN jacks on the stereo amplifier.VCR To UHF/VHF INFrom ANTENNA/CATV systemVIDEO Cord(not supplied)To AUDIO OUTAUDIO/VIDEO Cord (not supplied)To VIDEO IN To AUDIO INTo ANT INTo UHF/VHF OUT TVVCR To UHF/VHF INFrom ANTENNA/CATV system 4F11701A P14-19 10/16/01, 1:34 PM14To VIDEO OUT
15SETTING THE VIDEOCHANNELFor a push-button TV tunerIf CH 3 or 4 corresponding to the video channel cannotbe tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back aprerecorded tape and tune the TV to receive a sharpcolor picture from the video cassette recorder. Refer toyour TV owner's manual for details.To view playback of a recorded tape, or to watch aprogram selected by the VCR's channel selector, theTV must be set to channel 3 or 4 (video channel).When a TV is connected with the 75 ohm coaxial cableonly.1During power off, press and hold the “3” or “4”number button on the remote control for 3 seconds.The “TV/VCR” indicator will flash 4 times.2Turn ON the VCR POWER button.3Turn ON the TV and set to CH 3 or 4 to correspondwith the channel selected in step 1.4Press the TV/VCR selector button to select the VCRposition.The TV/VCR indicator will light.5Select any channel to receivea TV station in your area.The channel number willappear on the screen for about4 seconds.CH 1254This VCR can display on the TV screen in theEnglish, Spanish or French languages.CHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn ON the VCR POWER button.•Press the TV/VCR selector button to select the VCRmode.When a TV is connected with an audio/video cable,turn the TV and this VCR on and select the video inputmode on the TV.2Press the TRACKING SET +or – button to select thedesired language: English(ENGLISH), Spanish(ESPAÑOL) or French(FRANCAIS), then press theENTER button.3Press the MENU button until the menu screen iscleared.⟨+/–/ENTER/MENU⟩LANGUAGE/IDIOMA/LANGUEENGLISHFRANCAISESPAÑOL1Press the MENU button.Press the TRACKING SET +or – button to select theLANGUAGE option, thenpress the ENTER button.SETTING THE CLOCK1MONTHDAYTIMEYEAR3112(THU): 00 AM2000+/–/ENTER/CANCEL/MENU⟨+/–/ENTER/CANCEL/MENU⟩MONTHDAYTIMEYEAR3298(FRI): 30 AM20022NOTES: • After a power failure or disconnection of thepower, the timer settings will be lost. In thiscase, reset the present time.•Press the CANCEL button to move cursorbackward for correction.•If you want to correct time or date while theclock is functioning, press the MENU button,then press TRACKING SET + or – button toselect the CLOCK SET option, then press theENTER button.To make any adjustments perform steps 2through 3.1Press the MENU button. Pressthe TRACKING SET + or –button to select the CLOCK SEToption, then press the ENTERbutton.2Press the TRACKING SET + or– button to set the month, thenpress the ENTER button.3Set the day, year and time as inStep 2.•The day of the week willautomatically appear whenyou set the year.•Press and hold down thebutton to increase/ decreasethe minute by 10.•Auto date and time startfunctioning when you finishsetting.You must set the date and time manually for timerrecordings.EXAMPLE: Setting the clock to "8:30 AM" March, 29(FRI), 2002.CHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn ON the VCR POWER button.•Press the TV/VCR selector button to select the VCRmode.When a TV is connected with an audio/video cable, turnthe TV and this VCR on, and select the video inputmode on the TV.LANGUAGE SELECTION⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SETON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUND⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SETON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUND 4F11701A P14-19 10/16/01, 1:34 PM15
16AUTOMATIC MEMORY TUNING⟨+/–/ENTER/MENU⟩CH SET UP TV CATVAUTO CH MEMORYADD/DELETETO ADD/DELETE CHANNELS1Press the MENU button.Press the TRACKING SET +or – button to select the CHSET UP option, then press theENTER button.2Press the TRACKING SET + or– button to select the ADD/DE-LETE mode, then press theENTER button.3Select the desired channels tobe added or deleted using theTRACKING SET + or – button.4Press the ENTER button if youwish to DELETE the channelfrom memory.Press the ENTER button ifyou wish to ADD theunmemorized channel.Repeat Steps 3 and 4 for each channel to be addedor deleted.5 Press the MENU button three times after adding ordeleting all of the desired channels, to return tonormal TV viewing.When you don't want to receive a weak signalbroadcast, the Blue back screen can be obtained byselecting the NO NOISE BACKGROUND "ON". Whenthe unit is shipped from the factory, the NO NOISEBACKGROUND is set to the "ON" position.CHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn ON the VCR POWER button.•Press the TV/VCR selector button to select the VCRmode.When a TV is connected with an audio/video cable,turn the TV and this VCR on and select the video inputmode on the TV.⟨+/–/ENTER/MENU⟩ADD CH 002⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUND⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUND⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUNDCHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn ON the VCR POWER button.•Press the TV/VCR selector button to select the VCRmode.When a TV is connected with an audio/video cable, turnthe TV and this VCR on, and select the video input modeon the TV.⟨+/–/ENTER/MENU⟩CH SET UP TV CATVAUTO CH MEMORYADD/DELETE1Press the MENU button.Press the TRACKING SET +or – button to select the CHSET UP option, then pressthe ENTER button.2Press the TRACKING SET +or – button to select theAUTO CH MEMORY mode,then press the ENTER button.3The auto tuning will start. Thechannel display will count upand when finished, the screenreturns to normal.The VCR can receive a maximum of 181 channels bypresetting the channels into memory.SETTING THE CHANNELS1Press the MENU button.2Press the TRACKING SET +or – button to select the CHSET UP option, then press theENTER button.3Press the TRACKING SET +or – button to select the TV/CATV mode.4Press the ENTER button toselect the TV or CATV mode.The arrow indicates theselected mode.5Press the MENU button twice to return to normal TVviewing.TV/CATV SELECTION⟨+/–/ENTER/MENU⟩CH SET UP TV CATVAUTO CH MEMORYADD/DELETECH 001This VCR is equipped with a channel memory featurewhich allows channels to skip up or down to the nextchannel set into memory, skipping over unwantedchannels. Before selecting channels, they must beprogrammed into the VCR’s memory. In addition tonormal VHF and UHF channels, this VCR can receiveup to 113 Cable TV channels. To use this VCR with anantenna, set the TV/CATV menu option to the TV mode.When shipped from the factory, this menu option is inthe CATV mode.⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUND⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUNDNOISE ELIMINATION1Press the MENU button, thenpress the TRACKING SET + or– button to select the NONOISE BACKGROUND option.2Press the ENTER button toselect the ON position.3Press the MENU button again.TV - VHF/UHF channelsCATV - CABLE TV channels 4F11701A P14-19 10/16/01, 1:34 PM16
17 TO REWIND OR FORWARD THE TAPE RAPIDLYPress the REW button in theSTOP mode."" will appear on the screen forabout 4 seconds.Press the FF button in the STOPmode."" will appear on the screen forabout 4 seconds.When a tape is played, the Digital Auto Tracking Systemautomatically adjusts the tracking to obtain the bestpossible picture. If noise bars appear during playback,adjust the tracking manually:•Press the TRACKING SET + or – button to obtain thebest possible picture. To resume automatic tracking,press the DIGITAL TRACKING button.FORWARD/REVERSE PICTURE SEARCHIf you want to see the tape program during REW or FFmode, press and hold the REW or FF button again. Thebackward or forward visual search picture will be seenon the screen. Release the button to return to the REWor FF mode. DIGITAL TRACKING CONTROL TO START PLAYBACK TO STOP PLAYBACKCHECK BEFORE YOU BEGINTurn ON the TV and set to the video channel 3 or 4.When a TV is connected with an audio/video cable,turn the TV and this VCR on and select the video inputmode on the TV.1Load a prerecorded tape(When loading a cassette tapewithout the erase preventiontab, playback will start auto-matically).2Press the PLAY button.Playback will start."" will appear on the screenfor about 4 seconds.Press the STOP button once.The tape will stop but remain fullyloaded and ready to play." " will appear on the screen forabout 4 seconds.LOADING UNLOADINGUse only video cassette tapes marked .Push the center of the tape until itis automatically retracted.AUTOMATIC POWER ONThe VCR will turn on automaticallyand the POWER indicator will light.AUTOMATIC PLAYWhen loading a cassette tape without the erase preven-tion tab, playback will start immediately.Insert the cassette with its labeled side facing you. Aninverted cassette cannot be inserted.To unload a cassette, press theSTOP/EJECT button on the VCRtwice. The first press will stop thetape in any mode. The secondpress will eject the tape. " " willappear on the screen for about 4seconds.AUTOMATIC EJECTIf the VCR automatically rewinds the tape to the begin-ning (AUTO REWIND FEATURE), the tape will beejected automatically (See the NOTE on page 19).To play a prerecorded cassette tape.NOTES: •Always eject the tape when not in use.•The cassette can be ejected even if the VCRis turn off.This VCR selects the playback tape speed SP, LP orSLP automatically.LOADING AND UNLOADINGPLAYBACK 4F11701A P14-19 10/16/01, 1:34 PM17
18 RECORDING AND VIEWING THE SAME TV PROGRAMCHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn ON the VCR POWER button.•Press the TV/VCR selector button to select theVCR mode.When a TV is connected with an audio/video cable, turnthe TV and this VCR on and select the video input modeon the TV.1Load a cassette tape with theerase prevention tab intact.The VCR will automaticallyturn on.2Press the SP/SLP button toselect the desired tape speedSP or SLP.The counter and SP or SLPwill appear on the screen forabout 4 seconds. TO WATCH A TAPE REPEATEDLYNOTE: To cancel repeat mode, follow the above steps1 and 2, then press the ENTER button to selectthe OFF position. Press the MENU button toreturn to the TV.CHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn ON the VCR POWER button.•Press the TV/VCR selector button to select the VCRmode.When a TV is connected with an audio/video cable,turn the TV and this VCR on, and select the video inputmode on the TV. SLOW MOTION PLAYBACKPress the SLOW button in the PLAYBACK mode.Playback will proceed at 1/10th of the normal speed.Press the PLAY button again to resume normal playback.NOTE: SLOW TRACKING AND VERTICAL LOCKADJUSTMENTIf noise bars appear in the picture during slow motion,press the TRACKING SET + or – button to reduce thenoise bars.If the still picture jitters excessively, press theTRACKING SET + or – button to stabilize the stillpicture." " will appear if you press the DISPLAY button.To cancel, press the DISPLAY button again.1Press the MENU button.Press the TRACKING SET +or – button to select the AUTOREPEAT option.2Press the ENTER button toselect the ON position.3Press the MENU button.If you press the PLAY button, thetape will play over and over untilthe repeat mode is canceled.⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUND⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SET ON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE ON OFFNO NOISE BACKGROUNDSPECIAL PLAYBACK TO VISUALLY SEARCH FOR DESIRED POINTSWhen either the FF or REW button is pressed in thePLAYBACK mode, the speed search picture will appear.When pressed twice, the search picture will increasespeed. Speed search time depends upon the speedused (SP, LP or SLP) during recording. FRAME BY FRAME ADVANCEPress the PAUSE/STILL button in the PLAYBACK mode.Press the PAUSE/STILL button again to resume normalplayback.Press the SLOW button during STILL playback.The still picture will advance by one frame each timeyou press the button. Hold the button for continuousframe by frame viewing.Press the PAUSE/STILL button again to resume normalplayback.NOTES: •A few noise bars will appear on the pictureduring SPEED SEARCH and STILL.•The audio output is muted during SPEEDSEARCH, STILL, FRAME ADVANCE andSLOW MOTION.•To prevent damage to the tape, specialplayback is automatically changed to thePLAYBACK mode after 5 minutes.RECORDING A TVPROGRAM00 : 00 : 00 SP TO WATCH A STILL PICTURE 4F11701A P14-19 10/16/01, 1:34 PM18
194Press the REC button." ● " will appear on the screenfor about 4 seconds and theREC indicator will light.Press the PAUSE/STILL buttonto avoid recording unwantedmaterial. Press again or pressthe REC button to continue therecording.Press the STOP button to stoprecording." ■ " will appear on screen forabout 4 seconds. TO STOP RECORDING TO STOP RECORDING TEMPORARILYNOTE: AUTO REWIND FEATUREThis VCR will automatically rewind the tapewhen the tape has ended (except during OTRand TIMER REC). It will also eject the tape andturn the VCR’s power OFF."" will appear on screen for about 4 seconds and theREC indicator will blink to continue pause mode.NOTE: The pause function will be released after 5minutes to prevent damage to the tape or theVCR. The VCR will change to the STOP mode.CH 110While the VCR is recording, press the TV/VCR selectorbutton to select the TV position.The TV/VCR indicator will go off and recording willcontinue.Select the TV channel you want to watch by using theTV channel selector.NOTE: Some CATV hookups do not permit viewing onechannel while recording another. See pages 12,13. RECORDING ONE PROGRAM WHILE WATCHING ANOTHERAfter recording, break off the erase prevention tab if youdo not wish to record over the tape.Cover the hole with adhesive tape.Be careful the tape does not extend past the edges ofthe cassette housing.Erase prevention tabAdhesive tape TO PREVENT AN ACCIDENTAL RECORDINGScrewdriverNOTE: Since the VCR has its own TV tuner, it is notactually necessary to have the TV turned on inorder to make a recording. Turning on the TVmerely allows confirmation of the proper channelsettings on your VCR.RECORDING A TV PROGRAM3Press the direct channel selection buttons or theCHANNEL ▲ or ▼ button to select the channel to berecorded.CH 110VHF/UHF/CATV CHANNELSTV CATVVHF2-13UHF14-69VHF2-13STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1)100-125 (100)(125) 01 (5A)1-9 Press 0 twice and then 1-9 as required.Example: To select 2, Press “002”.10-19 Press 0 first and then the remaining 2 digits inorder from left to right.Example: Press 012 for “12”.20-99 Press 2 digits in order.Example: Press 22 for“22”.100-125 Press the 3 digits inorder.Example: Press 110for “110”. TO RECORD AGAIN 4F11701A P14-19 10/16/01, 1:34 PM19
201Press the MENU button.Check the TIMER REC SEToption is selected, then pressthe ENTER button.2Press the TRACKING SET + or– button to select one of theprogram line, then press theENTER button.3Press the TRACKING SET +or – button to select the date,then press the ENTERbutton.4Set the start time, end time,channel and tape speed as instep 3.NOTE: To record from externalsource set the channelto "L1" or "L2". “L1(from AUDIO/VIDEO INjacks on the rear)” or“L2 (from AUDIO/VIDEO IN jacks on thefront)” will appear nextto CH 125 (or 69).5To enter other programs,repeat steps 2 through 4. Or,press the MENU button twiceto return to the normal screen.Timer recording can be programmed on-screen withthe remote control. The built-in timer allows automaticunattended recording of up to 8 programs within 1month.EXAMPLE: Program a timer recording for the 26th day,channel 125 (CATV), 11:00 - 11:30 PM on timerprogram number 1 (Tape speed: SLP).CHECK BEFORE YOU BEGIN•Turn on the TV and set to the video channel 3 or 4.•Press the TV/VCR selector button to select the VCRmode.•Load a video cassette with the erase prevention tabintact. The VCR will automatically turn on.•Check that the clock and date are correct (see page 15).When a TV is connected with an audio/video cable,turn the TV and this VCR on and select the video inputmode on the TV.To cancel timer recording, press the button again andthe T.REC indicator will go out.⟨+/–/ENTER/MENU⟩MENUCLOCK SETTIMER REC SETON OFFON OFFAUTO REPEATCH SET UPLANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND-:---:---:---:---:---:-- ----:-- -:-- ----:-- ----:-- -------:-- -:-- ----:-- -:-- ----:-- --------- ------- ------- -------- ------- ------- ------- - 26(SU)⟨+/–/ENTER/CANCEL/MENU⟩START ENDDATE CH-:--⟨+/–/ENTER/CANCEL/MENU⟩DATE START END CH––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –CH 125OTR 0 : 30NOTES: • Press the REC buttonto increase the timeneeded for recording(See the chart ).•To cancel OTR, pressthe STOP button orturn off the power.CH 125The One-touch Timer Recording feature providesa simple and convenient way to make a timedrecording.EXAMPLE: One-touch Timer Recording for 30 minutes.CHECK BEFORE YOU BEGIN•Turn ON the TV and set to the video channel 3 or 4.•Turn on the VCR POWER button.When a TV is connected with an audio/video cable, turnthe TV on and select the video input mode on the TV.1Load a cassette tape with theerase prevention tab intact.2Press the SP/SLP selectorbutton to select the desiredtape speed SP or SLP.The counter and SP or SLPwill appear on the screen forabout 4 seconds.3Press the direct channelselection buttons or theCHANNEL ▲ or ▼ button toselect the channel to berecorded.The channel number willappear on the screen for about4 seconds.4Press the REC button to beginrecording. Press the buttonagain to stop recording after30 minutes. Each additionalpress of the REC button willincrease recording time asshown in the chart below, up toa maximum of 5 hours. TheOTR and recording time willappear on screen for about 4seconds.00 : 00 : 00 SPONE-TOUCH TIMERRECORDING (OTR)SETTING THE TIMERRECORDINGPressoncetwice3 times4 times5 times6 times7 times8 times9 timesRecording timeNORMAL REC0:301:001:302:003:004:005:00NORMAL REC6Press the TIMER button. The power will go off, theT.REC indicator will light and the VCR stands by forrecording. 4F11701A P20-BACK 10/16/01, 1:33 PM20
21When setting the date in step 3, press the TRACKINGSET – button repeatedly.The setting changes as follows:ExamplePress the TRACKING SET + or– button to select the TIMERREC SET option in the MENU.Then press the ENTER button todisplay the timer program list.Press the MENU button twice toreturn to the normal screen. TO CONFIRM THE SETTINGS TO SET DAILY/WEEKLY TIMERPress the TRACKING SET + or –button to select the TIMER RECSET option in the MENU. Thenpress the TRACKING SET + or –button to select the unnecessaryprogram, and press the CANCELbutton to cancel the program. IF THE PROGRAM OVERLAPS ANOTHER TO CANCEL A PROGRAM8 : 00 11 : 009 : 00 10 : 00Program 1Prog.1Deleted PartsNon Recorded Portion PartsProg.2 Prog.3Program 2Program 3Recording Control SettingsNOTES: •The everyday/every week recording can bemade continuously until the recording iscanceled or the tape reaches the end.•During timer recording, the automaticrewinding mechanism does not function.Press the DISPLAY button.Press the DISPLAY button.Press the DISPLAY button again to make the display disappear.Press the DISPLAY button again to make the display disappear.Press the COUNTER RESET button. The counter willappear on the screen. TO SET THE COUNTER TO '00:00:00' WHILE OPERATING A TAPE WHILE WATCHING TVNOTES: • If you rewind the tape from "00:00:00", a minussign ("–") will be displayed in front of the time.•When you load a tape, the counter will changeto "00:00:00".•The counter does not function on nonrecorded(blank) sections of the tape. When you rewind,fast forward or play tapes through blank sections,the counter stops.00 : 00 : 00 SPCH 1258 : 30 AM THUDAY OF THE WEEKCHANNELTAPESPEEDREAL TIME COUNTERCLOCKNOTE: Do not overlap programs as portions of theconflicting programs will be lost. The firstrecording time has priority over the next recordingtime as shown in the diagram.⟨+/–/ENTER/CANCEL/MENU⟩26 (WE)11:00PM 11:30PM125SLPDATE START END CH––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –⟨+/–/ENTER/CANCEL/MENU⟩DATE START END CH––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –––––– –:–– –:–– –– –While setting, press the ENTER button to flash the itemto correct, then re-enter the setting with the TRACKINGSET + or – button.When finished, press the ENTER button.NOTES: •The VCR cannot be used while the T.RECindicator is lit.•After a power failure or disconnection of thepower plug, all programmed recordingsettings must be reset upon resumption ofpower. In this case, reset the clock (see page15) and reprogram any timer recordings.•Press the CANCEL button to move cursorbackward for correction. TO CORRECT THE SETTINGSThe current day (Friday) SU-SA (Sunday to Saturday)MO-SA (Monday to Saturday)MO-FR (Monday to Friday)WKL-WE WKL-TH (Weekly Thursday)(Weekly Wednesday)One month laterminus one dayON-SCREEN FUNCTIONDISPLAY00 : 00 : 00 SPCH 1258 : 30 AM THUOPERATING MODETAPE INAUTO REPEATSETTING THE TIMER RECORDING 4F11701A P20-BACK 10/16/01, 1:33 PM21
22NOTES: • It is recommended that you set the SPEED tothe SP mode on the recording VCR for bestresults.• Unauthorized recording of copyrightedtelevision programs, films, video tapes andother materials may infringe on the rights ofcopyright owners and violate copyright laws.For duplicating a previously recorded tape from acamcorder, follow the camcorder manufacturer’sinstructions. A typical camcorder dubbing hookup isshown above.If you connect the VCR to another VCR or camcorder,you can duplicate a previously recorded tape.Make all connections before turning on the power.3Press the REC/OTR button on the recording VCR,then press the PAUSE button.4Press the PLAY button on the playback VCR, thenpress the PAUSE/STILL button.5Press the PAUSE/STILL button on both the VCRssimultaneously to begin the duplicating process.DUPLICATING A VIDEO TAPELINE 21Load a blank cassette tape with the erase preventiontab intact into the recording VCR.Load a previously recorded tape into the playbackVCR or CAMCORDER.2Press the INPUT SELECTbutton to select AUDIO/VIDEOinput position. "LINE2" willappear on the screen.AUDIO/VIDEO Cord (not supplied)Playback VCRTo VIDEO OUT To AUDIO OUTRecording VCRTo VIDEO IN To AUDIO INAUDIO/VIDEO Cord (not supplied)To AUDIO INTo VIDEO INRecording VCRTo AV JackPlayback CamcorderNOTE: You can also use the rear AUDIO/VIDEO INjacks. Select “ LINE1 ” by pressing the INPUTSELECT button. 4F11701A P20-BACK 10/16/01, 1:33 PM22
23The video heads are the means by which the VCRreads pictures from the tape during playback. In theunlikely event that the heads become dirty enough to beclogged, no picture will be played back. This can easilybe determined if, during playback of a known good tape,there is good sound, but no picture (picture is extremelysnowy). If the heads require use a high quality headcleaning system or have them cleaned professionally.NOTES: •Video heads may eventually wear out andshould be replaced when they fail to produceclear pictures.•To help prevent video head clogging, useonly good quality VHS tapes. Discard wornout tapes.VIDEO HEAD CLOGGING VIDEO HEAD CLEANINGVideo head cleaning is needed when the playbackpicture becomes unclear. This signifies that the headsare getting dirty and can occur when playing poor qualityor damaged tapes. If the heads require cleaning use ahigh quality head cleaning system or have them cleanedprofessionally. If playing a head cleaning tape in theVCR once does not improve the picture, play it severaltimes before requesting service.DO NOT ATTEMPT TO CLEAN THE VIDEO HEADSOR SERVICE THE UNIT BY REMOVING THE TOPCOVER.VIDEO HEAD CLEANING 4F11701A P20-BACK 10/16/01, 1:33 PM23
24No picture on screen whenplaying back a recorded tape.Noise bars on screen.The TV is not set to the video channel3 or 4.Tracking adjustment beyond range ofautomatic tracking circuit.Video heads are dirty.The tape is worn or damaged.Set to the video channel 3 or 4 oradjust the fine tuning button on yourTV set.152122–BEFORE REQUESTING SERVICEMake sure by first checking the following points.No power.TV BROADCAST RECEPTIONAlthough the power is on, itdoes not operate.A TV program that is selectedby the VCR does not appear onthe screen.A TV program selected by theVCR does not appear in color.RECORDINGTV recording does not work.Timer recording does not work.Antenna connection is not correct.Antenna cable is disconnected.The video channel is not in thecorrect position.The TV is not set to the videochannel 3 or 4.The TV/VCR selector is set at TV mode(The TV/VCR indicator is not lit).INPUT SELECT is set to the LINEmode.The TV/CATV menu option setting.The erase prevention tab of the videocassette is broken off.INPUT SELECT is set to the LINEmode.The time is not set correctly.The recording start/end time is not setcorrectly.The TIMER button has not beenpressed (The T.REC indicator is not lit).SYMPTOM CAUSE POSSIBLE SOLUTION PAGEThe AC power cord is not connected.Cassette is not inserted.Connect the AC power cord to theAC outlet.Insert a video cassette.Connect it correctly.Reconnect the antenna cable.Set it to CH 3 or 4.Set the TV channel selector to the 3or 4 position.Press the TV/VCR selector button(The TV/VCR indicator will light).Press the INPUT SELECT button toselect the TV mode.Set the TV/CATV menu option toselect TV or CATV mode.Place a piece of vinyl tape over thegap.Press the INPUT SELECT button toselect the TV mode.Reset the present time.Set the start/end time.Press the TIMER button (The T.RECindicator will light).517101015151522221922152020POWERAdjust tracking manually using theDIGITAL TRACKING button or theTRACKING SET + or – buttons onremote control.Have the video heads cleaned.Try another tape.PLAYBACK 4F11701A P20-BACK 10/16/01, 1:33 PM24
25Remote control does not work.It is not aimed at the remote sensor.Distance too far or too much light inthe room.There is an obstacle in the path ofthe beam.The batteries are weak.The +, – polarity of the batteries arenot inserted correctly.The TV/VCR function is in the VCRmode.Aim it at the remote sensor.Operate within 15 feet (5 meters)reduce the light in the room.Clear the path of the beam.Replace the batteries.Insert correctly.Set to TV, or turn off the VCR powerbutton.666TV programs cannot be seenusing the TV selector.66–SYMPTOM CAUSE POSSIBLE SOLUTION PAGEREMOTE CONTROLVideo Head:Audio Track:Power Source:Power Consumption:Tuner:RF Channel Output:Inputs/Outputs:Video:Audio:Antenna:4 Rotary HeadsMONO Sound - 1 Track120V, 60HzApprox. 8 watts181 Channel Freq. SynthesizedVHF 2-13UHF 14-69CATV 14-36 (A)-(W)37-59 (AA)-(WW)60-85 (AAA)-(ZZZ)86-94 (86)-(94)95-99 (A-5)-(A-1)100-125 (100)-(125)01 (5A)Channel 3 or 4, SwitchableIn (RCA) 1Vp-p/75 ohmOut (RCA) 1Vp-p/75 ohmIn (RCA)–8dB/50K ohmOut (RCA)–8dB/1K ohmUHF/VHF IN 75 ohm coaxialUHF/VHF OUT 75 ohm coaxialF.FWD/REW Time:Speed Search:Dimensions:Weight:Remote Control:Supplied accessories:F. FWD: Approx. 4minutes and50 secondsREW: Approx. 2minutes and 30seconds(with T-120 Cassette Tape)SP - 3 & 5 X Normal SpeedLP - 7 & 9 X Normal SpeedSLP - 9 & 15 X Normal SpeedWidth: 14-3/16 inches (360mm)Height: 3-7/8 inches (95mm)Depth: 9 inches (229mm)7.1 IbsInfrared, Direct Access,2 x AAA batteriesRemote ControlBatteries (2 X AAA)75 ohm Coaxial CableSPECIFICATIONSSpecifications are subject to change without notice.Tape Speed shown is approximate. 4F11701A P20-BACK 10/16/01, 1:33 PM25
26Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limitedwarranties. These limited warranties extend to the original consumer purchaser or any person receiving this VCR asa gift from the original consumer purchaser and to no other purchaser or transferee .Limited Ninety (90) Day WarrantyTACP and THI warrant this product and its parts against defects in materials or workmanship for a period of ninety(90) days after the date of original retail purchase. During this period, TACP and THI will repair a defective product orpart, without charge to you. You must deliver the entire VCR to an Authorized TACP/THI Service Station. You pay forall transportation and insurance charges for the VCR to and from the Service Station.Limited One (1) Year WarrantyTACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of oneyear after the date of original retail purchase. During this period TACP/THI will replace a defective part withoutcharge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchaseyou pay labor charges involved in the replacement. You must also deliver the entire product to a TACP/THI Autho-rized Service Station. You are responsible for all transportation for the VCR to and from the Service Station.Rental UnitsThe warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm,whichever comes first.Commercial UnitsProducts sold and used for commercial use have a limited ninety (90) day warranty for all parts and rabor.Owner's Manual and Demographic CardYou should read this owner's manual thoroughly before operating this product. You should complete and mail theenclosed Demographic card within ten days after you, or the person who has given you this product as a gift,purchased this product. This is one way to enable TACP/THI to provide you with better customer service andimproved products. Failure to return the Demographic card will not affect your rights under this warranty.Your ResponsibilityThe above warranties are subject to the following conditions:( 1 ) You must retain your bill of sale or provide other proof of purchase.( 2 ) You must notify an Authorized TACP/THI Service Station within thirty (30) days after you discover a defectiveproduct or part.( 3 ) All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.( 4 ) These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.( 5 ) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair ofantenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systemsare your responsibility.( 6 ) Warranties extend only to defects in materials or workmanship as limited above and do not extend to anyproduct or parts which have been lost or discarded by you or to damage to products or parts caused bymisuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, improperinstallation, improper maintenance or use in violation of instructions furnished by us; or to units which havebeen altered or modified without authorization of TACP/THI.( 7 ) At you option, after the warranty period has expired in the U.S.A. Call (800)-631-3811 to receive informationconcerning an exchange price. Payment must be enclosed with the product in the form of a certified check ormoney order and forward your product to:Toshiba America Consumer Products Inc.Returns Center1420C Toshiba Dr.Lebanon, TN 37087.( 8 ) Upon receipt we will, at our option, replace your unit with a new or refurbished unit of equal value. Featuresmay not be identical to your original product.( 9 ) Physically damaged units are not acceptable for repair or exchange in or out of warranty and will be returnedas received.LIMITED WARRANTY TOSHIBA VIDEO CASSETTE RECORDER 4F11701A P20-BACK 10/16/01, 1:33 PM26
27All warranties implied by state law, including the implied warranties of merchantability and fitness for a particularpurpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of anywarranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties,guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement ofany parts. In no event shall TACP or THI be liable for consequential or incidental damages. No person, agent,distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any mannerwhatsoever. The time within which action must be commenced to enforce any obligation of TACP or THI arisingunder this warranty or under any statute, or law of the United States or any state thereof, is here by limited to 90days from the date you discover or should have discovered, the defect. This limitation does not apply to impliedwarranties arising under state law. This warranty gives you specific legal rights and you may also have other rightswhich may vary from state to state. Some states do not allow limitation on how long an implied warranty lasts, whenan action may be brought, or the exclusion or limitation of incidental or consequential damages, so the aboveprovisions may not apply to you.ATTENTION CANADIAN CONSUMERS:Canadian consumers are requested to complete the special Canadian "Warranty Registration Form" enclosed, andforward this completed form with a copy of bill of sale to TOSHIBA OF CANADA to "Register and Validate" theirwarranty. Products must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. andused in Canada are not covered by these warranties. Products purchased in Canada and used in the U.S.A. are notcovered by these warranties.How to Obtain Warranty ServiceIf after following all of the operating instructions in this manual and checking the section "BEFORE REQUESTINGSERVICE" and you still find that service is needed;( 1 ) In the U.S.A. call the TACP toll free number 1-800-631-3811 after you find a defective product or part tofind the nearest Toshiba Authorized Service Station.( 2 ) Arrange for the delivery of the product to the Authorized TACP/THI Service Station. Products shipped tothe Authorized Service Station must be insured and safely and securely packed, preferably in the originalcarton, and a letter explaining the problem must be enclosed. You are responsible for all transportationand insurance charges to and from the Authorized Service Station.In Hawaii ContactToshiba Hawaii,327 Kamakee Street,Honolulu, HI 96814(808) 591-8377Toll Free1-800-631-3811In the Continental United States call: 4F11701A P20-BACK 10/16/01, 1:33 PM27
284F11701A U01/11 Printed in Thailand 4F11701A P20-BACK 10/16/01, 1:33 PM28

Navigation menu