ORION ELECTRIC M4F2C VCR User Manual 4F11701A COV 07
ORION ELECTRIC CO., LTD. VCR 4F11701A COV 07
Manual
1
4 HEAD
VIDEO CASSETTE RECORDER
OWNER'S MANUAL
Before operating the unit, please read this manual thoroughly.
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the
remote manufacturer for the required programming code.
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable
Television) mode.
If not using CATV (Cable TV), set this menu option to the "TV" mode.
4F11701A COV-07 10/16/01, 1:35 PM1
W525
2
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION:
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
2
1. READ INSTRUCTIONS
All the safety and operating instructions should be
read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6. ATTACHMENTS
The manufacturer of this unit does not make any
recommendations for attachments, as they may cause
hazards.
IMPORTANT SAFEGUARDS
PORTABLE CART WARNING
(symbol provided by RETAC)
S3125A
- Reorient or relocate the receiving antenna.
-
Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techni-
cian for help.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance with
the FCC (Federal Communications Commission) Rules
could void the user's authority to operate this equipment.
COPYRIGHT:
It is permissible to record television
programs, films, video tapes and other material only in
the event that third party copyrights and other rights are
not violated.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a
bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool.
8. ACCESSORIES
Do not place this unit on an unstable cart, stand,
tripod, bracket, or table. The unit may fall, causing
serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combina-
tion to overturn.
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
4F11701A COV-07 10/16/01, 1:35 PM2
33
9. VENTILATION
Slots and openings in the cabinet back or bottom
are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating.
These openings must not be blocked or covered.
The openings should never be blocked by placing
the unit on a bed, sofa, rug, or other similar surface.
This unit should never be placed near or over a
radiator or heat source. This unit should not be
placed in built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of
power source indicated on the rating plate. If you are
not sure of the type of power supply to your home,
consult your appliance dealer or local power com-
pany. For units intended to operate from battery
power, or other sources, refer to the respective
pages on this Owner's Manual for their operating
instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-
current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Instead of
the polarized alternating-current line plug, your unit
may be equipped with a 3-wire grounding-type plug
(a plug having a third (grounding) pin). This plug will
only fit into a grounding-type power outlet. This too,
is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-
type plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when
it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent
damage to the unit due to lightning and power line
surges.
14. POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or
against such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as
this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit
as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock.
Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected
to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage
surges and built-up static charges. Section 810 of
the National Electrical Code (NEC) ANSI/NFPA 70,
provides information with respect to proper grounding
of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
IMPORTANT SAFEGUARDS
4F11701A COV-07 10/16/01, 1:35 PM3
4
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following
the operating instructions. Adjust only those
controls that are covered by the operating
instructions, as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has
been damaged.
f. When the unit exhibits a distinct change in
performance, this indicates a need for service.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician uses replacement parts specified
by the manufacturer or those that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this
unit, ask the service technician to perform safety
checks to determine that the unit is in proper
operating condition.
21. HEAT
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
22. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
IMPORTANT SAFEGUARDS
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD IN WIRE
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC-NATIONAL ELECTRICAL CODE
S2898A
4F11701A COV-07 10/16/01, 1:35 PM4
5
MOISTURE CONDENSATION
DO NOT OPERATE THIS VCR FOR AT LEAST THREE
HOURS WHEN MOISTURE IN THE AIR CONDENSES
ON THE VCR.
WHAT IS MOISTURE CONDENSATION?
When a cold liquid is poured into a glass, for example,
water vapor in the air will condense on the surface of the
glass. This is called moisture condensation.
MOISTURE WILL CONDENSE ON THE UNIT IN THE
FOLLOWING CASES;
•When you move this VCR from a cold to a warm place.
•After heating a cold room or under extremely humid
conditions.
WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,
Plug the power cord into an AC outlet, press the POWER
button to turn on and leave the unit at room temperature
until moisture condensation disappears.
Depending on the surrounding conditions, this may take
two or three hours.
POWER SOURCE
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard 120V 60Hz
polarized AC outlet.
NOTES:
1. Never connect the AC line cord plug to other than the
specified voltage (120V 60Hz). Use the attached
power cord only.
2. If the polarized AC cord does not fit into a non-polarized
AC outlet, do not attempt to file or cut the blade. It is the
user’s responsibility to have an electrician replace the
obsolete outlet.
PRECAUTIONS
•If you cause a static discharge when touching the VCR,
and the VCR fails to function, simply unplug the unit
from the wall outlet, wait 10 minutes and plug it back
in. The VCR should return to normal operation.
•Avoid extreme heat or cold. (41˚F/5˚C-104˚F/40˚C)
•Do not place the VCR on or near appliances which
may cause electromagnetic interference, e.g. TV,
speakers, etc. Doing so may cause erratic operation
of the VCR including picture and/or sound distortion or
noise.
•Avoid extreme moisture and dust.
•The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid covering
the holes with soft materials such as cloth or paper.
•Do not insert fingers or any other objects into the
cassette loading slot. Do not spray cleaner or wax
directly on the VCR or use forced air to remove dust.
•Avoid places subject to strong vibration. Use in a
horizontal (flat) position only.
•Keep the VCR away from flower vases, sinks, etc.
If liquids should be spilled into the VCR, serious
damage will result. If you spill any liquids into the
VCR, unplug the AC power cord immediately and
consult qualified service personnel before attempting
to use the VCR again.
•When you finish operating the VCR, always unload
the cassette and turn off the power.
•When you leave your home for a long time, unplug the
AC power cord.
•To protect the VCR from a lightning storm, unplug the
AC power cord from the wall outlet and disconnect the
antenna.
Polarized AC Cord Plug
(One blade is wider than the other)
AC Outlet
Wider Hole
and Blade
4F11701A COV-07 10/16/01, 1:35 PM5
6
High Quality Picture Technology - This video cassette
recorder marked "HQ" incorporates VHS high quality
technology. A built-in detail enhancer is used to boost
the recorded signal and provide maximum picture
quality in playback. It is compatible with other VHS video
cassette recorders.
4 Video Heads - Provides optimal picture quality for
special effects playback.
8-Program/1-Month Programmable Timer with
Everyday/Every Week Capability - The built-in timer
allows automatic absentee recording of up to 8 TV
programs within 1month. It is also possible to record a
program which is broadcast at the same time everyday
or every week.
On-Screen Display and Programming - When you
select a channel or make other changes, the TV will
show an indicator on the screen for a few seconds.
Clock settings, timer setting and other set-up operations
can be carried out using the on-screen display menu
system.
Digital Auto Tracking - Automatically adjusts tracking
during playback for the best possible picture.
181 Channel Tuner - Receives standard VHF and UHF
broadcast channels and up to 113 cable channels.
One-touch Timer Recording (OTR) - Simply by
pressing the REC button, the VCR can be programmed
for up to 5 hours of recording with an immediate start.
Automatic Power On - When loading a cassette tape,
this VCR will automatically turn on.
Automatic Playback - When loading a cassette tape with-
out the erase prevention tab, this VCR will automatically
turn on and play back the cassette tape at the correct
speed.
Automatic Rewind-Stop-Eject-Power Off - When a
tape reaches its end during playback and recording, it
will automatically stop, rewind, stop, eject the tape and
the VCR will turn off.
•Open the battery
compartment cover.
•Install two "AAA"
batteries.
•Replace the cover.
BATTERY INSTALLATION
BATTERY CAUTIONS
Follow these precautions when using batteries in this
device:
•Use only the size and type of batteries specified.
•Be sure to follow the correct polarity when installing
the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
•Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
•If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
•Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture (Follow
battery manufacturer's directions).
EFFECTIVE DISTANCE OF THE
REMOTE CONTROL
NOTES: •When direct sunlight, an incandescent lamp,
fluorescent lamp or any other strong light
shines on the Remote Sensor, the remote
operation may be unstable.
•When there is an obstacle between the VCR
and the remote control, the remote control
may not operate.
30˚30˚
15 FEET
PRECAUTIONS FEATURES
4F11701A COV-07 10/16/01, 1:35 PM6
7
Automatic Repeat Play System - When the AUTO
REPEAT option is turned on, this VCR will automatically
play back the same cassette tape repeatedly.
On-Screen 3 Language Display - This TV can display
the on screen language in English, Spanish or French.
Slow Motion - This VCR provides slow motion which of-
fers steady, noise free playback at 1/10 normal speed.
Frame by Frame Advance - Press the SLOW button
during still playback to advance the tape one frame at
a time.
Real Time Tape Counter - The counter displays on the
screen the elapsed time in hours, minutes and seconds
and can be used to locate programs.
2 Speed Picture Search - 3 or 5 times normal speed in
SP mode (7X or 9X in LP and 9X or 15X in SLP).
3 Speed Playback - Plays three tape speeds (SP, LP,
SLP).
2 Speed Record - Records two tape speeds (SP, SLP).
Front Audio/Video In Jacks - A VCR or other video
device may be hooked up for dubbing.
CAUTIONS
FEATURES ................................................................ 6
LOCATION OF CONTROLS ...................................... 8
BASIC CONNECTIONS ........................................... 10
CATV (CABLE TV) CONNECTIONS ....................... 12
AUDIO/VIDEO CONNECTIONS .............................. 14
SETTING THE VIDEO CHANNEL ........................... 15
LANGUAGE SELECTION ........................................ 15
SETTING THE CLOCK ............................................ 15
SETTING THE CHANNELS ..................................... 16
NOISE ELIMINATION .............................................. 16
PLAYBACK
RECORDING
RECORDING A TV PROGRAM............................... 18
ONE-TOUCH TIMER RECORDING (OTR) ............. 20
SETTING THE TIMER RECORDING ...................... 20
LOADING AND UNLOADING .................................. 17
PLAYBACK .............................................................. 17
SPECIAL PLAYBACK .............................................. 18
ON-SCREEN FUNCTION DISPLAY ........................ 21
DUPLICATING A VIDEO TAPE ............................... 22
VIDEO HEAD CLEANING ........................................ 23
BEFORE REQUESTING SERVICE ......................... 24
SPECIFICATIONS ................................................... 25
WARRANTY............................................................. 26
ADDITIONAL INFORMATION
IMPORTANT SAFEGUARDS .................................... 2
PRECAUTIONS ......................................................... 5
PREPARATION
TABLE OF CONTENTS
4F11701A COV-07 10/16/01, 1:35 PM7
8
TV/VCR SP/SLP
SLOW
MENU
REW
REC
PAUSE/STILL
CHANNEL
FF
SET
ENTER
STOP
PLAY
123
456
7
0
89
–
TRACKING
+
DISPLAY
CANCEL
COUNTER
RESET
DIGITAL
TRACKING
TIMER
INPUT
SELECT
POWER
VIDEO
LINE 2 IN
AUDIO
TV/VCR
T.REC REC POWER
REC CHANNEL
POWER
PLAY
STOP
/
EJECT
REW FF
FRONT
LOCATION OF CONTROLS
REMOTE CONTROL
1
13 12 11 10 914 57
423
7
29
27
26
25
24
23
1. Cassette Loading Slot - To insert or remove a
video tape.
2. REW button - In the STOP mode, this button
rapidly winds the tape backwards. In the PLAY
mode, this button activates Reverse Search.
3. PLAY button - Press to play a prerecorded tape.
4. FF button - In the STOP mode, this button rapidly
winds the tape forward. In the PLAY mode, this
button activates Forward Search.
5. POWER button - Turns the VCR power on and off.
6. STOP/EJECT button - Press once to stop the tape
in any mode. Press again to eject the tape.
7. CHANNEL ▼ / ▲ buttons - Used to select a
channel for viewing or recording.
8. REC button - Press once to start normal recording.
Additional presses activate One-touch Timer
Recording.
9. Remote Sensor - Signals from the Remote Control
are received here.
10. POWER indicator - Lights up when the power is
turned on.
11. REC indicator - Lights up during recording.
12. T. REC indicator - Lights when the unit is in the
Timer Record mode.
13. TV/VCR indicator - Lights up when the TV/VCR
selector button is selected to the VCR mode.
14. AUDIO/VIDEO IN (LINE 2) Jacks - Audio and
video signal cables from an external source can be
connected here.
4
28
5
15
8
3
2
16
17
18
20
21
19
8 6
22
4F11701A P08-13 10/16/01, 1:34 PM8
9
UHF/VHF
OUT(TV)
IN(ANT)
AUDIO
REAR
15. Direct Channel Selection buttons (0-9) - Allows
direct access to any channel.
16. STOP button - Press to stop the tape.
17. MENU button - Press to display the on-screen menu
function.
18. TRACKING SET + / – buttons - During playback, they
are used to adjust tracking manually. Used to set or
adjust in the menu mode.
19. TIMER button - Used to set the VCR to start record-
ing at a preset time.
20. SLOW button - Press to play back a tape in slow mo-
tion or to advance the tape one frame at a time during
still playback.
21. COUNTER RESET button - Resets the Real Time
Tape Counter to 00:00:00.
22. TV/VCR selector button - Switches between TV
and VCR.
23. PAUSE/STILL button - During recording, this
button temporarily stops the tape. The "
" will
appear on the screen. During playback, it stops the
tape and displays a still image on the TV screen.
24. ENTER button - Used to enter the information in the
menu mode.
25. DIGITAL TRACKING button - Allows automatic
adjustment of tracking to minimize picture noise
during playback.
26. CANCEL button - Used to clear the selected timer
recording program.
27. INPUT SELECT button - Switches the program for
viewing between the VCR and external input
sources.
28. DISPLAY button - Displays the present time/day of
the week, channel, counter, speed selection and VCR
mode on the TV screen.
29. SP/SLP selector button - Sets the tape speed for
recording.
30. AUDIO VIDEO OUT Jacks - Use to output audio and
video signal to a TV, amplifier or VCR.
31. UHF/VHF IN (ANT) Jack - Connect a UHF/VHF
antenna or CATV cable to this jack.
32. UHF/VHF OUT (TV) Jack - Use to output UHF/VHF
or CATV signal to a TV.
33. AUDIO/VIDEO IN (LINE1) Jacks - Audio and video
signal cables from an external source can be con-
nected here.
34. AC Power Cord - Connect to a 120V 60Hz outlet.
34
30 31
33 32
4F11701A P08-13 10/16/01, 1:34 PM9
VIDEO
OUT LINE1
10
OUT
IN
OUT
IN
OUT
IN
NOTES: •A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to the
VCR properly.
•For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an
outdoor type antenna is required.
•If you are not sure about the connection, please refer to qualified service personnel.
If you are using an antenna system, follow the instructions. If you are a cable (CATV) subscriber,
skip ahead to
page 12 for the proper connections.
ANTENNA TO VCR CONNECTION
The VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect
it to the VCR. Then connect the VCR to the TV. Below are 3 common methods of connecting an antenna system to a
VCR. Find the type of antenna system you are using and follow the connection diagram.
If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm
inputs and one 75 ohm output.
NOTE:
BASIC CONNECTIONS
Combination VHF/UHF Antenna with 75 ohm Coaxial Cable
Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire
Separate VHF and UHF Antennas
1
2
3
VCR
VCR
VCR
VHF UHF
300 ohm Twin Lead (Flat) Wire
Matching Transformer
300 ohm Input
75 ohm output
(not supplied)
300 ohm Twin Lead (Flat) Wire
75 ohm Coaxial Cable
75 ohm Coaxial Cable
Combiner
75/300 ohm Inputs
75 ohm output
(not supplied)
4F11701A P08-13 10/16/01, 1:34 PM10
11
UHF
VHF
O
UT
IN
UHF
VHF
O
UT
IN
O
UT
IN
VHF/UHF IN
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
75 ohm Coaxial Cable (supplied)
Splitter
75 ohm Input
75/300 ohm outputs
(not supplied)
Splitter
75 ohm Input
300 ohm outputs
(not supplied)
TV with single 75 ohm
VHF/UHF antenna input
TV with 300 ohm UHF
and 75 ohm VHF
antenna inputs
TV with 300 ohm UHF
and 300 ohm VHF
antenna inputs
VCR TO TV CONNECTION
After you have connected the antenna to the VCR, you must connect the VCR to the TV.
Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs
(numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception.
TV
TV
TV
75 ohm Coaxial Cable
(supplied)
75 ohm Coaxial Cable
(supplied)
4F11701A P08-13 10/16/01, 1:34 PM11
12
VHF/UHF
IN (ANT)
OUT
IN
Many cable companies offer services permitting reception of extra channels including pay or subscription channels.
This VCR has an extended tuning range and can be tuned to most cable channels without using a cable company
supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special
channel which is scrambled, you must have a descrambler box for proper reception.
CATV (CABLE TV) CONNECTIONS
NOTE: Whenever a Converter/Descrambler box is placed before the VCR, you must tune the VCR to the output of
the Converter/Descrambler box, usually channel 3 or 4.
ALLOWS: *Recording of nonscrambled channels.
*Use of the programmable timer.
*Recording of one channel while watching another.
ALLOWS: *Recording of channels through the converter box
(scrambled and unscrambled).
*Using the programmable timer to record only the
channel selected at the converter box.
PREVENTS: *Recording one channel while watching another.
*Using the VCR tuner to select channels.
1
2
VCR
Incoming Cable
TV
VHF/UHF
IN (ANT)
OUT
IN
VCR
Converter/
Descrambler
Incoming
Cable
TV
VHF/UHF
IN (ANT)
OUT
IN
VCR
Incoming Cable Converter/Descrambler
TV
3
ALLOWS: *Recording of nonscrambled channels.
*Use of the programmable timer.
*Recording an unscrambled channel while watching
any channel selected at the converter box.
PREVENTS: Recording scrambled channels.
To record from converter/descrambler, VCR
tuner must be tuned to the converter output
channel, usually channel 3 or 4.
If you are playing a tape or using the tuner
built into the VCR, the converter must be set
to the video channel output of the VCR
(either 3 or 4).
NOTE:
NOTE:
4F11701A P08-13 10/16/01, 1:34 PM12
13
This VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled
programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult
your local cable company for more information concerning connection to their descrambler equipment. There are
many ways to connect your VCR to a cable system. Below are six common methods of connection.
IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.
Incoming
Cable
4
5
6
ALLOWS: *Recording of one channel while watching another.
*Using the programmable timer to record only the channel selected at the converter box.
*Recording of all channels through the converter box.
PREVENTS: *Watching scrambled channels while recording another channel.
*Using the VCR tuner to select channels.
VHF/UHF
IN (ANT)
A
B
OUT
IN
VCR
Splitter
Converter/Descrambler
TV
VHF/UHF
IN (ANT)
A
B
OUT
IN
VCR
Converter/
Descrambler
A/B Switch
TV
Incoming
Cable
Splitter
ALLOWS: *Recording of nonscrambled channels.
*Recording of one channel while watching another.
*Watching premium channels through the converter while recording nonscrambled channels.
*Using the programmable timer.
PREVENTS: Recording scrambled channels.
ALLOWS: *Recording of all channels through the converter box.
*Recording a scrambled or unscrambled channel while watching another (scrambled or
unscrambled) channel.
*Using the programmable timer to record only the channel selected at the converter box.
PREVENTS: Using the VCR tuner to select channels.
VHF/UHF
IN (ANT)
A
B
OUT
IN
VCR
A/B Switch
Splitter
TV
Incoming
Cable
Converter/
Descrambler
Converter/
Descrambler
A/B Switch
4F11701A P08-13 10/16/01, 1:34 PM13
14
OUT
IN
OUT
IN
When you connect your VCR to a Stereo Component System, you can view the picture from the VCR while
enjoying powerful sound from your audio system.
NOTE: Sound will be monaural.
If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher quality
picture and sound. If you have a stereo, you can connect a stereo amplifier to enjoy powerful sound.
To AUX (R) IN
To AUX (L) IN
To AUDIO OUT
To VIDEO OUT
To VIDEO IN
To ANT IN
To UHF/
VHF OUT
TV
AUDIO Cord (not supplied)
AUDIO/VIDEO CONNECTIONS
AUDIO/VIDEO CONNECTION
1. Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV.
2. Connect the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on the TV.
3. Set the VIDEO/TV selector of your TV to "VIDEO".
STEREO AMPLIFIER CONNECTIONS
Connect the AUDIO OUT jacks on the VCR to the AUX IN jacks on the stereo amplifier.
VCR To UHF/VHF IN
From ANTENNA/CATV system
VIDEO Cord
(not supplied)
To AUDIO OUT
AUDIO/VIDEO Cord (not supplied)
To VIDEO IN To AUDIO IN
To ANT IN
To UHF/VHF OUT
TV
VCR To UHF/VHF IN
From ANTENNA/CATV system
4F11701A P14-19 10/16/01, 1:34 PM14
To VIDEO OUT
15
SETTING THE VIDEO
CHANNEL
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot
be tuned on your TV, proceed as follows: set the VCR 3/
4 channel selector and the TV to CH 3 or 4, play back a
prerecorded tape and tune the TV to receive a sharp
color picture from the video cassette recorder. Refer to
your TV owner's manual for details.
To view playback of a recorded tape, or to watch a
program selected by the VCR's channel selector, the
TV must be set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable
only.
1During power off, press and hold the “3” or “4”
number button on the remote control for 3 seconds.
The “TV/VCR” indicator will flash 4 times.
2Turn ON the VCR POWER button.
3Turn ON the TV and set to CH 3 or 4 to correspond
with the channel selected in step 1.
4Press the TV/VCR selector button to select the VCR
position.
The TV/VCR indicator will light.
5Select any channel to receive
a TV station in your area.
The channel number will
appear on the screen for about
4 seconds.
CH 125
4
This VCR can display on the TV screen in the
English, Spanish or French languages.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
2Press the TRACKING SET +
or – button to select the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
3Press the MENU button until the menu screen is
cleared.
〈
+/–/ENTER/MENU
〉
LANGUAGE/IDIOMA/LANGUE
ENGLISH
FRANCAIS
ESPAÑOL
1Press the MENU button.
Press the TRACKING SET +
or – button to select the
LANGUAGE option, then
press the ENTER button.
SETTING THE CLOCK
1
MONTH
DAY
TIME
YEAR
3
1
12
(THU)
: 00 AM
2000
+/–/ENTER/CANCEL/MENU
〈
+/–/ENTER/CANCEL/MENU
〉
MONTH
DAY
TIME
YEAR
3
29
8
(FRI)
: 30 AM
2002
2
NOTES: • After a power failure or disconnection of the
power, the timer settings will be lost. In this
case, reset the present time.
•Press the CANCEL button to move cursor
backward for correction.
•If you want to correct time or date while the
clock is functioning, press the MENU button,
then press TRACKING SET + or – button to
select the CLOCK SET option, then press the
ENTER button.
To make any adjustments perform steps 2
through 3.
1Press the MENU button. Press
the TRACKING SET + or –
button to select the CLOCK SET
option, then press the ENTER
button.
2Press the TRACKING SET + or
– button to set the month, then
press the ENTER button.
3Set the day, year and time as in
Step 2.
•The day of the week will
automatically appear when
you set the year.
•Press and hold down the
button to increase/ decrease
the minute by 10.
•Auto date and time start
functioning when you finish
setting.
You must set the date and time manually for timer
recordings.
EXAMPLE: Setting the clock to "8:30 AM" March, 29
(FRI), 2002.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input
mode on the TV.
LANGUAGE SELECTION
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
4F11701A P14-19 10/16/01, 1:34 PM15
16
AUTOMATIC MEMORY TUNING
〈
+/–/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
TO ADD/DELETE CHANNELS
1Press the MENU button.
Press the TRACKING SET +
or – button to select the CH
SET UP option, then press the
ENTER button.
2Press the TRACKING SET + or
– button to select the ADD/DE-
LETE mode, then press the
ENTER button.
3Select the desired channels to
be added or deleted using the
TRACKING SET + or – button.
4Press the ENTER button if you
wish to DELETE the channel
from memory.
Press the ENTER button if
you wish to ADD the
unmemorized channel.
Repeat Steps 3 and 4 for each channel to be added
or deleted.
5 Press the MENU button three times after adding or
deleting all of the desired channels, to return to
normal TV viewing.
When you don't want to receive a weak signal
broadcast, the Blue back screen can be obtained by
selecting the NO NOISE BACKGROUND "ON". When
the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON" position.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
〈
+/–/ENTER/MENU
〉
ADD CH 002
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input mode
on the TV.
〈
+/–/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
1Press the MENU button.
Press the TRACKING SET +
or – button to select the CH
SET UP option, then press
the ENTER button.
2Press the TRACKING SET +
or – button to select the
AUTO CH MEMORY mode,
then press the ENTER button.
3The auto tuning will start. The
channel display will count up
and when finished, the screen
returns to normal.
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
SETTING THE CHANNELS
1Press the MENU button.
2Press the TRACKING SET +
or – button to select the CH
SET UP option, then press the
ENTER button.
3Press the TRACKING SET +
or – button to select the TV/
CATV mode.
4Press the ENTER button to
select the TV or CATV mode.
The arrow indicates the
selected mode.
5Press the MENU button twice to return to normal TV
viewing.
TV/CATV SELECTION
〈
+/–/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 001
This VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the VCR’s memory. In addition to
normal VHF and UHF channels, this VCR can receive
up to 113 Cable TV channels. To use this VCR with an
antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in
the CATV mode.
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
NOISE ELIMINATION
1Press the MENU button, then
press the TRACKING SET + or
– button to select the NO
NOISE BACKGROUND option.
2Press the ENTER button to
select the ON position.
3Press the MENU button again.
TV - VHF/UHF channels
CATV - CABLE TV channels
4F11701A P14-19 10/16/01, 1:34 PM16
17
TO REWIND OR FORWARD THE TAPE
RAPIDLY
Press the REW button in the
STOP mode.
"" will appear on the screen for
about 4 seconds.
Press the FF button in the STOP
mode.
"" will appear on the screen for
about 4 seconds.
When a tape is played, the Digital Auto Tracking System
automatically adjusts the tracking to obtain the best
possible picture. If noise bars appear during playback,
adjust the tracking manually:
•Press the TRACKING SET + or – button to obtain the
best possible picture. To resume automatic tracking,
press the DIGITAL TRACKING button.
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape program during REW or FF
mode, press and hold the REW or FF button again. The
backward or forward visual search picture will be seen
on the screen. Release the button to return to the REW
or FF mode.
DIGITAL TRACKING CONTROL
TO START PLAYBACK
TO STOP PLAYBACK
CHECK BEFORE YOU BEGIN
Turn ON the TV and set to the video channel 3 or 4.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
1Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
2Press the PLAY button.
Playback will start.
"" will appear on the screen
for about 4 seconds.
Press the STOP button once.
The tape will stop but remain fully
loaded and ready to play.
" " will appear on the screen for
about 4 seconds.
LOADING
UNLOADING
Use only video cassette tapes marked .
Push the center of the tape until it
is automatically retracted.
AUTOMATIC POWER ON
The VCR will turn on automatically
and the POWER indicator will light.
AUTOMATIC PLAY
When loading a cassette tape without the erase preven-
tion tab, playback will start immediately.
Insert the cassette with its labeled side facing you. An
inverted cassette cannot be inserted.
To unload a cassette, press the
STOP/EJECT button on the VCR
twice. The first press will stop the
tape in any mode. The second
press will eject the tape. " " will
appear on the screen for about 4
seconds.
AUTOMATIC EJECT
If the VCR automatically rewinds the tape to the begin-
ning (AUTO REWIND FEATURE), the tape will be
ejected automatically (See the NOTE on page 19).
To play a prerecorded cassette tape.
NOTES: •Always eject the tape when not in use.
•The cassette can be ejected even if the VCR
is turn off.
This VCR selects the playback tape speed SP, LP or
SLP automatically.
LOADING AND UNLOADING
PLAYBACK
4F11701A P14-19 10/16/01, 1:34 PM17
18
RECORDING AND VIEWING THE
SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the
VCR mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on and select the video input mode
on the TV.
1Load a cassette tape with the
erase prevention tab intact.
The VCR will automatically
turn on.
2Press the SP/SLP button to
select the desired tape speed
SP or SLP.
The counter and SP or SLP
will appear on the screen for
about 4 seconds.
TO WATCH A TAPE REPEATEDLY
NOTE: To cancel repeat mode, follow the above steps
1 and 2, then press the ENTER button to select
the OFF position. Press the MENU button to
return to the TV.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video input
mode on the TV.
SLOW MOTION PLAYBACK
Press the SLOW button in the PLAYBACK mode.
Playback will proceed at 1/10th of the normal speed.
Press the PLAY button again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK
ADJUSTMENT
If noise bars appear in the picture during slow motion,
press the TRACKING SET + or – button to reduce the
noise bars.
If the still picture jitters excessively, press the
TRACKING SET + or – button to stabilize the still
picture.
" " will appear if you press the DISPLAY button.
To cancel, press the DISPLAY button again.
1Press the MENU button.
Press the TRACKING SET +
or – button to select the AUTO
REPEAT option.
2Press the ENTER button to
select the ON position.
3Press the MENU button.
If you press the PLAY button, the
tape will play over and over until
the repeat mode is canceled.
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
SPECIAL PLAYBACK
TO VISUALLY SEARCH FOR
DESIRED POINTS
When either the FF or REW button is pressed in the
PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase
speed. Speed search time depends upon the speed
used (SP, LP or SLP) during recording.
FRAME BY FRAME ADVANCE
Press the PAUSE/STILL button in the PLAYBACK mode.
Press the PAUSE/STILL button again to resume normal
playback.
Press the SLOW button during STILL playback.
The still picture will advance by one frame each time
you press the button. Hold the button for continuous
frame by frame viewing.
Press the PAUSE/STILL button again to resume normal
playback.
NOTES: •A few noise bars will appear on the picture
during SPEED SEARCH and STILL.
•The audio output is muted during SPEED
SEARCH, STILL, FRAME ADVANCE and
SLOW MOTION.
•To prevent damage to the tape, special
playback is automatically changed to the
PLAYBACK mode after 5 minutes.
RECORDING A TV
PROGRAM
00 : 00 : 00 SP
TO WATCH A STILL PICTURE
4F11701A P14-19 10/16/01, 1:34 PM18
19
4Press the REC button.
" ● " will appear on the screen
for about 4 seconds and the
REC indicator will light.
Press the PAUSE/STILL button
to avoid recording unwanted
material. Press again or press
the REC button to continue the
recording.
Press the STOP button to stop
recording.
" ■ " will appear on screen for
about 4 seconds.
TO STOP RECORDING
TO STOP RECORDING TEMPORARILY
NOTE: AUTO REWIND FEATURE
This VCR will automatically rewind the tape
when the tape has ended (except during OTR
and TIMER REC). It will also eject the tape and
turn the VCR’s power OFF.
"" will appear on screen for about 4 seconds and the
REC indicator will blink to continue pause mode.
NOTE: The pause function will be released after 5
minutes to prevent damage to the tape or the
VCR. The VCR will change to the STOP mode.
CH 110
While the VCR is recording, press the TV/VCR selector
button to select the TV position.
The TV/VCR indicator will go off and recording will
continue.
Select the TV channel you want to watch by using the
TV channel selector.
NOTE: Some CATV hookups do not permit viewing one
channel while recording another. See pages 12,13.
RECORDING ONE PROGRAM WHILE
WATCHING ANOTHER
After recording, break off the erase prevention tab if you
do not wish to record over the tape.
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of
the cassette housing.
Erase prevention tab
Adhesive tape
TO PREVENT AN ACCIDENTAL
RECORDING
Screwdriver
NOTE: Since the VCR has its own TV tuner, it is not
actually necessary to have the TV turned on in
order to make a recording. Turning on the TV
merely allows confirmation of the proper channel
settings on your VCR.
RECORDING A TV PROGRAM
3Press the direct channel selection buttons or the
CHANNEL ▲ or ▼ button to select the channel to be
recorded.
CH 110
VHF/UHF/CATV CHANNELS
TV CATV
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
1-9 Press 0 twice and then 1-9 as required.
Example: To select 2, Press “002”.
10-19 Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for “12”.
20-99 Press 2 digits in order.
Example: Press 22 for
“22”.
100-125 Press the 3 digits in
order.
Example: Press 110
for “110”.
TO RECORD AGAIN
4F11701A P14-19 10/16/01, 1:34 PM19
20
1Press the MENU button.
Check the TIMER REC SET
option is selected, then press
the ENTER button.
2Press the TRACKING SET + or
– button to select one of the
program line, then press the
ENTER button.
3Press the TRACKING SET +
or – button to select the date,
then press the ENTER
button.
4Set the start time, end time,
channel and tape speed as in
step 3.
NOTE: To record from external
source set the channel
to "L1" or "L2". “L1
(from AUDIO/VIDEO IN
jacks on the rear)” or
“L2 (from AUDIO/
VIDEO IN jacks on the
front)” will appear next
to CH 125 (or 69).
5To enter other programs,
repeat steps 2 through 4. Or,
press the MENU button twice
to return to the normal screen.
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
CHECK BEFORE YOU BEGIN
•Turn on the TV and set to the video channel 3 or 4.
•Press the TV/VCR selector button to select the VCR
mode.
•Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
•Check that the clock and date are correct (see page 15).
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
To cancel timer recording, press the button again and
the T.REC indicator will go out.
〈+/–/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
-:--
-:--
-:--
-:--
-:--
-:-- ---
-:-- -:-- ---
-:-- ---
-:-- ---
---
-:-- -:-- ---
-:-- -:-- ---
-:-- ---
------ -
------ -
------ -
-
------ -
------ -
------ -
------ -
26(SU)
〈
+/–/ENTER/CANCEL/MENU
〉
START END
DATE CH
-:--
〈
+/–/ENTER/CANCEL/MENU
〉
DATE START END CH
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
CH 125
OTR 0 : 30
NOTES: • Press the REC button
to increase the time
needed for recording
(See the chart ).
•To cancel OTR, press
the STOP button or
turn off the power.
CH 125
The One-touch Timer Recording feature provides
a simple and convenient way to make a timed
recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn on the VCR POWER button.
When a TV is connected with an audio/video cable, turn
the TV on and select the video input mode on the TV.
1Load a cassette tape with the
erase prevention tab intact.
2Press the SP/SLP selector
button to select the desired
tape speed SP or SLP.
The counter and SP or SLP
will appear on the screen for
about 4 seconds.
3Press the direct channel
selection buttons or the
CHANNEL ▲ or ▼ button to
select the channel to be
recorded.
The channel number will
appear on the screen for about
4 seconds.
4Press the REC button to begin
recording. Press the button
again to stop recording after
30 minutes. Each additional
press of the REC button will
increase recording time as
shown in the chart below, up to
a maximum of 5 hours. The
OTR and recording time will
appear on screen for about 4
seconds.
00 : 00 : 00 SP
ONE-TOUCH TIMER
RECORDING (OTR)SETTING THE TIMER
RECORDING
Press
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
Recording time
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
NORMAL REC
6Press the TIMER button. The power will go off, the
T.REC indicator will light and the VCR stands by for
recording.
4F11701A P20-BACK 10/16/01, 1:33 PM20
21
When setting the date in step 3, press the TRACKING
SET – button repeatedly.
The setting changes as follows:
Example
Press the TRACKING SET + or
– button to select the TIMER
REC SET option in the MENU.
Then press the ENTER button to
display the timer program list.
Press the MENU button twice to
return to the normal screen.
TO CONFIRM THE SETTINGS
TO SET DAILY/WEEKLY TIMER
Press the TRACKING SET + or –
button to select the TIMER REC
SET option in the MENU. Then
press the TRACKING SET + or –
button to select the unnecessary
program, and press the CANCEL
button to cancel the program.
IF THE PROGRAM OVERLAPS
ANOTHER
TO CANCEL A PROGRAM
8 : 00 11 : 00
9 : 00 10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
NOTES: •The everyday/every week recording can be
made continuously until the recording is
canceled or the tape reaches the end.
•During timer recording, the automatic
rewinding mechanism does not function.
Press the DISPLAY button.
Press the DISPLAY button.
Press the DISPLAY button again to make the display disappear.
Press the DISPLAY button again to make the display disappear.
Press the COUNTER RESET button. The counter will
appear on the screen.
TO SET THE COUNTER TO '00:00:00'
WHILE OPERATING A TAPE
WHILE WATCHING TV
NOTES: • If you rewind the tape from "00:00:00", a minus
sign ("–") will be displayed in front of the time.
•When you load a tape, the counter will change
to "00:00:00".
•The counter does not function on nonrecorded
(blank) sections of the tape. When you rewind,
fast forward or play tapes through blank sections,
the counter stops.
00 : 00 : 00 SP
CH 1258 : 30 AM THU
DAY OF THE WEEK
CHANNEL
TAPE
SPEED
REAL TIME COUNTER
CLOCK
NOTE: Do not overlap programs as portions of the
conflicting programs will be lost. The first
recording time has priority over the next recording
time as shown in the diagram.
〈
+/–/ENTER/CANCEL/MENU
〉
26 (WE)11:00PM 11:30PM
125SLP
DATE START END CH
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
〈
+/–/ENTER/CANCEL/MENU
〉
DATE START END CH
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
––––– –:–– –:–– –– –
While setting, press the ENTER button to flash the item
to correct, then re-enter the setting with the TRACKING
SET + or – button.
When finished, press the ENTER button.
NOTES: •The VCR cannot be used while the T.REC
indicator is lit.
•After a power failure or disconnection of the
power plug, all programmed recording
settings must be reset upon resumption of
power. In this case, reset the clock (see page
15) and reprogram any timer recordings.
•Press the CANCEL button to move cursor
backward for correction.
TO CORRECT THE SETTINGS
The current day (Friday) SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-WE WKL-TH (Weekly Thursday)
(Weekly Wednesday)
One month later
minus one day
ON-SCREEN FUNCTION
DISPLAY
00 : 00 : 00 SP
CH 1258 : 30 AM THU
OPERATING MODE
TAPE INAUTO REPEAT
SETTING THE TIMER RECORDING
4F11701A P20-BACK 10/16/01, 1:33 PM21
22
NOTES: • It is recommended that you set the SPEED to
the SP mode on the recording VCR for best
results.
• Unauthorized recording of copyrighted
television programs, films, video tapes and
other materials may infringe on the rights of
copyright owners and violate copyright laws.
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
If you connect the VCR to another VCR or camcorder,
you can duplicate a previously recorded tape.
Make all connections before turning on the power.
3Press the REC/OTR button on the recording VCR,
then press the PAUSE button.
4Press the PLAY button on the playback VCR, then
press the PAUSE/STILL button.
5Press the PAUSE/STILL button on both the VCRs
simultaneously to begin the duplicating process.
DUPLICATING A VIDEO TAPE
LINE 2
1Load a blank cassette tape with the erase prevention
tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
2Press the INPUT SELECT
button to select AUDIO/VIDEO
input position. "LINE2" will
appear on the screen.
AUDIO/VIDEO Cord (not supplied)
Playback VCR
To VIDEO OUT To AUDIO OUT
Recording VCR
To VIDEO IN To AUDIO IN
AUDIO/VIDEO Cord (not supplied)
To AUDIO IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
NOTE: You can also use the rear AUDIO/VIDEO IN
jacks. Select “ LINE1 ” by pressing the INPUT
SELECT button.
4F11701A P20-BACK 10/16/01, 1:33 PM22
23
The video heads are the means by which the VCR
reads pictures from the tape during playback. In the
unlikely event that the heads become dirty enough to be
clogged, no picture will be played back. This can easily
be determined if, during playback of a known good tape,
there is good sound, but no picture (picture is extremely
snowy). If the heads require use a high quality head
cleaning system or have them cleaned professionally.
NOTES: •Video heads may eventually wear out and
should be replaced when they fail to produce
clear pictures.
•To help prevent video head clogging, use
only good quality VHS tapes. Discard worn
out tapes.
VIDEO HEAD CLOGGING VIDEO HEAD CLEANING
Video head cleaning is needed when the playback
picture becomes unclear. This signifies that the heads
are getting dirty and can occur when playing poor quality
or damaged tapes. If the heads require cleaning use a
high quality head cleaning system or have them cleaned
professionally. If playing a head cleaning tape in the
VCR once does not improve the picture, play it several
times before requesting service.
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS
OR SERVICE THE UNIT BY REMOVING THE TOP
COVER.
VIDEO HEAD CLEANING
4F11701A P20-BACK 10/16/01, 1:33 PM23
24
No picture on screen when
playing back a recorded tape.
Noise bars on screen.
The TV is not set to the video channel
3 or 4.
Tracking adjustment beyond range of
automatic tracking circuit.
Video heads are dirty.
The tape is worn or damaged.
Set to the video channel 3 or 4 or
adjust the fine tuning button on your
TV set.
15
21
22
–
BEFORE REQUESTING SERVICE
Make sure by first checking the following points.
No power.
TV BROADCAST RECEPTION
Although the power is on, it
does not operate.
A TV program that is selected
by the VCR does not appear on
the screen.
A TV program selected by the
VCR does not appear in color.
RECORDING
TV recording does not work.
Timer recording does not work.
Antenna connection is not correct.
Antenna cable is disconnected.
The video channel is not in the
correct position.
The TV is not set to the video
channel 3 or 4.
The TV/VCR selector is set at TV mode
(The TV/VCR indicator is not lit).
INPUT SELECT is set to the LINE
mode.
The TV/CATV menu option setting.
The erase prevention tab of the video
cassette is broken off.
INPUT SELECT is set to the LINE
mode.
The time is not set correctly.
The recording start/end time is not set
correctly.
The TIMER button has not been
pressed (The T.REC indicator is not lit).
SYMPTOM CAUSE POSSIBLE SOLUTION PAGE
The AC power cord is not connected.
Cassette is not inserted.
Connect the AC power cord to the
AC outlet.
Insert a video cassette.
Connect it correctly.
Reconnect the antenna cable.
Set it to CH 3 or 4.
Set the TV channel selector to the 3
or 4 position.
Press the TV/VCR selector button
(The TV/VCR indicator will light).
Press the INPUT SELECT button to
select the TV mode.
Set the TV/CATV menu option to
select TV or CATV mode.
Place a piece of vinyl tape over the
gap.
Press the INPUT SELECT button to
select the TV mode.
Reset the present time.
Set the start/end time.
Press the TIMER button (The T.REC
indicator will light).
5
17
10
10
15
15
15
22
22
19
22
15
20
20
POWER
Adjust tracking manually using the
DIGITAL TRACKING button or the
TRACKING SET + or – buttons on
remote control.
Have the video heads cleaned.
Try another tape.
PLAYBACK
4F11701A P20-BACK 10/16/01, 1:33 PM24
25
Remote control does not work.
It is not aimed at the remote sensor.
Distance too far or too much light in
the room.
There is an obstacle in the path of
the beam.
The batteries are weak.
The +, – polarity of the batteries are
not inserted correctly.
The TV/VCR function is in the VCR
mode.
Aim it at the remote sensor.
Operate within 15 feet (5 meters)
reduce the light in the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
Set to TV, or turn off the VCR power
button.
6
6
6
TV programs cannot be seen
using the TV selector.
6
6
–
SYMPTOM CAUSE POSSIBLE SOLUTION PAGE
REMOTE CONTROL
Video Head:
Audio Track:
Power Source:
Power Consumption:
Tuner:
RF Channel Output:
Inputs/Outputs:
Video:
Audio:
Antenna:
4 Rotary Heads
MONO Sound - 1 Track
120V, 60Hz
Approx. 8 watts
181 Channel Freq. Synthesized
VHF 2-13
UHF 14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
Channel 3 or 4, Switchable
In (RCA) 1Vp-p/75 ohm
Out (RCA) 1Vp-p/75 ohm
In (RCA)–8dB/50K ohm
Out (RCA)–8dB/1K ohm
UHF/VHF IN 75 ohm coaxial
UHF/VHF OUT 75 ohm coaxial
F.FWD/REW Time:
Speed Search:
Dimensions:
Weight:
Remote Control:
Supplied accessories:
F. FWD: Approx. 4minutes and
50 seconds
REW: Approx. 2minutes and 30
seconds
(with T-120 Cassette Tape)
SP - 3 & 5 X Normal Speed
LP - 7 & 9 X Normal Speed
SLP - 9 & 15 X Normal Speed
Width: 14-3/16 inches (360mm)
Height: 3-7/8 inches (95mm)
Depth: 9 inches (229mm)
7.1 Ibs
Infrared, Direct Access,
2 x AAA batteries
Remote Control
Batteries (2 X AAA)
75 ohm Coaxial Cable
SPECIFICATIONS
Specifications are subject to change without notice.
Tape Speed shown is approximate.
4F11701A P20-BACK 10/16/01, 1:33 PM25
26
Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limited
warranties. These limited warranties extend to the original consumer purchaser or any person receiving this VCR as
a gift from the original consumer purchaser and to no other purchaser or transferee .
Limited Ninety (90) Day Warranty
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of ninety
(90) days after the date of original retail purchase. During this period, TACP and THI will repair a defective product or
part, without charge to you. You must deliver the entire VCR to an Authorized TACP/THI Service Station. You pay for
all transportation and insurance charges for the VCR to and from the Service Station.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of one
year after the date of original retail purchase. During this period TACP/THI will replace a defective part without
charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase
you pay labor charges involved in the replacement. You must also deliver the entire product to a TACP/THI Autho-
rized Service Station. You are responsible for all transportation for the VCR to and from the Service Station.
Rental Units
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited ninety (90) day warranty for all parts and rabor.
Owner's Manual and Demographic Card
You should read this owner's manual thoroughly before operating this product. You should complete and mail the
enclosed Demographic card within ten days after you, or the person who has given you this product as a gift,
purchased this product. This is one way to enable TACP/THI to provide you with better customer service and
improved products. Failure to return the Demographic card will not affect your rights under this warranty.
Your Responsibility
The above warranties are subject to the following conditions:
( 1 ) You must retain your bill of sale or provide other proof of purchase.
( 2 ) You must notify an Authorized TACP/THI Service Station within thirty (30) days after you discover a defective
product or part.
( 3 ) All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.
( 4 ) These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.
( 5 ) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair of
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems
are your responsibility.
( 6 ) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any
product or parts which have been lost or discarded by you or to damage to products or parts caused by
misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, improper
installation, improper maintenance or use in violation of instructions furnished by us; or to units which have
been altered or modified without authorization of TACP/THI.
( 7 ) At you option, after the warranty period has expired in the U.S.A. Call (800)-631-3811 to receive information
concerning an exchange price. Payment must be enclosed with the product in the form of a certified check or
money order and forward your product to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087.
( 8 ) Upon receipt we will, at our option, replace your unit with a new or refurbished unit of equal value. Features
may not be identical to your original product.
( 9 ) Physically damaged units are not acceptable for repair or exchange in or out of warranty and will be returned
as received.
LIMITED WARRANTY TOSHIBA VIDEO CASSETTE RECORDER
4F11701A P20-BACK 10/16/01, 1:33 PM26
27
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties,
guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of
any parts. In no event shall TACP or THI be liable for consequential or incidental damages. No person, agent,
distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner
whatsoever. The time within which action must be commenced to enforce any obligation of TACP or THI arising
under this warranty or under any statute, or law of the United States or any state thereof, is here by limited to 90
days from the date you discover or should have discovered, the defect. This limitation does not apply to implied
warranties arising under state law. This warranty gives you specific legal rights and you may also have other rights
which may vary from state to state. Some states do not allow limitation on how long an implied warranty lasts, when
an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above
provisions may not apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian "Warranty Registration Form" enclosed, and
forward this completed form with a copy of bill of sale to TOSHIBA OF CANADA to "Register and Validate" their
warranty. Products must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and
used in Canada are not covered by these warranties. Products purchased in Canada and used in the U.S.A. are not
covered by these warranties.
How to Obtain Warranty Service
If after following all of the operating instructions in this manual and checking the section "BEFORE REQUESTING
SERVICE" and you still find that service is needed;
( 1 ) In the U.S.A. call the TACP toll free number 1-800-631-3811 after you find a defective product or part to
find the nearest Toshiba Authorized Service Station.
( 2 ) Arrange for the delivery of the product to the Authorized TACP/THI Service Station. Products shipped to
the Authorized Service Station must be insured and safely and securely packed, preferably in the original
carton, and a letter explaining the problem must be enclosed. You are responsible for all transportation
and insurance charges to and from the Authorized Service Station.
In Hawaii Contact
Toshiba Hawaii,
327 Kamakee Street,
Honolulu, HI 96814
(808) 591-8377
Toll Free
1-800-631-3811
In the Continental United States call:
4F11701A P20-BACK 10/16/01, 1:33 PM27
28
4F11701A U
01/11 Printed in Thailand
4F11701A P20-BACK 10/16/01, 1:33 PM28