OSEE TECHNOLOGY LMW-230LCD LCD Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1828607
Application ID	NFvZ+IO2KGkd0CsvkVfvkQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.76kB (697009 bits)
Date Submitted	2012-11-02 00:00:00
Date Available	2012-11-02 00:00:00
Creation Date	2012-10-18 16:58:50
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-10-31 10:05:26
Document Title	Microsoft Word - LMW-230 Series LCD MONITOR-user manual-English-V010003.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	AC

LMW-230 SERIES LCD
MONITOR
USER MANUAL
PRODUCT INFORMATION
MODEL: LMW-230 SERIES LCD MONITOR
Version: V010002
Release Date: August 20, 2012
COMPANY NAME
Beijing Osee Digital Technology Ltd.
CONTACT INFORMATION
HEAD OFFICE
Address: Room 702, Tower D, Jinyujiahua Building, No.9, 3rd Shangdi Street, Haidian
District, Beijing, China
Post code: 100085
Tel: 8610-62968823
Fax: 8610-62977165
Http://www.osee-dig.com
E-mail:sales@osee-dig.com
About The USER MANUAL
The user manual applies to the following device types:
z LMW-230H
z LMW-230S
z LMW-230V
The images of LMW-230H are adopted in the following descriptions. Any of the different
specifications between the device types are elaborated. Before reading the manual, please
confirm the device type.
Note: These products are the commercial equipments and are not recommended being used
in the household environment.
Contents
Chapter 1 Product Overview ...................................................................................... 1
Chapter 2 Unpacking and Installation ........................................................................ 2
Chapter 3 Dimensions ............................................................................................... 3
Chapter 4 Operation .................................................................................................. 5
4.1
4.2
4.3
4.4
4.5
Status Display ............................................................................................................... 5
Supported Signals ......................................................................................................... 5
Rear Panel Terminals ................................................................................................... 6
Location and Function of Control Buttons And Knobs On Front Panel ......................... 9
Input Signals and Adjustable/setting Items.................................................................. 10
Chapter 5 Menu Operation Guide ............................................................................ 11
5.1
5.2
Selecting the Menu Language .................................................................................... 11
Using the Menu ........................................................................................................... 12
Chapter 6 LMW-230 Series LCD Monitor Menu Structure ....................................... 13
6.1
6.2
Main Menu .................................................................................................................. 13
Adjusting and Changing the Settings .......................................................................... 13
Chapter 7 Technical Specifications .......................................................................... 26
7.1
7.2
7.3
7.4
LED Detailed Information: ........................................................................................... 26
Inputs .......................................................................................................................... 26
Component Level Definition ........................................................................................ 26
Standard Definition Video, Frame Refresh Rate and Color Matrix (1920×1080) ......... 27
Chapter 8 Supplied Accessories .............................................................................. 28
LMW-230 SERIES LCD MONITOR
User Manual
Chapter 1 Product Overview
Overview
The LMW-230 is a cost-effective 23 inch LCD monitor that can be used for post production rooms,
broadcasters and mobile units, monitoring multi-format high definition video and audio.
The LMW-230 is equipped with 1920×1080 high resolution panel and capable of displaying multiple
formats high definition signal at native resolution. Advanced digital video processing technology such as
precise 3D de-interlace, scaling, Gamma and color correction is used to ensure high display quality.
The LMW-230 can accept Video, S-video, component, SDI and HDMI format SD/HD video signal as well
as VGA or DVI PC signal.
It has various On-Screen Display feature, can display 8 channels of audio meter, time code, UMD and tally
on the LCD panel. Other features like H/V delay, NATIVE, blue/mono display, area marker and safety
marker are standard for the monitor.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guaran-tee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Features
™
1920×1080 Native Resolution Panel
™
High Quality Color Reproduction
™
Various Area, Safety and Center Marker
™
H/V Delay, NATIVE, Blue/Mono Display
™
8 Channel Audio Meters, Time code，UMD, Tri-color Tally
™
Field upgradeable
™
Audio De-embedding for SDI Input
™
Build-in Speaker and Audio Line Output
-1-
LMW-230 SERIES LCD MONITOR
User Manual
Chapter 2 Unpacking and Installation
Unpack the LMW-230 Monitor and inspect for any apparent physical damage that may have occurred in
transit. In addition to the monitor, the packaging should contain a power cord, warranty card, a power
adapter (AC to DC) and table stand. There are also seven M4 x 8mm screws for table stand attaching.
We recommend you retain the shipping carton for future use.
1. When installing the table stand, please assure a soft and non-scratch surfaced is used to place the
monitor on.
2. Place the monitor on the soft surface screen face down for installation of table stand.
3. Use the included screws to attach the table stand.
The table stand attaches on the rear bottom of the nonitor. Please refer to Chapter 3 for further
reference.
Attaching the table stand
4. Place the LMW-230 in the required location for operation.
5. Connect the required signals. For BNC connections use 75Ω rated connectors.
6. Connect A.C. Mains power using the included EIC power cord. Please ensure an Earth ground
present to ensure proper operation of the unit.
7. As a final step turn on the mains power using the toggle switch located on the rear of the LMW-230
above the power connection.
-2-
LMW-230 SERIES LCD MONITOR
Chapter 3 Dimensions
Front View （Unit: mm）
Rear View
-3-
（Unit: mm ）
User Manual
LMW-230 SERIES LCD MONITOR
Side View
Top Side View
-4-
（Unit: mm）
（Unit: mm）
User Manual
LMW-230 SERIES LCD MONITOR
User Manual
Chapter 4 Operation
4.1
Status Display
Wave form or
vector graph
TALLY Indicator
Signal format
Area & Safety
Marker
Audio Meter
Headset jack
UMD
Time Code
) Tally Indicator：
It is used to check the status of the monitor by the color of the tally lamp.
(For more information, see the fourth page of “USER CONFIG” menu)
) Headset jack
Output the audio which is selected by the input terminal select button.
) Wave form or vector graph
It is used to check the wave form or vector graph of the displaying signal picture.
Only used for SDI signal.
You can open and set the wave form or vector graph on the second page of “USER CONFIG” menu.
4.2
Supported Signals
The following signals are supported by the LMW-230 H monitor:
Format
SDI
Video
Y/C
YPbPr
HDMI
DVI
VGA
NTSC
YES
YES
PAL
YES
YES
SECAM
YES
YES
NTCS-4.43
YES
YES
PAL-M
YES
YES
-5-
LMW-230 SERIES LCD MONITOR
480I60
YES
YES
YES
576I50
YES
YES
YES
480P60
YES
YES
576P50
YES
YES
720P24
YES
YES
YES
720P25
YES
YES
YES
720P30
YES
YES
YES
720P50
YES
YES
YES
720P60
YES
YES
YES
1080I60
YES
YES
YES
1080I50
YES
YES
YES
1080P24
YES
YES
YES
1080P25
YES
YES
YES
1080P30
YES
YES
YES
YES
1080P50
YES
1080P60
YES
YES
1080SF24
YES
YES
YES
VGA
YES
YES
SVGA
YES
YES
XGA
YES
YES
SXGA
YES
YES
UXGA
YES
YES
WVGA
YES
YES
WXGA
YES
YES
WUXGA
YES
YES
“YES”: Adjustable/can be set;
4.3
User Manual
“\”
: Not adjustable/cannot be set
Rear Panel Terminals
A. Audio and Video Connections
-6-
LMW-230 SERIES LCD MONITOR
User Manual
The specifications of terminals are as follows ：
SDI IN1: SDI 1 Input Terminal
SD-SDI input signal which is in compliance with SMPTE259M and ITU-R BT656 standard.
SDI IN2: SDI 2 Input Terminal
SD-SDI input signal which is in compliance with SMPTE259M and ITU-R BT656 standard.
SDI OUT: SDI Output Terminal
Output terminal for selected SDI signal.
LINE1(VIDEO) : LINE 1 Input Terminal
Analog Composite Video Signal only.
LINE2 (VIDEO/Y): LINE 2 Input Terminal
Analog Composite Video input signal, or luminance (Y) signal of Y/C or YPbPr.
LINE2 (C/Pb): LINE 2 Input Terminal
Chroma (C) signal of Y/C or Pb(Blue) component of YPbPr .
LINE2 (Pr): LINE 2 Input Terminal
Pr (Red) component of YPbPr .
DVI-I (DVI-D/VGA/HDMI): DVI-I Input Terminal
DVI analog/digital. Requires adapter for VGA signals. Supports HDMI input signal.
AUDIO IN1: Analog Audio (IN1) Terminal
Input terminal for the analog audio signal.
L:left audio channel; R: right audio channel.
AUDIO IN2: Analog Audio (IN2) Terminal
Input terminal for the analog audio signal.
L:left audio channel; R: right audio channel.
AUDIO OUT: Analog Audio (OUT) Terminal
Outputs the audio signal which is selected by the input select button on the front panel.
L:left audio channel; R: right audio channel.
GPI ：GPI Terminal
-7-
LMW-230 SERIES LCD MONITOR
User Manual
Female RJ-45 Receptacle
PIN
Description
PIN 1
GPI1
PIN 2
GPI2
PIN 3
GPI3
PIN 4
GPI4
PIN 5
GPI5
PIN 6
GPI6
PIN 7
NC
PIN 8
GND
For the detailed information about GPI 1-GPI 6, see the fourth page of “USER CONFIG” menu.
CONFIG ：Configuration Terminal
It is used to update the hardware program only.
RS485 IN : RS485 IN Terminal
It is used to support dynamic UMD/Tally.
RS485 OUT : RS485 OUT Terminal ；
It is used to support dynamic UMD/Tally
Female RJ-45 Receptacles
Pin No.
RS485 IN Terminal Signal
RS485 OUT Terminal Signal
1,2
GND
GND
Tx-
Tx-
Rx+
Rx+
Rx-
Rx-
Tx+
Tx+
7,8
NC
NC
-8-
LMW-230 SERIES LCD MONITOR
User Manual
B. The right part of rear panel
Power Input Connector
Power Switch
O/– (Power) Switch
The power is turned on or off.
The monitor is turned on by pressing side–.
Power Input Connector
Total power consumption: 100-240V AC, 50-60Hz.
Equipment power consumption: 40W.
A power source with the capacity of more than 45W is recommended.
4.4
Location and Function of Control Buttons And Knobs On Front Panel
SDI1
SDI2
LINE1
LINE2
DVI-I
F1
MENU
DOWN/F2
SDI 1 switch key
SDI 2 switch key
VIDEO1 switch key
VIDEO2/YC/YPBPR switch key
VGA/DVI/HDMI switch key
Related to the menu page of user config 3/5 “F1 BUTTON”.
Call out Main Menu. Or make the Main Menu disappear when it is on.
Following Three status:
No any Menu: F3, Related to the menu page of user config 3/5 “F2 BUTTON”.
Main Menu:
Select the next Item on the Menu.
Volume/Brightness/Contrast/Chroma/Phase Menu: show current value
UP/F3
The following Three status:
No Menu: Related to the menu page of user config 3/5 “F3 BUTTON”.
Main Menu: Select the Pre Item on the Menu.
Volume/Brightness/Contrast/Chroma/Phase Menu: Decrease current value
ENTER
The following two status:
No any Menu: Switch between Volume/Brightness/Contrast/Chroma/Phase Menu
Page.
Main Menu: Press the key to enter the adjustable menu page.
POWER
Power on/off key
NOTE: Press ENTER 10 seconds and the default setting menu will display. And it will return
back to default setting.
-9-
LMW-230 SERIES LCD MONITOR
User Manual
The default setting menu is as following:
Sub Menu
Settings
Explanation
FACTORY MENU
LOGO TYPE
OFF


LOGO TIME
OFF
2~5second
Input Signals and Adjustable/setting Items
Item
Contrast
Bright
Chroma
Phase
Sharpness
NTSC Setup
Compo
Level
Color Temp
SCAN
ASPECT
MARKER
BLUE ONLY
MONO
H/V DELAY
DOT PHASE
H Position
V Position
Audio
Time Code
UMD
Audio Meter
Input signal
VideoY/C
YES
YES
YES
NTCS
YES
NTSC
SMPTE
YPbPrSD
YES
YES
YES
YPbPrHD
YES
YES
YES
SDI SD
YES
YES
YES
SDI HD
YES
YES
YES
HDMI
YES
YES
YES
YES
YES
YES
YES
YES
480I60
SMPTE
SMPTE
SMPTE
SMPTE
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
SD/YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
DVI
YES
YES
VGA
YES
YES
YES
FULL
YES
FULL
YES
YES
YES
Ext
Ext
Ext
YES
YES
YES
YES
YES
YES
Ext/Ebd
YES
YES
YES
NOTE:“YES”: Adjustable/can be set; “\”
Ext/Ebd
YES
YES
YES
Ext/Ebd
YES
YES
: Not adjustable/cannot be set
- 10 -
LMW-230 SERIES LCD MONITOR
User Manual
Chapter 5 Menu Operation Guide
5.1
Selecting the Menu Language
You can select one of two languages (English, Chinese) for displaying the menu and other on-screen
displays. ”English” is selected in the default setting.
marks on the illustrations of the menu screen.
The current settings are displayed in place of the
1. Turn on the unit.
2. Press MENU button.
The menu appears.
The menu presently selected is shown in yellow.
3. Press ∧（up）or ∨(down) button to select the first page of USE CONFIG menu, then press the
ENTER button. The setting items (icons) in the selected menu are displayed in yellow.
4. Press ∧（up）or ∨(down) button to select “LANGUAGE,” then press the ENTER button. The
selected item is displayed in yellow.
5. Press ∧（up）or ∨(down) button to select a language, then press the ENTER button. The menu
changes to the selected language.
To clear the menu:
Press the MENU button.
The menu disappears automatically if none of the buttons is operated for one minute.
- 11 -
LMW-230 SERIES LCD MONITOR
User Manual
Using the Menu
The unit is equipped with an on-screen menu for making various adjustments and settings such as STATUS,
COLOR TEMP, MARKER, etc.
marks on the illustrations of the menu screen.
The current settings are displayed in place of the
(1)
(2)
(3)
(1): Main Menu Item Select Field
Pressing Up/down key can select the sub menu.
Pressing Enter key can enter into the control item.
Pressing Menu key can quit the main menu.
(2): Sub Menu Item Select Field
Pressing Up/down key can select the control item.
Pressing Enter key can enter into the sub adjustable item.
Pressing Menu key can return to main menu.
(3): Control Item Select Field
Pressing Up/down key can adjust the item value, if the item is adjustable.
Pressing Enter key can save and quit current item. The item in white means the value is adjustable, the
item in blue means the value is not adjustable.
Pressing Menu key can quit current item, but can not save adjusted item.
While the menu is on, it can refresh the menu, if the input changed
To clear the menu:
Press the MENU button.
The menu disappears automatically if none of the buttons is operated for one minute.
- 12 -
LMW-230 SERIES LCD MONITOR
User Manual
Chapter 6 LMW-230 Series LCD Monitor Menu Structure
6.1
Main Menu
The screen menu of this monitor consists of the following items.
[Label]
6.2
[Main Menu Item]
[Sub Menu]
STATUS
COLOR TEMP
MARKER
VIDEO CONFIG
AUDIO CONFIG
USER CONFIG
CONTROL
Adjusting and Changing the Settings
STATUS
The STATUS menu is used to display the current status of the unit. The following items are displayed.
For the video inputs include SDI1, SDI2, Line1, Line2 or DVI-I (HDMI input only), the following
items are displayed.
STATUS
FORMAT
SDI1
1080I50
COLOR TEMP
D65
COMPONENT LEVEL
SMPTE
NTSC SETUP
7.5
SCAN MODE
NORMAL
AUTO STANDBY
ON
MODEL*
LMW-230H
- 13 -
LMW-230 SERIES LCD MONITOR
User Manual
For the DVI/VGA input, the following items are displayed.
STATUS
FORMAT
DVI-I:DVI-D
SXGA
COLOR TEMP
D65
fH
15.63kHz
fV
60Hz
AUTO STANDBY
ON
MODEL*
LMW-230H
* For Model, it will display LMW-230H or LMW-230S or LMW-230V, depending on the unit model.
COLOR TEMP
The COLOR TEMP menu is used for adjusting the picture white balance.
Sub Menu
Settings
Explanation
COLOR TEMP
-COLOR TEMP
D65
Used to select the color temperature that will become the basis
for adjustments:
y  around 9300K
y  around 6500K
y  around 5600K
y 
-RED GAIN
0-255
<0-60>, factory preset settings: 128
-GREEN GAIN
0-255
<0-60>, factory preset settings: 128
-BLUE GAIN
0-255
<0-60>, factory preset settings: 128
- 14 -
LMW-230 SERIES LCD MONITOR
-RED BIAS
0-64
<0-60>, factory preset settings: 32
-GREEN BIAS
0-64
<0-60>, factory preset settings: 32
-BLUE BIAS
0-64
<0-60>, factory preset settings: 32
-RESET
User Manual
This returns the GAIN and BIAS settings to the factory presets
When adjusting the GAIN and BIAS settings, the item display moves to the middle part of the screen.
MARKER
The MARKER menu is used for setting the marker.
Sub Menu
Settings
Explanation
MARKER
-MARKER ENABLE
-AREA MARKER
ON
15:9
-CENTER MARKER
ON
-SAFETY MARKER
OFF
 marker displayed
 marker not displayed
Selects the area marker aspect ratio according to the
display aspect,
) For display aspect ratio is 16:9

<4:3> vertical
<15:9> vertical
<14:9>vertical
<13:9> vertical
<1.85:1> horizontal
<2.35:1> horizontal
) For display aspect ratio is 4:3

<16:9>
 marker displayed
 marker not displayed
Setting the picture safe area size marker for the aspect
ratio determined by the button which the aspect
function is assigned.
(According to display aspect and SCAN control)
y 
y <80%>
y <85%>
y <88%>
y <90%>
y <93%>
y <95%>
- 15 -
LMW-230 SERIES LCD MONITOR
Sub Menu
Settings
Explanation
-MARKER LEVEL
<1>
-MARKER MAT
™
™
User Manual

Sets the luminance to display safety, center and area
marker line.
y <1>: 50% white level
y <2>: 75% white level
y <3>: 100% white level
Sets the area marker mat transparency.
y  : Normal background, only use line for area
marker edge indication
y  : 50% background brightness
y  : Black
16:9 and 4:3 area marker settings are stored separately.
Use 16:9 setting if display aspect is 16:9; Use 4:3 setting if display aspect is 4:3
Marker is disabled when SCAN is NATIVE, input is DVI or VGA.
VIDEO CONFIG
For the video inputs include SDI1, SDI2, Line1, Line2 or DVI-I (HDMI input only), the following
items are displayed.
Sub Menu
Settings
Explanation
VIDEO CONFIG
PICTURE CONTROL
-APERTURE
<0-100>
For the DVI/VGA input, the following items are displayed.
- 16 -
LMW-230 SERIES LCD MONITOR
Sub Menu
Settings
User Manual
Explanation
VIDEO CONFIG
PICTURE CONTROL
-AUTO SETUP1
Automatic Pixel Adjustment, press to adjust the
picture automatically to maximize clarity and correct
H/V position for the VGA input signal
-SHIFT H
50
Adjusts the horizontal position of the picture
<0-100>
-SHIFT V
50
Adjusts the vertical position of the picture
<0-100>
-DOT PHASE
50
Adjusts the dot phase
<0-100>
1.
For “AUTO SETUP” menu, it is valid for VGA input, but not valid for DVI input.
AUDIO CONFIG
For the video inputs include SDI1, SDI2, Line1, Line2 or DVI-I (HDMI input only), the following
items are displayed.
Sub Menu
Settings
Explanation
AUDIO CONFIG 1/3
GENERAL SETUP
-NEXT PAGE
- 17 -
LMW-230 SERIES LCD MONITOR
-SOURCE TYPE
-SPEAKER L
Sub Menu
-SPEAKER R
-METER POSITION
EXT
AUD 1L
(EBD CH1)
Settings
User Manual
Used to select the audio source type

 can be selected only for SDI or HDMI input

Select the audio channel to the left speaker based on the
selected audio source type
) 
) If SOURCE TYPE is EXT

) If SOURCE TYPE is EBD and SDI input

) If SOURCE TYPE is EBD and HDMI input

Explanation
AUD 1R
(EBD CH2)
The same as above
HORIZONTAL


-METER DISP
OFF


-METER 1-4 DISP
OFF

<1-2>
<1-4>
-METER 5-8 DISP
OFF

<5-6>
<5-8>
Press ∧(up)or ∨(down) button to select “NEXT PAGE” item, then press Enter button to display the
next page menu as follows.
Sub Menu
Settings
Explanation
AUDIO CONFIG 2/3
METER SOURCE
-NEXT PAGE
-METER 1
AUD 1L
(EBD CH1)
Used to assign the audio channel for meter display
based on the selected audio source type
- 18 -
LMW-230 SERIES LCD MONITOR
User Manual
) 
) If SOURCE TYPE is EXT

) If SOURCE TYPE is EBD and SDI input

) If SOURCE TYPE is EBD and HDMI input

-METER 2
AUD 1R
(EBD CH2)
The same as above
-METER 3
AUD 2L
(EBD CH3)
The same as above
-METER 4
AUD 2R
(EBD CH4)
The same as above
-METER 5
OFF
(EBD CH5)
The same as above
Sub Menu
Settings
Explanation
-METER 6
OFF
(EBD CH6)
The same as above
-METER 7
OFF
(EBD CH7)
The same as above
-METER 8
OFF
(EBD CH8)
The same as above
Press ∧(up)or ∨(down) button to select “NEXT PAGE” item, then press Enter button to display the
next page menu as follows. Select “NEXT PAGE” item in the following menu, it will return to display the
first page menu of “AUDIO CONFIG”.
Sub Menu
Settings
Explanation
AUDIO CONFIG 3/3
LEVEL SETUP
-NEXT PAGE
-REF LEVEL
-20dB
-OVER LEVEL
-10dB
<-20dB>
<-18dB>
<-10dB>
<-8dB >
<-6dB >
<-4dB >
<-2dB >
- 19 -
LMW-230 SERIES LCD MONITOR
User Manual
USER CONFIG
The USER CONFIG menu is used for setting the LINE 2 input, DVI-I input, language, etc.
Sub Menu
Settings
Explanation
USER CONFIG 1/5
SYSTEM SETUP
-NEXT PAGE
-BACKLIGHT1
50
-LINE 2 INPUT
VIDOE
-DVI-I INPUT2
VGA
-AUTO STANDBY
-LANGUAGE
OFF
ENGLISH
-COMPONENT
LEVEL3
SMPTE
-NTSC SETUP4
-COLOR MATRIX5
601
Adjusts the backlight
<0 ... 100>
Selects the LINE 2 input type
y 

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2012:10:18 16:58:50+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:10:31 10:05:26+08:00
Metadata Date                   : 2012:10:31 10:05:26+08:00
Format                          : application/pdf
Title                           : Microsoft Word - LMW-230 Series LCD MONITOR-user manual-English-V010003.doc
Creator                         : AC
Document ID                     : uuid:8787a08f-a717-4ccd-a7de-4329f5245548
Instance ID                     : uuid:8a311a8f-8efa-4d9e-a679-241a4abd961e
Page Count                      : 32
Author                          : AC

EXIF Metadata provided by EXIF.tools