OSIM OS-158 uCrown3 User Manual OS 158 uCrown 3 FCC Instruction path

OSIM INTERNATIONAL LTD uCrown3 OS 158 uCrown 3 FCC Instruction path

User Manual

1OS-158 uCrown 3Thank you for purchasing the OSIM uCrown 3. Before you start using the uCrown 3, please read the operation manual thoroughly for the correct methods of usage, paying special attention to the section on safety.This manual should be kept on hand for easy reference. It is your guide to a safe and efficient operation. ENGLISHContents Safety 2Names of parts and functions 4Features and effectiveness 6Preparation before use 7Operation 9Product care and storage 12 Troubleshooting 13Specifications 14OS-158 uCrown3 OP Eng Rev00 - Path.indd 1 1/11/2016 3:59:53 PM
2OS-158 uCrown3 OP Eng Rev00 - Path.indd 2 1/11/2016 3:59:54 PM
3Usage safety • Do not use the product when your hair or body is wet or operate with wet hands.• The suggested usage duration is 10 minutes. Ensure that the product rests for 10 minutes before it is being used again.• The product has a heated surface. Users insensitive to heat must be careful when using the product. • The user is advised to keep the audio volume at a reasonable level. Continued usage at a high volume can lead to permanent hearing damage. • Do not sit, stand or exert pressure on the product as this may damage the product.• Do not use the product while lying down.• Do not use the product if you have an eye or head operation recently.• Do not wear spectacles or contact lenses while using the product.• Do not use the product while driving a car.• Do not use the product other than for its stated purpose.• Stop using upon detection of any malfunction during operation.• Stop using immediately and consult your doctor should you experience any discomfort or any abnormal or severe pain.• If you are under medication or with medical conditions, please consult your doctor before use. • Please do not use the product if you are not feeling well or under the influence of alcohol. • The product is not intended for self-diagnosis or self-treatment for conditions that should be managed by a qualified health care provider.• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.• Children should be supervised by an adult to ensure that they do not play with the product.SafetyOS-158 uCrown3 OP Eng Rev00 - Path.indd 3 1/11/2016 3:59:54 PM
41. Top adjustable knob 2. Crown massage unit (Airbags concealed under fabric)3. Back adjustable knob4. Main switch5. Earphone jackHead unit Back view6. [ ] Air release button7. Battery compartment (4x AA batteries) 8. Earphones9. Airbags and massage nodes (concealed under fabric)Names of parts and functions345126789OS-158 uCrown3 OP Eng Rev00 - Path.indd 4 1/11/2016 3:59:54 PM
5123Remote control45671. Auto massage program LED indicators2. [ ] ‘Auto massage program’ button 3. Airbag massage LED indicator4. [ ] ‘Airbag massage’ button5. [ ] ‘Vibration massage’ button6. Vibration massage LED indicator 7. [ ] ‘Power/Stop’ button8. Heat function LED indicator9. [ ] ‘Heat function’ button 10. [ ][ ] ‘Volume’ buttons 11. Battery compartment (2x AAA batteries)Names of parts and functions11lllllluCrown 397102358416OS-158 uCrown3 OP Eng Rev00 - Path.indd 5 1/11/2016 3:59:54 PM
6Acupressure points:• Temple: Relieves fatigue, stimulates circulation and rejuvenates one’s mind • Crown: Relieves headaches, improves quality of sleep• Forehead: Relieves tired eyes• Neck: Relieves stiff neck and insomniaNeckTempleForeheadCrownTempleFeatures and effectivenessOS-158 uCrown3 OP Eng Rev00 - Path.indd 6 1/11/2016 3:59:54 PM
7Preparation before useBattery installation 1. Open the battery compartment cover at the back of the uCrown 3 and remote control.2. Insert 4x 1.5V AA batteries into the uCrown 3 head unit.3. Insert 2x 1.5V AAA batteries into the remote control.4. Please ensure that the (+) and (-) polarities of the batteries are fitted correctly.5. Close the battery cover once the batteries have been properly inserted. Note• Remove batteries from the battery compartment when the uCrown 3 is not in use for a long time so as to prevent any battery leakage. OS-158 uCrown3 OP Eng Rev00 - Path.indd 7 1/11/2016 3:59:54 PM
8Preparation before usePutting on uCrown 3 1. Put on the uCrown 3 on your head as illustrated below. Ensure that the uCrown 3 does not cover your eyes.2. Adjust to a comfortable position by turning the adjustable knob at the top and back of the uCrown 3.Top adjustable knobBack adjustable knob• Please remove your spectacles before using the uCrown 3 as it may cause discomfort during use.• Please ensure that the airbags are deflated before putting on the uCrown 3. If airbags stop inflating halfway, please change to fresh batteries and switch on the uCrown 3. CautionOS-158 uCrown3 OP Eng Rev00 - Path.indd 8 1/11/2016 3:59:54 PM
9Turn ON the uCrown 3 • Turn ON the uCrown 3 by sliding up the main switch to ‘On’ at the back of the head unit to start auto massage program 1. • Press and hold the ‘Power/Stop’ button [ ] on the remote control for more selections.Turn OFF the uCrown 3 • At any time during operation, press and hold the ‘Power/Stop’ button [ ] on the remote control for 3 seconds to end massage program.• Turn OFF the uCrown 3 by sliding down the main switch to ‘Off’ at the back of the head unit. Note• If there is no activity after 3 minutes, the head unit will go into sleep mode when the main switch is ‘ON’.• Slide down to ‘Off’, then slide up to ‘On’ to reset the uCrown 3. OperationOS-158 uCrown3 OP Eng Rev00 - Path.indd 9 1/11/2016 3:59:54 PM
10OperationAuto massage programs • Press the ‘Auto massage program’ button [ ] on the remote control to select from 3 auto massage programs. Each auto massage program comes with a different music track. Auto massage program 1 (Relax) features airbag massage and heat. The [ ] and [ ] LED indicators on the remote control will light up. Auto massage program 2 (Balance) is a combination of airbag massage, heat and vibration massage. The [ ] , [ ] and [ ] LED indicators on the remote control will light up. Auto massage program 3 (Energize) is a combination of airbag massage and vibration massage. The [ ] and [ ] LED indicators on the remote control will light up.Auto massage program adjustments Airbag intensity:• During all massage programs, you can adjust the airbag massage intensity to ‘High’ or ‘Low’ by pressing the ‘Air massage’ button [ ].• By default, the airbag massage will be at ‘Low’ intensity. The LED indicator will emit a constant red light. • Press the ‘Air massage’ button [ ] once to switch the airbag massage intensity to ‘High’. The LED indicator will emit a blinking red light. • Press the ‘Air massage’ button [ ] again to switch off the air massage. The LED light will not illuminate. • Press the ‘Air massage’ button [ ] again to return to ‘Low’ intensity and repeat the toggling cycle. On/Off heat function:• During Auto massage programs 1 and 2, you can ‘On’ or ‘Off’ the heat function by pressing the ‘Heat function’ button [ ].• By default, the ‘Heat function’ button [ ] will be ‘On’. The LED indicator will emit a constant red light.• Press the ‘Heat function’ button [ ] once to ‘Off’ the heat function. The LED indicator will not illuminate.• Press the ‘Heat function’ button [ ] again to return to ‘On’ and repeat the toggling cycle.OS-158 uCrown3 OP Eng Rev00 - Path.indd 10 1/11/2016 3:59:55 PM
11Operation• Keep each massage session to no longer than 10 minutes.• In the event that the airbags do not deflate, press the ‘Air release’ [ ] button to release the air. Auto massage program adjustmentsOn/Off vibration:• During Auto massage programs 2 and 3, you can ‘On’ or ‘Off’ the vibration massage by pressing the ‘Vibration massage’ button [ ].• By default, the ‘Vibration massage’ button [ ] will be ‘On’. The LED indicator will emit a constant red light.• Press the ‘Vibration massage’ button [ ] once to ‘Off’ the vibration. The LED indicator will not illuminate.• Press the ‘Vibration massage’ button [ ] again to return to ‘On’ and repeat the toggling cycle.Music volume:• The uCrown 3 comes with 3 different music tracks for each auto massage program.• By default, the volume is set at level 4. Press the ‘Volume’ buttons [ ] / [ ] to adjust the volume (levels 0 to 8).• Press and hold the [ ] button for 3 seconds to mute the music. To unmute, press the [ ] button and the music will resume at level 1. CautionOS-158 uCrown3 OP Eng Rev00 - Path.indd 11 1/11/2016 3:59:55 PM
12Product care and storageProduct placement and storageEnvironmental factors can strongly affect the product physically and mechanically. Do not expose the product to direct sunlight or places with extreme heat or air-conditioning vents. These can cause the product to crack or the color to fade.If the product is not going to be used for a long period of time, cover it with a dust cover and remove all the batteries from the battery compartment.Clean the product regularly using a dry clothBefore cleaning, ensure that the product is turned off and the batteries are removed.The main unit structure can be cleaned thoroughly with a piece of soft, dry cloth. Common micro-fibre cleaning materials or gloves are very well suited for this routine maintenance process. Such materials and gloves are available for sale at most DIY shops.Do NOT use wet elements for cleaningThe product is made up of electrical components and mechanical parts, which are very sensitive to moisture. Under no circumstances should they be exposed to any form of water or moisture. If you use water (eg. a wet cloth) to clean the casing, the coating may be eroded and the protection for the product will be diminished.Do not use a wet cloth to clean the main switch or the remote control overlay. This may result in malfunction. Do NOT use cleaning solvents and abrasive cleanersUnder no circumstances should you use any cleaning agents, like benzene or thinner to clean the product. Do NOT attempt to repair your productFor safety reasons, under no circumstances should you attempt to repair the product. If you suspect a malfunction, always call the OSIM Service Center for further assistance and information.OS-158 uCrown3 OP Eng Rev00 - Path.indd 12 1/11/2016 3:59:55 PM
13If you encounter problems with the operation of the uCrown 3, please check the following points for rectification. If the problem persists, please switch off the uCrown 3 and remove the batteries from the battery compartment. Contact the OSIM Service Center* for servicing.Do not dismantle or attempt to repair the uCrown 3 yourself. Doing so will void the warranty and OSIM will not bear any responsibility for any subsequent consequences.Possible causes/ActionProblem• The uCrown 3 will not start.* Please visit us at www.OSIM.com for information on the nearest service center. Product warranty is valid only in the country of purchase.Troubleshooting• Check and replace with new batteries if power is weak.• Ensure the polarities of batteries are correct.• Ensure the batteries are firmly affixed in the battery compartment.• The sound is the result of the mechanical structure and is not a malfunction.• The head unit may have entered sleep mode after 3 minutes of inactivity. Turn ‘Off’ the main switch and ‘On’ again to reset the uCrown 3.• The auto timer function of 10 minutes may have lapsed. • Check and replace with new batteries if power is weak.• Check that the earphones are properly inserted into the earphone jack.• The music may be in mute or the volume is at the minimal level. Press the [ ] button to increase the sound level.• The massage programs cannot be selected.• The massage stops midway.• No sound can be heard from earphones or speakers.• Motor sound during operation.OS-158 uCrown3 OP Eng Rev00 - Path.indd 13 1/11/2016 3:59:55 PM
14OS-158 uCrown3 OP Eng Rev00 - Path.indd 14 1/11/2016 3:59:55 PM
15NotesOS-158 uCrown3 OP Eng Rev00 - Path.indd 15 1/11/2016 3:59:55 PM
16NotesOS-158 uCrown3 OP Eng Rev00 - Path.indd 16 1/11/2016 3:59:55 PM

Navigation menu