OSIM OS-322 BT Module for Data Transfer User Manual Specifications of OS322 BT PCBA 1 June 26 2012
OSIM INTERNATIONAL LTD BT Module for Data Transfer Specifications of OS322 BT PCBA 1 June 26 2012
OSIM >
ARG-OS-322_User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1742965 |
| Application ID | Htrf9bo8FRzjDMVha0WR1w== |
| Document Description | ARG-OS-322_User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.13kB (339127 bits) |
| Date Submitted | 2012-07-13 00:00:00 |
| Date Available | 2012-07-16 00:00:00 |
| Creation Date | 2012-06-26 10:58:01 |
| Producing Software | GPL Ghostscript 9.05 |
| Document Lastmod | 2012-06-26 15:31:29 |
| Document Title | Specifications of OS322 BT PCBA 1 (June 26, 2012) |
| Document Creator | PDFCreator Version 1.3.2 |
| Document Author: | kit.chan |
Specifications of OS-322 MCU Board (Preliminary) HARDWARE Specifications Frequency Band: Support for 802.11 co-existence 2.4GHz ~ 2.48GHz unlicensed band Bluetooth System: v2.1 (Class 2) Antenna: Class 2 power output with printed PCB antenna Power: 3.3V from uSqueez App Power PCBA (2.7V to 3.6V) RF: 1Mbps GFSK. Interfaces : 7 connectors – Limit Safety Switch: A safety limit switch will be connecting to CN9. The safety limit switch is normally close (GND) and makes the uSqueez App working normally. If the safety limit switch is opened (Pull-high), the motors in uSqueez App will stop immediately and output beep sound twice. Optical Sensor: The optical sensor is used to detect the wide and narrow position. It will be connected to CN7. Operating: Temperature Range 0 - 70°C Dimensions: 80mm x 43mm x 8.6mm Indicators: 8 LEDs (on Button PCBs) – Power On/OFF (Color Red) Vibration Hi (Color Red) Vibration Lo (Color Red) Soothe of Auto Mode (Color Red) Pulse of Auto Mode (Color Red) Energize of Auto Mode (Color Red) CN1 – 5 pins (1 x 5 connector 2.0mm pitch) CN7 – 3 pins (1 x 3 connector 2.50mm pitch) CN9 – 2 pins (1 x 2 connector 2.50mm pitch) CN12 – 9 pins (1 x 9 connector 2.0mm pitch) ISO3 – 7 pins, 2.54mm (1 x 7 connector 2.50mm pitch) J1 – 6pins (1 x 6 connector 2.54mm pitch) J4 – 7 pins, 2.0mm (1 x 7 connector 2.0mm pitch) Specifications of OS-322 MCU Board (Preliminary) Buttons: Current consumption: Bluetooth power indictor (Color Red) BT connection status (Color Blue) 4 buttons (on Button PCBs) – Power On/OFF Vibration Hi/Lo Auto Mode Bluetooth button 50mA (approx.) Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Information for the OEMS Integrators This device is intended for OEM integrators only. Please see the full grant of equipment document for restrictions. Label Information to the End User by the OEM or Integrators If the FCC ID of this module is not visible when it is installed inside another device, then the outside of the device into which the module is installed must be labelled with “Contains FCC ID: ARG-OS-322 and IC: 10142A-OS322”. Specifications of OS-322 MCU Board (Preliminary) MECHANICAL SIZE Specifications of OS-322 MCU Board (Preliminary) CONNECTOR PIN LAYOUT Connector Pin Signal Name Description CN1 (To Push Button PCB - BT) VDD_3V3 3.3V power for LED BT_LED1 Bluetooth LED1 enable / disable BT_LED2 Bluetooth LED2 enable / disable ADC1 Detect Push button according to input voltage level No button press : 0.28×VDD to VDD Bluetooth button: 0V to 0.28×VDD KEY_DET Push button press detect SENS_VDD 3.3V Power for Sensor OPT_IN Input signal from Optical Sensor GND Signal Ground CN9 (To Safety Limit Switch) SAFE_DET Safety Limit Switch detection input GND Signal Ground CN4 (To Button PCB - Function) VDD_3V3 3.3V power for LED M_DATA5 LED5 enable / disable M_DATA4 LED4 enable / disable M_DATA3 LED3 enable / disable M_DATA2 LED2 enable / disable M_DATA1 LED1 enable / disable M_DATA0 LED0 enable / disable ADC0 Detect Push button according to input voltage level No button press: 0.90×VDD to VDD Vibration button: 0.59×VDD to 0.90×VDD Power button : 0.28×VDD to 0.59×VDD Program button : 0V to 0.28×VDD KEY_DET Push button press detect VDD 3.3V Power supply from power board (2.7 to 3.6V) GND Signal Ground O_BUZZER Buzzer control signal to power board O_MOMI Massage motor control signal to power board O_VIB Vibration motor control signal to power board GND Signal Ground ZERO_CRS Zero cross signal from power board GND Signal Ground 3V3 Control Signal for MCU firmware upgrade PGM Control Signal for MCU firmware upgrade SDO Control Signal for MCU firmware upgrade RESET Control Signal for MCU firmware upgrade CN7 (To Optical Sensor) ISO3 (To Power PCBA) J4 Specifications of OS-322 MCU Board (Preliminary) J1 SDI Control Signal for MCU firmware upgrade SCK Control Signal for MCU firmware upgrade BT_3V3 Control Signal for BT module firmware upgrade MOSI Control Signal for BT module firmware upgrade MISO Control Signal for BT module firmware upgrade CSB Control Signal for BT module firmware upgrade CSK Control Signal for BT module firmware upgrade GND Signal Ground Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Author : kit.chan Create Date : 2012:06:26 10:58:01+08:00 Modify Date : 2012:06:26 15:31:29+08:00 Subject : XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : GPL Ghostscript 9.05 Keywords : Creator Tool : PDFCreator Version 1.3.2 Metadata Date : 2012:06:26 15:31:29+08:00 Document ID : uuid:408fdfca-c196-11e1-0000-b95f379612a0 Instance ID : uuid:14c165b3-bef5-4481-9c4b-a293cbd2a566 Format : application/pdf Title : Specifications of OS322 BT PCBA 1 (June 26, 2012) Creator : kit.chan Description : Description (x-repair) : Page Count : 5EXIF Metadata provided by EXIF.tools