Ohsung Electronics URCDMS100 Single-Zone Amplifier User Manual OCE 0099C Rev 01

Ohsung Electronics Co., Ltd. Single-Zone Amplifier OCE 0099C Rev 01

Updated user manual

DMS-100 Owner's Manual
DMS-100 Owner’s Manual ©2010 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manualmay be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc.UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPER-ATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this manual may be subject to change without priornotice.URC - Control the Experience is a registered trademark of Universal RemoteControl, Inc.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.Universal Remote Control,Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
Congratulations! 2Features and Benefits 3Parts Guide 3Front Panel Description 4System Features 5Rear Panel Description 6Federal Communication CommissionInterference Statement 10USA Limited Warranty Statement 11Specifications 13System Configuration for Internal LAN Network 14Europe Certificate Of Conformity 15TABLE OFCONTENTSPage 1
Page 2DMS-100 SINGLE ZONE AMPLIFIERCongratulations!You’ve purchased the finest music distribution system availabletoday. The DMS-100 is a native to the network, CD quality digitalmusic distribution system with an available range of keypads andremote controls that not only fully control your music but controlall of your other audio video components. The DMS-100 distributes music to your speakers and other DMScomponents in the system. This makes your system scalable, andeasy to add additional rooms at any time in the future. All you needis a DMS amplifier connected to the network to make any room anew DMS Music Room.The DMS-100 is designed for professional installation only.Your installer will help you select the right user interface for everyroom of your installation. You’ll have a choice of Total Control in-wall keypads and remote controls.If you have questions, call your installer:Company:Installer Name: Contact #: Email address:The customer service center is also available for any questionsyou may have. Contact us at:1-914-835-4484 or email us at: techsupport@universalremote.com
Page 3DMS-100 SINGLE ZONE AMPLIFIERFeatures and Benefits• One audio input streams to other Total Control amplifiers.• Preamp output for connection to local amplifier.• Scalable solution; install as an additional zone with aDMS-1200 system, or install multiple DMS-100s to createcustomized multi-zone system.• 50 Watts per channel amplifier for speakers.• Can be programmed off premises via the internet and MRX-10.Parts GuideThe DMS-100 Single Zone Amplifier includes:1 - DMS-100 Single Zone Amplifier 1 - Power Cord1 - Ethernet Cable 1 - Installation Manual
Page 4DMS-100 SINGLE ZONE AMPLIFIERFront Panel DescriptionPower and LAN LEDsLEDs indicate that the DMS-100 is connected to power and to the local area network. Automatic Power OffThe DMS-100 is powered off and is in an automatic stand by state when no zones are active. Reset ButtonThe front panel reset button offers the end user a quick way toreconnect the DMS-100 to the local area network.
Page 5DMS-100 SINGLE ZONE AMPLIFIERSystem FeaturesPristine Audio QualityUnlike other digital music systems, the DMS system streams all music uncompressed at pure CD quality levels. You enjoy all the detail of your original source.Room LinkingAny room can be linked with any other room to listen to the samesource. This makes it easy for you to entertain by simply linking allthe rooms your guests will be in and controlling the music from anyremote or keypad.ReliabilityThe DMS-100 is engineered first and foremost for reliability.It offers extensive internal protection against failure and is manufac-tured in our ISO 9000 certified factory with the utmost attention toquality control at every stage of manufacturing, from parts procure-ment to final assembly.
Page 6DMS-100 SINGLE ZONE AMPLIFIERRear Panel Description110V-220V Power ConnectionThe IEC power socket enables either UL/CSA approved 110V power cords or CE approved 220V power cables to be used with the DMS-100. The internal power supply automatically switches from 110V to 240V.Network ConnectionA 10/100 LAN connection ensures that the DMS-100 will receive all network streams from other DMS or SNP sources.IR In for 1-Way RF Remotes and Base StationsWhen connected to a URC RF base station, a one-way URC remote control can be programmed to control a zone.
Page 7DMS-100 SINGLE ZONE AMPLIFIERSystem FeaturesAnalog Audio InputConnect a music source to the DMS-100 to listen locally toan AV receiver.Preamp ZoneThe preamp zone enables use of external power amplifiers for a room with a need for more or less power than 50 watts per channel. SpeakersThe DMS-100 internal amplifier powers a pair of 8 ohm speakers with 50 watts per speaker. The speakers can deliver output from any DMS source.
Page 8Important Safety InstructionsThis unit shall be connected to a mains socket outlet with a protectivegrounded connection or equivalent.CAUTION: To completely disconnect this product from the mains, disconnect theplug from the wall socket outlet. The mains plug is used to completelyinterrupt the power supply to the unit and must be within easy accessby the user. CAUTION:These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other thanthat contained in the operating instructions unless you are qualified to doso or equivalent.IMPORTANT SAFETY INSTRUCTIONS
Page 9IMPORTANT SAFETY INSTRUCTIONSImportant Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. In the event of malfunction, un plug lmmediately.6. Do not use this apparatus near water.7. Clean only with dry cloth.8. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.9. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus(including amplifiers) that produce heat.10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.11. Protect the power cord from being walked on or pinched particularly atplugs, convenience receptacles, and the point where they exit from theapparatus.12. Only use attachments/accessories specified by the manufacturer.13. Use only with the cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.14. Unplug this apparatus during lightning storms or whenunused for long periods of time.15. Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has been spilled orobjects have fallen into the apparatus, the apparatus has been exposed torain or moisture, does not operate normally,or has been dropped.CAUTION: The ventilation should not be impeded by covering the ventilationopenings with items, such as newspapers, tablecloths, curtains,etc.No naked flame sources, such as lighted candles, should beplaced on the unit.Minimum distances around the apparatus for sufficientventilation : 20centimeterThis product is use in moderate climates.Do not expose the unit to dripping or splashing fluids, do notplace objects filled with liquids, such as vases, on the unit.
Page 10DMS-100 SINGLE ZONE AMPLIFIERFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a res-idential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
Page 11USA WARRANTYUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive remeies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such soft-ware is provided "AS IS" unless expressly provided for in anyenclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner's Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase is required. For product supportand other important information visit Universal Remote Control'swebsite: http://www.UniversalRemote.com or call the CustomerService Center (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called “B STOCK”or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludesproducts sold by unauthorized resellers.
Page 12USA WARRANTYLIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANYINCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ONTHIS PRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTECONTROL BE LIABLE, WHETHER IN CONTRACT OR IN TORT(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THEPURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFT-WARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CON-SEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUEOR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION ORDATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIALLOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITYOR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFT-WARE TO THE FULL EXTENT THESE DAMAGES MAY BE DIS-CLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNI-VERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLEFOR STATEMENTS MADE BY OTHERS CONCERNING THE MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT. Some states or jurisdictions do not allow theexclusion or limitation of incidental or consequential damages, orallow limitations on how long an implied warranty lasts, so theabove limitations or exclusions may not apply to you. This LimitedWarranty gives you specific legal rights and you may have otherrights which vary from state to state or jurisdiction to jurisdiction.REV020708
Page 15EUROPE CERTIFICATE OFCONFORMITYEurope Certificate Of ConformityUniversal Remote Control, Inc. declares that this product complies withthe requirements CE/LVD (Low Voltage Directive, 2006/95/EC).Certificated Attestation of compliance “E8N 10 10 75224 001”is issuedaccording to the Directive 2004/108/EC relating to electromagneticcompatibility on a voluntary basis and is in compliance with the corre-sponding technical standards such as EN55013, EN55020, EN55022,EN55024/A2, EN61000-3-2, EN61000-3-3 and EN60065 A/V. A copyof the full Certificate of Conformance may be obtained at “http://www.universalremote.com”
Page 16NOTE
OCE-0099C Rev 01

Navigation menu