Ohsung Electronics URCHSR200 Wireless Remote Controller User Manual H User s Manual

Ohsung Electronics Co., Ltd. Wireless Remote Controller H User s Manual

User Manual

Order Number : GETEC-C1-16-468 FCC Part 15 subpart C Test Report Number : GETEC-E3-16-062 Page 1 / 1 EUT Type: RF Remote Controller FCC ID.: OZ5URCHSR200 APPENDIX H : USER’S MANUAL
HS-R200Owner’s ManualUniversal Remote Control, Inc.www.UniversalRemote.com
R200 Owner’s ManualWelcome!Welcome to the world of HomeSet control and automation. Thank you foryour purchase. Before operating the unit, please read this manualthoroughly, observe all safety precautions, and retain it for your future use.Online Help:http://www.homesethome.com/support-manuals/#manualsFor downloads and frequently asked questions.Contact Support:HomeSet is a URC product sold through Authorized Dealers and locationthroughout the USA. For questions or assistance, contact your CustomInstaller/Programmer (write in Company Name, Email & Contact Info):or Tech Support at: techsupport@universalremote.comHomeSet/URC500 Mamaroneck Ave., Harrison, NY 10528Toll Free: (800) 901-0800Main: (914) 835-4484
R200 Owner’s ManualImportant Information andSafety PrecautionsHomeSet R200 Owner’s Manual© 2016 Universal Remote Control, Inc. All rights reserved. Theinformation in this manual is copyright protected. No part of thismanual may be reproduced in any form without written consent fromUniversal Remote Control.Universal Remote Control SHALL NOT BE LIABLE FOR OPERATIONAL,TECHNICAL OR EDITORIAL ERRORS/ OMISSIONS MADE IN THISMANUAL.This book is intended for use by the homeowner/system user and alsocontains setup information for the system custom installer andprogrammer. For system installers/programmers, we also offeradditional manuals. The information in this manual is subject to changewithout notice. Features may vary between customized software andURC releases. Contact your custom installation professional withquestions.URC, HomeSet and Control the Experience are trademarks of UniversalRemote Control, Inc. All other brand or product names are trademarksof their respective companies or owners.Safety PrecautionsFor your safety, do not attempt to disassemble the R200 RemoteControl. There are no user-serviceable parts inside. Use only the microUSB charger and rechargeable lithium polymer battery supplied withthe unit or proper replacement batteries. Do not expose for extendedperiods of time to excessive heat, moisture or direct sunlight. Cleanonly with a soft, dry cloth. Changing the physical location of this unit toa place other than where originally installed may negatively affectperformance.About Rechargeable Lithium Polymer BatteriesIf you will not be using your remote for an extended period of time,remove the battery. Do not attempt to disassemble, puncture, alter orapply heat to the battery. Use care to avoid dropping battery orsubjecting it to severe impact that could damage the case. Batteryshould not be immersed in water. Risk of explosion if battery isreplaced by an incorrect type. Please recycle depleted batteries. LithiumPolymer Batteries are recyclable. For the address of a recycle drop-offlocation near you call toll free 1-800-822-8837 or visithttp://www.rbrc.com.
R200 Owner’s ManualIntroductionYour HomeSet R200 Remote Control works with the HomeSetC200 Control Hub for easy, handheld control, and automation ofelectronic components in your home (audio/video and homeentertainment devices such as lights, thermostats, securitysystems, and more) to make life more enjoyable. The R200 is awireless remote that is installed as part of a HomeSet system byyour smart home professional.The R200 is a Wi-Fi based Remote and does not use “line of sight”infrared (IR) or low frequency RF. It’s the perfect accessorycompanion for your TV room or bedroom.
R200 Remote ControlBy using the R200, you gain two-way control of you connecteddevices. “Two-way” means that in addition to data being sent toan electronic component (such as a Nest Thermostat), data I alsoreturned to your remote so you can see graphical information ofcurrent status, including the current temperature in the home andmore. Adding the HomeSet Mobile App for Android™ and iOSdevices provides the same two-way feature.R200 Owner’s Manual
R200 Owner’s ManualFeatures and BenefitsEnjoy the following features:●Quick Connect Wi-Fi When picked up, the R200 connects to Wi-Fi within moments to control your home Audio/Video (A/V) systems and smart home devices.●Control Smart Home Products with Ease HomeSet R200 provides an elegant way to control entertainment products plus smart home devices in and around your home. For example, you can check on the kids in the backyard and turn on outside lights at dusk from your remote. Or switch the TV to your Blu-ray player and start a favorite movie with one button press.●Two-way metadata feedback Experience two-way feedback on your R200’s remote screen when used with compatible home devices such as entertainment, lights, and more. Two-way control of Nest is available on the R200 remote and via the HomeSet’s mobile apps. Enjoy the same feedback when used in conjunction with a regularly-expanding line of products made by other manufactures.●Pick-up Sensor Lifting the remote immediately wakes it up, turns on the backlight, the LCD screen, and quickly connects to the local Wi-Fi for control of your smart home system.●Rechargeable Lithium Polymer Battery Save money and protect the environment by using the included micro USB charger and rechargeable lithium polymer battery.
R200 Owner’s ManualWhat’s Included in the BoxThe following are the parts and pieces of the R200 remote:1. R200 Remote Control2. AC Power Adapter3. Rechargeable Lithium Polymer Battery
R200 Owner’s ManualNoticeBefore Getting StartedKeep in mind the following:●Designed for use on your local wireless network The HomeSet R200 Remote Control is designed for use on your wireless network similar to how your phone, tablets, or computers work. Used in conjunction with a HomeSet C200 Base Station, the R200 can also control your home’s A/V devices. By using a local wireless network connection, the R200 can control your system without being in line-of-sight of the equipment by sending commands over your home network.●Programmable via a web page interface by an authorizedprogrammer To fully automate your home entertainment, comfort, and security system you professional programmer will gather knowledge of devices in your home and settings on your local Ethernet network in order to get things ready for your installation. They’ll then use HomeSet’s web-based programming software to download and save your system file on HomeSet’s server.
R200 Owner’s ManualNoticeTo Get Started Installing●Inserting the Lithium Polymer Battery Press the spring lock down to unlock and remove the battery cover. A battery is included in the box. Place the battery into the battery compartment, making sure to align the contacts on the battery to the contacts on the R200. The battery snaps into place when aligned properly. Replace the cover.●Using the Micro USB Charger Plug the micro USB charger into a power outlet and into the bottom of the R200 Remote. There is no harm in leaving the R200 plugged in and charging when it is not in use.●Communication via Wi-Fi To use the R200 with any companion product that can communicate in a two-way fashion, it must be configured to be part of a Local Area Network (LAN) via a Wi-Fi b/g/n access point or router.
R200 Owner’s ManualSetup and Using the R200The R200 Remote’s Home Menu pages have buttons that allow you tonavigate menus to perform setup of HomeSet and the R200 Remote. Whilethis section goes into the Professional Installer’s setup, many of the samebuttons are used for daily operation.The Home Menu pages display activities and devices in the system. Press theHome page button to view activities and devices. Navigate the home page byusing the Up and Down navigation buttons. Press any button adjacent to thescreen to select an activity or device. Press Home to return to that page and toselect a new device or activity.The Volume and Mutebuttons are always availableregardless of what screen isdisplayed.The Home buttonalways displays theHome menu pages.The Up and Downbuttons are used tonavigate through amenu screen.
R200 Owner’s ManualDisplaying the Settings ScreenEnter the Settings menu by pressing and holding the Home andEnter (ENT) buttons for three seconds. Use the Up and Downnavigation buttons to navigate between the Settings Items. To select, press the button on the side of the LCD screen or the Select button when a line item is highlighted. To go back a step or to get out of the Settings menu, press the Home button.Shown below is the expanded view of R200 Settings Menu, showing all available Setup Menu options.Note: Up and Downnavigationbuttons revealthe entire liston the Settingsscreen.
R200 Owner’s ManualThe screen displays network information about your R200 and thewireless network where it is connected. In this screen you’re ableto scan for Wi-Fi network, select a network to connect to andenter any custom settings required.After connecting the HomeSet C200 Control Hub to the localnetwork, select the “Base Station” (see below) setup item whichresults in display of the available C200 Hubs within the home. C200Hubs (Base Stations) are identified by their MAC Address, which isdisplayed on a sticker on the hub.Selecting a C200 Hub results in the display of a screen that allowsthe viewing and setting of custom Base Station network properties.
Your HomeSet system also includes the ability to add an optionalURC TRF-ZW Z-Wave Gateway. This enables control of Z-Waveenabled products such as lights, thermostats, door locks, and more. Ifthis is included in the system, there is a user accessory accountsetup that will be performed by your installer as shown here.Accessory Account info item allows the entry of an TRF-ZW Z-Waveaccount username and password. The R200 provides a two-wayinterface to these devices over the local wireless Ethernet network(as seen below left).Contact your dealer or installer to acquire Z-Wave smart homeproducts to use with your R200 Remote.R200 Owner’s Manual
R200 Owner’s Manual You can adjust the amount of time the LCD remains ON when the remote is not in use. The time can be set independently base on whether the remote is using battery power or connected to the Micro USB Charger.Selecting an item on this screen allows for the setting of each Sleep Timer value. Once the Sleep Timers are adjusted, press the Save button. Pressing the Go Back button reverts to the remote control’s last saved setting.
R200 Owner’s Manual Selecting Brightness results in the display of a screen that allows for setting brightness of the R200’s LCD Screen. Adjust screen brightness by pressing the adjacent hard buttons to increase or decrease the brightness level. Once the brightness is adjusted, press the Save button. Pressing the Go Back button reverts to the remote’s last saved settings. Note: The System Information screen displays data about your R200’sOperating System and Memory, along with other information.Press More button to view further system information. Pressing GoBack exits to the remote’s Settings Menu.
R200 Owner’s Manual You can adjust the brightness of the LEDs that backlight the LCD screen buttons of the R200. This can save R200 power. Press the adjacent hard buttons to increase/decrease button light level. Once the LCD screen button light is adjusted, press . Pressing the button reverts the remote’s last saved setting.You can display the remaining battery level by selecting Power.You can also adjust when the Low Battery warning screen appears.Once power is adjusted, press . Pressing reverts to theremote’s last saved setting.
R200 Owner’s Manual You can adjust button sounds of the R200. Press the adjacent hard buttons to increase/decrease button volume level. Once sound is adjusted, press Save. Pressing Go Back reverts to the remote’s last saved settings.You can set the R200 to turn on when the remote is picked up.Simply select , , or (Turn ON) or . After Pickup hasbeen adjusted, the System Menu is displayed again.
R200 Owner’s Manual Selecting Firmware Update results in display of a screen that checks for a firmware update for the R200 Remote and C200 Hub (if necessary). If a firmware update is available, the below screen is displayed. Selecting Yes starts the firmware update process. Selecting No results in display of the R200 System Menu. If a firmware update is not available, the screen below displays.
R200 Owner’s ManualFactory Default WARNING! Selecting this button resets the memory of theHS-R200 to factory settings. SelectingYes sets the R200 to factory default. Selecting No returns the R200 to the Setup Menu screen.ExitWhen you’ve finished adjusting Settings, simply press Exit to return tonormal operation.
R200 Owner’s ManualPlease refer to the URC complete Limited Warranty:www.HomeSetHome.com/limited-warranty-statement/This Limited Warranty is valid only in the United States of America.Any URC/HomeSet equipment that is purchased from an unauthorizedsource will not be eligible for:a) Tech Support or support of any kind from URC/HomeSetb) Any warranty by URC/HomeSet
R200 Owner’s Manual●Size: 8.74” H x 2.087” W x 0.984” D●Weight: 6.1 oz● LCD: 2 inch Screen (240 by 320) LCD Backlighting by LED●Devices: Supports up to 255 Devices with text less with heavygraphics●Usage Pages: Supports up to 255 Pages on each Device with text,less with heavy graphics usage●Macro Capability: Up to 255 steps each, however, nesting isallowed●Wi-Fi: IEEE 802.11 b/g/n●Battery: Lithium Polymer, 1,960mAh●Battery Charging Time: 5 hoursHomeSet features and hardware may be updated from time totime. Manual HomeSet software and / or hardware updatesshould only be performed by your authorized HomeSet installer/programmer. Features may vary between customized softwareand URC software releases. To find out more, please contact yourcustom installation professional with questions. All information,features, benefits and user screens are subject to change withoutnotice.Terms and conditions of the End User Agreement available at:www.UniversalRemote.com/end-user-agreement/ apply.This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmfulinterference to radio or television reception, which can bedetermined by turning the equipment off and on, the user isencouraged to try to correct the interference by one more of thefollowing measures:●Reorient or relocate the receiving antenna.●Increase separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.●Consult your dealer/installer or an experienced radio/TVtechnician for help.
R200 Owner’s ManualChanges/modifications not expressly approved by URC could voiduser’s authority to operate the equipment. URC is not responsiblefor any Radio or TV interference caused by unauthorizedmodifications to this equipment. Such modifications could voidthe user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation. Any changes or modifications not expresslyapproved by the party responsible for compliance could void theauthority to operate equipment. The antenna(s) used for thistransmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter.Radiation Exposure StatementThis Equipment complies with FCC radiation exposure limits set forth for an uncontrolled enviroment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portatble exposure condition without restriction.

Navigation menu