Ohsung Electronics URCKP4000 NETWORK KEYPAD User Manual User s Manual G

Ohsung Electronics Co., Ltd. NETWORK KEYPAD User s Manual G

Users Manual

Order Number : GETEC-C1-09-215 FCC Class B Certification Test Report Number : GETEC-E3-09-130 Page 1 / 1 EUT Type: Network Keypad FCC ID.: OZ5URCKP4000 APPENDIX G : USER’S MANUAL
KP-4000 Owner’s ManualNetwork Keypad™Universal Remote Control®
KP-4000 Owner’s Manual ©2009 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this man-ual may be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc.UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPER-ATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this manual may be subject to change without priornotice.Complete Control is a registered trademark of Universal Remote Control,Inc.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSIntroduction 1Features and Benefits 2Parts Guide 2Network Installation and Control 3Frequently Asked Questions 4Specifications 4USA Limited Warranty Statement 5Information to the User 6Warning 6
Page 1KP-4000 NETWORK KEYPADIntroductionThe KP-4000 is a Network Keypad. MAC addressing gives you theability to use an unlimited amount of KP-4000’s and allows the con-trol of many identical components as needed throughout the house. 3. Self-adhesive “Flashers” affixto the Infrared sensors on thefront panels of your client’scomponents. The Flashersrelay commands to compo-nents. The flashers plug in tothe KP-4000 rear flasher lineoutputs via their 10 footcables. The KP-4000 can alsoconnect to components withrear panel IR Inputs via itsadjustable IR Line Outputs.2. The MRX-1 receives commandsfrom the Network via a WiFirouter /WAP; or over an optionalRFX-250 or RFX-250i. 1. The KP-4000 communicates over a POE (Power Over Ethernet)network switch or directly to URC Lighting over a RFTX-1. IR over RFRFX-250 (or RFX-250i) WiFi RouterIR Controlled Device
Page 2KP-4000 NETWORK KEYPADFeatures and Benefits2-Way IP and RS-232 Thermostats, Security Systems, HomeTheater AVRS and Multi-Zone MatrixesVia the unique URC 2-Way database installers can drag and drop2-Way pre-programmed modules into a KP-4000 for matrix pre-amps, multi-zone receivers, alarm and fire systems with either IP orvia the MRX-1, RS-232 control. Prebuilt modules for IPThermostats, appliances and security systems natively for the KP-4000. IP Camera Modules for SurveillanceUser can select from up to six views displayed on one page. Oncethe camera is selected, the image fills the screen. Pan, tilt, zoomcameras are supported with on screen controls. If the user hasmore than one camera, the KP-4000 can sequence plyaback eachcamera with installer set delays between cameras and cameranames displayed. Whole House URC Lighting via RFTX-1Via the RFTX-1 transmitter, the KP-4000 and can relay commandsaround the house, creating whole house lighting scenes and paths. Control Devices with Relays and Utilize MRX-1 Sensor Port toAutomate TOAD IR DevicesThe MRX-1 offers KP-4000 important capabilities for legacydevices. It is equipped with a sensor port compatible with MSC-400 video or voltage sensors and a NO, NC or Momentary set ofcontacts. LAN Programming (No USB Needed)The Kp-4000 can be installed and configured completely iva theNetwork and, should you have secure access to the client’s networkremotely, can be completely reprogrammed from teh comfort of youroffice. Parts GuideThe KP-4000 Network Keypad includes:1 - KP-4000 Network Base Station1 - 12V-1000mA Power Supply1 - Mounting Plate for wall mountingthe MRX-1
Page 3Network Installation and Control1. Connect the Ethernet cable (RJ45) to the rear of the KP-4000 andinto the rear of the network router.2. Open the CCP editor.3. Select Program then Configure Home.4. Add a KP-4000 Network Keypad and the properties windowopens. 5. Select a Base Station to communicate with the KP-4000.6. Within the Network Information field, the ‘Obtain and IP addressAutomatically’ option should be checked or type in a designatedStatic IP. KP-4000 NETWORK KEYPADThe KP-4000 is a network keypad that communicates to a MRX-1base station and allows full control of your components. Onceinstalled to the network, a button press from the remote will send acommand over POE (power over ethernet)to the MRX-1which sendsIR, RS232 or Relay commands to the devices you specify.
Page 4KP-4000 NETWORK KEYPADFrequently Asked QuestionsI’m getting inconsistent operation regardless of flasher level orposition.Some components are easily overloaded with IR from nearby flash-ers. Prevent IR from affecting the problem component from otherflashers by setting the device to a specific IR Line Output instead ofALL, then adjust the Line Output.I am unable to control my URC Lighting Dimmer/Switch with theKP-4000. Now what?Make sure the RF switch on the RFTX-1 is set to the correct fre-quency for the URC Dimmer or Switch. URC Lighting ModelsMRFA is 418MHz and MRFB is 433MHz.How do I update the firmware?Make sure the KP-4000 is connected to the Network then openCCP and click on the Firmware button located within theCommunications tab. How can I set my KP-4000 to factory default?Remove the front cover of the KP-4000. Use a pen or pointy deviceto depress the button and reset the unit. SpecificationsMicroprocessor: 190MHz RISCMemory: 64 Megabytes of RAM (for User Configuration)Devices: Supports up to 255 DevicesPages: Supports up to 255 Pages on each DeviceMacro Capability: Up to 255 steps each, however nesting isallowedNetwork: One 10/100 Ethernet portWeight: 9.84 oz.Size: 5.75” x 4.7” x 1.8”Power : DC12V, 1A or Use PoE Power
Page 5USA Limited Warranty StatementYour Universal Remote Control, when delivered to you in newcondition, is warranted against defects in materials or work-manship as follows: UNIVERSAL REMOTE CONTROL, INC.warrants this product against defects in material or workman-ship for a period of one (1) year and as set forth below.Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange theproduct for a comparable new or rebuilt product. In the eventof a defect, these are your exclusive remedies.This Limited Warranty covers only the hardware componentspackaged with the Product. It does not cover technical assis-tance for hardware or software usage and it does not cover anysoftware products whether or not contained in the Product; anysuch software is provided "AS IS" unless expressly provided forin any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product,freight prepaid, in its original packaging or packaging affordingadequate protection to Universal Remote Control at the addressprovided in the Owner's Manual. It is your responsibility tobackup any macro programming, artwork, software or othermaterials that may have been programmed into your unit. It islikely that such data, software, or other materials will be lostduring service and Universal Remote Control will not beresponsible for any such damage or loss. A dated purchasereceipt, Bill of Sale, Installation Contract or other verifiableProof of Purchase is required. For product support and otherimportant information visit Universal Remote Control's website:http://www.UniversalRemoteControl.com or call the UniversalRemote Control Customer Service Center (914) 835-4484. This Limited Warranty only covers product issues caused bydefects in material or workmanship during ordinary consumeruse. It does not cover product issues caused by any other rea-son, including but not limited to product issues due to commer-cial use, acts of God, third-party installation, misuse, limita-tions of technology, or modification of or to any part of theUniversal Remote Control product. This Limited Warranty doesnot cover Universal Remote Control products sold as USED, ASIS, REFURBISHED, so-called "B STOCK" or consumables (suchas batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from theproduct. This Limited Warranty is valid only in the United Statesof America. This Limited Warranty specifically excludes prod-ucts sold by unauthorized resellers.KP-4000 NETWORK KEYPAD
Page 15KP-4000Federal Communication Commission InterferenceStatementThis equipment has been tested and found to comply with the limits for a Class B dig-ital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interfer-ence to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one moreof the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning!Changes or modifications not expressly approved by the manufacturer could void theuser's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user'sauthority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.Any changes or modifications not expressly approved by the party responsible for com-pliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
Page 6This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interfer-ence to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does causeharmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by onemore of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment andreceiver.Connect the equipment into an outlet on a circuit dif-ferent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV techni-cian for help.WarningChanges or modifications not expressly approved by the manu-facturer could void the user's authority to operate the equip-ment.Note : The manufacturer is not responsible for any Radio or TVinterference caused by unauthorized modifications to thisequipment. Such modifications could void the user's authorityto operate the equipment.Information To The User
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com™Universal Remote Control®

Navigation menu