Ohsung Electronics URCMRX10 Network Base Station User Manual H Users manual

Ohsung Electronics Co., Ltd. Network Base Station H Users manual

User Manual

Order Number : GETEC-C1-10-181 FCC Part 15 subpart C Test Report Number : GETEC-E3-10-093 Page 1 / 1 EUT Type: RF Remote Controller FCC ID.: OZ5URCMRX10 APPENDIX H : USER’S MANUAL
MRX-10 Owners ManualAdvanced Network ystemController
MRX-10 Owners Manual ©2010 Universal Remote Control,Inc.The information in this manual is copyright protected.No part of this man-ualmay be copied or reproduced in any form without prior written consentfromUniversal Remote Control,Inc.UNIVERSAL REMOTE CONTROL,INC.SHALL NOT BE LIABLE FOR OPER-ATIONAL,TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this manual may be subject to change without priornotice.Complete Control is a registered trademark of Universal Remote Control,Inc.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.Universal Remote Control,Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
THEDIGITALMULTIZONEAMPLIFIERIntroduction 1Features and Benefits 1Parts Guide 1Front and Rear Panel Descriptions 2Specifications 4USA Limited Warranty Statement 9Federal Communication CommissionInterference Statement 10Regulatory Information to the user 11Declaration of Conformity 12
Page 1MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERIntroductionThe MRX-10 Advanced Network System Controller controls allMRX series connected devices throughout the entire home. Press abutton on a Total Control remote or keypad to issue a commandfrom the MRX-10 to turn off the lights in every room all whilewatching a movie. View the artist name, song title and album artyour child is listening to in their room from a Total Control remoteor keypad. Also control whole house music from sources such as aDMS-1200, DMS-100, SNP-1 and a PSX-2. Features and BenefitsStores and issues commands and macros for all IP, IR, RS-232, Relay, Sensor and 12V controlled devices to MRX seriesbase stations in one systemProvides 2-Way communication with Total Control remotesand keypadsControl URC Lighting with an optional RFTX-1 RF TransmitterCan be programmed off premises via the internetEasy rack-mounting via optional RMK-1 rack mounting kit.Parts GuideThe MRX-10 Advanced Network System Controller includes:1 - MRX-10 Network System 1 - Ethernet Cable1 - AC Power Adapter 8 - IR Emitters with standard 3.5mm1 - Power Cord plugs1 - Adjustment Tool 1 - InstallationManual
Page 2MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERFront and Rear Panel DescriptionsFront PanelThe front panel consists of 2 indicator lights which will illuminatewhen in use.Power LED: Indicates that the MRX-10 is powered on when lit. Ethernet LED:Indicates the network connectivity status of the MRX-10. On=Connected, Off=not connected. Total Control Illumination: Attractive, adjustable accent lighting. Reset: Press for one second and release to reboot the MRX-10.Power LED ResetEthernet LED Total Control llumination
Page 3MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERRear PanelThe rear panel ports are:DC 12V Power: Attach the included 12V DC 3.5A power supplyhere. LAN Connection: RJ45 standard 10/100 Ethernet connection to thelocal network. URC USB Port: USB port for future expansionIROutputs: Eight standard 3.5mm IR emitter ports with individualoutput level adjustment screws. Relays NO, NC, COM: Two programmable relays to be normallyopened (NO), normally closed (NC) or momentary contacts. Anapplication should be less than 30V/.5A. Sensors: Four sensor ports allow programming of state dependentand triggered macros. Compatible with URCVideo (URC part: VID)and voltage (URC part: VS-100) sensors. 12V OUT: Two programmable 12V/0.2A outputs. Each may be pro-grammed to turn on, off or momentarily toggle its output.RS-232: Four RS-232 ports support Tx(Transmit), Rx(Receive) and GND(Ground) connections for two way communication.Compatible with URC cables RS232F and RS232M.Trigger In: IR and RFtrigger input ports allow integration with othercontrol systems and remotes.RFTX-1: Attach an optional RFTX-1 transmitter to control URCLighting products via 418MHz or 433.92MHz wireless RF.DC 12VPowerURCUSBRelay:NO,NC, COM12V Out Trigger InRFTX-1RS-232PortsSensorsIROutputs: #1-8LAN
Page 4MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERSpecificationsInput & Outputs:12V/.2A: Two (Programmable)IR: Eight adjustable outputUSB: One (for future use)Ethernet: One 10/100 RJ45 port (Indicator 2LED)RS-232: Four, supporting TX, RX and GND. Sensor: Four, supporting Video or Voltage sensing (requires URC sensors).Relays: NO, NC or COMRF:Frequency: 2.4GHz (for MS-780)Range: 50 to 100 feet, depending upon the environmentPower Supply: 12v DC 3.5A External Power SupplySize: 1.7" x 17" x 8.7" (H X W x DWeight: 4.5 lbs. (2.05 Kg)
Page 5MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in newcondition, is warranted against defects in materials or work-manship as follows: UNIVERSAL REMOTE CONTROL, INC.warrants this product against defects in material or workman-ship for a period of one (1) year and as set forth below.Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange theproduct for a comparable new or rebuilt product. In the eventof a defect, these are your exclusive remedies.This Limited Warranty covers only the hardware componentspackaged with the Product. It does not cover technical assis-tance for hardware or software usage and it does not cover anysoftware products whether or not contained in the Product; anysuch software is provided "AS IS" unless expressly provided forin any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product,freight prepaid, in its original packaging or packaging affordingadequate protection to Universal Remote Control at the addressprovided in the Owner's Manual. It is your responsibility tobackup any macro programming, artwork, software or othermaterials that may have been programmed into your unit. It islikely that such data, software, or other materials will be lostduring service and Universal Remote Control will not beresponsible for any such damage or loss. A dated purchasereceipt, Bill of Sale, Installation Contract or other verifiableProof of Purchase is required. For product support and otherimportant information visit Universal Remote Control's website:http://www.UniversalRemoteControl.com or call the UniversalRemote Control Customer Service Center (914) 835-4484. This Limited Warranty only covers product issues caused bydefects in material or workmanship during ordinary consumeruse. It does not cover product issues caused by any other rea-son, including but not limited to product issues due to commer-cial use, acts of God, third-party installation, misuse, limita-tions of technology, or modification of or to any part of theUniversal Remote Control product. This Limited Warranty doesnot cover Universal Remote Control products sold as USED, ASIS, REFURBISHED, so-called "B STOCK" or consumables (suchas batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from theproduct. This Limited Warranty is valid only in the United Statesof America. This Limited Warranty specifically excludes prod-ucts sold by unauthorized resellers.
Page 6MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a res-idential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television recep-tion, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one more of the followingmeasures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.Federal Communication Commission (FCC) Radiation Exposure StatementThe device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm or more from a person's body. Other operating configurations should be avoided.
Page 7MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERRegulatory Information to the userCE conformity NoticeProducts with “CE” marking comply with the R&TTE Directive1995/5/EC, EMC Directive 2004/108/EC and Low VoltageDirective 2006/95/EEC issued by the commission of the EuropeanCommunity.1) R&TTE DirectiveLVD : EN 60950-1EMC : ETSI EN 301 489-1,3RF : ETSI EN 300 220-1,2: ETSI EN 3002) EMC DirectiveEmission : EN 55022Immunity : EN 55024Power : EN-61000-3-2, 3Safety instruction for charging internal rechargeable battery ofremote control CautionUse only with EN60950-1 approved as Limited power source anddouble insulation( ) marked power adaptor & same ratingsdescribed on the product label (12Vdc,3.5A). Declaration of Conformity“Hereby, Universal Remote Control Inc. declares that this MRX-10 isin compliance with the Essential requirements and other relevant pro-visions of Directive 1999/5/EC.”CertificationType No.(Model No.) MRX-10Batch/Serial No. -Power Rating 12V 3.5AFrequency band 2.45GHz (ZigBee-Pro)
Page 8MRX-10 ADVANCEDNETWORKSYSTEMCONTROLLERDeclaration of ConformityCompany Name : Universal Remote Control Inc.Company Address : 500Mamaroneck Avenue, Harrison, NY 10528, U.S.AContact Info rmation : www.universalremote.comPhone: (914)835-4484 Fax: (914)835-4532Brand Name : UNIVERSAL remote controlProduct Name : NETWORK BASE STATIONModel Name : MRX-10This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued bythe Commission of the European CommunityCompliance with these directives implies conformity to the following European Community EMC Directive EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 R&TTE Directive EN 60950-1 ETSI EN 301-489-1,3 ETSI EN 300 220-1,2 ETSI EN 300 List of test reports and/or certificate verified compliance with the standards aboveDate of issue : November 30, 2010Name and signature of authorized person : EMC Directive Report No. Testi ng Labora tory : Gumi College EMC Center R&TTE Directive Certificate No. Certificate Body : TUV Rheinland (No. 0197)James NovakSenior Product ManagerUniversal Remote Control Inc.
OCE-0000A Rev 01

Navigation menu