Ohsung Electronics URCMX1200 RF Remote Controller User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. RF Remote Controller EMISSION TEST REPORT

Users Mnual

G Order Number : GETEC-C1-11-132 FCC Part 15 subpart C Test Report Number : GETEC-E3-11-056 Page 1 / 1 EUT Type: RF REMOTE CONTROLLER FCC ID.: OZ5URCMX1200 APPENDIX I : USER’S MANUAL G
MX-1200 Color Touch screenOwner’s Manual
MX-1200 COLOR TOUCH SCREEN500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 This remote control was Custom Programmed for you by:For questions about your Custom Programming call:Custom Programming of a complex home theater and/or a multi-roomsystem is one of the most challenging tasks within an audio/videoinstallation. It involves an intimate knowledge of how the componentsinteract and exact details on the proper sequences of control.Only a Total Control dealer has the requisiteexperience and training to quickly and effectively customize a remote control for true automated operation.Congratulations on your choice! MX-1200 Owner's Manual © 2011 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manual may becopied or reproduced in any form without prior written consent from UniversalRemote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc.Entertainment Made Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of theirrespective companies or organizations.
MX-1200 COLOR TOUCH SCREENCongratulations! 1Using the TRC-1200 2Connecting the Battery Pack 3Using the Charging Base 3Displaying the Settings Screen 4Sleep Settings 5System 5Brightness 5Power 5Button Light 6Date and Time 6Calibration 6Pickup Settings 6Sound 7Factory Default 7Exit 7Maintaining Your MX-1200 8Specifications 8USA Limited Warranty Statement 9
Page 1MX-1200 COLOR TOUCH SCREENCongratulationsThank you for purchasing theComplete Control MX-1200 touchscreen universal remote control.This remote can wirelessly controlyour devices throughout the homeusing an RF base station.Controlling your home is simplewith the MX-1200 remote.Brilliant 2.4" color touch screen with audible button pressesThe MX-1200 has a programmable 2.4” color touch screen. Whenanybutton is pressed, an audible response is heard and the color LCDscreen as well as the remote buttons will light up.Fast setup of complex systems via Complete Control PC EditorTo fully automate your audio/video system, the programmer musthave detailed knowledge of each component and how the system isconnected and operated. Only a trained and certified professionalaudio/video installer can install an MX-1200 remote control in atimely and efficient manner.User interface customizable for any activity.Each button is customizable for activities such as Watch TV orListen to Radio. These activities can contain multiple commands(macros) which enable a single button press to turn the neededdevices ON or OFF.Ultra-reliable narrow band RF - compatible with URC 418 MHzRF Base Stations.The MX-1200 can communicate directly to RF base stations, suchas the MRF-350 and the MRF-260. It also natively communicates toURC Lighting via 418MHz RF. This gives the MX-1200 the ability tocontrol your system without being in direct line-of-sight.
Page 2MX-1200 COLOR TOUCH SCREENThe 4 way cursorbuttons enable youto both scroll lists ofartists, albums orsongs from yourMusic Server on theMX-1200 touchscreen or to navi-gate TV guides andmenus with ease.The Main buttonalways displays themain menu pages. The Page buttonsdisplay additionalpages of controls.The Volume and Mute buttons are always availableregardless of whatscreen is displayed.Using the MX-1200The MX-1200’s main pages display the activities and devices inyour system. Press the main page button to see what your choicesare. Large systems may have more than one page. Press either ofthe Page buttons if you don’t see all your devices. Gently press any screen button with your finger to select an activityor a device. The screen will change to a display of the buttons youneed for that activity/device. The Page buttons may reveal addition-al buttons for some devices and activities.When you would like to control another device, press the mainpage button and select a new device button.
MX-1200 COLOR TOUCH SCREENConnecting the Battery PackUnlock the rear cover by pressing down on the spring lock at thetop of the cover. Remove the cover. For shipment from the factory,the battery is left out of the MX-1200. Place the battery into thebattery compartment, making sure you align the contacts on thebattery to the contacts on the MX-1200. The battery will snap intoplace when aligned properly. Replace the cover and snap it intoplace.Using the Charging BasePlug the 5V adapter into apower outlet and into the backof the charging base. Gentlyplace the MX-1200 into thecradle of the charging base. Itautomatically aligns itself tothe contacts on the chargingbase. The Status light shouldimmediately light. Redindicates that it is charging.Blue shows that it is fullycharged. There is no harm inleaving the MX-1200 on itscharging base whenever it is not in use.Page 3Red indicates charging, Blue that the remote is fullycharged.Oh Sung to place photo ofMX-1200 in charger withboth blue and red LEDsindicated.
Page 4Displaying the Settings ScreenYou can enter the settings menu by pressing and holding theMAIN and OK button for three seconds. Once there, if you do notpress any button on the Settings screen, the MX-1200 will timeoutafter 30 seconds and return to the previous setting or Main screen.There are two pages of Settings screens. To access the other page,press either of the Page buttons. To select a setting, press the butonon the LCD screen. To go back a step or to get out of the settingsscreen, press the MAIN button.There are two pages of Settings screen. To access the other page, presseither of the Page buttons.MX-1200 COLOR TOUCH SCREENPage buttons reveal therest of the settings.Page 2 of the SettingsScreen
Page 5MX-1200 COLOR TOUCH SCREENSleep Settings Conserve energy by configuring the MX-1200 tofall asleep after a specified amount of time. Selectan amount of time by adjusting the slide bar.SystemThe System Information screen displays data aboutyour MX-1200's operating system, memory etc.BrightnessAdjust the screen brightness by moving the slider.Min (minimum) is the dimmest setting and Max(maximum) is the brightest setting.PowerYou can display the remaining charge by selectingPower. You can also adjust when the low batterywarning screen will appear.
Page 6MX-1200 COLOR TOUCH SCREENButton Light You can adjust the brightness of the LEDs thatbacklight the buttons of the MX-1200. Move theslider to the left to dim and move it to the right tobrighten the backlighting.PowerYour MX-1200 may have been programmed todisplay the time or date on the touch screen. Ifyou need to, you can adjust the time displayed bychanging the settings on this screen.CalibrationIf you like, you can calibrate where you tap byrunning the calibration. You will need a pen top orPDA stylus to do this. Do not attempt to calibrateusing your fingers.Date and TimeYou can set your MX-1200 to only turn on whentouched, or every time you move it. Adjust thepickup sensor level by sliding the bar to thedesired percentage.
MX-1200 COLOR TOUCH SCREENPage 7SoundYou can adjust the button beep to Off or Loudestby dragging the slider to your desired position.Factory DefaultWARNING! Only use this button when instructedto by Technical Support. It resets the memory ofthe MX-1200 to the factory condition. All yourprogramming will be lost! ExitWhen you have finished adjusting Settings, simply tap the Exit button toreturn to normal operation.
MX-1200 COLOR TOUCH SCREENPage 8Maintaining Your MX-1200Be careful not to scratch the touch screen, only use your finger to tapthe LCD touch screen or use a plastic pen top or PDA stylus. Never usea real pen, pencil or any other sharp object on the screen. Keep it awayfrom extreme cold or heat. The MX-1200 is not waterproof. Do not useit in any location that is damp or wet. If you spill water on it, take outthe battery pack and let the MX-1200 dry for 48 hours before poweringit up again. If you spill coffee or another beverage on it, clean it withdistilled water. Make sure no water gets inside the MX-1200. The touchscreen contains a glass element. Don’t drop the MX-1200 or impact itagainst anything.Use a soft, damp cloth to clean the screen. If the screen still showsfinger prints, clean it with watered down window-cleaner. Do not useanything abrasive and don’t use too much water, some might leak intothe interior.Precautions & Information: Rechargeable Lithium Ion BatteriesIf you will not be using your remote control for an extended period oftime, be sure to remove the battery. Do not attempt to disassemble,alter or apply heat to the battery. Use care to avoid dropping thebattery or subjecting it to severe impact that could damage the case.The battery should not be immersed in water. Lithium Ion batteries arerecyclable. For the address of a recycle drop-off location near you calltoll free 1-800-822-8837 or visit http://www.rbrc.comSpecificationsMemory - 32 Megabits of Flash Memory Total (28 Megabits for UserConfiguration)Customization Capability - Up to 48 devices and up to 8 pages each for atotal of 384 pages.Learning Capability - Standard frequencies (15kHz to 460kHz)Macro Capability - Up to 255 steps eachIR Range (Line of Sight via Infrared): 30-50 feet, depending on the environmentRF Range (radio frequency): 50 to 100 feet, depending upon the environmentRF Frequency: 418MHzWeight: 6.9 ounces (with battery loaded)Size: 8” H x 2.25” W x 1.25” DBattery: Lithium Ion rechargeable battery included
Page 9MX-1200 COLOR TOUCH SCREENUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive remedies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such softwareis provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner’s Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase is required. For product supportand other important information visit Universal Remote Control’swebsite: http://www.UniversalRemote.com or call the CustomerService Center (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called “B STOCK”or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludes prod-ucts sold by unauthorized resellers.
Page 10MX-1200 COLOR TOUCH SCREENLIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FORBREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDI-TION ON THIS PRODUCT. IN NO EVENT SHALL UNIVERSALREMOTE CONTROL BE LIABLE, WHETHER IN CONTRACT OR INTORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OFTHE PURCHASE PRICE OF THE PRODUCT, ACCESSORY ORSOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REV-ENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMA-TION OR DATA, SOFTWARE OR APPLICATIONS OR OTHERFINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITHTHE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCES-SORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGESMAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNI-VERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLEFOR STATEMENTS MADE BY OTHERS CONCERNING THE MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT. Some states or jurisdictions do not allow theexclusion or limitation of incidental or consequential damages, orallow limitations on how long an implied warranty lasts, so theabove limitations or exclusions may not apply to you. This LimitedWarranty gives you specific legal rights and you may have otherrights which vary from state to state or jurisdiction to jurisdiction.
Page 11MX-1200 COLOR TOUCH SCREENFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one more of the follow-ing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comVersion 8.18.11

Navigation menu