Ohsung Electronics URCMX780 RF Remote Controller User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. RF Remote Controller EMISSION TEST REPORT

UserManual.wiki >

Ohsung Electronics >

URCMX780 User Manual

Users Manual

Order Number : GETEC-C1-11-128 FCC Part 15 subpart C Test Report Number : GETEC-E3-11-051 Page 1 / 1 EUT Type: RF REMOTE CONTROLLER FCC ID.: OZ5URCMX780 APPENDIX I : USER’S MANUAL

MX-780 Owner’s Manual

TABLE OFCONTENTSCongratulations! 1Using the MX-780 2Displaying the Settings Screen 3Color Screen 3Button Lighting 4System 5Erasing and Resetting 5Specifications 6Contact US 6USA Limited Warranty Statement 7Federal Communication CommissionInterference Statement 9

Page 1MX-780 OWNER’SMANUALCongratulations!Thank you for purchasing the Complete Control MX-780 universalremote control. This unit can directly control every IR device inyour home. You can also control devices located in different roomsby integrating an MRF base station. Controlling your home is simplewith the MX-780 remote. Brilliant OLED color display with hard button interfaceWhen any button is pressed, the color OLED (Organic Light Emitting Diode) screen, as well as the remote buttons, light up. Once the screen is lit,each of the three buttons on either side of the screen are labeled.These button labels are based on the devices you want to watch or listen to. User interface customizable for any activityEach button is customizable for activities such as Watch TV orListen to Radio. These activities can contain multiple commands(macros) which enable a single button press to turn the neededdevices ON or OFF.Ultra-reliable narrow band RF - compatible with URC418 MHz RF Base StationsThe MX-780 can communicate directly to RF base stations, such asthe MRF-350 and the MRF-260. It also natively communicates toURC Lighting via 418MHz RF. This gives the MX-780 the ability tocontrol your system without being in direct line-of-sight. Fast setup of complex systems via Complete Control PC editorTo fully automate an audio/video system, and integrate two wayautomation of servers etc., the programmer must have a detailedknowledge of each component, LAN configuration, WiFioptimization and how the system is connected and operated. Onlya trained and certified professional audio/video installer can installan MX-780 remote control in a timely and efficient manner. Replacing the BatteriesUnlock the battery cover by pushing up on the spring lock at thebottom of the cover. Remove the cover. Observe the + and –polarity indicators inside the battery compartment and the batteries.Place the four AA batteries into their positions in the battery compartment.Now, replace the battery cover and snap it into place.

Page 2MX-780 OWNER’SMANUALUsing the MX-780 The MX-780 displays the title (Main or device) at the top of thescreen. Below the title, the OLED displays the device or commandnames. All of the hard buttons of the MX-780 are changed tocontrol the functions of the selected device.The Title displayswhat the main pageor device you cancontrol.Press either of thePage buttons to seeany other availablechoices. The Light buttonbacklights all of the buttons. The OLED buttonlabels describespecial featuresfor this activity. The Channel andPrevious Channelbuttons will changechannels when youhave selected deviceslike CABLE.The 4 way cursorbuttons enable youto navigate onscreen guides andmenus with ease.The Number keypadenters numbers forthe devices you’veselected. Whenwatching Cable TV,use the numberkeypad to enterchannel numbers.When listening to aCD, the numberkeypad enters tracknumbers.The Volume andMute buttons alwayscontrol the soundregardless of whatscreen is displayed.The Transport buttons(Play, Stop, Skip-, Skip+,FF, REW and Pause)operate when the selected device requiresthem. When watchingCable TV, use the numberkeypad to enter channelnumbers.When listening to a CD,the number keypadenters track numbers.

MX-780 OWNER’SMANUALDisplaying the Settings ScreenYou can adjust settings for the MX-780 whenever you like by pressing and holding the MAIN + ENTbutton for three seconds. When you do, the screen will change to the Settings menu. If you do not press any button on the Settings screen, the MX-780 returns to the previous Settings or Main screen after 30 seconds.There are two Settings screens. To access theother page, press either of the page buttons. Toselect a setting, press the button adjacent to thesetting you would like to adjust.To go back a step or to get out of the settingsscreen, press either the MAIN button or the EXITbutton on the MX-780.Color ScreenColor screen settings provides two configurable options.1. Brightness: Adjust the screen brightness by pressing the screen buttonson the left and right side of the slider bar. Once the brightness has been adjusted, simply press the Save button. Pressing the Cancel button will revert to the remote’s last saved brightness setting. Note: High brightness settings will delete the batteries faster.2. Automatic Turn Off: Adjust the duration the OLED screen willremain illuminated after a button is pressed. Pressing the left andright screen buttons, next to the slider bar,changes how long the OLED screen stays on.Pressing the Less side decreases the time in steps down to a minimum time of 5 seconds.Pressing the More side increases the time in steps up to a maximum of 60 seconds. Once the setting has been adjusted, simply press the Save button. Pressing the Cancel button reverts the remote’s Automatic Turn Off setting to the last saved setting. Note: Increasing the Auto Turn off time will delete the batteries faster. Page 3

Page 4Button LightingThe Button Light settings page provides two configurable optionsfor how the MX-780’s hard buttons should behave.1. Automatic ON: Adjusting this setting controls when the hardbutton backlight automatically turns on.a. Automatic Light Yes: Every time abutton is pressed the button backlight automatically turns on.b. Automatic Light No: The only wayto turn on the hard buttonbacklight is to press the dedicatedLights button, located on the rightside of the remote control.Once all changes have been made, pressthe Save button. Pressing the Cancelbutton reverts to the remote’s last savedsetting. Note: Selecting AutoLight Yes willdelete the batteries faster.2. Automatic Turn Off: You can adjust the amount of time the backlight remains on after a button is pressed. Press the left andright screen buttons next to the slider bar to change the duration. Pressing the Lessside decreases the time in steps down to a minimum of 5 seconds. Pressing the More side increases the time in steps up to a maximum of 60 seconds. Once the setting has been adjusted, simply press the Save button. Pressing the Cancel button reverts to the remote’s last saved Automatic Turn off setting.Note: Increasing the Auto Turn off time will delete the batteriesfaster. MX-780 OWNER’SMANUAL

Page 5MX-780 OWNER’SMANUALSystem The System Settings page provides two options.1. Power Remaining: This option shows you how much battery life is remaining. You can also adjust when the low battery warning screen appears by pressing the screen buttons to the left and right of the slider bar. Once the low battery percentage is reached, a notification screen appears reminding you the batteries will need to be replaced. Once the setting has been adjusted, simply press the Save button. Pressing the Cancel buttonreverts to the remote’s last saved Power Remaining setting. 3. System Info: The System Info screendisplays data about the MX-780’s memoryusage and operating system version.Pressing the Next screen button takes youto the Operating System information, andpressing the Prev button takes you back tothe System Memory information. Erasing and ResettingWARNING! Only use this button when instructed by Technical Support.It resets the memory of the MX-780 to the factory default. All of your programming will be lost!To erase your MX-780 program, press the Erasebutton to return to factory default. Once selected a secondary screen will ask if you really want to erase the program.

MX-780 OWNER’SMANUALPage 6SpecificationsMicroprocessor: ARM7TDMIFLASH: 32Mbit Nor FLASHDisplay: 1.46” PMOLED (128 x 128)Total Customization Capability: Up to 48 devices and up to 8 pageseach fot a total of 384 pages.Learning Capability: Standard frequencies (15kHz to 460kHz)Macro Capability: Up to 255 steps eachIR Range (Line of Sight via Infrared): 30-50 feet, depending on theenvironmentRF Range (radio frequency): 50 to 100 feet, depending upon theenvironmentRF Frequency: 418MHzWeight: 8.5 oz. (with battery)Size: 8.7”H x 2.2”W x 1.3”DBatteries: Four AA Alkaline Batteries (included)Battery Life: 18 Hours of continuous button pressing with backlightingand LCD ON (months of use for most users).Users should expect some variation based on the brandof alkaline batteries used.Note: In actual use, the MX-780 protects itself if it gets stuckbetween couch cushions (with a button being continuouslypressed). After 30 seconds the MX-780 will turn off, and will-not turn on again until the button is released.Contact UsNeed assistance or have questions? Our Customer Service Support Center is here to help.Call (914) 835-4484 to speak with a customer servicerepresentative or email us at techsupport@universalremote.com500 Mamaroneck Avenue, Harrison, NY 10528Phone: (914) 835-4484 Fax: (914) 835-4532www.universalremote.com

Page 7USA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive reme-dies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such soft-ware is provided “AS IS” unless expressly provided for in anyenclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner’s Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase is required. For product supportand other important information visit Universal Remote Control’swebsite: http://www.UniversalRemote.com or call the CustomerService Center (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called “B STOCK”or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludes prod-ucts sold by unauthorized resellers. MX-780 OWNER’SMANUAL

MX-780 OWNER’SMANUALPage 8LIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FORBREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDI-TION ON THIS PRODUCT. IN NO EVENT SHALL UNIVERSALREMOTE CONTROL BE LIABLE, WHETHER IN CONTRACT OR INTORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OFTHE PURCHASE PRICE OF THE PRODUCT, ACCESSORY ORSOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REV-ENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMA-TION OR DATA, SOFTWARE OR APPLICATIONS OR OTHERFINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITHTHE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCES-SORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGESMAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNI-VERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLEFOR STATEMENTS MADE BY OTHERS CONCERNING THE MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT. Some states or jurisdictions do not allow theexclusion or limitation of incidental or consequential damages, orallow limitations on how long an implied warranty lasts, so theabove limitations or exclusions may not apply to you. This LimitedWarranty gives you specific legal rights and you may have otherrights which vary from state to state or jurisdiction to jurisdiction.REV020708

MX-780 OWNER’SMANUALPage 9Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturercould void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment.Such modifications could void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the partyresponsible for compliance could void the authority to operate equipment.

Page 10NOTE

Page 11NOTE

500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0066E Rev 01