Ohsung Electronics URCMX890 RF Remote Controller User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. RF Remote Controller EMISSION TEST REPORT

user manual

G Order Number : GETEC-C1-12-297 FCC Part 15 subpart C Test Report Number : GETEC-E3-12-102 Page 1 / 1 EUT Type: RF REMOTE CONTROLLER FCC ID.: OZ5URCMX890 APPENDIX H : USER’S MANUAL G
MX-890 Color LCD ScreenOwner’s Manual
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 This remote control was Custom Programmed for you by:For questions about your Custom Programming call:Custom Programming of a complex home theater and/or a multi-roomsystem is one of the most challenging tasks within an audio/videoinstallation. It involves an intimate knowledge of how the componentsinteract and exact details on the proper sequences of control.Only a Complete Control dealer has the requisite experience and trainingto quickly and effectively customize a remote control for true automatedoperation.Congratulations on your choice! MX-890 Owner's Manual © 2012 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manual may becopied or reproduced in any form without prior written consent from UniversalRemote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc.All other brand or product names are trademarks or registered trademarks of theirrespective companies or organizations.
TABLE OFCONTENTSCongratulations! 1Using the MX-890 2Connecting the Battery Pack 3Using the Charging Base 3Resetting the MX-890 3Displaying the Settings Screen 4Sleep Settings 5System 5Brightness 5Power 6Button Light 6Date and Time 6Sound 7Pickup Settings 7Factory Default 7Exit 7Maintaining Your MX-890 8Specifications 8USA Limited Warranty Statement 9Federal Communication CommissionInterference Statement 11
MX-890 COLOR LCD SCREENPage 1CongratulationsThank you for purchasing the Complete Control MX-890 color LCDscreen universal remote control. This remote can directly control yourdevices via IR or wirelessly control your devices throughout the homeusing an RF base station. Controlling your home is simple with theMX-890 remote.Brilliant 2" color LCD screen with pickup sensorThe MX-890 has a programmable 2” color LCD screen. When theremote is picked up, the color LCD screen as well as the remote buttons, will light up.Control devices using ultra-reliable narrow band RFThe MX-890 can communicate directly to RF base stations, suchas the MRX-1/RFX-250, MRF-350 and the MRF-260. It also nativelycommunicates to URC Lighting via RF. This gives the MX-890 the ability to control your system without being in direct line-of-sight.Identify a remote using Room LabelsUse the included room labels to keep track of each room’s MX-890.No longer will you have the kitchen remote in the living room; simplyadd a room label for easy identification.Charging Base Included..no need for batteriesThere is no need to constantly purchase batteries, just place theremote on the charging base and recharge the battery...DONE!Fast setup of complex systems via Complete Control PC ProgramTo fully automate your audio/video system, the programmer musthave detailed knowledge of each component and how the system isconnected and operated. Only a trained and certified professionalaudio/video installer can program an MX-890 remote control in atimely and efficient manner. User interface customizable for any activityEach button is customizable for activities such as Watch TV orListen to Radio. These activities can contain multiple commands(macros) which enable a single button press to turn the neededdevices ON or OFF. Only a trained and certified professionalaudio/video installer can program an MX-890 remote control in atimely and efficient manner.
MX-890 COLOR LCD SCREENUsing the MX-890The MX-890's main pages display the activities and devices in yoursystem. Press the MAIN button to view your devices or the activitiesplaced here by your custom professional. Large systems may havemore than one page. Press either of the PAGE buttons if you don’tsee all your devices. Press any LCD hard button, to select an activityor a device. The screen will change to display the buttons you needfor that activity/device. The PAGE buttons may reveal additional buttons for some devices and activities.When you would like to control another device, press the MAINpage button and select a new device button.The Power button turnsyour system ON.The Volume and Mutebuttons always controlthe sound regardless ofwhat screen is displayed.Press either of the Pagebuttons to see any otheravailable choices. The Transport buttons(Play, Stop, Rec, Skip-,Skip+, FF, REW andPause) operate when theselected device requiresthem. When watchingCable TV, use the number keypad to enterchannel numbers. Whenlistening to a CD, thenumber keypad enterstrack numbers. The Channel andPrevious Channelbuttons will changechannels when youhave selected deviceslike CABLE. The Number keypadenters numbers for thedevices you’ve selected.When watching Cable TV,use the number keypad toenter channel numbers.When listening to a CD,the number keypad enterstrack numbers.Page 2When pressed, theseLCD hard buttonsexecute the activity/command/device onthe associated icon.The Navigation buttonsenable you to navigateon screen guides andmenus with ease.The System buttonturns all yourequipment OFF. The Color buttons workto control additionaloptions provided by otherdevices like Cable,Satellite or Blu-Ray.The Main button accessesall programmed activities and devices.
MX-890 COLOR LCD SCREENConnecting the Battery PackUnlock the rear cover by pressing down on the spring lock at thetop of the cover. Remove the cover. For shipment from the factory,the battery is left out of the MX-890. Place the battery into thebattery compartment, making sure you align the contacts on thebattery to the contacts on the MX-890. The battery will snap intoplace when aligned properly. Replace the cover and snap it intoplace.Using the Charging BasePlug the 5V adapter into a power outlet and intothe back of the charging base. Gently place the MX-890 into the cradle of thecharging base. It automatically aligns itselfto the contacts on the charging base. The Status light should immediately light. Red indicates that it is charging. Blue shows that itis fully charged. There is no harm in leaving the MX-890 on its charging base whenever it is not in use.Optionally, the 5V power adapter can be pluggeddirectly to the bottom of the MX-890.Resetting the MX-890Normally, resetting the MX-890 is not necessary. However, if younotice unusual behavior, press the reset button within the batterycompartment. Press the Reset button to cycle the MX-890’s powerand reboot the unit. Page 3Red indicates charging, Blue that the remote is fully charged.
Page 4Displaying the Settings ScreenYou can enter the Settings menu by pressing and holding the MAIN andENT button for three seconds. The MX-890 will timeout after it is idle for30 seconds and return to the previous setting or Main screen. There aretwo pages of Settings screens. Select a setting by pressing a button on theLCD screen. Press either of the PAGE buttons to access the other page. Togo back a step or to get out of the settings screen, press the MAIN button.There are two pages of Settings screen. To access the other page, presseither of the PAGE buttons.MX-890 COLOR LCD SCREENPage 2 of the SettingsScreenPage 1 of the SettingsScreenPage buttons reveal therest of the settings.
MX-890 COLOR LCD SCREEN Page 5Sleep Settings Conserve energy by configuring the MX-890 tofall a sleep after a specified amount of time. Selectan amount of time by pressing the left or right hard buttons, to adjust the slide bar.SystemThe System Information screen displays data about your MX-890's operating system, memory etc.BrightnessAdjust the screen brightness by pressing the left or right hard buttons to move the slider. Min (minimum) is the dimmest setting and Max (maximum) is the brightest setting.
Page 6MX-890 COLOR LCD SCREENPowerYou can display the remaining charge by selecting Power. Press the left or right hard buttons to move the slider. MIN or MAX adjusts thetiming of the low battery warning notification.Button Light You can adjust the brightness of the LEDs thatbacklight the buttons of the MX-890. Press the left hard button to dim or press the right hard button to brighten the backlighting.Date and TimeYour MX-890 may have been programmed todisplay the date or time on the LCD screen. If you need to, press the left or right hard buttons to adjust the time displayed by changing the settings on this screen.
MX-890 COLOR LCD SCREENPage 7SoundAdjust the button beep level to Off or Loudest by pressing the left or right hard buttons. Pickup SettingsYou can set your MX-890 to turn on whenpicked up. Adjust the Pickup Sensor by pressing the associated hard button adjacent to the ON or OFF check box.Factory DefaultWARNING! Only use this button when instructedto by Technical Support. It resets the memory ofthe MX-890 to the factory condition. All yourprogramming will be lost! Press and hold the Erase button to return the remote to its factory condition.ExitWhen you have finished adjusting Settings, simply tap the Exit button toreturn to normal operation.
MX-890 COLOR LCD SCREENPage 8Maintaining Your MX-890Keep it away from extreme cold or heat. The MX-890 is not waterproof.Do not use it in any location that is damp or wet. If you spill water onit, take out the battery pack and let the MX-890 dry for 48 hours beforepowering it up again. If you spill coffee or another beverage on it, cleanit with distilled water. Make sure no water gets inside the MX-890.Don’t drop the MX-890 or impact it against anything.Use a soft, damp cloth to clean the screen. Do not use anything abrasive and don’t use too much water, some might leak into the interior.Precautions & Information: Rechargeable Lithium Ion BatteriesIf you will not be using your remote control for an extended period oftime, be sure to remove the battery. Do not attempt to disassemble,alter or apply heat to the battery. Use care to avoid dropping thebattery or subjecting it to severe impact that could damage the case.The battery should not be immersed in water. Lithium Ion batteries arerecyclable. For the address of a recycle drop-off location near you calltoll free 1-800-822-8837 or visit http://www.rbrc.comSpecificationsCPU : ARM 32-bit Cortex-M3 (72MHz)Memory : 8Mbit SRAM, 64Mbit Flash Customization Capability : Up to 200 devices and up to 10 pages each for atotal of 2000 pages.Learning Capability : Standard frequencies (15kHz to 460kHz)Macro Capability : Up to 255 steps eachIR Range (Line of Sight via Infrared) : 30-50 feet, depending on the environmentRF Range (radio frequency) : 50 to 100 feet, depending upon the environmentRF Frequency : 418 MHzWeight : 5.73 ounces (with battery loaded)Size : 8.46”H x1.97”W x 1.02” DBattery : Lithium Ion rechargeable battery included
MX-890 COLOR LCD SCREENPage 9USA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new condition,is warranted against defects in materials or workmanship as follows:UNIVERSAL REMOTE CONTROL, INC. warrants this product againstdefects in material or workmanship for a period of one (1) year and as setforth below. Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange the productfor a comparable new or rebuilt product. In the event of a defect, theseare your exclusive remedies.This Limited Warranty covers only the hardware components packagedwith the Product. It does not cover technical assistance for hardware orsoftware usage and it does not cover any software products whether ornot contained in the Product; any such software is provided "AS IS" unlessexpressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid,in its original packaging or packaging affording adequate protection toUniversal Remote Control at the address provided in the Owner's Manual.It is your responsibility to backup any macro programming, artwork,software or other materials that may have been programmed into yourunit. It is likely that such data, software, or other materials will be lostduring service and Universal Remote Control will not be responsible forany such damage or loss. A dated purchase receipt, Bill of Sale, InstallationContract or other verifiable Proof of Purchase is required. For productsupport and other important information visit Universal Remote Control'swebsite: http://www.UniversalRemote.com or call the Customer ServiceCenter (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification ofor to any part of the Universal Remote Control product. This LimitedWarranty does not cover Universal Remote Control products sold asUSED, AS IS, REFURBISHED, so-called “B STOCK” or consumables(such as batteries). This Limited Warranty is invalid if the factory-appliedserial number has been altered or removed from the product. This LimitedWarranty is valid only in the United States of America. This LimitedWarranty specifically excludes products sold by unauthorized resellers.
MX-890 COLOR LCD SCREENPage 10LIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANYINCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THISPRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTE CONTROLBE LIABLE, WHETHER IN CONTRACT OR IN TORT (INCLUDINGNEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASEPRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FORANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIALDAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFT-WARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISINGOUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITYTO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THEFULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THEREIS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSALREMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATE-MENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT.Some states or jurisdictions do not allow the exclusion or limitation ofincidental or consequential damages, or allow limitations on howlong an implied warranty lasts, so the above limitations or exclusionsmay not apply to you. This Limited Warranty gives you specific legalrights and you may have other rights which vary from state to state orjurisdiction to jurisdiction.REV020708
Page 11MX-890 COLOR LCD SCREENFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one more of the follow-ing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.
Page 12NOTE
Page 13NOTE
Page 14NOTE
Page 15NOTE
Declaration of Conformity Code of Federal Regulations (CFR) 47, Part 2.906 Equipment Class : Computing device peripheral EUT Type : RF REMOTE CONTROLLER Rule Part(s) : FCC Part 15 subpart B Test Procedure(s) : ANSI C63.4 (2009) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operating. We hereby declare that this device bearing the trade name and model specified above has been shown to be in compliance with the applicable FCC rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the commission’s requirement Date of issue : Name and signature of authorized person : James NovakUniversal Remote Control Inc. MODEL NAME:MX-890TRADE NAME:UNIVERSAL Remote ControlRESPONSIBLE PARTY:Universal Remote Control Inc.ADDRESS:500Mamaroneck Avenue, Harrison, NY 10528, U.S.ACONTACT PERSON:James NovakTELEPHONE NUMBER:(914)835-4484
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0142A Rev 01

Navigation menu