Ohsung Electronics URCRFTX1 RF TRANSMITTER User Manual User s Manual H ok

Ohsung Electronics Co., Ltd. RF TRANSMITTER User s Manual H ok

Users Manual

Order Number : GETEC-C1-09-089 FCC Part 15 subpart C Test Report Number : GETEC-E3-09-042 Page 1 / 1 EUT Type: RF Transmitter FCC ID.: OZ5URCRFTX1 APPENDIX I : USER’S MANUAL
RFTX-1 Installation Manual
RFTX-1 Installation Manual ©2009 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this man-ual may be copied or reproduced in any form without prior written con-sent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOROPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADEIN THIS MANUAL. The Home Theater installation on the cover was designed and installed byStone-Glidden of King of Prussia and Doylestown, PA.The information in this manual may be subject to change without priornotice. Complete Control is a registered trademark of Universal Remote Control,Inc. All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSIntroduction 1Parts Guide 2Installation 2Specifications 2USA Limited Warranty Statement 3FCC Interference Statement 4
Page 1RFTX-1 BASE STATIONIntroductionThe RFTX-1 is a Narrow Band transmitter for IP or Z Band base stations. It’spurpose is to transmit standard narrow band RF to URC Lighting controls.3. The RFTX-1 transmits the code pat-terns sent by the MRZ-260 which oper-ates the lights via 418MHz (required forall URC lighting with an MRFA designa-tion) or 433MHz Narrow Band (requiredfor all URC lighting with an MRFB desig-nation). 2. The MRZ-260 receives the Z Bandsignals of the MX-880Z and outputs thecode patterns to the RFTX-1.1. The MX-880Z sends Z Band radiowaves in every direction, so youdon’t have to point the remote any-more!
Page 2RFTX-1 BASE STATIONParts GuideThe RFTX-1 RF Base Station includes:Installation1. Plug the RFTX-1 into the RFTX jack of the IP or ZBand base station. The RedPower LED should light.2. Select either the 418 or 433.92 band utilizing the switch on the side of theRFTX-1.3. Place the RFTX-1 in a location away from microprocessor based AV compo-nents and any metal walls or structure.Note: The RF LED will light whenever the RFTX-1 transmits.SpecificationsRF Range (radio frequency): 50 to 100 feet, depending upon the environmentRF Frequency: 418MHz or 433.92 MHz (User Selectable)Weight: 2.9 ounces Size: 1.5” H x 2.25” W x .45” D1 - RFTX-1 Transmitter2 - Mounting Plate for wall mounting the RFTX-13 - Screws for wall mounting4 - Cable for connecting to the MRZ-260.
Page 3RFTX-1 BASE STATIONUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive remedies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such soft-ware is provided "AS IS" unless expressly provided for in anyenclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner's Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase is required. For product supportand other important information visit Universal Remote Control'swebsite: http://www.UniversalRemoteControl.com or call theUniversal Remote Control Customer Service Center (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called "B STOCK"or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludesproducts sold by unauthorized resellers.
Page 4RFTX-1 BASE STATIONFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or tel-evision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one more of the following meas-ures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning!Changes or modifications not expressly approved by the manufacturer could void theuser's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user'sauthority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2) thisdevice must accept any interference received, including interference that may causeundesired operation.Any changes or modifications not expressly approved by the party responsible for com-pliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0071A Rev.01

Navigation menu