Ohsung Electronics URCRFTX1 RF TRANSMITTER User Manual User s Manual H ok

Download:
Mirror Download [FCC.gov]
Document ID	1100225
Application ID	8jeGoL6kT5obJ6+AdrGOMA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.55kB (794334 bits)
Date Submitted	2009-04-22 00:00:00
Date Available	2009-06-06 00:00:00
Creation Date	2009-04-21 11:17:45
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-04-21 11:28:11
Document Title	Microsoft Word - User_s Manual_H_ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EMC CENTER

Order Number
: GETEC-C1-09-089
FCC Part 15 subpart C
Test Report Number
: GETEC-E3-09-042
Page 1 / 1
APPENDIX I
: USER’S MANUAL
EUT Type: RF Transmitter
FCC ID.: OZ5URCRFTX1
RFTX-1 Installation Manual
RFTX-1 Installation Manual ©2009 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR
OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE
IN THIS MANUAL.
The Home Theater installation on the cover was designed and installed by
Stone-Glidden of King of Prussia and Doylestown, PA.
The information in this manual may be subject to change without prior
notice.
Complete Control is a registered trademark of Universal Remote Control,
Inc.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF CONTENTS
Introduction
Parts Guide
Installation
Specifications
USA Limited Warranty Statement
FCC Interference Statement
RFTX-1 BASE STATION
Introduction
The RFTX-1 is a Narrow Band transmitter for IP or Z Band base stations. It’s
purpose is to transmit standard narrow band RF to URC Lighting controls.
1. The MX-880Z sends Z Band radio
waves in every direction, so you
don’t have to point the remote anymore!
2. The MRZ-260 receives the Z Band
signals of the MX-880Z and outputs the
code patterns to the RFTX-1.
3. The RFTX-1 transmits the code patterns sent by the MRZ-260 which operates the lights via 418MHz (required for
all URC lighting with an MRFA designation) or 433MHz Narrow Band (required
for all URC lighting with an MRFB designation).
Page 1
RFTX-1 BASE STATION
Parts Guide
The RFTX-1 RF Base Station includes:
1 - RFTX-1 Transmitter
2 - Mounting Plate for wall mounting the RFTX-1
3 - Screws for wall mounting
4 - Cable for connecting to the MRZ-260.
Installation
1. Plug the RFTX-1 into the RFTX jack of the IP or ZBand base station. The Red
Power LED should light.
2. Select either the 418 or 433.92 band utilizing the switch on the side of the
RFTX-1.
3. Place the RFTX-1 in a location away from microprocessor based AV components and any metal walls or structure.
Note: The RF LED will light whenever the RFTX-1 transmits.
Specifications
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz or 433.92 MHz (User Selectable)
Weight: 2.9 ounces
Size: 1.5” H x 2.25” W x .45” D
Page 2
RFTX-1 BASE STATION
USA Limited Warranty Statement
Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as
follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one
(1) year and as set forth below. Universal Remote Control will, at its
sole option, repair the product using new or comparable rebuilt
parts, or exchange the product for a comparable new or rebuilt
product. In the event of a defect, these are your exclusive remedies.
This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for
hardware or software usage and it does not cover any software
products whether or not contained in the Product; any such software is provided "AS IS" unless expressly provided for in any
enclosed software Limited Warranty.
To obtain warranty service, you must deliver the product, freight
prepaid, in its original packaging or packaging affording adequate
protection to Universal Remote Control at the address provided in
the Owner's Manual. It is your responsibility to backup any macro
programming, artwork, software or other materials that may have
been programmed into your unit. It is likely that such data, software, or other materials will be lost during service and Universal
Remote Control will not be responsible for any such damage or
loss. A dated purchase receipt, Bill of Sale, Installation Contract or
other verifiable Proof of Purchase is required. For product support
and other important information visit Universal Remote Control's
website: http://www.UniversalRemoteControl.com or call the
Universal Remote Control Customer Service Center (914) 8354484.
This Limited Warranty only covers product issues caused by defects
in material or workmanship during ordinary consumer use. It does
not cover product issues caused by any other reason, including but
not limited to product issues due to commercial use, acts of God,
third-party installation, misuse, limitations of technology, or modification of or to any part of the Universal Remote Control product.
This Limited Warranty does not cover Universal Remote Control
products sold as USED, AS IS, REFURBISHED, so-called "B STOCK"
or consumables (such as batteries). This Limited Warranty is invalid
if the factory-applied serial number has been altered or removed
from the product. This Limited Warranty is valid only in the United
States of America. This Limited Warranty specifically excludes
products sold by unauthorized resellers.
Page 3
RFTX-1 BASE STATION
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.
Warning!
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Page 4
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0071A Rev.01

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2009:04:21 11:17:45+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:04:21 11:28:11+09:00
Metadata Date                   : 2009:04:21 11:28:11+09:00
Format                          : application/pdf
Title                           : Microsoft Word - User_s Manual_H_ok.doc
Creator                         : EMC CENTER
Document ID                     : uuid:214d694e-1c7d-452d-8090-9ca9efbca2df
Instance ID                     : uuid:61bfc328-6d27-444b-a8af-ecf87428b60f
Has XFA                         : No
Page Count                      : 9
Author                          : EMC CENTER

EXIF Metadata provided by EXIF.tools