Ohsung Electronics URCTDC7100CG Wireless Charger User Manual H User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	3157937
Application ID	U34CMko6vQvFEVZubUes5g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.52kB (631552 bits)
Date Submitted	2016-10-07 00:00:00
Date Available	2016-11-21 00:00:00
Creation Date	2017-12-15 21:49:53
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-15 21:49:53
Document Title	Microsoft Word - H_User_s Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C1A4BCF8C8C6

Order Number
: GETEC-C1-16-340
FCC Part 18
Test Report Number
: GETEC-E3-16-048
Page 1 / 1
APPENDIX H
: USER’S MANUAL
EUT Type: Wireless Charger
FCC ID.: OZ5URCTDC7100CG
Wireless Charger Manual
Product Name : Wireless Charging PAD & Receiver
Model : PTC-130 / PRC-110
Manufacturer : Partron Co., Ltd.
22 Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Korea 445-170
TEL 82-31-201-7700 | FAX 82-31-201-7800 |
Homepage www.partron.co.kr / www.croise.co.kr
Precautions for safety
The contents inside the product warranty is described below to ensure user's safety and prevent
property damage.
Please read the manual carefully to use the product appropriately.
Partron is not responsible for any injury or damage occurred by not following safety precautions.
Please do not use damaged power cord, plug, and loose socket.
Please do not contact power plug with wet hands, and do not unplug by pulling the cord part.
Please do not bend or damage power cord.
Please do not place or use the product nearby coin, key, cell phone, accessories, metal.
The product could cause the heat.
If the product overheated, please put down the cell phone from the charger for separation. Then,
please pause using the product.
Please be cautious in use since the contact with the heated product on the skin could cause the
red spots, pigmentation, and low-temperature burn.
Please do not place the product nearby stove, microwave, heating utensil, or high heat container.
This may cause a re.
- Do not drop the product or impact on the product.
- Do not store or leave the product on a sloping area.
- Product can be damaged, and internal parts can be broken.
- Please be cautious and guide children, baby or pet not to suck or bite the product.
- Please do not use the product other than its original purpose.
- Please leave the product on dry area where is not wet or damp.
Humidity or liquid components can damage on part and circuit of product. If product gets wet,
remove the moisture with a dry towel and take it to service center.
- Do not alter, disassemble, or repair.
Make sure to use a repair service center qualied by Parton. Free repair is not available if there is
any alteration, disassemble, or repair.
This device is built for home use (B level), and completed EMC registration. It is usable in every
area, and primarily intended for use in homes and offices.
Block Diagram
WPC-based wireless power systems consist of a charging pad (primary, transmitter) and the
secondary-side equipment (receiver). There are coils placed in the charging pad and secondary
equipment, which magnetically couple to each other when the receiver is placed on the
transmitter.
Power is transferred from the primary to the secondary by transformer action between the
coils. The receiver can achieve control over the amount of power transferred by requesting the
transmitter to change the field strength by changing the frequency, or duty cycle, or voltage rail
energizing the primary coil.
Using the Product
1. Please connect power after connecting AC ADAPTER to wireless charger.
( ! ) Be sure to use original 5V/2.0A AC ADAPTER. Otherwise, it will not be recharged properly,
or it can cause defects or damage.
- Especially, AC ADAPTER for wireless charger is 5V/2.0A, so use of nonstandard ADAPTER can
lead to slow recharge.
- If this 5V/2.0A original AC ADAPTER is used for existing mobile charger or other low ratings,
it could cause re, explosion, or defects/damage.
( !! ) Current status of product could be checked by the color of status indicator on wireless
charger. If the status indicator does not function properly or incorrectly recognized,
disconnect the charger and reconnect them.
Color of Status indicator
Wireless Charger Status
Off
Standby or Charging completed
White Fixed
Charging in progress
Orange Flashed Fast
When foreign object (knife, key, metal substance and etc) is
recognized between TDC-7100 (or cell phone) and cradle,
FOD function operates
Orange Flashed Slow
Pressure lower than rated power (5V/2A of Genuine Adapter is
recommended.)
Orange Fixed
Wireless charger operates inappropriately (Over Temperature)
* Color of Status indicator after full charge will not be changed per phones
2. Firstly, please place cell phone on wireless charger after attaching either wireless charge cover
or patch.
( ! ) Be sure to place rear side of your cell phone completely on wireless charger.
3. Please separate AC ADAPTER from wireless charger when charging is completed.
( ! ) To check charging status, please check charger icon on your cell phone display.
- Wireless charger might not function properly if foreign substances exist between cell phone
and wireless charger.
- DMB is not available while wireless charging.
- If wireless charger is used where signal is weak, reception rate of cell phone could be weak.
- This product is compatible with the Wireless Power Consortium(WPC) certied product.
4. Please do not place wireless charger cover on wireless charger alone. This product has been
designed to flow current when charger cover and wireless charger are correctly
in contact. If a charger cover is left alone on charger, it might lead to excessive heat, which could
cause re or defects/damage on the device.
(X)
(O)
Spec and Features
Wireless charging is enabled to charge batteries without the use of cables or device-specific AC
adapters. As follows Detailed Specifications are :
ITEM
Specification
Size
200 x 125 x 17 (W x L x T) mm3
Recharging Method
Magnetic Induction Method (WPC Standard)
Transmission Power
DC 5W (Maximum 5V, 1A)
Using Frequency Range
115 ~ 205kHz
Input Power
DC 5V, 2.0A
Operating Temperature
0 ℃ ~ +55 ℃
$#% &
!"
#' $
!"
" *
$ "
#)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Author                          : 
Create Date                     : 2016:10:04 19:44:42+09:00
Modify Date                     : 2016:10:05 14:49:06+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:10:05 14:49:06+09:00
Format                          : application/pdf
Title                           : Microsoft Word - H_User_s Manual
Creator                         : 
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:cb03c0ff-f9dd-4f28-8725-6484e6459ee6
Instance ID                     : uuid:c08ed466-96db-4a0d-b640-a18dc2e0946a
Page Count                      : 8

EXIF Metadata provided by EXIF.tools