Ohsung Electronics URCZR1 Zigbee Router User Manual H Users manual

Ohsung Electronics Co., Ltd. Zigbee Router H Users manual

User Manual

Order Number : GETEC-C1-10-220 FCC Part 15 subpart C Test Report Number : GETEC-E3-10-149 Page 1 / 1 EUT Type: Zigbee Router FCC ID.: OZ5URCZR1 APPENDIX H : USER’S MANUAL
ZR-1 Z Repeater Owners Manual
ZR-1 Z Repeater Owners Manual ©2010 Universal Remote Control,Inc.The information in this manual is copyright protected.No part of this manual may becopied or reproduced in any form without prior written consent from UniversalRemote Control,Inc.Universal Remote Control,INC.shall not be liable for operational,technical or edito-rial errors/omissions made in this manual.The information in this manual may be subject to change without priornotice.Complete Control is a registered trademark of Universal Remote Control,Inc.All other brand or product names are trademarks or registered trademarks of theirrespective companies or organizations.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSIntroduction 1Features and Benefits 1Parts Guide 1ZR-1 Front and Side Panel Descriptions 2Specifications 2USA Limited Warranty Statement 3Federal Communication CommissionInterference Statement 4Regulatory Information to the user 5Declaration of Conformity 6
Page 1ZR-1 Z REPEATERIntroductionCongratulations on your purchase of the ZR-1 Z Repeater! The ZR-1is used to extend the operational range between Total Control prouctssuch as the TRC-780 and the MRX-10. Once joined to the MRX-10 itwill wirelessly relay communication between an TRC-780 and multi-ple ZR-1 repeaters. Features and BenefitsWirelessly extends the range between Total Control productsExtend the operational range between a MS-780 remote anda MRX-10 Advanced Network System Controller. Control lighting,music and more from throughout the home. Additional ZR-1 Repeaters can be joined to create a wireless meshnetwork throughout the home. Parts GuideThe ZR-1 Z Repeater includes:1 - ZR-1 Z Repeater 1 - AC Power Adapter1 - Wall Mount and 4 Screws 1 - Owner’s Manual
Page 2ZR-1 Z REPEATERZR-1 Front and Side Panel DescriptionsFront and Side PanelThe front panel consists of 2 indicator lights which will illuminatewhen in uPower LED: Indicates that the ZR-1 is powered on whenilluminated.Link LED: Indicates the status of the Z communication connectionto the MRX-10. Off = not connected, Blinking = attempting to con-nect, On Steady = connected. Antenna: Omnidirectional antenna. Adjust the antenna for best per-formance. Usually vertical positioning works well. DC9V Power: Attach the included 9V DC power supply here. Mounting Plate: May be attached to a wall or other surface with theincluded screws for easy slide on/off mounting.SpecificationsRF Frequency: 2.45GHz (ZigBee-Pro)Effective Range: Typically 50-75 ft, depending on environmentSize: L x D x H = 3.625" x 1.125" x 6.625" (with antenna vertical)Weight: 3 oz.Power Supply: 9V DC .300mAPowerLEDLinkLEDDC9VPowerMountingPlateAntenna
Page 3USA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for s period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive reme-dies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such soft-ware is provided “AS IS” unless expressly provided for in anyenclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner’s Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase is required. For product supportand other important information visit Universal Remote Control’swebsite: http://www.UniversalRemote.com or call the CustomerService Center (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called “B STOCK”or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludes prod-ucts sold by unauthorized resellers. ZR-1 Z REPEATER
Page 4Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one more of the follow-ing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.ZR-1 Z REPEATERFederal Communication Commission (FCC) Radiation Exposure StatementThe device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm or more from a person's body. Other operating configurations should be avoided.
Page 5Regulatory Information to the userCE conformity NoticeProducts with “CE” marking comply with the R&TTE Directive1995/5/EC, EMC Directive 2004/108/EC and Low VoltageDirective 2006/95/EEC issued by the commission of the EuropeanCommunity.1) R&TTE DirectiveLVD : EN 60950-1EMC : ETSI EN 301 489-1,3RF : ETSI EN 300 220-1,2: ETSI EN 3002) EMC DirectiveEmission : EN 55022Immunity : EN 55024Power : EN-61000-3-2, 3Safety instruction for charging internal rechargeable battery ofremote control CautionUse only with EN60950-1 approved as Limited power source anddouble insulation( ) marked power adaptor & same ratingsdescribed on the product label (9DVdc, 300mA). Declaration of Conformity“Hereby, Universal Remote Control Inc. declares that this ZR-1 is incompliance with the Essential requirements and other relevant provi-sions of Directive 1999/5/EC.”ZR-1 Z REPEATERCertificationType No.(Model No.) ZR-1Batch/Serial No. -Power Rating 9.0V , 300mAFrequency band 2.45GHz (ZigBee-Pro)
Page 6ZR-1 Z REPEATERDeclaration of ConformityCompany Name : Universal Remote Control Inc.Company Address : 500Mamaroneck Avenue, Harrison, NY 10528, U.S.AContact Info rmation : www.universalremote.comPhone: (914)835-4484 Fax: (914)835-4532Brand Name : UNIVERSAL remote controlProduct Name : Zig Bee REPEATERModel Name : ZR-1This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued bythe Commission of the European CommunityCompliance with these directives implies conformity to the following European Community EMC Directive EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 R&TTE Directive EN 60950-1 ETSI EN 301-489-1,3 ETSI EN 300 220-1,2 ETSI EN 300 List of test reports and/or certificate verified compliance with the standards aboveDate of issue : May 30, 2010Name and signature of authorized person : EMC Directive Report No. Testi ng Labora tory : Gumi College EMC Center R&TTE Directive Certificate No. Certificate Body : TUV Rheinland (No. 0197)James NovakSenior Product ManagerUniversal Remote Control Inc.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0097A Rev 01

Navigation menu