Ohsung Electronics URCZR1N Zigbee Repeater User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. Zigbee Repeater EMISSION TEST REPORT

Users Manual

G Order Number : GETEC-C1-11-239 FCC Part 15 subpart C Test Report Number : GETEC-E3-11-122 Page 1 / 1 EUT Type: Zigbee Repeater FCC ID.: OZ5URCZR1N APPENDIX H : USER’S MANUAL
ZR-1N Z RepeaterOwner’s Manual
ZR-1N Z Repeater Owner’s Manual ©2010 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manualmay be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc.UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPER-ATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this manual may be subject to change without prior notice.URC - Control the Experience is a registered trademark of Universal RemoteControl, Inc.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSIntroduction 1Features and Benefits 1Parts Guide 1ZR-1N Front and Side Panel Descriptions 2Specifications 3USA Limited Warranty Statement 3Federal Communication CommissionInterference Statement 5Regulatory Information to the user 6Declaration of Conformity 7
Page 1ZR-1N Z REPEATERIntroductionCongratulations on your purchase of the ZR-1N Z Repeater! The ZR-1Nis used to extend the operational range between Total Control productssuch as the TRC-780 and the MRX-10. Once joined to the MRX-10 itwill wirelessly relay communication between an TRC-780 and anotherZR-1N repeater. Features and BenefitsWirelessly extends the range between Total Control products. Extend theoperational range between a TRC-780 remote and a MRX-10 AdvancedNetwork System Controller. Control lighting, music and more from through-out the home.Parts GuideThe ZR-1N Z Repeater includes:1 - ZR-1N Z Repeater 1 - AC Power Adapter1 - Wall Mount and 4 Screws 1 - Owner’s Manual
Page 2ZR-1N Z REPEATERZR-1N Front and Side Panel DescriptionsThe front panel consists of 3 indicator lights which will illuminatewhen in use.Power LED: Indicates that the ZR-1N is powered on when illuminated.Status LED: The LED will show what the RF signal strength of theZR-1N to the MRX-10. By pressing the TEST button on the side ofthe unit, it will indicate the signal strength. When the LED is:. OFF: The ZR-1N is not testing for signal strength, and theTEST button should be pressed.. Orange: The signal strength is LOW, and the ZR-1N should bemove to a different location . Green: The signal strength is GOOD, and the ZR-1N is in agood location.Data LED: The LED will flash RED when the unit is transmitting orreceiving data. Antenna: Omnidirectional antenna. Adjust the antenna for best per-formance. Usually vertical positioning works well. DC9V Power: Attach the included 9V DC power supply here. Mounting Plate: May be attached to a wall or other surface with theincluded screws for easy slide on/off mounting.POWERLEDSTATUSLEDUSBDC9VPowerTESTMountingPlateAntennaDATALED
Page 3SpecificationsRF Frequency: 2.48GHz (Two-way RF)Effective Range: Typically 50-75 ft, depending on environmentSize: L x D x H = 3.625" x 1.125" x 6.625" (with antenna vertical)Weight: 3 oz.Power Supply: 9V DC 300mAUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive remedies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such soft-ware is provided "AS IS" unless expressly provided for in anyenclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner's Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase is required. For product supportand other important information visit Universal Remote Control'swebsite: http://www.UniversalRemote.com or call the CustomerService Center (914) 835-4484. ZR-1N Z REPEATER
Page 4This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called “B STOCK”or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludesproducts sold by unauthorized resellers. LIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FORBREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDI-TION ON THIS PRODUCT. IN NO EVENT SHALL UNIVERSALREMOTE CONTROL BE LIABLE, WHETHER IN CONTRACT OR INTORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OFTHE PURCHASE PRICE OF THE PRODUCT, ACCESSORY ORSOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REV-ENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMA-TION OR DATA, SOFTWARE OR APPLICATIONS OR OTHERFINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITHTHE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCES-SORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGESMAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNI-VERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLEFOR STATEMENTS MADE BY OTHERS CONCERNING THE MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT. Some states or jurisdictions do not allow theexclusion or limitation of incidental or consequential damages, orallow limitations on how long an implied warranty lasts, so theabove limitations or exclusions may not apply to you. This LimitedWarranty gives you specific legal rights and you may have otherrights which vary from state to state or jurisdiction to jurisdiction.REV020708ZR-1N Z REPEATER
Page 5ZR-1N Z REPEATERFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.Federal Communication Commission (FCC) Radiation Exposure StatementThe device and the antenna for this device must be installed to ensure aminimum separation distance of 20 cm more from a person's body. Otheroperating configurations should be avoided.
Page 6ZR-1N Z REPEATERRegulatory Information to the userCE conformity NoticeProducts with “CE” marking comply with the R&TTE Directive1995/5/EC, EMC Directive 2004/108/EC and Low VoltageDirective 2006/95/EEC issued by the commission of the EuropeanCommunity.1) R&TTE DirectiveLVD : EN 60950-1EMC : ETSI EN 301 489-1,3RF : ETSI EN 300 220-1,2: ETSI EN 3002) EMC DirectiveEmission : EN 55022Immunity : EN 55024Power : EN-61000-3-2, 3Use only with EN60950-1 approved as Limited power source anddouble insulation( ) marked power adaptor & same ratingsdescribed on the product label (9DVdc, 300mA). Declaration of Conformity“Hereby, Universal Remote Control Inc. declares that this ZR-1N is incompliance with the Essential requirements and other relevant provi-sions of Directive 1999/5/EC.”CertificationType No.(Model No.) ZR-1NBatch/Serial No. -Power Rating 9.0V , 300mAFrequency band 2.48GHz
Page 7Declaration of ConformityCompany Name : Universal Remote Control Inc.Company Address : 500Mamaroneck Avenue, Harrison, NY 10528, U.S.AContact Information : www.universalremote.comPhone: (914)835-4484 Fax: (914)835-4532Brand Name : UNIVERSAL remote controlProduct Name : ZR-1N Z RepeaterModel Name : ZR-1NThis product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued by the Commission of the European CommunityCompliance with these directives implies compliance with the standards above EMC Directive EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 R&TTE Directive EN 60950-1 ETSI EN 301-489-1,3 ETSI EN 300 220-1,2 ETSI EN 300 List of test reports and/or certificate verified compliance with the standards aboveDate of issue : November 30, 2010Name and signature of authorized person : EMC Directive Report No. Testing Laboratory : Gumi College EMC Center R&TTE Directive Certificate No. Certificate Body : TUV Rheinland (No. 0197)James NovakSenior Product ManagerUniversal Remote Control Inc.ZR-1N Z REPEATER
Page 8NOTE
Page 9NOTE
Page 10NOTE
Page 11NOTE
OCE-0097B Rev 01500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com

Navigation menu