Ohsung Electronics URCZR1N Zigbee Repeater User Manual EMISSION TEST REPORT
Ohsung Electronics Co., Ltd. Zigbee Repeater EMISSION TEST REPORT
Users Manual
Order Number : GETEC-C1-11-239 FCC Part 15 subpart C Test Report Number : GETEC-E3-11-122 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: Zigbee Repeater FCC ID.: OZ5URCZR1N ZR-1N Z Repeater Owner’s Manual ZR-1N Z Repeater Owner’s Manual ©2010 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. URC - Control the Experience is a registered trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 TABLE OF CONTENTS Introduction Features and Benefits Parts Guide ZR-1N Front and Side Panel Descriptions Specifications USA Limited Warranty Statement Federal Communication Commission Interference Statement Regulatory Information to the user Declaration of Conformity ZR-1N Z REPEATER Introduction Congratulations on your purchase of the ZR-1N Z Repeater! The ZR-1N is used to extend the operational range between Total Control products such as the TRC-780 and the MRX-10. Once joined to the MRX-10 it will wirelessly relay communication between an TRC-780 and another ZR-1N repeater. Features and Benefits Wirelessly extends the range between Total Control products. Extend the operational range between a TRC-780 remote and a MRX-10 Advanced Network System Controller. Control lighting, music and more from throughout the home. Parts Guide The ZR-1N Z Repeater includes: 1 - ZR-1N Z Repeater 1 - Wall Mount and 4 Screws 1 - AC Power Adapter 1 - Owner’s Manual Page 1 ZR-1N Z REPEATER ZR-1N Front and Side Panel Descriptions The front panel consists of 3 indicator lights which will illuminate when in use. Antenna Mounting Plate TEST USB DC9V Power POWER STATUS DATA LED LED LED Power LED: Indicates that the ZR-1N is powered on when illuminated. Status LED: The LED will show what the RF signal strength of the ZR-1N to the MRX-10. By pressing the TEST button on the side of the unit, it will indicate the signal strength. When the LED is: . OFF: The ZR-1N is not testing for signal strength, and the TEST button should be pressed. . Orange: The signal strength is LOW, and the ZR-1N should be move to a different location . Green: The signal strength is GOOD, and the ZR-1N is in a good location. Data LED: The LED will flash RED when the unit is transmitting or receiving data. Antenna: Omnidirectional antenna. Adjust the antenna for best performance. Usually vertical positioning works well. DC9V Power: Attach the included 9V DC power supply here. Mounting Plate: May be attached to a wall or other surface with the included screws for easy slide on/off mounting. Page 2 ZR-1N Z REPEATER Specifications RF Frequency: 2.48GHz (Two-way RF) Effective Range: Typically 50-75 ft, depending on environment Size: L x D x H = 3.625" x 1.125" x 6.625" (with antenna vertical) Weight: 3 oz. Power Supply: 9V DC 300mA USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product. In the event of a defect, these are your exclusive remedies. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided "AS IS" unless expressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid, in its original packaging or packaging affording adequate protection to Universal Remote Control at the address provided in the Owner's Manual. It is your responsibility to backup any macro programming, artwork, software or other materials that may have been programmed into your unit. It is likely that such data, software, or other materials will be lost during service and Universal Remote Control will not be responsible for any such damage or loss. A dated purchase receipt, Bill of Sale, Installation Contract or other verifiable Proof of Purchase is required. For product support and other important information visit Universal Remote Control's website: http://www.UniversalRemote.com or call the Customer Service Center (914) 835-4484. Page 3 ZR-1N Z REPEATER This Limited Warranty only covers product issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the Universal Remote Control product. This Limited Warranty does not cover Universal Remote Control products sold as USED, AS IS, REFURBISHED, so-called “B STOCK” or consumables (such as batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from the product. This Limited Warranty is valid only in the United States of America. This Limited Warranty specifically excludes products sold by unauthorized resellers. LIMITATION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTE CONTROL BE LIABLE, WHETHER IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATEMENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT. Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state or jurisdiction to jurisdiction. REV020708 Page 4 ZR-1N Z REPEATER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning! Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communication Commission (FCC) Radiation Exposure Statement The device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm more from a person's body. Other operating configurations should be avoided. Page 5 ZR-1N Z REPEATER Regulatory Information to the user CE conformity Notice Products with “CE” marking comply with the R&TTE Directive 1995/5/EC, EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EEC issued by the commission of the European Community. 1) R&TTE Directive LVD : EN 60950-1 EMC : ETSI EN 301 489-1,3 RF : ETSI EN 300 220-1,2 : ETSI EN 300 2) EMC Directive Emission : EN 55022 Immunity : EN 55024 Power : EN-61000-3-2, 3 Use only with EN60950-1 approved as Limited power source and double insulation( ) marked power adaptor & same ratings described on the product label (9DVdc, 300mA). Declaration of Conformity “Hereby, Universal Remote Control Inc. declares that this ZR-1N is in compliance with the Essential requirements and other relevant provisions of Directive 1999/5/EC.” Certification Type No.(Model No.) Batch/Serial No. Power Rating Frequency band ZR-1N 9.0V , 300mA 2.48GHz Page 6 ZR-1N Z REPEATER Declaration of Conformity Company Name Universal Remote Control Inc. Company Address Contact Information Brand Name 500Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.com Phone: (914)835-4484 Fax: (914)835-4532 UNIVERSAL remote control Product Name ZR-1N Z Repeater Model Name ZR-1N This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued by the Commission of the European Community Compliance with these directives implies compliance with the standards above EMC Directive EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 R&TTE Directive EN 60950-1 ETSI EN 301-489-1,3 ETSI EN 300 220-1,2 ETSI EN 300 List of test reports and/or certificate verified compliance with the standards above EMC Directive Report No. Testing Laboratory : Gumi College EMC Center R&TTE Directive Certificate No. Certificate Body : TUV Rheinland (No. 0197) Date of issue Name and signature of authorized person Page 7 November 30, 2010 James Novak Senior Product Manager Universal Remote Control Inc. NOTE Page 8 NOTE Page 9 NOTE Page 10 NOTE Page 11 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com OCE-0097B Rev 01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 최선미 Create Date : 2011:11:03 10:21:00+09:00 Modify Date : 2011:11:07 09:18:51+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 최선미 Title : EMISSION TEST REPORT Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2011:11:07 09:18:51+09:00 Producer : Acrobat Distiller 9.4.6 (Windows) Document ID : uuid:4cb0900c-ac63-4822-8ccb-2de148a4154c Instance ID : uuid:d631b371-fca5-4e47-9882-da601c751c8f Page Count : 17EXIF Metadata provided by EXIF.tools