Omron Automotive Electronics Korea OKA-202W UNIT ASSY-WIRELESS CHARGING User Manual OKA 202W ENG

Omron Automotive Electronics Korea Co., Ltd. UNIT ASSY-WIRELESS CHARGING OKA 202W ENG

User Manual

1. Constitution of the Unit Assy-Wireless Charging ( WPC ) for vehicleWireless Charger Unit, it’s possible to charge the receiver based upon WPC( Wireless Power Consortium )Standard.WPC detects the receiver based upon the WPC standard being put on the surface of charge, and begins to chargeit.WPC detects conditions of the receiver and controls the transmission electric power by the state of the battery ofit. When the receiver is removed,WPC will suspend the transmission electric power. When the receiver is full charge, WPC will suspend the transmission electric power.
2. User's manual (provisionally) ◎ Unit Assy - Wireless Charging ( OMRON KOREA : OKA-202W )You can charger a mobile phone or the battery pack and the like to Qi-compliant Wireless Charger Unit You can charger a mobile phone or the battery pack and the like to Qi-compliant Wireless Charger Unit. ※ Wireless Charger Unit is abbreviated as WPC.Frequency: 111kHz Voltage: 12V DC Power: 5W 1. Once a receiver is placed on the product, it transmits the power wirelessly.2. The LED connected to the product, signals the status as below.Charging: Amber Discharging: Green Error: Amber Blink Power state of vehicle is ACC or IGN, the product will be stand-by status. If a receiver such as smart phone is not placed properly, it emits Amber LED and receiver must be relocated.
FCC Part 15.19This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.FCC Part 15.21Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.The equipment is installed in a vehicle with a minimum distance of 20 cm to any direction between the radiator and users. During normal usage, it should be at least 20 cm away from the users.This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.IC RF Radiation Exposure StatementThis equipment complies with IC RF Radiation exposure limits set forth for an uncontrolled environment.This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Déclaration d'Industrie Canada sur l'exposition aux radiofréquencesCet équipement est conforme aux limites établies par Industrie Canada en matière d'exposition aux radiofréquences dans un environnement non contrôlé. Cet appareil et son antenne ne doivent pas être colocalisés ou fonctionner en conjonction avec tout autre antenne ou émetteur.Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps.

Navigation menu