Omron RFID Business Development Department V680-CHXD RFID Reader/Writer User Manual V600 CHUD RFID System User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	866243
Application ID	Owc02D9gjwJ7AJfxFkD1JQ==
Document Description	Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	155.83kB (1947849 bits)
Date Submitted	2007-11-08 00:00:00
Date Available	2007-11-09 00:00:00
Creation Date	2007-10-24 12:50:04
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-10-24 12:50:35
Document Title	V600-CHUD RFID System User's Manual
Document Creator	FrameMaker 6.0
Document Author:	Omron

RFID System
V680 Series
User’s Manual
PRELIMINARY
Hand-held Reader/Writer
V680-CHUD
V680-CH1D
V680-CH1D-PSI
ID Tags
V680 Series
Introduction
Introduction
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN
ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S
ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF
PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to
separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s
application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses
of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty
and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However,
some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key
specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased
products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical,
or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in
conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting
this document to another, please copy or transmit it in its entirety.
RFID System
User's Manual
Introduction
Introduction
Meanings of Signal Words
WARNING
Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate
injury, or may result in serious injury or death. Additionally, there may be significant property
damage.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury or in property damage.
Meanings of Signal Words
The following signal words are used in this manual.
Meanings of Alert Symbols
The following alert symbols are used in this manual.
Indicates the possibility of explosion under specific conditions.
Indicates general prohibitions for which there is no spacific symbol.
Alert statements in this Manual
The following alert statements apply to the products in this manual. Each alert statement also appears at the locations
needed in this manual to attract your attention.
WARNING
This product is not designed to be used either directly or indirectly in applications that detect
human presence for the purpose of maintaining safety. Do not use this product as a sensing device
for protecting human lives.
A lithium battery is built into SRAM Data Carriers and may occasionally combust, explode, or burn
if not treated properly. Dispose of SRAM Data Carriers as industrial waste and never disassemble,
apply pressure that would deform, heat to higher than 100°C, or incinerate SRAM Data Carriers.
RFID System
User's Manual
Introduction
Introduction
Precautions for Safe Use
Regulations and Standards
Observe the following precautions to ensure safe use of the product.
1. Do not use the product in environments with flammable, explosive, or corrosive gasses.
2. Do not attempt to disassemble, repair, or modify the product.
3. The USB driver must be installed in the personal computer before connecting the V600-CHUD to a
personal computer.
4. Do not subject cables to excessive loads.
5. Observe all warnings and precautions given in the body of this manual.
6. Discontinue usage and turn OFF the power supply immediately if you notice any unusual odors, if the
product is abnormally hot, or if the product starts smoking.
7. When disposing of the product, treat it as industrial waste.
Precautions for Correct Use
Always observe the following precautions to prevent operation failures, malfunctions, and adverse effects on
performance and equipment.
1. Installation Environment
Install the product in the following locations:
• Locations not subject to corrosive gas, dust, metallic powder, or salt.
• Locations within the specified operating temperature range.
• Locations not subject to rapid changes in temperature (with no condensation).
• Locations within the specified humidity range.
• Locations not subject to direct vibration or shock outside the specified ranges.
• Locations not subject to water, oil, or chemicals.
2. Installation
• The product communicates with Data Carriers using the 530-kHz frequency band. Some motors,
inverters, switching power supplies, and other devices generate noise that can affect communications with the Data Carriers. If such devices are located near the Data Carriers, communications
with the Data Carriers may be adversely affected or the Data Carriers may be destroyed. Whenever
using the product near devices of this nature, always test operation in advance to confirm if the system will be affected.
• Observe the following precautions to minimize the effects of normal noise.
(1) Ground all metal objects in the vicinity to 100 Ω or less.
(2) Do not use the system near high-voltage or high-current lines.
• Connectors are not waterproof. Do not use the product where mists are present.
• Do not use chemicals that would affect the materials used in the product.
• Always be sure the USB connector is properly inserted when using the USB port.
3. Cleaning
• Do not clean the product with thinners, benzene, or other organic solvents. These will dissolve the
resin parts and coating on the case.
RFID System
User's Manual
Introduction
Introduction
How to Read this Manual
How to Read this Manual
Meanings of Symbols
Indicates particularly important points related to a function, including precautions and application advice.
Indicates page numbers containing relevant information.
Indicates reference to helpful information and explanations for difficult terminology.
RFID System
User's Manual
Introduction
Introduction
Table of Contents
Meanings of Signal Words
Meanings of Alert Symbols
Alert statements in this Manual
Precautions for Safe Use
Precautions for Correct Use
How to Read this Manual
Table of Contents
Section 1 Product Overview
Features
10
Names and Functions of Components
11
System Configuration
12
Operation Flowchart
13
Section 2 Communications Preparations
15
Connections
16
Installing the USB Driver
17
Communications Test
26
Section 3 Commands
29
Communications with the Data Carrier
30
Command and Response Format
34
Communications Commands
38
Communications Subcommands
77
Host Commands
78
Evaluation Commands
79
Other Commands
81
End code List
82
RFID System
User’s Manual
Introduction
Introduction
Section 4 Functions
Hand-held Reader Writer Functions
84
Data Carrier
85
Section 5 Troubleshooting
95
Error Tables
96
Troubleshooting Flowchart
97
Section 6 Appendices
83
99
Specifications and Dimensions
100
Data Carrier Memory Map
106
Data Carrier Memory Capacity and Data Type (V600 Series)
107
List of ASCII Characters
108
Degree of Protection
109
Revision History
111
RFID System
User’s Manual
Section 1
Section 1
Product Overview
10
Names and Functions of Components
11
System Configuration
12
Operation Flowchart
13
RFID System
User’s Manual
Product Overview
Features
The V680-CHUD, V680-CH1D, and V680-CH1D-PSI Hand-held Reader Writer incorporates a V680-series
Antenna and Controller into a compact device. Tag can be read from or written to the Tag simply by
approaching or touching the Tag with the Hand-held Reader Writer.
Psion Teklogix
7525S-series
For V680-CH1D-PSI
Recommended hand-held
portable data terminal
Model V600-A7525S-XX
Personal computer
Hand-held Reader Writer
Tags
■V680-CHUD
The Hand-held Reader Writer in accordance with USB 1.1. It is possible to use it by connecting it with the
personal computer and the hand-held portable data terminal as excellent Reader Writer in the portability and
operativeness.
■V680-CH1D
The RS-232C interface is built into, and the personal computer and PLC, etc. can be connected.
■V680-CH1D-PSI
The RS-232C interface is built into, and it is possible to use it by connecting it with the hand-held portable
data terminal as excellent Reader Writer in the portability and operativeness.
V680-CH1D
●Reset button
If the reset button is held for 2 seconds or more during startup, the
Hand-held Reader Writer will go into stand-by state to initialize the
setting.
●AC adapter Insertion Point
This is a dedicated AC adapter connection jack.
●Interface Connector
This is a 9-pin D-sub connector serial interface based on RS-232C.
11-2
V680-CH1D-PSI
●Reset button
If the reset button is held for 2 seconds or more during startup, the
Hand-held Reader Writer will go into stand-by state to initialize the
setting.
●Interface Connector
This is a 9-pin D-sub connector serial interface based on RS-232C.
11-3
Section 1
Product Overview
MEMO
Section 1 Operation Flowchart
14
RFID System
User’s Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:10:24 12:50:35+09:00
Create Date                     : 2007:10:24 12:50:04+09:00
Title                           : V600-CHUD RFID System User's Manual
Author                          : Omron
Creator                         : FrameMaker 6.0
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 16
Mod Date                        : 2007:10:24 12:50:35+09:00
Creation Date                   : 2007:10:24 12:50:04+09:00
Metadata Date                   : 2007:10:24 12:50:35+09:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools