Omron RFID Business Development Department V680-CHXD RFID Reader/Writer User Manual V600 CHUD RFID System User s Manual

Omron Corporation, RFID Business Development Department RFID Reader/Writer V600 CHUD RFID System User s Manual

Contents

Manual 1

RFID System V680 Series User’s Manual Hand-held Reader/Writer V680-CHUD V680-CH1D V680-CH1D-PSI ID Tags V680 Series PRELIMINARY
2IntroductionRFID SystemUser's ManualIntroductionREAD AND UNDERSTAND THIS DOCUMENTPlease read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.WARRANTYOMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)from date of sale by OMRON.OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, ORFITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HASDETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHERWARRANTIES, EXPRESS OR IMPLIED.LIMITATIONS OF LIABILITYOMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS INANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICTLIABILITY.In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’SANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TOCONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.SUITABILITY FOR USETHE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OFPERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer toseparate catalogs for OMRON's safety rated products.OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’sapplication or use of the product.At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to theproducts. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,machine, system, or other application or use.The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible usesof the products, nor is it intended to imply that the uses listed may be suitable for the products:• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safetyequipment, and installations subject to separate industry or government regulations.• Systems, machines, and equipment that could present a risk to life or property.Please know and observe all prohibitions of use applicable to the products.NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEMAS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THEINTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.PERFORMANCE DATAPerformance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent theresult of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warrantyand Limitations of Liability.CHANGE IN SPECIFICATIONSProduct specifications and accessories may be changed at any time based on improvements and other reasons.It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However,some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish keyspecifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchasedproducts.DIMENSIONS AND WEIGHTSDimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.ERRORS AND OMISSIONSThe information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical,or proofreading errors, or omissions.PROGRAMMABLE PRODUCTSOMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.COPYRIGHT AND COPY PERMISSIONThis document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use inconjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmittingthis document to another, please copy or transmit it in its entirety.
3RFID SystemUser's ManualIntroductionMeanings of Signal WordsIntroductionThe following signal words are used in this manual.The following alert symbols are used in this manual.The following alert statements apply to the products in this manual. Each alert statement also appears at the locationsneeded in this manual to attract your attention.Meanings of Signal WordsIndicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally, there may be significant property damage.Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage. Meanings of Alert SymbolsIndicates the possibility of explosion under specific conditions.Indicates general prohibitions for which there is no spacific symbol.Alert statements in this ManualThis product is not designed to be used either directly or indirectly in applications that detecthuman presence for the purpose of maintaining safety. Do not use this product as a sensing devicefor protecting human lives.A lithium battery is built into SRAM Data Carriers and may occasionally combust, explode, or burnif not treated properly. Dispose of SRAM Data Carriers as industrial waste and never disassemble,apply pressure that would deform, heat to higher than 100°C, or incinerate SRAM Data Carriers.WARNINGCAUTIONWARNING
5RFID SystemUser's ManualIntroductionRegulations and StandardsIntroductionObserve the following precautions to ensure safe use of the product. 1. Do not use the product in environments with flammable, explosive, or corrosive gasses. 2. Do not attempt to disassemble, repair, or modify the product.3. The USB driver must be installed in the personal computer before connecting the V600-CHUD to apersonal computer. 4. Do not subject cables to excessive loads. 5. Observe all warnings and precautions given in the body of this manual. 6. Discontinue usage and turn OFF the power supply immediately if you notice any unusual odors, if theproduct is abnormally hot, or if the product starts smoking.7. When disposing of the product, treat it as industrial waste. Always observe the following precautions to prevent operation failures, malfunctions, and adverse effects onperformance and equipment. 1. Installation Environment Install the product in the following locations: • Locations not subject to corrosive gas, dust, metallic powder, or salt. • Locations within the specified operating temperature range. • Locations not subject to rapid changes in temperature (with no condensation).• Locations within the specified humidity range. • Locations not subject to direct vibration or shock outside the specified ranges. • Locations not subject to water, oil, or chemicals. 2. Installation•The product communicates with Data Carriers using the 530-kHz frequency band. Some motors,inverters, switching power supplies, and other devices generate noise that can affect communica-tions with the Data Carriers. If such devices are located near the Data Carriers, communicationswith the Data Carriers may be adversely affected or the Data Carriers may be destroyed. Wheneverusing the product near devices of this nature, always test operation in advance to confirm if the sys-tem will be affected. •Observe the following precautions to minimize the effects of normal noise. (1) Ground all metal objects in the vicinity to 100 Ω or less. (2) Do not use the system near high-voltage or high-current lines. •Connectors are not waterproof. Do not use the product where mists are present. •Do not use chemicals that would affect the materials used in the product. •Always be sure the USB connector is properly inserted when using the USB port. 3. Cleaning•Do not clean the product with thinners, benzene, or other organic solvents. These will dissolve theresin parts and coating on the case. Precautions for Safe UsePrecautions for Correct Use
6IntroductionHow to Read this ManualRFID SystemUser's ManualIntroductionHow to Read this ManualMeanings of SymbolsIndicates particularly important points related to a function, including precautions and application advice.Indicates page numbers containing relevant information.Indicates reference to helpful information and explanations for difficult terminology.
7RFID SystemUser’s ManualIntroductionIntroductionTable of ContentsMeanings of Signal Words 3Meanings of Alert Symbols 3Alert statements in this Manual 3Precautions for Safe Use 5Precautions for Correct Use 5How to Read this Manual 6Table of Contents 7Section 1 Product Overview 9Features 10Names and Functions of Components 11System Configuration 12Operation Flowchart 13Section 2 Communications Preparations 15Connections 16Installing the USB Driver 17Communications Test 26Section 3 Commands 29Communications with the Data Carrier 30Command and Response Format 34Communications Commands 38Communications Subcommands 77Host Commands 78Evaluation Commands 79Other Commands 81End code List 82
8RFID SystemUser’s ManualIntroductionIntroductionSection 4 Functions 83Hand-held Reader Writer Functions 84Data Carrier 85Section 5 Troubleshooting 95Error Tables 96Troubleshooting Flowchart 97Section 6 Appendices 99Specifications and Dimensions 100Data Carrier Memory Map 106Data Carrier Memory Capacity and Data Type (V600 Series) 107List of ASCII Characters 108Degree of Protection 109Revision History 111
Section 1 Product Overview9RFID SystemUser’s ManualSection 1Product OverviewFeatures 10Names and Functions of Components 11System Configuration 12Operation Flowchart 13
The V680-CHUD, V680-CH1D, and V680-CH1D-PSI Hand-held Reader Writer incorporates a V680-seriesAntenna and Controller into a compact device. Tag can be read from or written to the Tag simply byapproaching or touching the Tag with the Hand-held Reader Writer.Personal computerHand-held Reader WriterTagsPsion Teklogix7525S-seriesFor V680-CH1D-PSIRecommended hand-heldportable data terminalModel V600-A7525S-XX■V680-CHUDThe Hand-held Reader Writer in accordance with USB 1.1. It is possible to use it by connecting it with thepersonal computer and the hand-held portable data terminal as excellent Reader Writer in the portability andoperativeness.■V680-CH1DThe RS-232C interface is built into, and the personal computer and PLC, etc. can be connected.■V680-CH1D-PSIThe RS-232C interface is built into, and it is possible to use it by connecting it with the hand-held portabledata terminal as excellent Reader Writer in the portability and operativeness.
11-2V680-CH1D●Reset buttonIf the reset button is held for 2 seconds or more during startup, theHand-held Reader Writer will go into stand-by state to initialize thesetting.●AC adapter Insertion PointThis is a dedicated AC adapter connection jack.●Interface ConnectorThis is a 9-pin D-sub connector serial interface based on RS-232C.
11-3V680-CH1D-PSI●Reset buttonIf the reset button is held for 2 seconds or more during startup, theHand-held Reader Writer will go into stand-by state to initialize thesetting.●Interface ConnectorThis is a 9-pin D-sub connector serial interface based on RS-232C.
14Section 1 Operation FlowchartRFID SystemUser’s ManualSection 1Product OverviewMEMO

Navigation menu