On Track Innovations OTI-SAT6700 Ultra-compact, multi-purpose NFC reader User Manual UNO Specifications
On Track Innovations Ltd Ultra-compact, multi-purpose NFC reader UNO Specifications
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2992988 |
| Application ID | PP9AhiZ0Yxdtosnxb6pn2w== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 108.49kB (1356084 bits) |
| Date Submitted | 2016-05-17 00:00:00 |
| Date Available | 2016-05-18 00:00:00 |
| Creation Date | 2016-05-16 16:01:19 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2016-05-17 10:42:36 |
| Document Title | UNO Specifications |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | Aharon Binur |
UNO Specifications Version 1.9 Notice This manual contains intellectual property including, but not limited to, trade secrets and know-how, operation procedures and production procedures that belong solely to oti. Disclosure, use, and/or production of any part of the above are strictly forbidden, except under a written license from oti. Confidential & Proprietary Version 1.9 Uno Specifications FCC Compliance Version 1.9 FCC Compliance This device (Saturn 6700) complies with Part 15, of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15, subpart C of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications in this equipment, not expressly approved by the party responsible for compliance (On Track Innovations Ltd,) could void the user’s authority to operate the equipment. FCC ID: JNX-OTI-SAT6700 Responsible Party: On Track Innovations LTD.. Z.H.R Industrial Zone. Rosh Pina 12000 ISRAEL Phone: +972-4-6868000 Email: Supportoti@otiglobal.com Confidential & Proprietary Page 1 Uno Specifications Table of Contents Version 1.9 Table of Contents FCC COMPLIANCE ......................................................................................................................................1 TABLE OF CONTENTS ................................................................................................................................2 TABLE OF FIGURES ....................................................................................................................................3 VERSIONS TABLE ........................................................................................................................................4 INTRODUCTION ..................................................................................................................................5 1.1 1.2 CERTIFIED AND SUPPORTED APPLICATIONS......................................................................................6 SUPPORTED STANDARDS ..................................................................................................................7 BASIC CONTACTLESS OPERATION ..............................................................................................8 TECHNICAL SPECIFICATIONS .......................................................................................................9 3.1 3.2 PRODUCT FEATURES .........................................................................................................................9 PRODUCT TECHNICAL SPECIFICATIONS ..........................................................................................10 READER MODELS ............................................................................................................................. 12 4.1 RS232 MODEL ................................................................................................................................ 12 4.2 USB MODEL ...................................................................................................................................12 4.3 INTERFACE CABLES.........................................................................................................................13 4.3.1 RS232 cable ............................................................................................................................... 13 4.3.2 USB Cable .................................................................................................................................14 DIMENSIONS ......................................................................................................................................15 5.1 5.2 UNO MOUNTING................................................................................................................................ 17 6.1 6.2 6.3 FRONT VIEW ...................................................................................................................................15 SIDE VIEW ......................................................................................................................................16 ON PANEL MOUNTING ....................................................................................................................18 FLUSH MOUNTING ..........................................................................................................................20 COUNTERTOP (DESKTOP) MOUNTING ............................................................................................. 25 CONTACT US ......................................................................................................................................26 Confidential & Proprietary Page 2 Uno Specifications Table of Figures Version 1.9 Table of Figures Figure 2-1: Card Presentation ............................................................................................................8 Figure 5-1: Front View.....................................................................................................................15 Figure 5-2: Side View ......................................................................................................................16 Figure 5-3: UNO Size Scale .......................................................................................................16 Figure 6-1: Flush and On Panel Mounting ............................................................................17 Figure 6-2: UNO Mounting Studs ....................................................................................................18 Figure 6-3: UNO Panel Mounting view ...................................................................................19 Figure 6-4: UNO Panel Mounting Drilling Template ......................................................................19 Figure 6-5: UNO Flush Mounting – Front View ....................................................................20 Figure 6-6: UNO Flush Mounting – Side View ...............................................................................21 Figure 6-7: UNO Flush Mounting – Front View ....................................................................21 Figure 6-8: UNO Flush Mounting – Side View......................................................................22 Figure 6-9: UNO Flush Mounting – Angular View ...............................................................23 Figure 6-10: UNO Flush Mounting – Rear View ...................................................................24 Figure 6-11: Uno Flash Mounting - Cutout......................................................................................24 Figure 6-12: UNO Countertop (Desktop) Mounting – Front View ...................................25 Confidential & Proprietary Page 3 Uno Specifications Versions Table Version 1.9 Versions Table Version 1.1 1.2 Description First version Supporting operation voltage Date 2014-11-02 2014-11-10 of 8 - 45VDC instead of 2 15 VDC Adding a note regarding "Behind Panel" mounting Having only one thickness configuration (17mm thickness) instead of 17 or 25 mm 1.3 Reader structural update New connectors Updates about the mounting Name Moshe Cohen Moshe Cohen 2014-11-30 Moshe Cohen 2015-01-13 Moshe Cohen 2015-07-14 Aharon Binur 2015-09-29 2016-04-14 Aharon Binur Aharon Binur Avner 2016-05-10 Hemy 2016-05-16 Hemy options 1.4 New pinout for the full interface connector New pictures of the UNO prototype Update contact information of the oti America support team 1.5 New warning regarding power supply stability New warning regarding mounting on metal Replacing "flat" wording by "flush" 1.51 1.6 1.7 1.8 1.9 Decrease the input voltage range to 40Vdc Add Recommended Cutout and Drilling for installation Adding notes to FCC compliance statement. Update total power sonsumption and IP rating Add clear distinction between USB and RS232 models. 2015-12-03 Confidential & Proprietary Page 4 Uno Specifications Introduction Version 1.9 1 Introduction The UNO is an ultra-compact, certified payment NFC Reader based on oti’s field proven technology which is specifically designed for payment and mass transit applications. Its compact design enables easy integration and installation in unattended self-service payment stations, such as ATMs, AVMs, TVMs, gaming and gambling machines, kiosks, access control gates and more. The UNO uses oti’s patented matched antenna technology. The UNO supports SAM house that allows the reader to access its own or external security elements such as Mifare Authentication SAM. The UNO is designed to be seated on any counter as an attended reader or alternatively can be installed as part of an unattended vending or service machine. UNO’s plug-and-play design makes it easy to connect to any existing infrastructure and POS terminal, quickly upgrading it to contactless operations without disrupting ongoing business operations. In its USB configuration, the UNO is USB powered, this option contributes to the easy installation and maintenance of the reader. Confidential & Proprietary Page 5 Uno Specifications Introduction Version 1.9 1.1 Certified and Supported Applications The UNO is certified and supports the following contactless applications: EMV o Contactless EMV L1 VISA o VISA PayWave MSD o VISA PayWave qVSDC o NDOT over VISA for transportation o VISA Global Transit Payment Pilot Specification o VISA Pilot Visa PayWave Ticketing Extension Specification o VISA Asia Pacific WAVE 2 MasterCard o MasterCard PayPass M/Chip (including Data Exchange) o MasterCard PayPass Mag Stripe o NDOT over MasterCard for transportation American Express o AMEX ExpressPay Discover o Discover ZipNetwork Interac o Interac Flash SoftCard o SoftCard (ISIS) SmartTap Mifare o Mifare Ultralight o Mifare Classic o Mifare DESFire (optional) Transparent (Pass-Through) Communication o ISO/IEC 14443 Type A - Transparent Proximity o ISO/IEC 14443 Type B - Transparent Proximity o ISO/IEC 15693 Vicinity (optional) - Transparent Vicinity Other o Additional proprietary applications *In process of certification Confidential & Proprietary Page 6 Uno Specifications Introduction Version 1.9 1.2 Supported Standards The UNO is compatible with the following standards: FCC CE UL RoHS compliance ISO 9001: 2008 ISO/IEC 14443 Proximity Type A&B ISO/IEC 15693 Vicinity Mifare MasterCard TQM label IPX5 Confidential & Proprietary Page 7 Uno Specifications Basic Contactless Operation Version 1.9 2 Basic Contactless Operation When a valid contactless payment card is presented to the reader, the reader performs a payment transaction with the contactless card. If the transaction is accepted, the unit will display a row of 4 LEDs that light up in sequence and the reader buzzer will inform the user about the transaction verdict. The reader then communicates the transaction data to the Host (POS). A landing zone logo, lighted by the reader, on the graphic overlay indicates where the contactless card or tag should be presented. The interactive LEDs and Buzzer give the user an indication of the transaction status. Figure 2-1: Card Presentation Confidential & Proprietary Page 8 Uno Specifications Technical Specifications Version 1.9 3 Technical Specifications 3.1 Product Features General User Interface Flexible, software configurable, certified intelligent reader solution 4 LED indicators oti advanced Host – Reader TLV based protocol Contactless transparent communication support Modular design by Hardware and Software Tamper-proof remote software update Available as OEM Buzzer Electronic Board Power Requirements 8VDC - 40VDC (Onboard Switch Mode Power Supply) or 5VDC via USB connector. Max power consumption Less than 3W (RF signal on) with 8-40VDC supply. RF Interface Less than 2.5W (RF signal on) with 5VDC supply from USB bus. Bi-directional RF interface between Reader and Contactless Smart Cards SAM Interface Carrier frequency: 13.56 MHz One micro SIM Slot ISO/IEC 14443 Type A/B and Mifare full support Security Optional I-Code and ISO/IEC 15693 support High security encryption system (3DES/AES/RSA) protects the reader’s operating system Communication Links Vandalism-proof PKI protected software update mechanism USB 2.0 – full speed, CDC, mini USB connector RS 232, 8 data bits, no parity, 1 stop bit, full 8-bit binary data. Client defined baud rate DUKPT (Derived Unique Key Per Transaction) support Offline PIN Authentication support Secure boot loader (firmware update) protocol Connectors: Either a JST 10 pin ZPD interface, located in the back of the reader and contains a Power, RS232, USB and External buzzer lines. Or a mini USB connector located at the back of the reader and supports USB only. In this configuration the reader is 5VDC USB powered. Environmental Conditions Operating: -20° to 70°C (-4° to 158°F) Confidential & Proprietary Page 9 Uno Specifications Technical Specifications Version 1.9 3.2 Product Technical Specifications The performance/electrical specifications for each feature of the UNO reader are given in the table below. Table 3-1: Performance/Electrical Specifications Feature Specification RF Interface: RF Carrier Frequency 13.56 MHz RF Output 450mW ISO/IEC 14443 A&B and Mifare Full compliance ISO/IEC 15693 Vicinity Optional Micro SIM push-push Interface Communication Links: USB, RS232 USB: 2.0 Full speed CDC Standard mini-USB connector Connectors USB only Mini USB connector Full interface JST 10 pin P/N BM10B-ZPDSS Indicators: LEDs Four programmable on-board LEDs Buzzer Multi tone differential drive buzzer Electronic Board Power Requirements: 8VDC – 40VDC, Pmax<3W On-board switching power supply 5VDC, Pmax<2.5W From USB bus in USB only Mechanical: Dimensions H – 0.66” (17mm) W – 2.40” (61mm) (See Figure 5-1: Front View and D – 3.07” (78mm) Figure 5-2: Side View) Weight 125 gr. Vibrations 10 200 Hz @ 2.0G IP rating IPX5 Temperature: Operating -20°C to 70°C (-4°F to 158°F) Confidential & Proprietary Page 10 Uno Specifications Technical Specifications Version 1.9 Warning: Power supply minimum requirements Keeping the DC supply voltage within the specified allowed range is crucial to guarantee proper operation of the equipment. The use of AC rectified power supply source, which is not properly filtered, forms a risk of too low voltage dips and hence should be avoided. It is highly recommended to check this issue with proper tools (e.g. oscilloscope) during the reader installation. For more details contact oti technical team via oti’s sales representatives. Confidential & Proprietary Page 11 Uno Specifications Reader models Version 1.9 4 Reader models 4.1 RS232 model The RS232 interface is implemented using a JST 10 pin connector (JST P/N BM10B-ZPDSS). The connector exposes 10 lines according to the following: 1. RS223 Rx 2. RS232 Tx 3. USB D4. Buzser 1 5. USB D+ 6. Buzzer 2 7. GND (direct) 8. Vin 9. 5V 10. GND Ext (via common mode chock) Note: the 10 pin connector optionaly support USB communication and extranl buzzer activation. This option is not in OTI standard products portfolio. 4.2 USB model A mini-USB connector on the back of the reader provides communication to the host terminal (POS). It can be used to provide either USB or RS232 serial interface depending on the reader’s hardware configuration. DC power to the unit can be provided either through the mini-USB connector or through the power jack which is part of the communication cable. Confidential & Proprietary Page 12 Uno Specifications Reader models Version 1.9 4.3 Interface cables 4.3.1 RS232 cable A JST 10 pin connector (JST P/N BM10B-ZPDSS) is available to access the reader full interface. Figure 4-1: BM10B-ZPDSS Connector – Top Entry Type Figure 4-2: BM10B-ZPDSS Connector – Side Entry Type Figure 4-3: BM10B-ZPDSS Connector housing Confidential & Proprietary Page 13 Uno Specifications Reader models Version 1.9 4.3.2 USB Cable The USB cable (1.8m) has a mini-USB upstream connector on the reader side and a USB downstream connector on the host side. This cable can be in use while the reader is in USB only configuration. In this hardware configuration, the reader is USB powered, no additional power supply is required. Figure 4-4: USB Cable Saturn Host USB Downstream Connector Mini USB Upstream Connector 1 VCC VCC 1 D- 2 D- D+ 3 D+ GND 5 4 GND USB Cable Figure 4-5: USB Connection Confidential & Proprietary Page 14 Uno Specifications Dimensions Version 1.9 5 Dimensions The reader’s front and side view dimensions are given in this chapter. 5.1 Front View The reader’s front view is illustrated in the figure below. Figure 5-1: Front View Confidential & Proprietary Page 15 Uno Specifications Dimensions Version 1.9 5.2 Side View The reader’s side view dimensions are illustrated in the figure below. Figure 5-2: Side View Figure 5-3: UNO Size Scale Confidential & Proprietary Page 16 Uno Specifications UNO Mounting Version 1.9 6 UNO Mounting While the UNO can be placed simply on the counter as a countertop reader connected to a terminal, the UNO can also be mounted as part of an unattended machine. This chapter specifies the mounting options and procedures. The UNO mounting possibilities include 3 main options, as illustrated below: 1. On panel mounting 2. Flush mounting 3. Countertop (Desktop) mounting The different mounting configuration allows to install the UNO on top of the machine surface, leveled with the machine surface or over the counter. Figure 6-1: Flush and On Panel Mounting Warning: Mounting on metal Direct mounting of the reader on metallic/conductive panel requires special attention as it negatively affects the reader contactless performance. For more details contact oti technical team via oti’s sales representatives. Confidential & Proprietary Page 17 Uno Specifications UNO Mounting Version 1.9 6.1 On Panel Mounting The image below illustrates the UNO’s on panel mounting option. Figure 6-2: UNO Mounting Studs 1. The UNO is equipped with 4 mounting studs for front panel mounting. 2. The studs and cable are inserted through holes in the front panel. The nuts are fastened over the studs from the back of the front panel, protecting against potential attempts to dismantle the unit from the front. Confidential & Proprietary Page 18 Uno Specifications UNO Mounting Version 1.9 3. Figure 6-3: UNO Panel Mounting view Figure 6-4: UNO Panel Mounting Drilling Template Confidential & Proprietary Page 19 Uno Specifications UNO Mounting Version 1.9 6.2 Flush Mounting The image below illustrates the UNO’s flush mounting option. Figure 6-5: UNO Flush Mounting – Front View Confidential & Proprietary Page 20 Uno Specifications UNO Mounting Version 1.9 Figure 6-6: UNO Flush Mounting – Side View 1. The UNO can be mounted flush with the front panel surface. 2. The flush mounting option requires a 63x80 mm cutout in the center of the non-metallic section of the front panel. 3. A mounting holder (green) in the back of the reader is tighten the device to the panel. A gasket that is separated between the device cover and the panel keep it waterproof. Figure 6-7: UNO Flush Mounting – Front View Confidential & Proprietary Page 21 Uno Specifications UNO Mounting Version 1.9 Figure 6-8: UNO Flush Mounting – Side View Confidential & Proprietary Page 22 Uno Specifications UNO Mounting Version 1.9 Figure 6-9: UNO Flush Mounting – Angular View Confidential & Proprietary Page 23 Uno Specifications UNO Mounting Version 1.9 Figure 6-10: UNO Flush Mounting – Rear View Figure 6-11: Uno Flash Mounting - Cutout Confidential & Proprietary Page 24 Uno Specifications UNO Mounting Version 1.9 6.3 Countertop (Desktop) mounting As the product software supports both attended and unattended usage profiles, the UNO can be used also as attended reader. In order to use the UNO in its countertop configuration you should connect it to the POS using the full interface to via the USB interface and to place it over the counter or alternatively in its cradle (if available). Figure 6-12: UNO Countertop (Desktop) Mounting – Front View Confidential & Proprietary Page 25 Uno Specifications Contact Us Version 1.9 7 Contact Us For oti America Technical Support (US and Canada): Phone: +1-732-429-1900 9:00 am to 5:00 pm Eastern time Monday – Friday Email: support@otiamerica.com For oti Technical Support (International): Phone: +972-4-6868000 (Ext. 8090) Email: info@otiglobal.com Confidential & Proprietary Page 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Aharon Binur Create Date : 2016:05:16 16:01:19+03:00 Keywords : Confidential, &, Proprietary Modify Date : 2016:05:17 10:42:36+03:00 Subject : Version 1.9 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Aharon Binur Description : Version 1.9 Title : UNO Specifications Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2016:05:17 10:42:36+03:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:b764ae0e-debe-49a9-a84a-9909ab1292a5 Instance ID : uuid:fde72d20-13b1-4531-984d-9f09b821e31b Page Count : 27EXIF Metadata provided by EXIF.tools