On Track Innovations OTI-SAT8700 Ultra-compact, multi-purpose NFC reader User Manual
On Track Innovations Ltd Ultra-compact, multi-purpose NFC reader Users Manual
Users Manual
Confidential & Proprietary Version 1.3
SATURN 8700
Specifications
Version 1.3
Notice
This manual contains intellectual property including, but
not limited to, trade secrets and know-how, operation
procedures and production procedures that belong solely to
oti.
Disclosure, use, and/or production of any part of the
above are strictly forbidden, except under a written
license from oti.
Saturn 8700 Specifications Version 1.3
FCC Compliance
Confidential & Proprietary Page 1
FCC Compliance
This device (Saturn 8700) complies with Part 15, of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference received, including interference that
may cause undesired operation
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15, subpart C of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications in this equipment, not expressly approved by the
party responsible for compliance (On Track Innovations Ltd,) could void the
user’s authority to operate the equipment.
FCC ID: JNX-OTI-SAT8700
Responsible Party:
On Track Innovations LTD..
Z.H.R Industrial Zone.
Rosh Pina 12000
ISRAEL
Phone: +972-4-6868000
Email
: Supportoti@otiglobal.com
Saturn 8700 Specifications Version 1.3
Table of Contents
Confidential & Proprietary Page 2
Table of Contents
FCC COMPLIANCE ...................................................................................................................................... 1
TABLE OF CONTENTS ................................................................................................................................ 2
TABLE OF FIGURES .................................................................................................................................... 3
REVISION HISTORY .................................................................................................................................... 4
1
INTRODUCTION .................................................................................................................................. 5
1.1
C
ERTIFIED AND
S
UPPORTED
A
PPLICATIONS
...................................................................................... 6
1.3
S
UPPORTED
S
TANDARDS
.................................................................................................................. 7
2
BASIC CONTACTLESS OPERATION .............................................................................................. 8
3
TECHNICAL SPECIFICATIONS ....................................................................................................... 9
3.1
P
RODUCT
F
EATURES
......................................................................................................................... 9
3.2
P
RODUCT
T
ECHNICAL
S
PECIFICATIONS
.......................................................................................... 10
4
READER MODELS ............................................................................................................................. 12
4.1
RS232
MODEL
................................................................................................................................ 12
4.2
USB
MODEL
................................................................................................................................... 12
4.3
I
NTERFACE CABLES
......................................................................................................................... 13
4.3.1
RS232 cable ............................................................................................................................... 13
4.3.2
USB Cable ................................................................................................................................. 14
5
DIMENSIONS ...................................................................................................................................... 15
5.1
O
N
P
ANEL DIMENSIONS
.................................................................................................................. 15
5.2
F
LUSH MOUNT DIMENSIONS
............................................................................................................ 16
6
SATURN 8700 MOUNTING .............................................................................................................. 18
6.1
O
N
P
ANEL
M
OUNTING
.................................................................................................................... 19
6.2
F
LUSH
M
OUNTING
.......................................................................................................................... 21
7
CONTACT US ...................................................................................................................................... 25
Saturn 8700 Specifications Version 1.3
Table of Figures
Confidential & Proprietary Page 3
Table of Figures
Figure 1-1: SATURN 8700 ................................................................................................................ 5
Figure 2-1: SATURN 8700 landing zone and LEDs ........................................................................ 8
Figure 5-1: On Panel dimensions ..................................................................................................... 15
Figure 5-2:: Flush mount dimensions ............................................................................................... 16
Figure 5-3: SATURN 8700 Size Scale ........................................................................................... 17
Figure 6-1: Flush and On Panel Mounting ....................................................................................... 18
Figure 6-2: SATURN 8700 Mounting Studs .................................................................................. 19
Figure 6-3: SATURN 8700 Panel Mounting view ........................................................................... 20
Figure 6-4: SATURN 8700 Panel Mounting Drilling Template ..................................................... 20
Figure 6-5: SATURN 8700 Flush Mount ....................................................................................... 21
Figure 6-6: SATURN 8700 Flush Mounting – Top View .............................................................. 22
Figure 6-7: SATURN 8700 Flush Mounting – Side View .............................................................. 23
Figure 6-9: SATURN 8700 Flush Mounting – Rear View ............................................................. 24
Figure 6-10: SATURN 8700 Flash Mounting - Cutout .................................................................. 24
Saturn 8700 Specifications Version 1.3
Revision history
Confidential & Proprietary Page 4
Revision history
Version Description Date
1.1 First version 28-June-2016
1.2 Updated photos, dimensions and technical specifications 10-July-2016
1.3 Add official models names (RS232, USB) at page 12.
Minor text modifications.
11-July-2016
Saturn 8700 Specifications Version 1.3
Introduction
Confidential & Proprietary Page 5
1 Introduction
The SATURN 8700 is an ultra-compact, certified payment NFC Reader based on oti’s field proven
technology which is specifically designed for payment and mass transit applications. Its compact
design enables easy integration and installation in unattended self-service payment stations, such
as ATMs, AVMs, TVMs, gaming and gambling machines, kiosks, access control gates and more.
The SATURN 8700 supports two SAM slots allowing the reader to access its own or external
security elements such as Mifare Authentication SAM.
The SATURN 8700 is designed to be seated on any counter as an attended reader or alternatively
can be installed as part of an unattended vending or service machine.
Three mounting options are available, PM (Panel Mount), FM (Flush Mount) and CM
(Countertop Mounting), supporting various add-on mounting requirements.
SATURN 8700’s plug-and-play design makes it easy to connect to any existing infrastructure and
POS terminal, quickly upgrading it to contactless operations without disrupting ongoing business
operations. In its USB configuration, the SATURN 8700 is USB powered, this option contributes
to the easy installation and maintenance of the reader.
Figure 1-1: SATURN 8700 (PM)
Saturn 8700 Specifications Version 1.3
Introduction
Confidential & Proprietary Page 6
1.1 Certified and Supported Applications
The SATURN 8700 is certified and supports the following contactless applications:
EMV
o Contactless EMV L1
VISA
o EMVCo L2 Book C-3 Kernel 3
MasterCard
o EMVCo L2 Book C-2 Kernel 2
American Express
o EMVCo L2 Book C-4 Kernel 4
Discover
o Discover ZipNetwork
Interac
o Interac Flash
SoftCard
o SoftCard (ISIS) SmartTap
Apple Pay
Android Pay
Mifare
o Mifare Ultralight
o Mifare Classic
o Mifare DESFire
Transparent (Pass-Through) Communication
o ISO/IEC 14443 Type A - Transparent Proximity
o ISO/IEC 14443 Type B - Transparent Proximity
o ISO/IEC 15693 Vicinity (optional) - Transparent Vicinity
Felica
o Felica JIS: X6319-4
NFC IP1 ISO 18092
o Initiator
o Target (active only)
Other
o Additional proprietary applications
Saturn 8700 Specifications Version 1.3
Introduction
Confidential & Proprietary Page 7
1.2 Supported Standards
The SATURN 8700 is compatible with the following standards:
FCC
CE
UL
RoHS compliance
ISO 9001: 2008
ISO/IEC 18092 NFC IP1
ISO/IEC 14443 Proximity Type A&B
ISO/IEC 15693 Vicinity
Mifare
MasterCard TQM label
IPX5
Saturn 8700 Specifications Version 1.3
Basic Contactless Operation
Confidential & Proprietary Page 8
2 Basic Contactless Operation
When a valid contactless payment card is presented to the reader, the reader performs a payment
transaction with the contactless card. If the transaction is accepted, the unit will display a row of 4
LEDs that light up in sequence and the reader buzzer will inform the user about the transaction
verdict. The reader then communicates the transaction data to the Host (POS).
A landing zone logo, lighted by the reader, on the graphic overlay indicates where the contactless
card or tag should be presented.
The interactive LEDs and Buzzer give the user an indication of the transaction status.
Figure 2-1: SATURN 8700 landing zone and LEDs
Saturn 8700 Specifications Version 1.3
Technical Specifications
Confidential & Proprietary Page 9
3 Technical Specifications
3.1 Product Features
General
Flexible, software configurable, certified
intelligent reader solution
oti advanced Host – Reader TLV based
protocol
Contactless transparent communication
support
Modular design by Hardware and Software
Tamper-proof remote software update
Available as OEM
RF Interface
Bi-directional RF interface between Reader
and Contactless devices
Carrier frequency: 13.56 MHz
Data rate: Up to 848Kbs
Communication Links
USB 2.0 – full speed, CDC, mini USB
connector
RS 232, 8 data bits, no parity, 1 stop bit, full
8-bit binary data. Client defined baud rate
Connectors:
Either a JST 10 pin ZPD interface, located in
the back of the reader and contains a Power,
RS232, USB and External buzzer lines.
Or a mini USB connector located at the back
of the reader and supports USB only. In this
configuration the reader is 5VDC USB
powered.
User Interface
Push Button: x2
4 Payment indication LEDs: Monochrome
Contactless logo: RGB
Audio: Speaker
IN/OUT Signals:
Audio OUT
Digital IN
Digital OUT
Power Requirements
8VDC - 40VDC (Onboard Switch Mode
Power Supply) or 5VDC via USB connector
Max power consumption
Less than 3W (RF signal on) with 8-40VDC
supply
Less than 2.5W (RF signal on) with 5VDC
supply from USB bus
SAM Interface
Two micro SIM Slots
Security
High security encryption system
(3DES/AES/RSA) protects the reader’s
operating system
Vandalism-proof PKI protected software
update mechanism
DUKPT (Derived Unique Key Per
Transaction) support
Offline PIN Authentication support
Secure boot loader (firmware update)
protocol
Saturn 8700 Specifications Version 1.3
Technical Specifications
Confidential & Proprietary Page 10
3.2 Product Technical Specifications
The performance/electrical specifications for each feature of the SATURN 8700 reader
are given in the table below.
Table 3-1: Performance/Electrical Specifications
Feature Specification
RF Interface:
RF Carrier Frequency 13.56 MHz
RF Output 450mW (@50ohm load)
Micro SIM push-push Interface
Communication Links:
USB, RS232
USB:
2.0 Full speed CDC
Connectors Standard mini-USB connector
USB only Mini USB connector
Full interface JST 10 pin P/N BM10B-ZPDSS
Indicators:
Monochrome LED Four programmable on-board LEDs
RGB LED Contactless logo illumination
Audio speaker Multi tone differential drive buzzer
Electronic Board Power Requirements:
8VDC – 40VDC, Pmax<3W On-board switching power supply
5VDC, Pmax<2.5W From USB bus in USB only
Mechanical:
Dimensions (On panel / Flush)
(See Figure 5-1and Figure 5-2)
H – 78.6 / 85.4 mm
W – 61.0 / 67.8 mm
D – 21.3 / 21.3 mm
Weight 125 gr.
Temperature:
Operating -20°C to 70°C (-4°F to 158°F)
Environment:
IP rating IPX5
Vibrations 10 200 Hz @ 2.0G
Static pressure Front panel: >50N/cm
2
Side panels: >100N/cm
2
Saturn 8700 Specifications Version 1.3
Technical Specifications
Confidential & Proprietary Page 11
Warning:
Power supply minimum requirements
Keeping the DC supply voltage within the specified allowed range is crucial to
guarantee proper operation of the equipment. The use of AC rectified power
supply source, which is not properly filtered, forms a risk of too low voltage
dips and hence should be avoided. It is highly recommended to check this issue
with proper tools (e.g. oscilloscope) during the reader installation. For more
details contact oti technical team via oti’s sales representatives.
Saturn 8700 Specifications Version 1.3
Reader models
Confidential & Proprietary Page 12
4 Reader models
4.1 SATURN 8700 RS232
The RS232 interface is implemented using a JST 10 pin connector (JST P/N BM10B-ZPDSS).
Connector pin designation:
1. RS223 Rx
2. RS232 Tx
3. USB D-
4. Buzzer 1
5. USB D+
6. Buzzer 2
7. GND (direct)
8. Vin
9. 5V
10. GND Ext (via common mode choke)
Note: USB communication and external buzzer activation are not in OTI's standard
products portfolio.
4.2 SATURN 8700 USB
The USB model has a mini-USB connector on the back in the panel mount options or at the bottom
of the reader in the desk top models. The USB connector provides communication and power to
the reader.
Note: Both models are available in either PM or FM housing options. The CM housing support
only teh USB model.
Saturn 8700 Specifications Version 1.3
Reader models
Confidential & Proprietary Page 13
4.3 Interface cables
4.3.1 RS232 cable
A JST 10 pin connector (JST P/N BM10B-ZPDSS) is available to access the reader full interface.
Figure 4-1: BM10B-ZPDSS Connector – Top Entry Type
Figure 4-2: BM10B-ZPDSS Connector – Side Entry Type
Figure 4-3: BM10B-ZPDSS Connector housing
Saturn 8700 Specifications Version 1.3
Reader models
Confidential & Proprietary Page 14
4.3.2 USB Cable
The USB cable (1.8m) has a mini-USB upstream connector on the reader side and a USB
downstream connector on the host side.
In this hardware configuration, the reader is USB powered, no additional power supply is required.
Figure 4-4: USB Cable
Figure 4-5: USB Connection
Saturn 8700 Specifications Version 1.3
Dimensions
Confidential & Proprietary Page 15
5 Dimensions
The reader’s front and side view dimensions are given in this chapter.
All the dimensions are in millimeters.
5.1 On Panel dimensions
Figure 5-1: On Panel dimensions
Saturn 8700 Specifications Version 1.3
Dimensions
Confidential & Proprietary Page 16
5.2 Flush mount dimensions
Figure 5-2:: Flush mount dimensions
Saturn 8700 Specifications Version 1.3
Dimensions
Confidential & Proprietary Page 17
Figure 5-3: SATURN 8700 Size Scale
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 18
6 SATURN 8700 Mounting
While the SATURN 8700 can be placed simply on the counter as a countertop reader connected to
a terminal. It can also be mounted on an unattended devices such as ATM's and Vending
Machines. This chapter describes the mounting options and procedures.
The SATURN 8700 mounting possibilities include 3 main options, as illustrated below:
1. PM - on panel mounting. Rear RS232/USB cable connection.
2. FM - flush mounting inside cutout in the panel. Rear RS232/USB cable
connection.
3. CM - Countertop (Desktop) mounting. PM with side USB cable connection.
Different reader configuration allow mounting on the machine surface, flush with the machine
surface or on the counter.
Figure 6-1: Flush and On Panel Mounting
Warning: Mounting on metal
Direct mounting of the reader on metallic/conductive panel requires special
attention as it negatively affects the reader contactless performance. For more
details contact oti technical team via oti’s sales representatives.
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 19
6.1 On Panel Mounting
The image below illustrates the SATURN 8700’s on panel mounting option.
Figure 6-2: SATURN 8700 Mounting Studs
1. The SATURN 8700 is equipped with 4 mounting studs for front panel mounting.
2. The studs and cable are inserted through holes in the front panel. The nuts are fastened over
the studs from the back of the front panel, protecting against potential attempts to dismantle
the unit from the front.
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 20
Figure 6-3: SATURN 8700 Panel Mounting view
Figure 6-4: SATURN 8700 Panel Mounting Drilling Template
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 21
6.2 Flush Mounting
The image below illustrates the SATURN 8700’s flush mounting option.
Figure 6-5: SATURN 8700 Flush Mount
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 22
Figure 6-6: SATURN 8700 Flush Mounting – Top View
1. The SATURN 8700 can be mounted flush with the front panel surface.
2. The flush mounting option requires a 63x80 mm cutout in the center of the non-metallic
section of the front panel.
3. A mounting holder (green) in the back of the reader is tighten the device to the panel. A gasket
that is separated between the device cover and the panel keep it waterproof.
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 23
Figure 6-7: SATURN 8700 Flush Mounting – Side View
Saturn 8700 Specifications Version 1.3
SATURN 8700 Mounting
Confidential & Proprietary Page 24
Figure 6-8: SATURN 8700 Flush Mounting – Rear View
Figure 6-9: SATURN 8700 Flash Mounting - Cutout
Saturn 8700 Specifications Version 1.3
Contact Us
Confidential & Proprietary Page 25
7 Contact Us
For oti America Technical Support (US and Canada):
Phone: +1-732-429-1900 9:00 am to 5:00 pm Eastern time
Monday – Friday
Email: support@otiamerica.com
For oti Technical Support (International):
Phone: +972-4-6868000 (Ext. 8090)
Email: info@otiglobal.com