On Track Innovations OTI-SAT8700 Ultra-compact, multi-purpose NFC reader User Manual
On Track Innovations Ltd Ultra-compact, multi-purpose NFC reader Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3064907 |
| Application ID | aYmN+7XYA1rDBRaHSNqx9g== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.55kB (569325 bits) |
| Date Submitted | 2016-07-15 00:00:00 |
| Date Available | 2016-07-20 00:00:00 |
| Creation Date | 2017-12-10 03:11:12 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-10 03:11:12 |
| Document Title | Microsoft Word - SATURN 8700 UNO Specifications V1.3 11July2016.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Marina |
SATURN 8700 Specifications Version 1.3 Notice This manual contains intellectual property including, but not limited to, trade secrets and know-how, operation procedures and production procedures that belong solely to oti. Disclosure, use, and/or production of any part of the above are strictly forbidden, except under a written license from oti. Confidential & Proprietary Version 1.3 Saturn 8700 Specifications FCC Compliance Version 1.3 FCC Compliance This device (Saturn 8700) complies with Part 15, of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15, subpart C of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications in this equipment, not expressly approved by the party responsible for compliance (On Track Innovations Ltd,) could void the user’s authority to operate the equipment. FCC ID: JNX-OTI-SAT8700 Responsible Party: On Track Innovations LTD.. Z.H.R Industrial Zone. Rosh Pina 12000 ISRAEL Phone: +972-4-6868000 Email: Supportoti@otiglobal.com Confidential & Proprietary Page 1 Saturn 8700 Specifications Table of Contents Version 1.3 Table of Contents FCC COMPLIANCE ......................................................................................................................................1 TABLE OF CONTENTS ................................................................................................................................2 TABLE OF FIGURES ....................................................................................................................................3 REVISION HISTORY ....................................................................................................................................4 INTRODUCTION ..................................................................................................................................5 1.1 1.3 CERTIFIED AND SUPPORTED APPLICATIONS......................................................................................6 SUPPORTED STANDARDS ..................................................................................................................7 BASIC CONTACTLESS OPERATION ..............................................................................................8 TECHNICAL SPECIFICATIONS .......................................................................................................9 3.1 3.2 PRODUCT FEATURES .........................................................................................................................9 PRODUCT TECHNICAL SPECIFICATIONS ..........................................................................................10 READER MODELS .............................................................................................................................12 4.1 RS232 MODEL ................................................................................................................................12 4.2 USB MODEL ...................................................................................................................................12 4.3 INTERFACE CABLES .........................................................................................................................13 4.3.1 RS232 cable ...............................................................................................................................13 4.3.2 USB Cable .................................................................................................................................14 DIMENSIONS ......................................................................................................................................15 5.1 5.2 SATURN 8700 MOUNTING ..............................................................................................................18 6.1 6.2 ON PANEL DIMENSIONS ..................................................................................................................15 FLUSH MOUNT DIMENSIONS ............................................................................................................16 ON PANEL MOUNTING ....................................................................................................................19 FLUSH MOUNTING ..........................................................................................................................21 CONTACT US ......................................................................................................................................25 Confidential & Proprietary Page 2 Saturn 8700 Specifications Table of Figures Version 1.3 Table of Figures Figure 1-1: SATURN 8700 ................................................................................................................5 Figure 2-1: SATURN 8700 landing zone and LEDs ........................................................................8 Figure 5-1: On Panel dimensions .....................................................................................................15 Figure 5-2:: Flush mount dimensions...............................................................................................16 Figure 5-3: SATURN 8700 Size Scale ...........................................................................................17 Figure 6-1: Flush and On Panel Mounting .......................................................................................18 Figure 6-2: SATURN 8700 Mounting Studs ..................................................................................19 Figure 6-3: SATURN 8700 Panel Mounting view ...........................................................................20 Figure 6-4: SATURN 8700 Panel Mounting Drilling Template .....................................................20 Figure 6-5: SATURN 8700 Flush Mount .......................................................................................21 Figure 6-6: SATURN 8700 Flush Mounting – Top View ..............................................................22 Figure 6-7: SATURN 8700 Flush Mounting – Side View ..............................................................23 Figure 6-9: SATURN 8700 Flush Mounting – Rear View .............................................................24 Figure 6-10: SATURN 8700 Flash Mounting - Cutout ..................................................................24 Confidential & Proprietary Page 3 Saturn 8700 Specifications Revision history Version 1.3 Revision history Version Description Date 1.1 First version 28-June-2016 1.2 Updated photos, dimensions and technical specifications 10-July-2016 1.3 Add official models names (RS232, USB) at page 12. Minor text modifications. 11-July-2016 Confidential & Proprietary Page 4 Saturn 8700 Specifications Introduction Version 1.3 1 Introduction The SATURN 8700 is an ultra-compact, certified payment NFC Reader based on oti’s field proven technology which is specifically designed for payment and mass transit applications. Its compact design enables easy integration and installation in unattended self-service payment stations, such as ATMs, AVMs, TVMs, gaming and gambling machines, kiosks, access control gates and more. The SATURN 8700 supports two SAM slots allowing the reader to access its own or external security elements such as Mifare Authentication SAM. The SATURN 8700 is designed to be seated on any counter as an attended reader or alternatively can be installed as part of an unattended vending or service machine. Three mounting options are available, PM (Panel Mount), FM (Flush Mount) and CM (Countertop Mounting), supporting various add-on mounting requirements. SATURN 8700’s plug-and-play design makes it easy to connect to any existing infrastructure and POS terminal, quickly upgrading it to contactless operations without disrupting ongoing business operations. In its USB configuration, the SATURN 8700 is USB powered, this option contributes to the easy installation and maintenance of the reader. Figure 1-1: SATURN 8700 (PM) Confidential & Proprietary Page 5 Saturn 8700 Specifications Introduction 1.1 Version 1.3 Certified and Supported Applications The SATURN 8700 is certified and supports the following contactless applications: EMV o Contactless EMV L1 VISA o EMVCo L2 Book C-3 Kernel 3 MasterCard o EMVCo L2 Book C-2 Kernel 2 American Express o EMVCo L2 Book C-4 Kernel 4 Discover o Discover ZipNetwork Interac o Interac Flash SoftCard o SoftCard (ISIS) SmartTap Apple Pay Android Pay Mifare o Mifare Ultralight o Mifare Classic o Mifare DESFire Transparent (Pass-Through) Communication o ISO/IEC 14443 Type A - Transparent Proximity o ISO/IEC 14443 Type B - Transparent Proximity o ISO/IEC 15693 Vicinity (optional) - Transparent Vicinity Felica o Felica JIS: X6319-4 NFC IP1 ISO 18092 o Initiator o Target (active only) Other o Additional proprietary applications Confidential & Proprietary Page 6 Saturn 8700 Specifications Introduction Version 1.3 1.2 Supported Standards The SATURN 8700 is compatible with the following standards: FCC CE UL RoHS compliance ISO 9001: 2008 ISO/IEC 18092 NFC IP1 ISO/IEC 14443 Proximity Type A&B ISO/IEC 15693 Vicinity Mifare MasterCard TQM label IPX5 Confidential & Proprietary Page 7 Saturn 8700 Specifications Basic Contactless Operation Version 1.3 2 Basic Contactless Operation When a valid contactless payment card is presented to the reader, the reader performs a payment transaction with the contactless card. If the transaction is accepted, the unit will display a row of 4 LEDs that light up in sequence and the reader buzzer will inform the user about the transaction verdict. The reader then communicates the transaction data to the Host (POS). A landing zone logo, lighted by the reader, on the graphic overlay indicates where the contactless card or tag should be presented. The interactive LEDs and Buzzer give the user an indication of the transaction status. Figure 2-1: SATURN 8700 landing zone and LEDs Confidential & Proprietary Page 8 Saturn 8700 Specifications Technical Specifications Version 1.3 3 Technical Specifications 3.1 Product Features General User Interface Flexible, software configurable, certified intelligent reader solution Push Button: x2 oti advanced Host – Reader TLV based protocol Contactless transparent communication support 4 Payment indication LEDs: Monochrome Contactless logo: RGB Audio: Speaker IN/OUT Signals: Modular design by Hardware and Software Tamper-proof remote software update Audio OUT Digital IN Digital OUT Available as OEM Power Requirements RF Interface 8VDC - 40VDC (Onboard Switch Mode Power Supply) or 5VDC via USB connector Bi-directional RF interface between Reader and Contactless devices Carrier frequency: 13.56 MHz Max power consumption Less than 3W (RF signal on) with 8-40VDC supply Data rate: Up to 848Kbs Less than 2.5W (RF signal on) with 5VDC supply from USB bus Communication Links USB 2.0 – full speed, CDC, mini USB connector RS 232, 8 data bits, no parity, 1 stop bit, full 8-bit binary data. Client defined baud rate Connectors: Either a JST 10 pin ZPD interface, located in the back of the reader and contains a Power, RS232, USB and External buzzer lines. Or a mini USB connector located at the back of the reader and supports USB only. In this configuration the reader is 5VDC USB powered. SAM Interface Two micro SIM Slots Security High security encryption system (3DES/AES/RSA) protects the reader’s operating system Vandalism-proof PKI protected software update mechanism DUKPT (Derived Unique Key Per Transaction) support Offline PIN Authentication support Secure boot loader (firmware update) protocol Confidential & Proprietary Page 9 Saturn 8700 Specifications Technical Specifications Version 1.3 3.2 Product Technical Specifications The performance/electrical specifications for each feature of the SATURN 8700 reader are given in the table below. Table 3-1: Performance/Electrical Specifications Feature Specification RF Interface: RF Carrier Frequency 13.56 MHz RF Output 450mW (@50ohm load) Micro SIM push-push Interface Communication Links: USB, RS232 USB: 2.0 Full speed CDC Standard mini-USB connector Connectors USB only Mini USB connector Full interface JST 10 pin P/N BM10B-ZPDSS Indicators: Monochrome LED Four programmable on-board LEDs RGB LED Contactless logo illumination Audio speaker Multi tone differential drive buzzer Electronic Board Power Requirements: 8VDC – 40VDC, Pmax<3W On-board switching power supply 5VDC, Pmax<2.5W From USB bus in USB only Mechanical: H – 78.6 / 85.4 mm Dimensions (On panel / Flush) W – 61.0 / 67.8 mm (See Figure 5-1and Figure 5-2) D – 21.3 / 21.3 mm Weight 125 gr. Temperature: Operating -20°C to 70°C (-4°F to 158°F) Environment: IP rating IPX5 Vibrations 10 200 Hz @ 2.0G Front panel: >50N/cm2 Static pressure Side panels: >100N/cm2 Confidential & Proprietary Page 10 Saturn 8700 Specifications Technical Specifications Version 1.3 Warning: Power supply minimum requirements Keeping the DC supply voltage within the specified allowed range is crucial to guarantee proper operation of the equipment. The use of AC rectified power supply source, which is not properly filtered, forms a risk of too low voltage dips and hence should be avoided. It is highly recommended to check this issue with proper tools (e.g. oscilloscope) during the reader installation. For more details contact oti technical team via oti’s sales representatives. Confidential & Proprietary Page 11 Saturn 8700 Specifications Reader models Version 1.3 4 Reader models 4.1 SATURN 8700 RS232 The RS232 interface is implemented using a JST 10 pin connector (JST P/N BM10B-ZPDSS). Connector pin designation: 1. RS223 Rx 2. RS232 Tx 3. USB D4. Buzzer 1 5. USB D+ 6. Buzzer 2 7. GND (direct) 8. Vin 9. 5V 10. GND Ext (via common mode choke) Note: USB communication and external buzzer activation are not in OTI's standard products portfolio. 4.2 SATURN 8700 USB The USB model has a mini-USB connector on the back in the panel mount options or at the bottom of the reader in the desk top models. The USB connector provides communication and power to the reader. Note: Both models are available in either PM or FM housing options. The CM housing support only teh USB model. Confidential & Proprietary Page 12 Saturn 8700 Specifications Reader models Version 1.3 4.3 I nterface cables 4.3.1 RS232 cable A JST 10 pin connector (JST P/N BM10B-ZPDSS) is available to access the reader full interface. Figure 4-1: BM10B-ZPDSS Connector – Top Entry Type Figure 4-2: BM10B-ZPDSS Connector – Side Entry Type Figure 4-3: BM10B-ZPDSS Connector housing Confidential & Proprietary Page 13 Saturn 8700 Specifications Reader models Version 1.3 4.3.2 USB Cable The USB cable (1.8m) has a mini-USB upstream connector on the reader side and a USB downstream connector on the host side. In this hardware configuration, the reader is USB powered, no additional power supply is required. Figure 4-4: USB Cable Figure 4-5: USB Connection Confidential & Proprietary Page 14 Saturn 8700 Specifications Dimensions Version 1.3 5 Dimensions The reader’s front and side view dimensions are given in this chapter. All the dimensions are in millimeters. 5.1 On Panel dimensions Figure 5-1: On Panel dimensions Confidential & Proprietary Page 15 Saturn 8700 Specifications Dimensions Version 1.3 5.2 Flush mount dimensions Figure 5-2:: Flush mount dimensions Confidential & Proprietary Page 16 Saturn 8700 Specifications Dimensions Version 1.3 Figure 5-3: SATURN 8700 Size Scale Confidential & Proprietary Page 17 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 6 SATURN 8700 Mounting While the SATURN 8700 can be placed simply on the counter as a countertop reader connected to a terminal. It can also be mounted on an unattended devices such as ATM's and Vending Machines. This chapter describes the mounting options and procedures. The SATURN 8700 mounting possibilities include 3 main options, as illustrated below: 1. PM - on panel mounting. Rear RS232/USB cable connection. 2. FM - flush mounting inside cutout in the panel. Rear RS232/USB cable connection. 3. CM - Countertop (Desktop) mounting. PM with side USB cable connection. Different reader configuration allow mounting on the machine surface, flush with the machine surface or on the counter. Figure 6-1: Flush and On Panel Mounting Warning: Mounting on metal Direct mounting of the reader on metallic/conductive panel requires special attention as it negatively affects the reader contactless performance. For more details contact oti technical team via oti’s sales representatives. Confidential & Proprietary Page 18 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 6.1 On Panel Mounting The image below illustrates the SATURN 8700’s on panel mounting option. Figure 6-2: SATURN 8700 Mounting Studs 1. The SATURN 8700 is equipped with 4 mounting studs for front panel mounting. 2. The studs and cable are inserted through holes in the front panel. The nuts are fastened over the studs from the back of the front panel, protecting against potential attempts to dismantle the unit from the front. Confidential & Proprietary Page 19 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 Figure 6-3: SATURN 8700 Panel Mounting view Figure 6-4: SATURN 8700 Panel Mounting Drilling Template Confidential & Proprietary Page 20 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 6.2 Flush Mounting The image below illustrates the SATURN 8700’s flush mounting option. Figure 6-5: SATURN 8700 Flush Mount Confidential & Proprietary Page 21 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 Figure 6-6: SATURN 8700 Flush Mounting – Top View 1. The SATURN 8700 can be mounted flush with the front panel surface. 2. The flush mounting option requires a 63x80 mm cutout in the center of the non-metallic section of the front panel. 3. A mounting holder (green) in the back of the reader is tighten the device to the panel. A gasket that is separated between the device cover and the panel keep it waterproof. Confidential & Proprietary Page 22 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 Figure 6-7: SATURN 8700 Flush Mounting – Side View Confidential & Proprietary Page 23 Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 Figure 6-8: SATURN 8700 Flush Mounting – Rear View Figure 6-9: SATURN 8700 Flash Mounting - Cutout Confidential & Proprietary Page 24 Saturn 8700 Specifications Contact Us Version 1.3 7 Contact Us For oti America Technical Support (US and Canada): Phone: +1-732-429-1900 9:00 am to 5:00 pm Eastern time Monday – Friday Email: support@otiamerica.com For oti Technical Support (International): Phone: +972-4-6868000 (Ext. 8090) Email: info@otiglobal.com Confidential & Proprietary Page 25
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : Marina Create Date : 2016:07:13 12:06:49+03:00 Modify Date : 2016:07:13 12:07:19+03:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : Microsoft Word - SATURN 8700 UNO Specifications V1.3 11July2016.docx Creator : Marina Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:07:13 12:07:19+03:00 Producer : Acrobat Distiller 10.1.16 (Windows) Document ID : uuid:6d445308-ad54-488b-99d7-5d93f9f210dd Instance ID : uuid:459d2c89-3dc7-4073-87e5-fe75b11b6d15 Page Count : 26EXIF Metadata provided by EXIF.tools