Onity RFM100 MODULAR TRANSCEIVER User Manual 04 0096 Manual

Download:
Mirror Download [FCC.gov]
Document ID	460203
Application ID	LbeezAuMGvXDFXlnvLTf9w==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.27kB (40837 bits)
Date Submitted	2004-08-16 00:00:00
Date Available	2004-08-16 00:00:00
Creation Date	2004-07-06 11:06:38
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2004-07-06 13:46:26
Document Title	Microsoft Word - 04-0096 Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Brooke Copeland

FCC Part 15.247 Certification
Test Report
FCC ID: R32-RFM100
FCC Rule Part: 15.247
ACS Report Number: 04-0096-15C
Manufacturer: Onity, Inc.
Equipment Type: Modular Radio
Model: RFM100
Installation and Operators Guide
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
RFM100 Modular Radio – Instruction Manual
The RFM100 modular radio is an embedded modular radio designed to be used
only with our proprietary host devices referenced in this application. The RFM100
modular radio cannot be used as a standalone device and will not be sold to any
parties.
The RFM100 modular radio is installed inside host devices by mating its
connectors to connectors on the board of host devices.
Federal Communication Commission Declaration of Conformity Statement
This device complies with Part 15 Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interence, and
2. This device must accept accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.”
Warning: Changes or modifications to this device not expressly approved by
Onity could void the user’s authority to operate the equipment.
Onity, Inc.
2100A Nancy Hanks Drive. Norcross GA 30071 USA
Phone 1-770-935-4228. Toll Free 1-866-to-Onity
Fax1-770-488-6305. www.onity.biz
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de
l'interférence canadienne causant des règlements d'équipement. L'opération est
sujette aux deux conditions suivantes:
1. Ce dispositif peut ne pas causer l'interférence nocive, et
2. Ce dispositif doit accepter n'importe quelle interférence reçue, y compris
l'interférence qui peut causer l'opération peu désirée.
RF Exposure Safety Information
In accordance with FCC requirements of human exposure to radio frequency
fields, the radiating element shall be installed such that a minimum separation
distance of 20cm is maintained between it and the user or general population.
Proper use of this radio in accordance to the following guidelines will result in RF
exposure that is below the FCC recommended limits.
1. Do not hold any component containing the modular radio such that the it is
very close to or touching any exposed parts of the body, especially the
face or eyes, while operating.
2. When using any component containing the modular radio, maintain a
minimum distance of 7.9 inches or 20cm or more from the body of all
persons.
3. Only operate the modular radio in the following Onity host devices:
Wireless DDC Thermostat(WDDC), Door Switch Transmitter(RFDSW),
and PIR Motion Sensor(RFPIR).
Onity, Inc.
2100A Nancy Hanks Drive. Norcross GA 30071 USA
Phone 1-770-935-4228. Toll Free 1-866-to-Onity
Fax1-770-488-6305. www.onity.biz

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d828ba99-12ef-4834-91ca-cfd9ced22984
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2004:07:06 13:46:26-04:00
Create Date                     : 2004:07:06 11:06:38-04:00
Metadata Date                   : 2004:07:06 13:46:26-04:00
Document ID                     : uuid:0dff9990-b6ae-4f9f-89b1-38c7b5f7d9ff
Format                          : application/pdf
Title                           : Microsoft Word - 04-0096 Manual.doc
Creator                         : Brooke Copeland
Author                          : Brooke Copeland

EXIF Metadata provided by EXIF.tools