Onkyo TX SR501 SR501_DIG User Manual To The A80a8ad9 F17b 44c2 9b21 9397fe57cdb9
User Manual: Onkyo TX-SR501 to the manual
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
TX-SR501 Basic Operation Guide Introduction • This Guide describes basic operation of this receiver and connected devices (CD, DVD etc.). For further information about the advanced functions of this receiver, please refer to the main instruction manual. • This Guide does not explain connection details for the unit’s rear panel. Please refer to pages 10–23 of the main instruction manual for correct connection information. Otherwise, the entire A/V system may not work properly. • For more information on the remote controller, refer to the main instruction manual. Enjoying audio and visual sources Important notes • If MUTING function is activated, the sound will be muted. Make sure MUTING is set to OFF. • If the headphones are connected, no sound will be heard from the speakers. Do not connect headphones if you wish to listen to the sound from the speakers. Frontright speaker COMPONENT VIDEO VIDEO 1 / 2 / 3 DVD IN IN ANTENNA OUT 1. Frontleft speaker 2. FM 75 AM AC OUTLET Y FRONT SPEAKERS B PB VIDEO 2 PR REMOTE CONTROL DIGITAL INPUT OPTICAL 2 IN VIDEO 1 OUT IN DVD SURROUND SPEAKERS FRONT SPEAKERS A L L R R CENTER SPEAKER MONITOR OUT IN L VIDEO COAXIAL 1 R S VIDEO IN IN IN OUT OUT IN SURR FRONT CENTER L L SURROUND BACK SPEAKER L SUBWOOFER PRE OUT R R R CD TAPE 3. VIDEO 2 VIDEO 1 DVD SUB WOOFER To enjoy surround sound, place the speakers properly as described in “Installing Your Speakers” on pages 20 and 21, and make necessary settings as described in “Powering Up & Setting Up the TX-SR501/TX-SR501E” on pages 24 and 25. AC 120 V 60 Hz SWITCHED 120 W 1 A MAX. Enjoying DVD 1. Make sure that connections have been made correctly for the monitor TV and the DVD Player. Here, only the typical connections are shown. For details, see pages 12 and 13 of the main manual. Video input Video output S Video input S Video output COMPONENT VIDEO VIDEO 1 / 2 / 3 DVD IN IN ANTENNA OUT FM 75 AM Y Component video output PB VIDEO 2 PR REMOTE CONTROL DIGITAL INPUT OPTICAL 2 IN VIDEO 1 OUT IN DVD MONITOR OUT IN VIDEO COAXIAL 1 DVD player (DVD) S VIDEO Digital audio output (optical) IN IN IN OUT OUT IN SURR FRONT Component video input CENTER L L L SUBWOOFER PRE OUT TV R R Analog audio output R CD TAPE VIDEO 2 VIDEO 1 DVD SUB WOOFER : Signal flow 2. Connect the power cord to a wall outlet. The STANDBY indicator lights up. Wall outlet 3. 3. STANDBY/ The STANDBY indicator turns off, and the display area lights up. ON 8. DSP 6.-2. DVD 4. Press first to select RCVR mode. 4. Select the speaker system(s) to be used. To select RCVR mode, press the [RCVR] button. 5. Set the Input Select to DVD. When the digital output from the DVD player is connected to the OPTICAL 2 or COAXIAL input jack of this unit, change the assignment of digital inputs to input sources by referring to “Assigning Digital Inputs to Input Sources” on page 24. 6. Play a DVD. The video appears on the monitor TV. 4. SP A/ SP B To control an Onkyo DVD player 1 Make connection (see page 19 of the main manual). 2 Press DVD, then press the desired operation button (see page 42 of the main manual). , , , , , , , , DISC, 1–9, +10, 0, TOP MENU, MENU, RETURN, SETUP, / / / , and ENT buttons can be used. 5. DVD 7. VOLUME / Turn on the power. 7. Adjust the volume. 8. Select the listening mode. For details, see pages 34–36 of the main manual. • To enjoy multi channel input, see page 29 of the main manual. Enjoying Audio Compact Discs (CDs) 1. Make sure that connections have been made correctly for the CD Player. Here, only the typical connections are shown. For details, see page 17 of the main manual. : Signal flow COMPONENT VIDEO VIDEO 1 / 2 / 3 DVD IN IN ANTENNA OUT FM 75 AM Y Digital audio output (coaxial) PB VIDEO 2 PR REMOTE CONTROL DIGITAL INPUT OPTICAL 2 IN VIDEO 1 OUT DVD MONITOR OUT IN IN VIDEO COAXIAL 1 CD Player (CD) S VIDEO IN IN IN OUT OUT IN SURR FRONT L (White) CENTER L L L SUBWOOFER PRE OUT Analog audio output R R R CD TAPE VIDEO 2 2. VIDEO 1 DVD SUB WOOFER R (Red) Connect the power cord to a wall outlet. The STANDBY indicator lights up. Wall outlet 3. Turn on the power. The STANDBY indicator turns off, and the display area lights up. 3. STANDBY/ ON 4. Select the speaker system(s) to be used. 8. DSP To select RCVR mode, press the [RCVR] button. 6.-3. CD 4. Press first 5. Set the Input Select to CD. When the digital output from CD player is connected to the OPTICAL 1 or 2 input jack of this unit, change the assignment of digital inputs to input sources by referring to “Assigning Digital Inputs to Input Sources” on page 24. 6. Play a CD. to select RCVR mode. 4. SP A/ SP B To control an Onkyo CD player 1 Make connection (see page 19 of the main manual). 2 Enter the manufacturer’s code “300” into the remote controller (see page 41 of the main manual). 3 Press CD, then press the desired operation button (see page 42 of the main manual). , , , , , , , , DISC, 1–9, +10, 0 buttons can be used. 5. CD 7. Adjust the volume. 8. Select the listening mode. 7. VOLUME / For details, see pages 34–36 of the main manual. Enjoying the FM/AM radio 3. PRESET 1. Make sure that the power to the TX-SR501 has been turned on, and the antenna connections have been made correctly. (See pages 22 and 23 of the main manual.) Also, make sure that broadcast stations have been programmed as presets. (See page 30 and 31 of the main manual.) 2. Set the Input Select to TUNER (FM or AM). 3. Select the desired preset station. 4. Adjust the volume and tonal quality. / 2. TUNER 4. VOLUME / If no sound is heard Refer to the following table for the cause and corrective action. There may be a problem with a connected device. Refer to the user’s guide of the connected device and make sure that all connections have been made correctly. The power is turned on but no sound is heard. The power is not turned on, and no sound is heard. The input signal format does not match the audio selection (PCM, DTS, or Multich). Check the connector being used and select an appropriate audio option (Auto or Analog). (See page 28 and 29 of the main manual.) The speaker select switch setting is incorrect. Match the speaker select switch setting to the speakers you are using. (See page 32 of the main manual.) The MUTING indicator flashes. Press the MUTING button to turn off the MUTING indicator. (See page 33 of the main manual.) Connections are incorrect. Make sure that all connections are made correctly. (See pages 10–23 of the main manual.) The power is disconnected from the AC outlet. Plug the power cable to the AC outlet securely. External noise has affected the internal CPU. Unplug the power cable from the AC outlet, wait five seconds, then plug it again. Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net ONKYO CHINA LIMITED Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 SN 29343475 HOMEPAGE http://www.onkyo.co.jp/ I0303-1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Modify Date : 2003:02:27 14:58:00Z Create Date : 2003:02:18 16:36:12Z Page Count : 4 Creation Date : 2003:02:18 16:36:12Z Mod Date : 2003:02:27 14:58:00Z Producer : Acrobat Distiller 5.0.5 for Macintosh Author : ONKYO Metadata Date : 2003:02:27 14:58:00Z Creator : ONKYO Title : TX-SR501_DIG Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools