Openmatics s r o SMART ZF Smart Service User Manual edited ZF Smart Service Manual 27112017

Openmatics s.r.o. ZF Smart Service edited ZF Smart Service Manual 27112017

User Manual

3. If the tool is not workingwhat to check5. Simplified EU Declaration of ConformityHereby, Openmatics s. r. o. declares that the radio equipment typeis in compliance with Union harmonization legislation 2014/30/EU, 2014/35/EU, 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.OPENMATICS.com.TrademarkManufacturerType of EquipmentModel NamesPart NumbersOpenmaticsOpenmatics s. r. o.Passenger Car Service DeviceZF Smart Service0501.337.224Ensure there is a Blue LED in the ZF Smart Service Device.Ensure the software is up to date by connecting to the internet. The ZF Smart Service App will check automatically.Is the ZF Smart Service Device connected to the Android device?4. Technical SupportShould you have a problem then please contact technical support.Please make sure when contacting support you have the following information: Unit Serial number, Function being used, Software version,Vehicle Manufacture and ModelOpenmatics s.r.o.Poděbradova 2842/1, 301 00 Pilsen, Czech RepublicCopyright © Openmatics s. r. o.This document is protected by copyright.Complete or partial reproduction or dissemination of this document is prohibited without the consent of Openmatics s. r. o. Infringements lead to civil and criminal prosecution.ZF Smart Servicesupport@zfsmartservice.comwww.zfsmartservice.com0501.337.224
ZF Smart ServiceThe ZF Smart Service device allows you to carry out the following service functions: Reset Service indicatorBrake BleedBrake Pad replacementSteering Angle calibrationEOBD diagnostics1. App download Download the ZF Smart Service App on Google Play.Keep the card in a safe place2. Registrationand deviceactivationThe Serial number and Activation code are on the rear of the Activation CardRadio operating frequencies:Bluetooth: Operating frequency: 2402-2480 MHz (79 channels) Maximum output power: -0.7 dBm EIRP average (calculated)Bluetooth low energy: Operating frequency: 2402-2480 MHz (40 channels) Maximum output power: -1.4 dBm EIRP average (calculated)
FCC Statement15.191. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.15.21Note: The grantee is not responsible for any changes or modifications not expressly approved bythe party responsible for compliance. Such modifications could void the user’s authority to operatethe equipment.15.105(b)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for helpRF Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance of 20 cmbetween the radiator and your body.

Navigation menu