Openmatics s r o TAG2 deTAGtive logistics TAG 2 User Manual Manual 1 7 12042017 print indd
Openmatics s.r.o. deTAGtive logistics TAG 2 Manual 1 7 12042017 print indd
User Manual
logistics Installation Guide Bedienungsanleitung CONGRATULATIONS HERZLICHEN GLÜCKWUNSCH on your deTAGtive TAG. This document guides you through the first steps, from installing the app over mounting to calibrating the TAG. zu Ihrem deTAGtive TAG. Mit dieser Anleitung begleiten wir Sie bei Ihren ersten Schritten von der Installation der App, über die Montage bis hin zur Kalibrierung des TAGs. 1 | App Installation 1 | Installation der App You can find the app by searching for “deTAGtive logistics” in the app store of your smartphone or tablet. Further details and notes how to use the app are available at www.detagtive.com. Sie finden die App mit dem Suchbegriff „deTAGtive logistics“ im App Store Ihres Smartphones oder Tablets. Weitere Details sowie Hinweise zur Benutzung der App erhalten Sie auf www.detagtive.com. 2 | Identify TAG 2 | TAG identifizieren Option A Variante A Option B Variante B 3 | Put TAG into operation 3 | TAG in Betrieb nehmen Step 1 Schritt 1 Select the identified TAG or an unused TAG from the list Identifizierten TAG oder freien TAG in Liste auswählen Step 2 Schritt 2 Configure basic settings Grundeinstellungen vornehmen Step 3 Schritt 3 Assign a profile or adjust individual thresholds Profil zuweisen oder Schwellwerte individuell anpassen Step 4 Schritt 4 Confirm settings. The TAG is now ready for use. Einstellungen bestätigen. Der TAG ist jetzt betriebsbereit. 4 | Mount TAG 4 | TAG befestigen Preferred mounting position is upright, drill holes accordingly: Empfohlene Einbauposition hochkant, Bohrlöcher entsprechend: Ø 3.1 mm for blind rivets 3mm Ø 3.1 mm für Blindnieten mit 3mm Ø 3.5 mm for screwing with M3 screw and nut Ø 3.5 mm bei Verschrauben mit M3 Schraube und Mutter Ø 2.5 mm for M3 screw thread Ø 2.5 mm für Gewinde M3 Choose protected, stable and flat mounting surface to prevent unwanted loos of the TAG Geschützte, stabile und ebene Montagefläche wählen, um ungewolltes Lösen des TAGs zu vermeiden Mount TAG in a way that it can absorb the same temperature as the monitored object (TAG2/TAG3 only) TAG so befestigen, dass er dieselbe Temperatur aufnehmen kann, wie das zu überwachende Objekt (nur TAG2/TAG3). 5 | Calibrate TAG (TAG2 / TAG3 only) 5 | TAG kalibrieren (nur TAG2 / TAG3) After mounting, perform the calibration function of the TAG in the app. Nach Befestigung die Kalibrierungsfunktion des TAGs in der App ausführen. Recycling Program Warranty Garantie Openmatics, s.r.o provides free recycling of its used equipment at the company headquarter, please forward our used equipment to the contact address below. In case customer decides not to use this option, he is obligated to comply with local laws and regulations for disposal of electrical appliances. You get a 2 year warranty for the TAG. During the warranty period we will rectify any defects that are due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Sie erhalten 2 Jahre Garantie auf den TAG. Während der Garantiezeit beseitigen wir etwaige Mängel, die nachweislich auf Material- oder Fabrikationsfehler beruhen, nach unserer Wahl durch Austausch oder Nachbesserung der defekten Teile. Recycling-Programm Disposal Entsorgung Openmatics bietet kostenloses Recycling der gebrauchten Geräte, bitte reichen Sie die gebrauchten Geräte an die Kontaktadresse unten weiter. Falls der Kunde beschließt, diese Möglichkeit nicht zu nutzen, ist er verpflichtet, die örtlichen Gesetze und Entsorgungsvorschriften von Elektrogeräten einzuhalten. In accordance with European Directive 2002/96/EC all electrical and electronic appliances must be disposed of separately via local collection points. Please follow the local regulations and do not dispose of your old appliances with normal household waste. Gemäß der europäischen Richtlinie 2002/96/EC müssen alle elektrischen und elektronischen Geräte über lokale Sammelstellen getrennt entsorgt werden. Bitte beachten Sie die lokalen Vorschriften und entsorgen Sie Ihre Altgeräte nicht mit dem normalen Hausmüll. Openmatics s.r.o. Podebradova 2842/1 301 00 Pilsen Czech Republic Phone: +420 371 150 000 Fax: +420 371 151 001 Email: support@detagtive.com Openmatics s.r.o. Podebradova 2842/1 301 00 Pilsen Tschechische Republik Telefon: +420 371 150 000 Telefax: +420 371 151 001 E-Mail: support@detagtive.com Rev. 1.7, 04/2017 For detection, place the TAG on your smartphone or tablet Scan QR code of the TAG (may require the installation of an additional app) Copyright © 2017, ZF Friedrichshafen AG Rev. 1.7, 04/2017 TAG zur Erkennung auf Smartphone oder Tablet legen QR-Code des TAGs scannen (kann die Installation einer zusätzlichen App erfordern) 1 | Number Nummer EU DECLARATION OF CONFORMITY EG-KONFORMITÄTSERKLÄRUNG 2 | Name and address of the manufacturer or his authorised representative Name und Anschrift des Herstellers oder seines Bevollmächtigten Name / Name Street / Straße City / Stadt Postal Code / PLZ Country / Land 3 | This declaration of conformity is issued under the sole responsibility of the manufacturer. Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller. DOC2016102601 Openmatics s.r.o. Podebradova 2842 Plzen 301 00 Czech Republic 4 | Objects of the declaration Gegenstand der Erklärung Trademark / Trademark Manufacturer / Hersteller Type of Equipment / Art der Ausrüstung Part numbers / Teilnummern Model names / Modellbezeichnungen deTAGtive Openmatics s.r.o. Bluetooth telemetry device 0501.223.312; 0501.222.811; 0501.224.017 deTAGtive logistics TAG 1 deTAGtive logistics TAG 2 deTAGtive logistics TAG 3 5 | The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation Der unter Nummer 4 beschriebene Gegenstand der Erklärung erfüllt die einschlägigen Harmonisierungs– rechtsvorschriften der Gemeinschaft 2014/30/EU 2014/35/EU 2014/53/EU Low Voltage (LVD) Electromagnetic Compatibility (EMC) Radio Equipment 6 | References to the relevant harmonised standards used, or references to the specifications in relation to which conformity is declared Angabe der einschlägigen harmonisier ten Normen, die zugrunde gelegt wurden, oder Angabe der Spezifikationen, für die die Konformität erklärt wird 2014/30/EU EN 301 489-1 V1.9.2 EN 301 489-17 V2.2.1 EN 62479:2010 EN 300 328 V.1.9.1 7 | Additional information Additional information Signed for and on behalf of Unterzeichnet für und im Namen von Place / Ort Date of issue / Datum der Ausstellung Name / Name Function / Funktion Signature / Unterschrift 2014/35/EU 2014/53/EU Federal Communications Commission (FCC) may not cause harmful interference, Compliance Information Statement and (2) this device must accept any interference received, including interference that may cause undesired The product complies with Code of Federal Regulations, Title 47, in particular: operation. Openmatics s.r.o. Plzen 2016-10-26 Petr Loucký General Manager §15.105 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance §15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device §15.21 No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment. with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Industry Canada (IC) Compliance Statement This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. ENGLISH This product complies with ISED radiation exposure limits for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 7.9 in (20 cm) between the user and the device. FRANCAIS Ce produit est conforme aux limites d‘exposition aux radiations ISED pour un environnement non contrôlé. L’équipement doit être installé et fonctionné à une distance minimum de 7,9 po (20 cm) entre l’utilisateur et le dispositif. §2.1091 This device complies with FCC radiation exposure limits for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 7.9 in (20 cm) between the user and the device. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: Ce produit répond aux spécifications techniques applicables de l‘Innovation, Sciences et Développement économique Canada. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) l’appareil ne doit pas produire de brouillage; 2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Language : cs Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Create Date : 2017:04:12 15:30:47+02:00 Metadata Date : 2017:04:12 15:30:50+02:00 Modify Date : 2017:04:12 15:30:50+02:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:30820f45-b027-438d-a147-b1f83370eabc Original Document ID : xmp.did:3e012a41-fe9b-4e80-a83a-77fbf3118ff2 Document ID : xmp.id:8901d452-80e1-7243-8043-7ef7ca2a5948 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:21003853-cea3-3044-9767-273fc62ce068 Derived From Document ID : xmp.did:aa876615-71c0-114b-a8e1-f8a794fb3b33 Derived From Original Document ID: xmp.did:3e012a41-fe9b-4e80-a83a-77fbf3118ff2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:04:12 15:30:47+02:00 Format : application/pdf Title : Manual_1.7_12042017_print.indd Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Count : 2 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools