Option OGL3QS PCMCIA card for UMTS/GPRS/GSM User Manual Integration manual

Option NV PCMCIA card for UMTS/GPRS/GSM Integration manual

Integration Manual

OPTION WIRELESS Technologies, Kolonel Begaultlaan 45, B-3012 Leuven Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com Option Confidential Integration manual: Option Globetrotter Data Card
Integration Manual Author: Roeland Timmermans Version: 2Creation Date: May 26, 2005 Page: 1 of 4 Option Confidential: This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of Option NV. About this document Overview and Purpose This document describes the manner in which a Option Globetrotter datacard can be integrated into a third party device and what conditions must be fulfilled in doing so. Confidentiality All data and information contained or disclosed by this document is confidential and proprietary of Option NV, and all rights therein are expressly reserved. By accepting this document, the recipient agrees that this information is held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without prior and written permission of Option NV Version History Date Release Version Author(s) Revision(s) Remarks Phase 25/05/05 1.0 – Draft 1 RoelT Initial version 1.0.0 26/05/05 1.0 - Draft 2 BrunoM Corrections 1.0.0
Integration Manual Author: Roeland Timmermans Version: 2Creation Date: May 26, 2005 Page: 2 of 4 Option Confidential: This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of Option NV. Table of contents 1. Introduction............................................................................................................... 3 2. PCMCIA Interface.................................................................................................... 3 3. RF Connector ............................................................................................................ 4 4. SAR Safety measures................................................................................................ 4 5. FCC label................................................................................................................... 4
Integration Manual Author: Roeland Timmermans Version: 2Creation Date: May 26, 2005 Page: 3 of 4 Option Confidential: This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of Option NV. 1. Introduction When integrating the Option Globetrotter 3G Quad Slim it is necessary to pay attention to all technical aspects described in this document. Using these guidelines is mandatory to provide certainty of the correct performance of the card in its new environment. 2. PCMCIA Interface The third party device shall be equipped with a fully compliant PCMCIA Interface to which the Option data card can be connected in order to communicate with the other parts integrated into the new device. Higher layer communication with the option datacard is only possible using at-commands described in 3GPP specifications TS 27.007 and special developed option proprietary at-commands. Using these commands specific characteristics of the datacard can be altered to obtain the desired functionality.
Integration Manual Author: Roeland Timmermans Version: 2Creation Date: May 26, 2005 Page: 4 of 4 Option Confidential: This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of Option NV. 3. RF Connector When it is desired to use the datacard in conducted mode it is necessary to use the output RF connector. To connect to the output use the R299.792.000 RF connector (manufacturer Radiall). 4. SAR Safety measures Concerning specific safety guidelines we advise the end-user to keep a minimum distance of 20 cm between himself and the device. 5. FCC label When the card is integrated into the new equipment it must still have the original FCC-ID label developed by Option N.V. If the FCC ID in not visible when the card is installed inside another device, then the outside of the complete device into which the card is installed must also display a label referring to the enclosed card. This exterior label can use wording such as the following: “Contains FCC ID NCMOGL3QS”.

Navigation menu