Option OGL3QS PCMCIA card for UMTS/GPRS/GSM User Manual Integration manual

Download:
Mirror Download [FCC.gov]
Document ID	548124
Application ID	HgdUeSa5LAYBqhb12bKmow==
Document Description	Integration Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.09kB (38625 bits)
Date Submitted	2005-06-03 00:00:00
Date Available	2005-06-03 00:00:00
Creation Date	2005-05-26 14:37:32
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2005-05-26 14:37:32
Document Title	Microsoft Word - Integration manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	BrunoM

Integration manual:
Option Globetrotter Data Card
OPTION WIRELESS Technologies, Kolonel Begaultlaan 45, B-3012 Leuven
Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com
Option Confidential
Integration Manual
About this document
Overview and Purpose
This document describes the manner in which a Option Globetrotter datacard can be
integrated into a third party device and what conditions must be fulfilled in doing so.
Confidentiality
All data and information contained or disclosed by this document is confidential
and proprietary of Option NV, and all rights therein are expressly reserved. By
accepting this document, the recipient agrees that this information is held in
confidence and in trust and will not be used, copied, reproduced in whole or in
part, nor its contents revealed in any manner to others without prior and written
permission of Option NV
Version History
Date
25/05/05
Release
1.0 – Draft
Version
Author(s)
RoelT
26/05/05
1.0 - Draft
BrunoM
Revision(s) Remarks
Phase
Initial
1.0.0
version
Corrections 1.0.0
Author:
Creation Date:
Roeland Timmermans
May 26, 2005
Option Confidential:
This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of
Option NV.
Version:
Page:
1 of 4
Integration Manual
Table of contents
1.
2.
3.
4.
5.
Introduction............................................................................................................... 3
PCMCIA Interface.................................................................................................... 3
RF Connector ............................................................................................................ 4
SAR Safety measures................................................................................................ 4
FCC label ................................................................................................................... 4
Author:
Creation Date:
Roeland Timmermans
May 26, 2005
Option Confidential:
This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of
Option NV.
Version:
Page:
2 of 4
Integration Manual
1. Introduction
When integrating the Option Globetrotter 3G Quad Slim it is necessary to pay
attention to all technical aspects described in this document. Using these guidelines is
mandatory to provide certainty of the correct performance of the card in its new
environment.
2. PCMCIA Interface
The third party device shall be equipped with a fully compliant PCMCIA Interface to
which the Option data card can be connected in order to communicate with the other
parts integrated into the new device.
Higher layer communication with the option datacard is only possible using atcommands described in 3GPP specifications TS 27.007 and special developed option
proprietary at-commands. Using these commands specific characteristics of the
datacard can be altered to obtain the desired functionality.
Author:
Creation Date:
Roeland Timmermans
May 26, 2005
Option Confidential:
This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of
Option NV.
Version:
Page:
3 of 4
Integration Manual
3. RF Connector
When it is desired to use the datacard in conducted mode it is necessary to use the
output RF connector. To connect to the output use the R299.792.000 RF connector
(manufacturer Radiall).
4. SAR Safety measures
Concerning specific safety guidelines we advise the end-user to keep a minimum
distance of 20 cm between himself and the device.
5. FCC label
When the card is integrated into the new equipment it must still have the original
FCC-ID label developed by Option N.V.
If the FCC ID in not visible when the card is installed inside another device, then the
outside of the complete device into which the card is installed must also display a
label referring to the enclosed card.
This exterior label can use wording such as the following: “Contains FCC ID
NCMOGL3QS”.
Author:
Creation Date:
Roeland Timmermans
May 26, 2005
Option Confidential:
This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of
Option NV.
Version:
Page:
4 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:05:26 14:37:32+02:00
Create Date                     : 2005:05:26 14:37:32+02:00
Format                          : application/pdf
Title                           : Microsoft Word - Integration manual.doc
Creator                         : BrunoM
Document ID                     : uuid:e62c46c1-5235-4860-a80e-c2092769b522
Instance ID                     : uuid:fd1aa1a2-5a77-414c-ad86-48103a88408b
Page Count                      : 5
Author                          : BrunoM

EXIF Metadata provided by EXIF.tools