Orbit Irrigation Product HT8ZB001 Outlet Hose Faucet Timer User Manual

Orbit Irrigation Product Inc. Outlet Hose Faucet Timer Users Manual

Users Manual

START TIME1. Turn dial to START TIME.2. Using the +/- buttons, set your start time, including AM and PM.3. Turn dial to save changesHOW LONG1. Turn dial to HOW LONG.2. Using the +/- buttons, select watering duration from 1 to 240 minutes3. Turn dial to save changes.HOW OFTEN1. Turn dial to HOW OFTEN.2. Using the +/- buttons, set your watering frequency. You can choose to water every 6 hours, 12 hours, or from 1 to 7 days.NOTE: 1 is every day, 2 is every other day, etc.3. Turn dial to save changes. DIAL—Rotate the dial to customize your watering scheduleRESET—Press to clear all programmingMANUAL/CLEAR—Press to water manually or to clear programming within a specific program+/- BUTTONS—Use these buttons to adjust time and system setup1 OUTLET HOSE FAUCET TIMERIMPORTANT PLEASE READ!TIMER FEATURESAUTO—Timer waters according to your customized scheduleSET CLOCK—Set the time of daySTART TIME—Select what time you would like watering to startHOW LONG—Determine how long to waterHOW OFTEN—Choose how often you will waterOFF—Turn off all wateringWHEN EXPECTING FREEZING TEMPERATURES, TIMERS SHOULD BE REMOVED FROM THE HOSE FAUCET AND STORED INDOORS TO AVOID POTENTIAL FREEZE DAMAGE.FILTER TRAPS DIRT PARTICLES, PROLONGING LIFE OF TIMER. CLEAN FILTER REGULARLY AND REPLACE IF WORN.QUICK STARTINSTALLING THE BATTERIES1. Remove the tray on the back of the timer by sliding or pulling it out.2. Insert two AA (1.5V) alkaline batteries (not included) and replace the tray.NOTE: Firmly replace the battery tray to insure water resistance and increase battery life. You will know the battery tray is fully inserted if it does not pull out easily. Used up or dead batteries must be removed from the timer and disposed of properly. Batteries should be removed from the timer at the end of the watering season and replaced with new ones at the beginning of the next watering season. Replace batteries when low battery icon appears on display.PROGRAMMING THE TIMERSET CLOCK1. Turn dial to SET CLOCK.2. Using the +/- buttons, set the time of day, including AM and PM.3. Turn dial to save changes.AMAMMINUTESDAYS6:00RESETMANUALHOSE TAP CONNECTION+/- BUTTONSMANUAL/ CLEARFILTERDIALRESETOUTLETAMDATE: 11/05/2013DESIGNER: SH MARKETING: AYARTWORK №: 27087-24 rASOFTWARE: Adobe Indesign CS6Printers are responsible for meeting print production requirements. Any changes must be approved by Orbit®. Printed piece must meet designated specifications on this form.© 2013 Orbit Inc. This work is the property of Orbit®, and cannot be used, reproduced or distributed in any way without their express permission.DielinePMS0000FoldPMS0000Product CoveragePMS0000Dims./ CalloutPMS0000∙∙∙∙ L:W:H:000.000"Orbit®1.801.299.5555orbitonline.com KGlueFoldedW:H:Flat Additional Information3.0"3.0"12.0"6.0"PRINTERS ARE REQUIRED TO MATCH ALL SPECIFIED PMS COLORS.
PN 27087-24 rACongratulations! Your timer is now programmed. Turn your dial to AUTO to allow your timer to water according to programmed time, station, duration, and frequency.ADDITIONAL FEATURESRAIN DELAYRain delay allows you to postpone watering for a set period of time. To access the rain delay, follow the steps below.1. With the dial on AUTO, press the + button to select a delay of 24 hrs, 48 hrs, or 72 hrs.2. Screen will flash between clock and hours remaining before programmed cycle resumes.3. To remove rain delay, turn dial to OFF and then back to AUTO.MANUAL/HAND WATERINGThis feature allows you to water without interrupting your set schedule. To access this feature, follow the steps below.HRS1. With the dial on AUTO, press the MANUAL button.2. Use the + and – buttons to select watering time, from 1 to 240 minutes.NOTE: There may be a slight delay between the time the manual button is pressed and when watering begins.To stop manual watering, turn the dial to OFF. Turn the dial back to AUTO to resume your programmed watering schedule.TROUBLESHOOTINGWATER DOES NOT COME ON AT DESIRED TIME.CHECK IF:• Clock is set to correct time, including AM and PM.• Start time is set to desired time, including AM and PM.• Rain Delay is on.TIMER DOES NOT WATER.CHECK IF:• Timer is set to AUTO.• Hose faucet is on.• Batteries are low.• Clock is set to correct time, including AM and PM.• Rain Delay is on.WATER WON’T TURN OFF.CHECK IF:• HOW LONG is set to desired time.WORKING WATER PRESSUREMinimum: 25 psi Maximum: 100 psiWORKING TEMPERATUREMaximum: Do not exceed 120°FMinimum: Keep from freezingWARNINGSFor outdoor use with cold water only.FCC STATEMENTThe U.S. Federal Communications Commission (in 47 cfr 15.105) has specified that the following notices be brought to the attention of users of this product.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by Orbit may cause harmfulinterference and void the FCC authorization to operate this equipment.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, MANUALMINUTESwhich can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.© 2013 Orbit Irrigation Products, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.Orbit® Irrigation Products, Inc. North Salt Lake, UT 84054

Navigation menu