Oregon Scientific Global Distribution SE11-01 jumbo wall clock User Manual

Oregon Scientific Global Distribution Limited jumbo wall clock Users Manual

Users Manual

EN1Jumbo Wall Clock Model: JW108USER MANUALJW108_M_EN.indd 1 14-7-10 1:27
EN2Jumbo Wall Clock Model:JW108USER MANUALCONTENTSOverview ..................................................................... 3 Front View ............................................................... 3 Rear View ................................................................ 3 Remote Sensor ....................................................... 4Getting started ........................................................... 4 Insert Batteries ........................................................ 4 Remote Sensor .......................................................... 4 Sensor Data Transmission ...................................... 5Clock ........................................................................... 5 Clock Reception ...................................................... 5 Set The Clock Manually .......................................... 6 Weather Forecast ...................................................... 6Temperature ............................................................... 6Precautions ................................................................ 7Specications ............................................................ 7About Oregon Scientic ........................................... 8EU - Declaration Of Conformity ................................ 8FCC Statement ........................................................... 9 Declaration Of Conformity ...................................... 10JW108_M_EN.indd 2 14-7-10 1:27
EN3OVERVIEWFRONT VIEW 1278634 5 1. Current time, weather display2. Current weekday display3. Current date display4. Current indoor temperature reading 5. Current outdoor temperature and sensor reception indication6. : Main unit low battery display7. : Outdoor remote sensor low battery display8. : Clock signal reception indicationREAR VIEW 11 12 1391014151617189. Battery compartment10. Battery compartment door11. : Manually adjust current time and date12. +/- Increase/decrease settings13. SENSOR: Enable/disable searching sensor signal14. Wall mounting hole15. EU/UK/US: Slide to select desired clock reception; time and date setting16. °C/°F: Slide to select desired temperature unit17. RCC: Enable/disable clock signal reception18. RESET: Reset the unit to default settingsJW108_M_EN.indd 3 14-7-10 1:27
EN4REMOTE SENSOR 202321 1 2 3Reset 2219 19. LED status indicator20. Wall mount hole21. CHANNEL switch22. RESET: Reset the unit to default settings23. Battery compartmentGETTING STARTEDINSERT BATTERIES1. Remove the battery compartment.2. Insert the batteries, matching the polarities (+/-).3. Press RESET after each battery replacement. LOCATION MEANINGClock/alarm area Main unit batteries lowOutdoor temperature areaensor batteries lowREMOTE SENSORThe main unit can collect data from up to 1 sensor.To set up the sensor:1. Open the battery compartment.2. Slide the CHANNEL switch to 1, then press RESET.3. Close the battery door.4. Place the sensor within 98 ft (30 m) of the main unit using the wall mount. TIP Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 5 ft (1.5 m) and which can shield it from direct sunlight or wet conditions for an accurate reading. JW108_M_EN.indd 4 14-7-10 1:27
EN5The sensor reception icon in the remote sensor area shows the status:Screen display DescriptionMain unit is searching for sensor(s).The channel has been found.The sensor cannot be found. TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. CLOCKCLOCK RECEPTIONThis clock is designed to synchronize its clock automatically with a clock signal.Slide to select the desired region (EU/UK/US).Region SignalEU DCFUK MSFUS WWVB1.5m(5ft) NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.SENSOR DATA TRANSMISSIONTo search for a sensor:Press and hold SENSOR. Press and hold again to stop searching.JW108_M_EN.indd 5 14-7-10 1:27
EN6Clock signal reception indicator:Screen display DescriptionSearching for clock signal receptionExcellent signalWeak signalNo clock signal reception NOTE It takes 2-10 minutes to receive the clock signal. If the signal is weak, it could take up to 24 hours to receive a valid signal.To enable/disable signal reception:Press and hold RCC.SET THE CLOCK MANUALLY1. Press and hold RCC in the battery compartment to disable the clock signal reception.2. Press and hold .3. Press +/- to change the settings.4. Press to conrm.5. Press once or press and hold +/- to adjust the setting. For EU/UK, the time-zone offset sets the clock up to +/- 23 hours from the received clock signal time. For US, the time-zone setting is 0 (P), 1 (M), 2 (C), 3 (E).6. Press to conrm.7. The settings order is: 12/24 hour format, hour, minute, year, calendar format (day-month/month-day), month, day and language.8. Press once or press and hold +/- to adjust the setting. NOTE The language options are English (E), Spanish (S), Italian (I), German (D) and French (F).WEATHER FORECASTThis product forecasts the next 12 hours of weather within a 19-31 mile (30-50 km) radius.Screen display DescriptionSunnyCloudyRainySnowyTEMPERATURETo select temperature unit:• Slide to °C or °F for temperature readings in the battery compartment of the main unit. JW108_M_EN.indd 6 14-7-10 1:27
EN7PRECAUTIONS• Do not subject the unit to excessive force, shock, dust, temperature or humidity.• Do not cover the ventilation holes with any items such as newspapers, curtains etc.• Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.• Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit’s internal components. This invalidates the warranty.• Only use fresh batteries. Do not mix new and old batteries.• Images shown in this manual may differ from the actual display.• When disposing of this product, ensure it is collected separately for special treatment and not as household waste.• Placement of this product on certain types of wood may result in damage to its nish for which Oregon Scientic will not be responsible. Consult the furniture manufacturer's care instructions for information.• The contents of this manual may not be reproduced without the permission of the manufacturer.• Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.• Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before rst use. NOTE The technical specications for this product and the contents of the user manual are subject to change without notice. NOTE Features and accessories will not be available in all countries. For more information, please contact your local retailer.SPECIFICATIONSTYPE DESCRIPTIONMAIN UNITL x W x H 390 x 243 x 25 mm15.3 x 9.57 x 0.98 inWeight 1052 g (37.1 ounces) without batteryOperation range -5°C to 50°C (23°F to 122°F)Time format 24/12 Hour withAM/PMTemperature format °C/°FDate format MM:DD/DD:MMJW108_M_EN.indd 7 14-7-10 1:27
EN8Day-of-week display English/French/German/Spanish/ItalianPower 3 x UM-3 (AA) 1.5 V batteriesREMOTE UNITL x W x H 94.5 x 48 x 27 mm(3.72 x 1.89 x 1.06 in)Weight 44 g (1.55 ounces) without batteryTransmission range 98 ft (30 m) unobstructedTemperature range -20°C to 60°C (-4°F to 140°F)Power 2 x UM-3 (AA) 1.5 V batteriesSplash-proof standard JIS-3 ABOUT OREGON SCIENTIFICVisit our website www.oregonscientic.com to learn more about Oregon Scientic products. For any enquiry, please contact our Customer Service at info@oregonscientic.com. Oregon Scientic Global Distribution Limited reserves the right to interpret and construe any contents, terms and provisions in this user manual and to amend it, at its sole discretion, at any time without prior notice. To the extent that there is any inconsistency between the English version and any other language versions, the English version shall prevail. EU - DECLARATION OF CONFORMITYHereby, Oregon Scientic, declares that Jumbo Wall Clock (Model: JW108) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientic Customer Service.COUNTRIES RTTE APPROVAL COMPLIED All EU countries, Switzerland and Norway NCHJW108_M_EN.indd 8 14-7-10 1:27
EN9FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.JW108_M_EN.indd 9 14-7-10 1:27
EN10DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientic.com), or on the warranty card for this product) for all inquiries instead.WeName: Oregon Scientic, Inc.Address: 10778 SW Manhasset Dr. UNIT B-2 Tualatin, Or 97062 USATelephone No.: 1-800-853-8883declare that the product Product No.: JW108Product Name: Jumbo Wall ClockManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate, Phase 1, 41 Man Yue St., Hung Hom, Kowloon, Hong Kongis in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.JW108_M_EN.indd 10 14-7-10 1:27
EN11© 2014 Oregon Scientic. All rights reserved.300103701-00001-10JW108_M_EN.indd 11 14-7-10 1:27

Navigation menu