Oregon Scientific Emr201 Users Manual EMR201_target_UM_R4

EMR201 to the manual 4d4b39f9-7b4c-4c91-af9d-199789e7105c

: Oregon-Scientific Oregon-Scientific-Emr201-Users-Manual-374427 oregon-scientific-emr201-users-manual-374427 oregon-scientific pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

LOCATION
Indoor temperature
area
Outdoor temperature
area

Wireless Indoor and
Outdoor Thermometer
with LED Ice Alert
Model: EMR201

•
•

To set up the sensor:
1. Open the battery compartment (see FIG 3).
2. Select channel 1 then press RESET.
3. Close the battery door.
4. Place the sensor within 30 m (98 ft) of the main
unit using the table stand or wall mount.

OVERVIEW
FRONT VIEW

TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of
not more than 5 ft and which can shield it from direct
sunlight or wet conditions for an accurate reading.
OUT

•

Sensor batteries low

REMOTE SENSOR

USER MANUAL

1

MEANING
Main unit batteries low

•

Placement of this product on certain types
of wood may result in damage to its finish for
which Oregon Scientific will not be responsible.
Consult the furniture manufacturer’s care
instructions for information.
The contents of this manual may not be
reproduced without the permission of the
manufacturer.
Do not dispose old batteries as unsorted
municipal waste. Collection of such waste
separately for special treatment is necessary.
Please note that some units are equipped with
a battery safety strip. Remove the strip from the
battery compartment before first use.

NOTE The technical specifications for this product
and the contents of the user manual are subject to
change without notice.

SPECIFICATIONS

TEMP

TYPE

DESCRIPTION

MAIN UNIT
IN

TEMP

3

���������

4

Remote sensor reception indicator
Outdoor temperature
Indoor temperature
Ice alert LED indicator

NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.

BACK VIEW

SENSOR DATA TRANSMISSION
To search for a sensor:
Reset the unit.

ICON
OUT

1
2
RESET

C/ F

OUT

OUT
OUT

OUT

OUT

OUT

DESCRIPTION
Main unit is searching
for sensor(s).
A channel has been
found.
The sensor cannot be
found.

TIP The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.

If the channel 1 sensor falls between 3°C to -2 °C
(37°F to 28°F), LED indicator will flash, and will stop
flashing once the temperature is out of this range.

RESET
Press RESET to return to the default settings.

1
4
3

5

PRECAUTIONS
•
•
•

LED status indicator
Wall mount hole
Battery compartment
RESET hole
CHANNEL switch

•
•
•

GETTING STARTED

•

INSERT BATTERIES

3.

The following information is not to be used as
contact for support or sales. Please call our
customer service number (listed on our website at
www.oregonscientific.com, or on the warranty card
for this product) for all inquiries instead.
We
Name:
Address:

LxWxH

66 x 27.5 x 87.5 mm
(2.59 x 1.08 x 3.44 in)

Weight

241 g (8.5 oz) without battery

Temperature range

-5°C to 50°C (23°F to 122°F)

Resolution

0.1°C (0.2°F)

Signal frequency

433 MHz

Humidity range

25% - 95%

Humidity resolution

1%

Power

2 x UM-4 (AAA)
1.5 V batteries

REMOTE UNIT (THN132N)
LxWxH

96 x 50 x 22 mm
(3.78 x 1.97 x 0.87 in)

Weight

62 g (2.22 ounces)

Oregon Scientific, Inc.
19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
1-800-853-8883

declare that the product
Product No.:
EMR201
Product Name:
Wireless Indoor and Outdoor
Thermometer with LED Ice
Alert
Manufacturer:
IDT Technology Limited
Address:
Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference
received, including interference that may cause
undesired operation.

Temperature range

-20°C to 60°C (-4°F to 140°F)

Power

1 x UM-3 (AA) 1.5 V batteries

ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to
learn more about Oregon Scientific products. If
you’re in the US and would like to contact our
Customer Care department directly, please visit:
www2.oregonscientific.com/service/support
OR
Call 1-800-853-8883.

ICE WARNING

2

1.
2.

DECLARATION OF CONFORMITY

For international inquiries, please visit:
www2.oregonscientific.com/about/international

°C / °F: Select temperature unit
RESET: Reset unit to default settings

REMOTE SENSOR

1.
2.
3.
4.
5.

·

Transmission range 30 m (98 ft) unobstructed

The sensor reception icon in the remote sensor area
shows the status:

1.
2.

·

Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio / TV
technician for help.

Telephone No.:
2

1.
2.
3.
4.

·
·

Remove the battery compartment.
Insert the batteries, matching the polarities (see
FIG 2).
Press RESET after each battery change.

•

Do not subject the unit to excessive force,
shock, dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill
liquid over it, dry it immediately with a soft,
lint-free cloth.
Do not clean the unit with abrasive or corrosive
materials.
Do not tamper with the unit’s internal
components. This invalidates the warranty.
Only use fresh batteries. Do not mix new and
old batteries.
Images shown in this manual may differ from
the actual display.
When disposing of this product, ensure it is
collected separately for special treatment.

FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

© 2007 Oregon Scientific. All rights reserved.
P/N: 086L005000-011



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:89e967ab-2391-11dc-8b83-000d93af1be8
Create Date                     : 2007:06:15 11:08:05Z
Modify Date                     : 2007:06:26 11:01:30+08:00
Metadata Date                   : 2007:06:26 11:01:30+08:00
Creator Tool                    : Adobe InDesign CS (3.0)
Version ID                      : 1
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:057497e1-1cc3-11dc-ad7f-e578f8b6cece
Derived From Instance ID        : cdd6722f-166a-11dc-8c00-ffb13dfac302
Derived From Document ID        : adobe:docid:indd:60b534e3-89c2-11da-85b8-9881606d5deb
Derived From Version ID         : 1
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Reference Instance ID  : uuid:fc1ea7b8-f031-11db-9146-dfb55e610f63, uuid:6dfbc1a1-ef5d-11db-980f-cbe0c54fcf0f, uuid:d7d3f1d9-4578-4962-b91d-5827ecf513b7, uuid:2740e7b8-e40e-49b1-8152-b54c81d8de11
Manifest Reference Document ID  : adobe:docid:photoshop:fc1ea7b7-f031-11db-9146-dfb55e610f63, adobe:docid:photoshop:6dfbc1a0-ef5d-11db-980f-cbe0c54fcf0f, uuid:dcd39943-883f-40db-9267-239e6a747104, uuid:1ca9b967-9f16-4390-9a46-9b0d45589368
Format                          : application/pdf
Title                           : EMR201_target_UM_R4.indd
Tagged PDF                      : Yes
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0)
Producer                        : Adobe PDF Library 6.0

EXIF Metadata provided by EXIF.tools