Orient RFID Technology ECL208 Electronic Cabinet Lock User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2072237
Application ID	Vy2Sv7NoznjDJ6bBlO0jfw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.01kB (450140 bits)
Date Submitted	2013-09-16 00:00:00
Date Available	2013-09-16 00:00:00
Creation Date	2013-05-14 12:01:49
Producing Software	Acrobat Distiller 9.5.3 (Windows)
Document Lastmod	2013-09-04 11:44:12
Document Title	Microsoft Word - Fast User Guide for Electronic Cabinet Lock ECL208S 130515
Document Creator	PScript5.dll Version 5.2.2
Document Author:	888

Fast User Guide for Electronic Cabinet Lock ECL208S
The ECL208S is an electronic cabinet lock which is
Red LED
powered by 2 AAA 1.5V alkaline batteries.
Green LED
It can be unlocked with user codes or RFID user cards,
also with mechanical keys in case of emergency.
Only one master – master code or master card, factory
master setting is under master code “22446688” which
is the factory user code.
Master Code
PIN Code Keypad
RFID Key Card
Reading Range
To manage of user codes, master card, user cards and
working modes. The digit of master code can be any
4~10 digits.
Master Card
Created by master code and same function as master
Unlock Button
code.
Delete/Cancel Button
Start Position Mark
User Code (Max. 100 Codes)
Used to unlock the ECL208S. It can be any 4~10 digits.
Lock Knob
User Card (Max. 100 Cards)
Buzzer Indicator
(Invisible)
Used to unlock the ECL208S.
Cylinder Cover
Cam
Open with User Code
1. Press the user code one by one via keypad;
Security Working Mode:
2. Confirm it with
, until “beep” sounds and
open with user code and user card
green LED lights;
3. While LED green lights, turn lock knob to move cam
90°, then open door.
Open with User Card
How to reset to factory setting
1.
1. Present the user card in front of reader range until
“beep” sounds and green LED lights;
2. While LED green lights, turn lock knob to move cam
90°, then open door.
2.
To take battery out and press button 1 or 2 with holding,
then to put the battery to power on,
To hear sounds with 1 short beep tone and 1 long beep
Remark: the door must be closed manually – turn lock
tone. After 2 seconds to hear another 1 short beep tone
knob and move back cam to close position.
then LED green and red flash alternative to confirm it is
successful to back factory setting.
ECL208 has 2 working mode, default working mode or
security working mode.
Anti-peep Function
Default Working Mode:
open with user code or user card.
Successful to open if the last 15 input digital numbers
included a string valid user code.
Security Working Mode:
Example: 12345 is valid user code. You can input the below
open with user code and user card
code to open the door: 11009123452372361.
Master Code/Master Card and User Codes/User Cards Management
Function
Operation
Factory Master Code
Factory User Code
Change master code
Add master card
Add user code
…
…
Add user card
…
…
Delete an user code
…
…
Reset ECL208S
Delete all key cards
Delete all user codes
Delete all user codes
and all key cards
Set Default Mode
Set Security Mode
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : 888
Create Date                     : 2013:05:14 12:01:49+08:00
Modify Date                     : 2013:09:04 11:44:12+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : 888
Title                           : Microsoft Word - Fast User Guide for Electronic Cabinet Lock ECL208S 130515
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:09:04 11:44:12+08:00
Producer                        : Acrobat Distiller 9.5.3 (Windows)
Document ID                     : uuid:2668a543-124a-46fe-a39b-f63a2b16dc55
Instance ID                     : uuid:5c41993f-a3e4-4cff-96d7-1dcadfe3b5d6
Page Count                      : 3

EXIF Metadata provided by EXIF.tools