Origins Technology LE-201 Laser Egg 2+ smart air quality monitor User Manual LE2
Origins Technology Limited Laser Egg 2+ smart air quality monitor LE2
User manual
ABOUT YOUR LASER EGG 2+
The Laser Egg 2+ is a smart air quality monitor that measures both the total volatile organic
compounds (TVOCs) and particulate matter in the air. Laser-based light scattering is used to
determine the particulate pollution, and a MOS sensor provides accurate TVOC readings.
Take control of your indoor air quality by connecting your Laser Egg to Wi-Fi, then pair it with
other compatible smart devices in your home.
power button
micro-USB port
air intake
mode button
air outflow
STEP 1
STEP 2
WHY CONNECT?
When you use your Laser Egg for the first time, plug it in to charge the battery. Any 5V 1A
charger and micro-USB cable may be used. Hold the power button for two seconds to turn it on.
To connect your Laser Egg to Wi-Fi, download the Kaiterra app and follow
the steps for adding a new Laser Egg. Download the app at:
app.kaiterra.com
For iOS users who wish to connect first using the Home app in iOS, the Laser Egg's 8 digit
pairing code can be displayed by holding the mode button for two seconds.
Without app With app
PM2.5 & TVOC readings
Temperature readings
Humidity readings
Weather forecast
Pollution alerts
Automatic calibration
Firmware updates
MODES
Overall Index
Overall Index / AQI levels
The Overall Index is a standard developed by Kaiterra
to display a combined reading of PM2.5 and TVOC
levels. As the index increases, pollution levels and
potential health risks increase. Individual indeces are
calculated for both PM2.5 and TVOC levels, and the
higher of the two is displayed.
The overall index can incorporate national AQI
standards from a variety of countries in the PM2.5
calculation. You can use the Kaiterra app to select
which standard to use.
Use the mode button to cycle through the dierent screens on the Laser Egg. You can add or
remove screens from the cycle by changing the Laser Egg's settings in the Kaiterra app.
AQI / Index range Colour
Good 0-50
50-100
100-150
150-200
200-300
300-500
Moderate
Unhealthy for sensitive groups
Unhealthy
Very unhealthy
Hazardous
For more information about air pollution and your Laser Egg, and for more ways to connect your
Laser Egg to other smart devices in your home, visit the resources section of our website:
www.kaiterra.com
MODES
TO LEARN MORE
Particle count,
temperature, and humidity
Local weather forecast
(requires Kaiterra app)
PM2.5 concentration, used
to calculate the AQI
Getting Started
᧔กԡ抋ก괝
LASEREGG2+
CONTACT
Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety
and regulatory standards.
Laser Egg, ᳢ᨗ, Kaiterra and the Kaiterra logo are trademarks of Origins Creative Ltd. All rights reserved.
Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. App Store
is a service mark of Apple Inc., registered in the U.S. and other countries.
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0
Attribution License.
info@kaiterra.com
(+86) 400 863 0600
www.kaiterra.com
Caution:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.