Origins Technology LE-201 Laser Egg 2+ smart air quality monitor User Manual LE2
Origins Technology Limited Laser Egg 2+ smart air quality monitor LE2
User manual
ABOUT YOUR LASER EGG 2+ The Laser Egg 2+ is a smart air quality monitor that measures both the total volatile organic compounds (TVOCs) and particulate matter in the air. Laser-based light scattering is used to determine the particulate pollution, and a MOS sensor provides accurate TVOC readings. Take control of your indoor air quality by connecting your Laser Egg to Wi-Fi, then pair it with other compatible smart devices in your home. air outflow mode button power button micro-USB port air intake STEP 1 When you use your Laser Egg for the first time, plug it in to charge the battery. Any 5V 1A charger and micro-USB cable may be used. Hold the power button for two seconds to turn it on. STEP 2 To connect your Laser Egg to Wi-Fi, download the Kaiterra app and follow the steps for adding a new Laser Egg. Download the app at: app.kaiterra.com For iOS users who wish to connect first using the Home app in iOS, the Laser Egg's 8 digit pairing code can be displayed by holding the mode button for two seconds. WHY CONNECT? Without app PM2.5 & TVOC readings Temperature readings Humidity readings Weather forecast Pollution alerts Automatic calibration Firmware updates With app MODES Use the mode button to cycle through the different screens on the Laser Egg. You can add or remove screens from the cycle by changing the Laser Egg's settings in the Kaiterra app. Overall Index The Overall Index is a standard developed by Kaiterra to display a combined reading of PM2.5 and TVOC levels. As the index increases, pollution levels and potential health risks increase. Individual indeces are calculated for both PM2.5 and TVOC levels, and the higher of the two is displayed. The overall index can incorporate national AQI standards from a variety of countries in the PM2.5 calculation. You can use the Kaiterra app to select which standard to use. Overall Index / AQI levels AQI / Index range Good 0-50 Moderate 50-100 Unhealthy for sensitive groups 100-150 Unhealthy 150-200 Very unhealthy 200-300 Hazardous 300-500 Colour MODES PM2.5 concentration, used to calculate the AQI Particle count, temperature, and humidity Local weather forecast (requires Kaiterra app) TO LEARN MORE For more information about air pollution and your Laser Egg, and for more ways to connect your Laser Egg to other smart devices in your home, visit the resources section of our website: www.kaiterra.com LASEREGG2+ Getting Started ᧔กԡ抋ก괝 CONTACT www.kaiterra.com info@kaiterra.com (+86) 400 863 0600 Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Laser Egg, ᳢ᨗ, Kaiterra and the Kaiterra logo are trademarks of Origins Creative Ltd. All rights reserved. Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:05:20 19:05:51+08:00 Creator : Adobe Acrobat Pro 9.0.0 Modify Date : 2017:06:07 00:00:31+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2017:06:07 00:00:31+08:00 Creator Tool : Adobe Acrobat Pro 9.0.0 Format : application/pdf Title : LE2+ Document ID : uuid:1c5fdfce-6fc3-49a9-b047-296673a5559e Instance ID : uuid:5de1cb2e-6af1-4eb8-afb7-6b3b187b972e Producer : Adobe Acrobat Pro 9.0.0 Page Count : 7EXIF Metadata provided by EXIF.tools