Ortek Technology DFB01 Bluetooth Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3249375
Application ID	UzUtrYEizud2ZV5hyKf3rg==
Document Description	Users Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.41kB (780136 bits)
Date Submitted	2017-01-06 00:00:00
Date Available	2017-07-06 00:00:00
Creation Date	2016-12-22 14:02:14
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2016-12-22 14:02:14
Document Title	untitled

Bluetooth Keypad
DFB01
User’s Manual
About This Manual
This manual is designed to assist you in installing and using the Bluetooth Keypad. Information in
this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice.
Edition
1st Edition,
Copyright
© Copyright 2016
This document contains proprietary information protected by copyright. All rights are reserved. No
part of this manual may be reproduced by any mechanical, electronic or other means, in any form,
without prior written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the property of their respective owners.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT
This Equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into and outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
1.This Transmitter must not be co‐located or operating in conjunction with any other
antenna or transmitter.
2.“For body worn operation, this device has been tested and meets FCC RF exposure
guidelines. When used with an accessory that contains metal may not ensure
compliance with FCC RF exposure guidelines.
Notice 1
You are cautioned that changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
Notice 2
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
Caution:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Introduction
Thank you for purchasing the Bluetooth Keypad. This User’s Manual contains information that will help to
operate the device as well as answering questions about certain special keys and buttons. Please keep this
manual in a safe place for future reference
System Requirements
Hardware: Bluetooth-enabled computer (with either built-in Bluetooth capability or external
Bluetooth dongle )
Operating System: Windows XP/7/8/10
Selecting Your Operating System
This keypad is designed to work with both Windows and Macintosh OS’s. Please select OS at this point by
sliding the OS switch located at the bottom of the keypad to PC or Mac mode.
Package Contents
 Bluetooth keypad
 User’s manual
Power Switch
There is a power switch at back of the keypad. When not in use, please turn to OFF to save battery power
Note:
1. After 30 minutes non-operation, the keypad will go to low-power mode. Please press any
key to wake up and wait the blue LED turn off before using.
2. Power ON/OFF also need to press any key to reconnect and wait the blue LED turn off
before using.
Device pairing
1. Turn on the Bluetooth connection on the device
2. Turn on the keypad power and press the “CONN” button. (Please make sure the blue LED is
flashing)
3. The device will search automatically. When “Bluetooth Keyboard” shows, choose “Connect”.
4. Enter the pin code that display on the device and press “Enter”.
5. Start using the Bluetooth keyboard.
Device pairing
1.
Right click on the BT icon and choose “Explore My Bluetooth Places”
2.
Press the ‘Conn’ button at bottom of the Bluetooth keypad, then the led will start flashing.
3.
Click the “Search for devices in range” option, the “keypad” will be found.
4.
Double click on the “Keypad” icon, it will pop‐up another windows. Just follow the screen display to
input the Pin Code then press “enter” (the keypads enter).
5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No
other steps are necessary.
6. The Bluetooth icon will become to
. The Bluetooth keypad is ready to use.
Toshiba software:
1. Right click on the BT icon and choose “Add New Connection”
2. Press the ‘Conn’ button at bottom of the Bluetooth keypad, then the led will start flashing.
3. Click “Next”
4. Choose the “Keypad” device and click “Next”
5. Just follow the screen display to input the Pin Code then press “enter” (the keypads enter).
6. Click “Next”
7. The Found New Hardware Wizard appears and the OS will install the driver automatically. No
other steps are necessary.
8. The Bluetooth icon will become to
. The Bluetooth keypad is ready to use.
IVT Software:
1. Press the ‘Conn’ button at bottom of the Bluetooth keypad, then the led will start flashing.
2. Double click the BT icon on the system tray and it wills pop-up a windows. Choose “My
Bluetooth” → ” Bluetooth Device Discovery”
3. It will find the “Keypad” device. Right click on the keypad icon and choose “”Connect” → ”
Bluetooth Human Interface Device Service”
4. Just follow the screen display to input the Passkey then press “enter” (the keypads enter).
5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No
other steps are necessary.
6. The Bluetooth icon will become to
. The Bluetooth keypad is ready to use.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:12:22 14:02:14+08:00
Modify Date                     : 2016:12:22 14:02:14+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Format                          : application/pdf
Title                           : untitled
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:a57412e6-1ad8-4e52-a498-f3b7f5e5ef0a
Instance ID                     : uuid:26802900-31b8-4022-b244-b77698a73296
Page Count                      : 9

EXIF Metadata provided by EXIF.tools